TM roof products Roof products for a complete ventilation system Power roof ventilator, radon fan, exhaust air hood, venting hood. With roof ducts for various roof coverings. Smart solution for all roof slopes. Manufactured from weatherproof polypropylene. Power-efficient and quiet fans. Five different colours. HOME VENTILATION 1
General Material The ROOF roof products are made of polypropylene. The material is weather-resistant and entirely maintenancefree. Colours The ROOF roof products are available in five different colours, selected to match most roof coverings. For technical printing reasons, the actual colours may deviate compared to this document. Colour Nearest RAL colour Nearest NCS colour Black RAL 9055 S 9000-N Dark grey RAL 7015 S 7502-B Brown RAL 8015 S 8005-Y80R Red RAL 3009 S 5040-Y90R Brick red RAL 8004 S 4040-Y80R ROOF power roof ventilator HI-11 radon fan Suitable as an extract air fan for building foundations. Connection to Ø 110 mm plastic pipes. Fan 1-phase 230 V, 60 W, max. airflow 50 l/s. Controls via: - On/off switch, 1 speed, 50 l/s. - Separate transformer, 3 speeds within the range 20-50 l/s (accessory). - Thyristor, steplessly adjustable within the range 20-50 l/s (accessory). HI-12 power roof ventilator Suitable as an extract air fan for a cooker hood or general ventilation. Connection to Ø 125 mm metal pipes. Fan 1-phase 230 V, 72 W, max. airflow 80 l/s. Controls via: - Separate transformer, 3 speeds within the range 20-80 l/s (accessory). - Cooker hood with integrated transformer, 4 speeds within the range 20-80 l/s (accessory). - Thyristor, steplessly adjustable within the range 20-80 l/s (accessory). HI-12E power roof ventilator Suitable as an extract air fan for a cooker hood or general ventilation. Connection to Ø 125 mm metal pipes. Anti-condensation insulated and soundproof. Fan 1-phase 230 V, 72 W, max. airflow 80 l/s. Controls via: - Separate transformer, 3 speeds within the range 20-80 l/s (accessory). - Cooker hood with integrated transformer, 4 speeds within the range 20-80 l/s (accessory). - Thyristor, steplessly adjustable within the range 20-80 l/s (accessory). HI-16E power roof ventilator Suitable as an extract air fan for a cooker hood or general ventilation. Connection to Ø 160 mm metal pipes. Anti-condensation insulated and soundproof. Fan 1-phase 230 V, 85 W, max. airflow 100 l/s. Controls via: - Separate transformer, 3 speeds within the range 20-100 l/s (accessory). - Cooker hood with integrated transformer, 4 speeds within the range 20-100 l/s (accessory). - Thyristor, steplessly adjustable within the range 20-100 l/s (accessory). 2
ROOF exhaust air hood UH-12 exhaust air hood Suitable as an exhaust air hood for ventilation units. Connection to Ø 125 mm metal pipes. Max. airflow 100 l/s at 30 Pa. UH-16 exhaust air hood Suitable as an exhaust air hood for ventilation units. Connection to Ø 160 mm metal pipes. Max. airflow 130 l/s at 30 Pa. ROOF venting hood TP-11 venting hood Suitable as a venting hood for drainage systems. Connection to Ø 110 mm plastic pipes. Uninsulated. TPE-11 venting hood Suitable as a venting hood for drainage systems. Connection to Ø 110 mm plastic pipes. ROOF LPV roof duct kit LPV roof duct kit (Required for all products) Provides a watertight, functional roof duct comprising power roof ventilator, exhaust air hood and venting hood. Suitable for various roof slopes up to 45 (see also the Installation section). For three different types of roof: - LPV-T for clay/concrete roof tiles. - LPV-P for profiled sheet steel. - LPV-H for rebated sheet steel and bitumen. - LPV-HL for roofing membrane LPV-T for clay/ concrete roof tiles ALPV roof seal LPV-P for profiled sheet steel ALPV roof seal made of soft plastic material is included in LPV-T and LPV-P. LPV-H for rebated sheet steel and bitumen LPV-HL for roofing membrane 3
Controlling power roof ventilators General The power roof ventilators can be controlled via a switch, cooker hood with integrated transformer or a separate transformer. Via switch Suitable when the fan is only required to operate at one speed, e.g. for radon fan HI-11. Purchased separately from electrician. Function: On/Off. Via cooker hood Suitable when the power roof ventilator is used for the cooker hood. The power roof ventilator is controlled by the integrated transformer from the cooker hood s control panel. Function: The fan speed is regulated in fixed steps, e.g. low flow, normal flow, boost. See the product datasheet: Cooker hoods. Via Transformer Suitable when the ability to regulate the airflow in fixed steps is required, e.g. low flow, normal flow, boost. Power supply 230 V, 50 Hz. 3 optional voltages out of a possible 16, as well as stop. Enclosure Class IP 44. Max. fan power 390 W. Rated current 1.7 A. Transformer dimensions 175x78x125 mm. Variants Transformer and control panel in the same enclosure. Transformer and separate control panel for flush mounting. For surface mounting, the control panel can be placed in a junction box. Transformer without control panel. Transformer with control panel in the same enclosure. Accessories Several different accessories, such as a boosting timer, can be connected for demand-controlled ventilation. See product datasheet Control equipment. Transformer with separate control panel. 4
Installation Example for roof with clay/concrete tiles 1 2 3 4 5 6 Once a hole has been made in the suspended ceiling, roof seal ALPV is installed from below up through the roof (1-4). The protruding edge prevents condensation from penetrating. Roof duct LPV is installed on the roof covering (5), after which the power roof ventilator/hood is installed over the duct (6). Thanks to the design of the roof duct, various roof slopes can be handled. The power roof ventilator/hood is positioned vertically above the roof duct and screwed into place (7). 7 5
Sizing HI-11 radon fan HI-12 power roof ventilator HI-12E power ROOF ventilator HI-16E power roof ventilator UH exhaust air hood 6
Dimensions HI-11 radon fan Weight: 5 kg HI-12 power roof ventilator Weight: 6 kg HI-12E power roof ventilator Weight: 7 kg HI-16E power roof ventilator Weight: 8 kg UH-12 extract air hood Weight: 4 kg UH-16 extract air hood Weight: 5.5 kg TP-11 venting hood Weight: 1.6 kg TPE-11 venting hood Weight: 2.7 kg 7
Ordering key ROOF HI Radon fan Condensation insulated, for Ø 110 mm duct HI-11 M, black HI-11 H, dark grey HI-11 R, brown HI-11 P, red HI-11 T, brick red ROOF HI power roof ventilator Condensation insulated, for Ø 125 mm duct HI-12 M, black HI-12 H, dark grey HI-12 R, brown HI-12 P, red HI-12 T, brick red 10511M 10511H 10511R 10511P 10511T 10512M 10512H 10512R 10512P 10512T Condensation insulated and sound-proof, for Ø 125 mm duct HI-12E M, black 10512EM HI-12E H, dark grey 10512EH HI-12E R, brown 10512ER HI-12E P, red 10512EP HI-12E T, brick red 10512ET Condensation insulated and sound-proof, for Ø 160 mm duct HI-16E M, black 10516EM HI-16E H, dark grey 10516EH HI-16E R, brown 10516ER HI-16E P, red 10516EP HI-16E T, brick red 10516ET ROOF UH exhaust air hood Condensation insulated, for Ø 125 mm duct UH-12 M, black UH-12 H, dark grey UH-12 R, brown UH-12 P, red UH-12 T, brick red Condensation insulated, for Ø 160 mm duct UH-16 M, black UH-16 H, dark grey UH-16 R, brown UH-16 P, red UH-16 T, brick red 10712M 10712H 10712R 10712P 10712T 10716M 10716H 10716R 10716P 10716T ACCESSORIES ROOF LPV roof duct kit (Required for all roof products, type and colour are selected) For clay/concrete roof tiles LPV-T M, black LPV-T H, dark grey LPV-T R, brown LPV-T P, red LPV-T T, brick red For profiled sheet steel LPV-P M, black LPV-P H, dark grey LPV-P R, brown LPV-P P, red LPV-P T, brick red For rebated sheet steel and bitumen LPV-H M, black LPV-H H, dark grey LPV-H R, brown LPV-H P, red LPV-H T, brick red For roof membrane LPV-HL M, black LPV-HL H, dark grey LPV-HL R, brown LPV-HL P, red LPV-HL T, brick red Control equipment, power roof ventilator Transformer With integrated control panel With separate control panel Without control panel Demand regulation (control) See product datasheet: Control equipment 10810M 10810H 10810R 10810P 10810T 10820M 10820H 10820R 10820P 10820T 10830M 10830H 10830R 10830P 10830T 10831M 10831H 10831R 10831P 10831T 105ILSY 105ILY 105IY ROOF TP venting hood Uninsulated, for Ø 110 mm duct TP-11 M, black TP-11 H, dark grey TP-11 R, brown TP-11 P, red TP-11 T, brick red Condensation insulated, for Ø 110 mm duct TPE-11 M, black TPE-11 H, dark grey TPE-11 R, brown TPE-11 P, red TPE-11 T, brick red 107WM 107WH 107WR 107WP 107WT 107WEM 107WEH 107WER 107WEP 107WET 8