SAFETY SHOWES & EYEWASHES EOSAFE 10 AXION Solutions for Laboratories Healthcare Manufacturing & hemical Handling Facilities Mining & Petroleum Oil & Gas efineries
AXION by GENTE AXION s ground-breaking technology continues to change the emergency response landscape by offering the only medically consistent solution in the industry. AXION MS is the only eye/face wash duplicating the methodology recommended and used by medical professionals. AXION was developed by Haws, a leader in safety equipment. Haws and have joined together to bring the AXION Medically Superior esponse product offering to the Australian emergency/safety shower and eyewash market. This inventive lineup provides users with enhanced injury reduction, superior victim comfort, complete ANSI victim compliance, and a more reliable choice of products anywhere safety equipment is required. Market Usage Laboratories, Hospitals, hemical Manufacturing & Handling Facilities, Mining, Petroleum, Oil & Gas efineries Technology Traditional eyewashes irrigate from the outside edge of the eye back toward the nose where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature s ocular cavity drain. AXION MS provides an inverted flow design consistent with all EMT, emergency room and doctors office protocols by sweeping contaminants away from the vulnerable nasal cavity. Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced victim comfort, stability and effectiveness. Important Details AXION MS eye/face wash models feature inverted water streams and smooth laminar flow that provides comfortable water pressure. Pedestal and wall units are equipped with chrome-plated brass stay-open ball valves with stainless steel ball and stem, chrome-plated brass in-line 50 x 50 mesh water strainer, and a yellow plastic pop-off dust cover for the eye/face wash head. Pipe and fittings are constructed of 1-1/4 stainless steel. Waste: 1-1/4 IPS. Units come with a universal sign. AXION MS combination drench shower and eye/face wash models feature inverted water streams and smooth laminar flow that provides comfortable water pressure. The drench showerhead is hydrodynamically designed to minimize the strong physical pressure, making the distribution equal across the entire footprint of the water flow. ombination unit models have a chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Pipe and fittings are constructed of stainless steel. A stainless steel push flag activates the eye/face wash, and the shower activates with the pull of the stainless steel shower rod. Models include self-adhesive high-visibility safety green and bright yellow stripes, universal sign, and 1-1/4 IPS supply and waste. DID YOU KNOW? 88% of Units Are Not ANSI Z358.1 ompliant. OMPLIANT: 12% NON-OMPLIANT: OTHE, 10% Standard / ompliances Install products in confidence. Our products are tested and certified to AS/NZ 4775 and OMK30046. s are certified by SA to meet the ANSI Z358.1. As operates globally, please note that some products in this range have not been tested to AS 4775. efer to for more information NON-OMPLIANT: PEFOMANE ELATED, 78% Warranty Our standard warranty terms and conditions for the AXION by range is 5 years. Warranty does not cover damages to the product caused by the effects of its environment and damages caused by harmful chemicals in its surroundings. For further information, please refer to our standard warranty terms and conditions of sale. Installation must be installed in accordance with manufacturer s recommendations and to AS/NZ3500. It is recommended that a strainer is installed prior to the installation of this product and pressure does not exceed the manufacturer s recommendations. s ombining leading edge, technology, design, innovation The Australia product offering delivers fit for purpose products that are globally recognised, designed and manufactured to incorporate the best technology, sustainability and durability for any commercial application.
THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS MAKE SPEIFIATIONS AND MEASUEMENTS SUBJET TO HANGE WITHOUT NOTIE. 11" THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS MAKE SPEIFIATIONS AND MEASUEMENTS SUBJET TO HANGE WITHOUT NOTIE. 1. DIMENSIONS MAY VAY BY ± 1/2 INH [13mm]. 2. TO OMPLY WITH ANSI Z358.1-2009 FO EMEGENY EYEWASH O EYE/FAE WASH AND SHOWE EQUIPMENT: - UNIT SHALL BE INSTALLED IN AODANE WITH MANUFATUE'S INSTUTIONS AND AEPTABLE PLUMBING PATIES. - EYEWASH O EYE/FAE WASH SHALL BE POSITIONED WITH NOZZLES NOT LESS THEN 83.8 M (33 IN.) AND NO GEATE THAN 114.3 M (45 IN.) FOM SUFAE ON WHIH USE STANDS AND 15.3 M (6 IN.) MINIMUM FOM WALL O NEAEST OBSTUTION. - SHOWE SHALL BE POSITIONED SO THAT SHOWE HEAD IS NOT LESS THAN 208.3 M (82 IN.) NO MOE THAN 243.8 M (96 IN.) FOM SUFAE ON WHIH USE STANDS. - SHOWE SPAY PATTEN SHALL HAVE A MINIMUM DIAMETE OF 50.8 M (20 IN.) AT 152.4 M (60 IN.) ABOVE SUFAE ON WHIH USE STANDS, AND ENTE OF SPAY PATTEN SHALL BE LOATED AT LEAST 40.6 M (16 IN.) FOM ANY OBSTUTION. 3. DO NOT USE EGULA PIPE SEALANT. IF NEESSAY USE DOW ONING 832 SEALANT PLAING 5 SMALL BEADS ON THE MALE THEADS, JUST ABOVE THE FIST THEAD. THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS MAKE SPEIFIATIONS AND MEASUEMENTS SUBJET TO HANGE WITHOUT NOTIE. EN NO. EVISED PE BY: 4290 EN: 4842 PF I. OBETS 7/13/10 PAT NUMBE: DAWING NO.: SALE: 1/18 DAWING TYPE: SPAKS, NEVADA 89431 (775) 359-4712 FAX (755) 359-7424 EN NO. EVISED PE BY: PAT NUMBE EN: 4938 VW DAWING NO. EV SLS 04/25/08 FV 01/08/15 SALE: 1:1 DAWING TYPE: EN NO. EVISED PE BY: PAT NUMBE EN: 4976 HM EVISION H 05/91 VW FV 10/21/15 SALE: 1:1 DAWING TYPE: EV. AXION by GENTE EMEGENY SHOWES & EYE/FAE WASHES EO1000 3 11" 280mm SP829 25" 635mm 9 3 8" 238mm L-STAINE 82" 2083mm 65 3 MINIMUM 8" 1661mm 412" 1 1056mm FLOO LINE IPS (272") 1 (699mm) 894" 1 2266mm 61 3 4" 1567mm 62" 1 167mm WASTE IPS 30 AXION ombination Floor-Mounted Shower and Eye/Face Wash with Stainless Steel Bowl TOP VIEW EO1000FP With Foot Pedal * is supplied without Shower 3X ø 3/8" 9.5mm ose. Please contact if 8" ø Shower ose B.. 203mm is required. SALE 10:1 9" ø 229mm 0002080162.D 8300-8309/8300P-8309P 09459A00 23 2014 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. 11" 279mm 3 26" 660mm IPS EO1010 AXION ombination Floor-Mounted Shower and Eye/Face Wash without Bowl 27-1/2" 699mm EYE/FAE WASH DETAIL EO1010FP With Foot Pedal 83 5/8" 2124mm 8 7/8" 225mm 4 63 1/2" 1613mm 3X 120 3/8" 3X Ø 9.5mm 8" Ø 203mm B.. 66 5/8" 1692mm 42 3/4" 1086mm OUPLING * 9" Ø is supplied without Shower 229mm ose. Please contact if MOUNTING DETAIL Shower ose is required. FLOO LINE 1. DIMENSIONS MAY VAY BY ± 1/2 INH [13mm]. 4 OIENT TAB ON EYE/FAEWASH TOWADS BAK OF SHOWE. 2. TO OMPLY WITH ANSI Z358.1-2009 FO EMEGENY EYEWASH O EYE/FAE WASH AND SHOWE EQUIPMENT: - UNIT SHALL BE INSTALLED IN AODANE WITH MANUFATUE'S INSTUTIONS AND AEPTABLE PLUMBING PATIES. - EYEWASH O EYE/FAE WASH SHALL BE POSITIONED WITH NOZZLES NOT LESS THEN 83.8 M (33 IN.) AND NO GEATE THAN 114.3 M (45 IN.) FOM SUFAE ON WHIH USE STANDS AND 15.3 M (6 IN.) MINIMUM FOM WALL O NEAEST OBSTUTION. - SHOWE SHALL BE POSITIONED SO THAT SHOWE HEAD IS NOT LESS THAN 208.3 M (82 IN.) NO MOE THAN 243.8 M (96 IN.) FOM SUFAE ON WHIH USE STANDS. - SHOWE SPAY PATTEN SHALL HAVE A MINIMUM DIAMETE OF 50.8 M (20 IN.) AT 152.4 M (60 IN.) ABOVE SUFAE ON WHIH USE STANDS, AND ENTE OF SPAY PATTEN SHALL BE LOATED AT LEAST 40.6 M (16 IN.) FOM ANY OBSTUTION. MOUNTING HADWAE NOT SUPPLIED. * 5. 8317 SPAKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 3 DO NOT USE EGULA PIPE SEALANT. IF NEESSAY USE DOW ONING 832 SEALANT PLAING 5 SMALL BEADS ON THE MALE THEADS, JUST ABOVE THE FIST THEAD. 2 SHOWE HEAD MUST BE POSITIONED IN-LINE WITH EYE/FAEWASH HEAD TO ALLOW FOSHOWE EYE/FAE WASH OMBINATION SIMULTANEOUS USE BY THE SAME USE PE ANSI Z358.1. 2015 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. 0002080152.D 21 EO1050 2 STAINLESS STEEL SHOWE HEAD WITH 20 GPM FLOW ONTOL 1" S.S. ELBOW (SUPPLIED) (5-3/4") (146mm) ø 10-1/2" 267mm FLANGE HANGE BAKET (NOT SUPPLIED) ESUTHEON (SUPPLIED) 1 X 36" S.S. NIPPLE (SUPPLIED) 1" IPS AND FITTINGS (NOT SUPPLIED) AXION Barrier-free, ecessed ombination Shower and Eye/Face Wash with Drain Pan "PANI BA" FO ATIVATING EYE/FAE WASH 4X 4-1/2" 114mm 22" 559mm 6X * Ø3/16" 4.8mm MOUNTING HOLE 82"-96" 2083mm-2438mm 36" 914mm SHOWE "PANI BA" IN THE OFF POSITION ATIVATION POSITION 3-1/2" 89 mm 32" 813mm 23-5/16" 592mm 1" IPS BASS STAY OPEN BALL VALVE WITH INLET AND OUTLET UNION (47-1/2") (1207mm) BALL 2X DETENT * PULL DOWN TO OPEN EYE/FAE WASH 30-1/4" 768mm DWG. NO. 15919A00 1" IPS FEMALE INLET 18-3/4" 476mm 6-5/16" 160mm 2" NPT FEMALE OUTLET EMOVABLE AESS PANELS (NOT SHOWN) IN-LINE STAINE HOUSING (34-5/8") (879mm) FLOO LINE (29-5/8") (752mm) 1" 25mm FLANGE ALL AOUND 21-7/8" 556mm TO FINISHED FLOO (BOTTOM OF OUGH IN) 2013 Haws orporation - All ights eserved 8356WW SPAKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 0002080172.D 15919A00 5 HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. Applicable Market ommercial Health Industrial Hospitality Scientific 3
THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS MAKE SPEIFIATIONS AND MEASUEMENTS SUBJET TO HANGE WITHOUT NOTIE. THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS MAKE SPEIFIATIONS AND MEASUEMENTS SUBJET TO HANGE WITHOUT NOTIE. THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS MAKE SPEIFIATIONS AND MEASUEMENTS SUBJET TO HANGE WITHOUT NOTIE. 1. METI DIMENSIONS AE IN BAKETS [X]. 2. TO OMPLY WITH ANSI Z358.1-2009 FO EMEGENY EYEWASH O EYE/FAE WASH: - UNIT SHALL BE INSTALLED IN AODANE WITH MANUFATUE'S INSTUTIONS AND AEPTABLE PLUMBING PATIES. - EYEWASH O EYE/FAE WASH SHALL BE POSITIONED WITH NOZZLES NOT LESS THEN 83.8 M (33 IN.) AND NO GEATE THAN 114.3 M (45 IN.) FOM SUFAE ON WHIH USE STANDS AND 15.3 M (6 IN.) MINIMUM FOM WALL O NEAEST OBSTUTION. 3. DIMENSIONS MAY VAY BY ± 1/2 [13]. THIS DOUMENT IS TUE AND OET AT TIME OF PUBLIATION. ONTINUED PODUT IMPOVEMENTS MAKE SPEIFIATIONS AND MEASUEMENTS SUBJET TO HANGE WITHOUT NOTIE. SINK (EF.) 3-3/4" 95mm 3-1/4" 83mm 7" 178mm AP SET SEW 3 1/4" 83mm EN NO. EVISED PE BY: EN: 4910 HM H 02/91 1-1/2" MAX. 38mm 3 Ø3/32" 2.4mm 1. WHEN INSTALLING THIS UNIT, LOAL, STATE, O FEDEAL ODES SHOULD BE ADHEED TO FO DIMENSIONS (LOATIONS), WASTE AND EQUIEMENTS OTHE THAN SHOWN. 2. THE ANSI Z358.1-2009 STANDAD SPEIFIES EYEWASH NOZZLE HEIGHTS TO BE 83.8cm (33 IN.) TO 114.3cm (45 IN.) ABOVE THE FLOO AND 15.3cm (6 IN.) MINIMUM FOM WALL O NEAEST OBSTUTION. 3 DILL ONE Ø7/8" [22mm] HOLE AND ONE Ø3/32" HOLE WHEE UNIT IS TO BE INSTALLED. EFE TO MOUNTING HOLE DETAIL. 4. THESE DIMENSIONS MAY VAY ±1/2" [6.4mm]. 5 ASSEMBLE EYE/FAE WASH TO AM, OIENT TAB ON ASSEMBLY AWAY FOM USE. EN NO. EVISED PE BY: EN: 4910 HM H 02/91 SPAKS, NEVADA 89431 (775) 359-4712 FAX (755) 359-7424 PAT NUMBE DAWING NO. SALE: 1:10 DAWING TYPE: MIN. LEAANE 2" 51mm OLL PIN 6" 152mm SPAKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 EN NO. EVISED PE BY: PAT NUMBE 4110 EN: 4910 HM 0002080042.D 7360B-7460B/7360BT-7460BT DAWING NO. EV I 4/28/08 08808A00 11 SALE: 1:1 DAWING TYPE: 3 16-1/2" 419mm 5 Ø 7/8" 22mm Ø3/32" 2.4mm SPAKS, NEVADA 89431 (775) 359-4712 FAX (755) 359-7424 PAT NUMBE 2-3/8" 60mm LOKNUT 1/2" O.D. (OLD) 3/4" 19.1 mm DAWING NO. SALE: 1:10 DAWING TYPE: WALL EV 16-7/8" 429mm SEAL BASE WITH SILIONE AULK SPAKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 EN NO. EVISED PE BY: PAT NUMBE 2066 EN: 5005 HM 0002080067.D 7610 EVISION JF 10/96 VH PULLDOWN EYE/FAE WASH 14 FV 06/25/15 SALE: 1:1 DAWING TYPE: SIZE: A SHEET 1 OF 2 EV AXION by GENTE EMEGENY EYE/FAE WASHES EO4000 TOP VIEW 32mm 15" 381mm Ø 1 Ø 286mm OBSTUTION 6" MIN. 152mm AXION Floor-Mounted Pedestal ABS Plastic Eye/ Face Wash with Stainless Steel Bowl SIGN IS TO BE POSITIONED SUH THAT IT IS VISIBLE WITHIN THE AEA SEVED BY THE EYEWASH 4-1/8" 105mm L-STAINE Ø 9" Ø229mm 3X Ø 3/8" Ø 10mm *38" 965mm *32-3/8" 822mm 1/2" IPS MOUNTING DETAIL Ø 8" Ø 203mm B.. FLOO LINE *6-3/4" 171mm 1. TO OMPLY WITH ANSI Z358.1-2009 FO EMEGENY EYEWASH AND EYE/FAE WASH: - UNIT SHALL BE INSTALLED IN AODANE WITH MANUFATUE'S INSTUTIONS AND AEPTABLE PLUMBING PATIES. - EYEWASH O EYE/FAE WASH SHALL BE POSITIONED WITH NOZZLES NOT LESS THAN 83.8 M (33IN.) AND NO GEATE THAN 114.3 M (45 IN.) FOM SUFAE ON WHIH USE STANDS AND 15.3 M (6 IN.) MINIMUM FOM WALL O NEAEST OBSTUTION. 2. *THESE DIMENSIONS MAY VAY ± 1/2" [12.7mm] 2014 7361-7461 IPS WASTE Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. 0002080056.D 09208A00 14 EO4000FP TOP VIEW 32mm 15" 381mm Ø 1 Ø 286mm OBSTUTION 6" MIN. 152mm AXION Floor-Mounted Pedestal Eye/Face Wash with Stainless Steel Bowl and Foot Pedal SIGN IS TO BE POSITIONED SUH THAT IT IS VISIBLE WITHIN THE AEA SEVED BY THE EYEWASH 4-1/8" 105mm L-STAINE Ø 9" Ø229mm Ø 3/8" 3X Ø 10mm *38" 965mm *32-3/8" 822mm 1/2" IPS Ø 8" Ø 203mm B.. MOUNTING DETAIL FLOO LINE *6-3/4" 171mm 1. TO OMPLY WITH ANSI Z358.1-2009 FO EMEGENY EYEWASH AND EYE/FAE WASH: - UNIT SHALL BE INSTALLED IN AODANE WITH MANUFATUE'S INSTUTIONS AND AEPTABLE PLUMBING PATIES. - EYEWASH O EYE/FAE WASH SHALL BE POSITIONED WITH NOZZLES NOT LESS THAN 83.8 M (33IN.) AND NO GEATE THAN 114.3 M (45 IN.) FOM SUFAE ON WHIH USE STANDS AND 15.3 M (6 IN.) MINIMUM FOM WALL O NEAEST OBSTUTION. 2. *THESE DIMENSIONS MAY VAY ± 1/2" [12.7mm] 2014 7361-7461 IPS WASTE Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. 0002080056.D 09208A00 14 EO4010 14 3/4 [372] 11 [281] 3 1/2 [90] 3 1/2 [89] 6 [151] TOP VIEW 14 1/16 [356] 8 1/2 [216] AXION Wall-Mounted Eye/Face Wash with Stainless Steel Bowl 3 [76] 1 1/2 [36] L-STAINE 1-1/4 IPS 10 3/4 [272] ± 1 [25] WALL MOUNT DETAIL 4 1/4 [105] MAX. 45" [1143] MIN. 33" [838] 1/2 IPS 1-1/2 (F) IPS WASTE TAP (SUPPLIED W/7360BT & 7460BT ONLY) FLOO LINE WALL FAE 2014 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. EO5010 AXION Barrier-Free, Pull-Down Wall or Bench- Mounted, ABS Plastic Eye/Face Wash PAGE 1 of 2 2015 Haws orporation - All ights eserved. HAWS and other trademarks used in these materials are the exclusive property of Haws orporation. 4 Applicable Market ommercial Health Industrial Hospitality Scientific
AXION by GENTE EMEGENY EYE/FAE WASHES EO5020 AXION Wall-Mounted ABS Plastic Eye/Face Wash and Body Spray Head with 3.7m ecoil Hose and Trigger Spray EO5030 AXION Bench-Mounted ABS Plastic Eye/Face Wash and Body Spray Head with 2.4m Hose EO7620 AXION eyepod, a Faucet-Mounted, Stainless Steel Eyewash Applicable Market ommercial Health Industrial Hospitality Scientific 5
AXION by GENTE EMEGENY SHOWES EO2000 AXION Horizontal or Vertical-Mounted Drench Shower with Stainless Steel Showerhead * is supplied without Shower ose. Please contact if Shower ose is required. EO2010 AXION eiling-mounted Drench Shower with Pull od and Stainless Steel Showerhead * is supplied without Shower ose. Please contact if Shower ose is required. EO2020 AXION Floor-Mounted Stainless Steel Drench Shower 6 Applicable Market ommercial Health Industrial Hospitality Scientific
171 1/2" 69 3/8" 102 1/8" 53 1/2" 53 1/2" TANK VENT 445 GAL 91 3/4" 59 3/8" 43" AXION by GENTE TANK/GAVITY FED SHOWE & EYEWASH EO7500 Portable, Gravity-Operated Eyewash - 60.6L EO7501 Portable, Gravity-Operated Eyewash - 34.1L EO9082 Sterile Bacteriostatic Preservative For Use in Portable Eyewash Stations - 4 Pack. One 5oz. Bottle will preserve 18.9 to 75.7 liters for up to three months. EO6000 TANK LID (EMOVABLE) Fiberglass, Indoor Gravity-Fed ombination Unit with AXION Eye/Face Wash and Showerhead 1 15/16" A TANK: FIBEGLASS WITH INTENAL INSULATION AND WOODEN FAME X16 BOLT TANK TO FAME WITH SUPPLIED HADWAE WATE 1" HOSE 1 NPT SETION A-A A SALE 1 : 18 Applicable Market ommercial Health Industrial Hospitality Scientific 7
AXION by GENTE AESSOIES EO8000 lass 1, Division 2 Emergency Alarm System EO8000E Explosive Emergency Alarm System EO8010 Double-Pole Double-Throw Flow Switch EO8015 AXION Advantage Stainless Steel Eye/Face Wash and Shower Upgrade System EO8020 Freeze-Protection Bleed Valve EO8030 Scald Protection Bleed Valve EO8340 AXION Thermostatic Mixing Valve Providing Tepid Water to Emergency Showers and Eyewashes. Flow ate of 117.3 liters. EO8350 AXION Thermostatic Mixing Valve Providing Tepid Water to a Single Emergency Eye/Face Wash. Flow ate of 38.8 liters. 8 Applicable Market ommercial Health Industrial Hospitality Scientific