Before using this product, please read "Directions for the safe use" and use it appropriately. For the performance of the product, following images of the product might be slightly different from real ones. Sterilizing Washer E2S-7000 Operating Manual
Regarding the electrolysis reducing water (function water) that you should know before using the product Classification of the electrolysis reducing water The range of nature-friendly function water that can be used safely Strong acid Acid Alkali Sterilizing water Strong Alkali Washing water Sodium hypochlorite legally valid concentration volume of catalysis Nacl (culinary salt) safe sterilization (fruit, vegetable) general sterilization (kitchen material) strong sterilization (dishcloth bleaching) Functions of e2 SPRAY!! Electrolysis sterilizing water (ion-lax) Sterilizing effect for household goods sterilizing kitchenware like knife, cutting board, dishcloth, etc., washing and sterilizing fruits and vegetables, sterilizing the drains, removing a bad smell Sterilizing effect for restaurantst sterilizing small kitchenware, sterilizing water towel to clean the table,sterilizing the drains, removing a bad smell Electrolysis washing water (detergent) Washing effect for household goods removing oil stain and old mold (alternative detergent for washing machine) Washing effect for restaurants removing oil stain, washing grill plate and so on (alternative chemical detergent)
Regarding the electrolysis reducing water (function water) that you should know before using the product Examples of applying the electrolysis sterilizing classification volume of catalysis (salt) application Examples of applying the electrolysis washing water (potassium carbonate) classification volume of catalysis (potassium carbonate) application spray container 1-1.5g safe sterilization 1g (1 spoon) spray sterilization of tables in restaurants sterilization of food materials, such as vegetables, fruits, etc. (decomposition of agricultural chemicals) spray container 1-2g removing old stain and oil stain on the kitchen wall, etc. large container general sterilization 2g (2 spoons) sterilization of dishcloth, knife, cutting board, and dishes large container 2-3g washing laundry, oil stain, frying pan, grill plate, etc. strong sterilization 3g (3 spoons) bleaching the dishcloth, sterilizing the drains, and so on For the safe sterilization, the product is not working in case of using excessive catalysis.
User guide How to use - easy instructions for everyone - connect it to the electric source (The light of Muldori (water-boy) charater is on.) classification after pouring water up to the max. line of the container (1-1.2L), add 1-3g of catalysis (salt or potassium carbonate) the container on the main controller. According to the container, the corresponding indicator is automatically on. The indicator of "stand-by mode" is on. The operation indicator is flashing in regular sequence. Press the "START" button. connect it to the electric source (The light of Muldori (water-boy) charater is on.) After 1 or 2 min., only the center of the operation indicator is blinking with "beep" sound, indicating the completion of the manufacturing process. (informing twice at 30 sec. intervals.) Although you press the START button again without using the manufactured water (without replacing the container), the device does not operate. (Only the container indicator is blinking.) In case of too much catalysis or too little water, with "beep" sound, the operation indicator and the stand-by mode indicator are blinking fast, indicating warning. Depending on the volume of catalysis, the property of water produced varies. (safe sterilization 1g/ general sterilization 2g/ strong sterilization 3g)
User guide Making sterilizing water (ion-lax) The range of nature-friendly function water that can be used safely 1. Fill the tap water (or filtered water, underground water) in the spray container or storage container up to the marked line, and then place it on the main body. (At this time, fit the arrow on the container to the arrow on the main body.) 2. Put one to two measuring spoons (1-3g) of the designated catalysis or the catalysis used at home (possible to use refined salt, but impossible to use burned salt and flavored salt). 3. Check the stand-by mode indicator on the main body, and press the button. 4. With "beep" sound, the water is automatically electrolyzed for about 1-2 minutes, and then sterilizing water is created. (The operation indicator and the floodlight are on, and a lot of white bubbles rise.) 5. When the sterilizing water is created, it generates the completion signal of "beep-beep" sound twice at 30 second intervals. Making washing water (detergent) 1. Fill the tap water (or filtered water, underground water) in the spray container or storage container up to the marked line, and then place it on the main body. (At this time, fit the arrow on the container to the arrow on the main body.) 2. Put one to two measuring spoons (1-3g) of the catalysis (potassium carbonate) provided by the manufacturer. 3. Check the stand-by mode indicator on the main body, and press the button. 4. With "beep" sound, the water is automatically electrolyzed for about 1-2 minutes, and then sterilizing water is created. 5. When the sterilizing water is created, it generates the completion signal of "beep-beep" sound twice at 30 second intervals. Advisable amount of catalysis with the measuring spoon depending on the container: spray container (600mL): about one to two spoons (1-2g) large storage container (1,200mL): about one to three spoons (1-3g)
Components and contents of the product Large container (large capacity) spray container (spray) controller main body (container support) electric source provider the others, catalysis container and spoon -material: transparent or semi-transparent PC -capacity: 1,200ml -separative design from the main body -including electrolysis part -material: transparent or semi-transparent PC -capacity: 600ml -including electrolysis part -MICOM automatic control -adoption of electrostatic touch-switch -function of detecting the container automatically -function of detecting the catalysis volume automatically -function of washing the electrode automatically -external adapter with safe structure -AC100-240V, 50-60Hz SMPS method -capacity of the catalysis container: salt 80g, potassium carbonate 140g -capacity of spoon: 1-1.2g
The name of each part and its product specification Components and contents of the product mouth, opening for pouring water spray container part -capacity: 600mL, 1,200mL electrode connecting pin front display panel electric control part electrolysis part (electrode part) lighting part electric source provider (SMPS) (for both 100/240V) 1. spray container indicator (capacity: 600mL) 2. storage container indicator (capacity: 1,200mL) 3. stand-by mode (blinking) - Indicating stand-by mode 4. start button 5. waterdrop indicator (operation indicator) - during the operation, diffusion of light 6. HYUNDAI logo - indicating electric power status
Product specifications model name rated voltage rated power consumption incoming voltage durability of electrode sterilizing power manufacturing duration of function water used catalysis controlling method E2S-7000 AC 100-240V 50/60Hz 45W DC 12V 3.5A about 5 years over 99.9% 1-2 min. sterilization: salt(nacl 80g), washing: potassium carbonate (K2Co3 140g) MICOM automatic control product size materials PC, ABS components spray container (600mL), large capacity storage container (1,200mL), controller main body, electric source provider, catalysis container (100mL), spoon (1g)
Check points before calling your service provider Problem Check points Solution nothing on the LCD display panel Only the center of the operation indicator (diffusion of waterdrop) is blinking. White bubbles does not rise in the water! Why does "beep" sound keep ringing? I pressed the start button again, but only the container indicator is blinking without the operation. Operation indicator, container indicator, and stand-by indicator are blinking fast with "beep-beep" sound. Is the electric power connected properly for AC adapter and behind of the main body? Did you press the "START" button? Did you put catalysis? Is it ringing for 1 min. at 30 sec. intervals, after the completion of the production? Did you press the start button again for the already-manufactured water? Did you put too much catalysis? Put the plug into the socket and connect the adapter to the main body properly. It's normal. When the electrolysis is completed, only the center of the operation indicator (diffusion of waterdrop) is blinking. Oxygen, hydrogen, and chlorine gas are created during the electrolysis. Only when the catalysis reacts with the gases, white bubbles rise and electrolysis water is created. For the normal process, production using electrolysis is completed in 1 min. 30sec. after pressing the start button. The "beep" sound indicates the completion of the production and rings twice at 30 sec. intervals. Therefore, you just need to use it as sterilizing water or washing water after the beep sound. After the operation is completed and electrolysis water is made, the device is not reoperating due to the safety reason. (You can just use the water.) Standard capacity for spray container (600mL) is one measuring spoon (1g), and that for large container (1,200mL) is one and half measuring spoon. If the capacity is exceeded, it is designed not to operate due to the safety reason. When you put too much catalysis comparing with water volume, please discard the water, fill new water, add proper amount of catalysis, and then operate the device again.
Directions for the safe use "Directions for the safe use" aim to guide users to use this product safely and appropriately, and protect them in advance from unexpected danger or damage. Therefore, please keep the important directions for the safety by all means. Expected directions for the use are classified with WARNING and CAUTION. WARNING CAUTION When the directions are violated, serious injury or death is expected. When the directions are violated, light injury or product damage is expected. WARNING You must use the original adapter for the electric source, provided by the manufacturer. [It can lead to fire or product damage.] Do not put the plug into the socket with wet hands. [It can lead to electric shock or fire.] Do not bend nor pull the electric cord excessively. [It can lead to fire due to electric shock or short circuit.] Do not give severe shock to the product nor dissemble and repair it on your own authority. [It can lead to product damage, fire, or electric shock.] Do not use this product in the area where there is risk for the product to get wet or moisturized, such as in the bath room, the shower room, or outside. [It can lead to product damage, fire, or electric shock.] You must be careful so that water does not get into the controller main body. [Particularly, since the electrode of the connecting part to the container is conductive, it can lead to electric shock or fire.]
Directions for the safe use CAUTIONS Produce it as much as necessary, and use it where it is necessary. Keep it away from children. Do not keep the completed electrolysis water in the refrigerator.(it can be confused with drink water.) When creating strong sterilizing water, the complex gas with oxygen, hydrogen, and chlorine is generated. Therefore, do not breath the air in the container, when transferring it into another container. Never drink catalysis nor produced electrolysis water. When producing electrolysis water in a closed place, do not use fire around the outlet. [It can lead to explosion because of the creation of oxygen, hydrogen, and chlorine gas.] Never spray toward eyes of human beings and use it only for the sterilizing and washing purpose. Do not move it during the operation. [The leakage of electrolysis reducing water can lead to electric shock or product damage.] Unplug it from electric source after the use. Do not expose this device directly to the sun. [It can lead to fire or damage.] Never put too much catalysis. [Depending on the amount of catalysis, toxic material can be created.] (For the safe sterilization, the device automatically stops its operation in case that excessive catalysis is used.) Use the designated catalysis only. [It has influence on the durability of the product.] Sterilizing and washing power of electrolysis water can be reduced in case of long-term keeping. After the sterilizing process with more than general sterilization, rinsing process must be applied. Electrolysis sterilizing water should be used only for sterilization. Electrolysis washing water should be used only as washing water. This product can be used with electric source of AC 100-240V, 50/60Hz.
Guarantee This product is guaranteed as follows. product name Model name place of purchase name of customer address of customer term of guarantee date of purchase telephone number telephone number e-mail for 1 year after the date of purchase year, month, date 1. This product was made through a series of thorough and strict inspection processes. 2. In case that our product has functional defects during the term of quality guarantee and that the defects are caused by normal use, our company will repair them without charge, and if it is not possible to repair the product, it will be exchanged with new one. This guarantee can not be applied in following cases, and consequently the product can be repaired with charge. 1) When the malfunction or damage of the product occurred after the term of guarantee was expired 2) When the customer caused the damage on purpose or by mistake 3) When other repair center caused the damage 4) When the damage was caused by malfunction of the electric source or connector (regardless of the term of guarantee) 5) When the durability of the part itself is over (only when it is included in the operating manual) 6) When a natural disaster caused the damage or defect of the product 3. If you want our company to repair the product, please contact our customer service center. This product will be exchanged, repaired, or paid back in case of justifiable customer damage, based on the compensation regulations of customer damage notified by Ministry of Finance and Economy. The cases not written in this guarantee will follow the compensation regulations of customer damage item by item. WacorTec.Co.,Ltd. 684-49, Gongreung - Dong, Nowon - Ku, Seoul, Korea http://www.hyundaiwater.com