Moon Visions Lighting V & 120V LED Specification Resource Guide

Moon Visions Lighting www.moonvisionslighting.com 214.393.7407 12V & 120V LED Specification Resource Guide

Moon Visions Lighting was created by folks who are passionate about quality lighting. Since 2008, our bullets have been made right here in Texas with only the finest aluminum alloy and have an exceptional powder-coat finish guaranteed for five years in the harshest environmental conditions. The knuckle is placed more forward on the fixture for better balance, with 7.5 indexing angles for precise aiming. And even though they are made from the best 380 aluminum alloy, they are still the lightest weight bullet on the market making it even easier to mount in the highest of treetops. But what makes the Moon Visions family of bullets stand above the rest is their unique DuraLune Electrocoated finish. Our DuraLune Electrocoat is a molecularly bonded epoxy that is applied before their superior powder coat, making them the most durable bullet on the market. Our electrocoated bullets can withstand the most intense environmental conditions perfect when you have a 50,000 hour LED lamp inside! And speaking of LEDs...Moon Visions Lighting has teamed up with an American based LED company, with over 30 years of experience, to design and produce our own line of LED lamps. This partnership allowed us to design the exact LED lamp we wanted the color, the beam spread, the intensity, etc. - all customized for our unique outdoor lighting applications. And best of all, our LEDs are 120V or 12V depending on which application suits you best. For retrofitting a mercury vapor system or other line voltage system, use our 120V PARs; but for starting a new project, our 12V PARs are the easiest to install and maintain. The various beam spreads, wattages, and lenses available in our LED family make for endless lighting possibilities. In this newest specification catalog, you will find all the information needed for our entire line of Moon Visions bullets, including our 12V and 120V LED bullets, Feature Spots, Tube Shields, Stainless Transformers and more. We have added a new Architectural Light Bar Floodlight, made with our same LEDs but in a linear configuration. These sleek 12VAC floods are available in both warm white and cool white. See pages 2-3 for additional specifications. Please refer to our website for the most up-to-date information on our LEDs and current cut sheets. Please enjoy! Moon Visions Lighting www.moonvisionslighting.com 214.393.7407

NEW! Light Bar Series Table of Contents Mounting Options 12VAC 22W Light Bar Pages 2-3 Mounting Accessories Pages 22-23 Bullet Series LED Bullet Series Pages 4-13 Power Supplies Ballast Box Assemblies Pages 24-25 LED Feature Spots Pages 14-15 LV Transformers & Accessories Pages 26-27 120V Bullet Series Pages 16-17 Down/Up Tube Shields Pages 18-19 Lamp Options BR40-BR30-BR20 Lamp Options Pages 28-30 Designing with LEDs 31 Installation Guide 32-33 Project Name: Catalog Part Number: MR16 & PAR36 12V Series Pages 20-21 Moon Visions LEDs Page 34 DuraLune Electrocoating Pages 36-37 Why Moon Visions LEDs? 34 DuraLune Electrocoating 36 Finish Options 38 Frequently Asked Questions 40 Terms & Conditions 41 Fixture Type: Limited Warranty 41

New! 12VAC 22W LIGHT BAR LB10-22W-12V 10.375 3.5 4 UL Listed under UL Standard 1598 Certified to CSA Standard 10 length Available in 5000K or 3500K 120 optics 1668 lumens in 5000K IP66 Wet Location Rated for 50,000 hours Custom mounting hardware included Standard finish BLK only Limited 5 year warranty 12VAC required Not dimmable 2 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Light Bar Ordering Guide Fixture Series Wattage Voltage Color Temp. Mount LB10 22W 12V 3500K TM 5000K TMB LGS Mounting Accessories: See also pages 24-25 Example: LB10-22W-12V-3500K-LGS Tree Mount Tree Mount Box LGS Electrical Specifications Watts/Ft Fixture Wattage System Wattage Max Load per Run 25.2W 21W 18.9W 96W (85% -90%) *tested at 5000K with 120 lens Total Lumen Lumen/ ft Lumen/ Watt CRI 1668 lm 2002 lm/ft 66.2 lm/w 83 12VAC Transformer Required. See page 26 for options. MVX 50W or 100W MVX-HW Hardwire Transformers Project Name: Catalog Part Number: Fixture Type: 3

Moon Visions R38 22W LED Bullet Series Housing (BR40): 380 Aluminum alloy die cast. Downshields: Required for use as a downlight. (DSA10): Fabricated steel material, angle-cut 10 in length. (DST10): Fabricated steel material, straight tube shield 5.75 in length. See also page 18. Upshields: Required for use as an uplight. Die cast aluminum with heat resistant crystal tempered convex glass lens. Sealed with 50 year-life silicone solution and high temperature silicone sponge gaskets. Positive stainless screw mount attachment. NOTE: Fixture must be mounted at less than 90 (USR40): Angled upshield 3.9 tall. (UST40): Straight Tube upshield 5 tall with debris guard. See also page 19. Sockets & Electrical Assembly: 12V Bullet = Unique 12V GU24 Twist-Lock base allows for maximum pin contact as well as locked socket to insure lamp security. GU24 Base is known for high vibration tolerances (a must for fixtures mounted high in trees) and high heat tolerances. Low voltage (12V) system requires magnetic or electronic transformer, sold separately. 120V Bullet = Leviton 4KV Pulse rated 600V porcelain lampholders. Direct lamp replacement design; no separate driver needed. Knuckles: Forward placement for better balance. Adjustable in 7.5 increments for precise aiming. 1/2 NPSM threaded arm with stainless hardware. Knuckles are filled with silicone for maximum protection from elements. Finish: Super polyester Duracoat TM powder coat with 5 year warranty. South Florida exposure rating for 5 years. Powder coated inside and outside with additional DuraLune Electrocoating application underneath. Standard textured finishes are Hartford Green (HGT) and Bronze (BZT). Other finishes available on page 38. See also Moon Visions Difference on page 36. Mounting Accessories: See also pages 22-23. LED Lamp: 18 Low heat-emitting LEDs with no UV light radiation, paired with excellent heat sinks, provides a 50,000 hr. expected lamp life and 3 year warranty. Solid state LED direct lamp replacement technology. LED Lamp is not dimmable. PAR38 light engine contains built-in fan for maximum heat dissipation. Available in 25 (NFL) and 40 (FL) beam spreads in Cool White, and 40 (FL) in Warm White. Patent-pending rubber stabilizer included. Lumens: 1900 (5K); 1700 (3.5K) LED Lamp Accessories: Overall Spread Lens doubles beam spread of lamp. Diffused Lens sandblasted glass softens and spreads light. Mercury Vapor Lens corrects color temperature to 5500K. Tree Mount Tree Mount Box LGS 4 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Moon Visions R38 22W LED Bullet Series Ordering Guide Fixture and LED Lamp Ordered Separately Fixture Series Voltage Shield Mount* Color Fixture: BR40 12V DSA10 TM HGT 120V DST10 TMB BZT USR40 LGS UST40 BR40 12V DSA10 TM BZT Example: BR40-12V-DSA10-TM-BZT = 12V R40 Bronze Downlight LED Lamp Series Voltage Size Wattage Color and Beam Spread Spread Lens 5500K Lens LED Lamp: LED MV 12V R38 22W 3500K 40 FL OSL MV 120V 5000K 25 NFL DIF 5000K 40 FL LEDMV 12V R38 22W 5000K 40 MV Example: LED MV12V R38 22W 5000K 40 FL MV = 22W 12V LED PAR38 FL with MV lens GU24 12V Lamp BR40 with DSA10 Downshield BR40 with USR40 Upshield E26 120V Lamp Project Name: Catalog Part Number: Fixture Type: 5

Moon Visions R30 14W LED Bullet Series Housing (BR30): 380 Aluminum alloy die cast. Downshields: Required for use as a downlight. (DSA8): Fabricated steel material, angle-cut 8 in length. (DST8): Fabricated steel material, straight tube shield 4.5 in length. See also page 18. Upshields: Required for use as an uplight. Die cast aluminum with heat resistant crystal tempered convex glass lens. Sealed with 50 year-life silicone solution and high temperature silicone sponge gaskets. Positive stainless screw mount attachment. NOTE: Fixture must be mounted at less than 90 (USR30): Angled upshield 3.5 tall. (UST30): Straight Tube upshield 4 tall with debris guard. See also page 19. Sockets & Electrical Assembly: 12V Bullet = Unique 12V GU24 Twist-Lock base allows for maximum pin contact as well as locked socket to insure lamp security. GU24 Base is known for high vibration tolerances (a must for fixtures mounted high in trees) and high heat tolerances. Low voltage (12V) system requires magnetic or electronic transformer, sold separately. 120V Bullet = Leviton 4KV Pulse rated 600V porcelain lampholders. Direct lamp replacement design; no separate driver needed. Knuckles: Forward placement for better balance. Adjustable in 7.5 increments for precise aiming. 1/2 NPSM threaded arm with stainless hardware. Knuckles are filled with silicone for maximum protection from elements. Finish: Super polyester Duracoat TM powder coat with 5 year warranty. South Florida exposure rating for 5 years. Powder coated inside and outside with additional DuraLune Electrocoating application underneath. Standard textured finishes are Hartford Green (HGT) and Bronze (BZT). Other finishes available on page 38. See also Moon Visions Difference on page 36. Mounting Accessories: See also pages 22-23. LED Lamp: 12 Low heat-emitting LEDs with no UV light radiation, paired with excellent heat sinks, provides a 50,000 hr. expected lamp life and 3 year warranty. Solid state LED direct lamp replacement technology. LED Lamp is not dimmable. PAR3012 light engine contains built-in fan for maximum heat dissipation. Available in 25 (NFL) and 40 (FL) beam spreads in Cool White, and 15 (SP) and 40 (FL) in Warm White. Lumens: 1400 (5K); 1300 (3.5K) LED Lamp Accessories: Overall Spread Lens doubles beam spread of lamp. Diffused Lens sandblasted glass softens and spreads light. Mercury Vapor Lens corrects color temperature to 5500K. Tree Mount Tree Mount Box LGS 6 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Moon Visions R30 14W LED Bullet Series Ordering Guide Fixture: Fixture and LED Lamp Ordered Separately Fixture Series Voltage Shield Mount* Color BR30 12V DSA8 TM HGT 120V DST8 TMB BZT USR30 LGS UST30 BR30 120V USR30 BZT Example: BR30-120V-USR30-BZT = 120V R30 Bronze Uplight LED Lamp: LED Lamp Series Voltage Size Wattage Color and Beam Spread Spread Lens 5500K Lens LED MV 12V R30 14W 3500K 15 SP OSL MV 120V 3500K 40 FL DIF 5000K 25 NFL 5000K 40 FL LEDMV 120V R30 14W 3500K 40 OSL Example: LED MV120V R30 14W 3500K 40 FL OSL = 14W 120V LED PAR30 FL with Spread lens BR30 with DSA8 Downshield GU24 12V Lamp BR30 with USR30 Upshield E26 120V Lamp Project Name: Catalog Part Number: Fixture Type: 7

Moon Visions R30 7W LED Bullet Series Housing (BR30): 380 Aluminum alloy die cast. Downshields: Required for use as a downlight. (DSA8): Fabricated steel material, angle-cut 8 in length. (DST8): Fabricated steel material, straight tube shield 4.5 in length. See also page 18. Upshields: Required for use as an uplight. Die cast aluminum with heat resistant crystal tempered convex glass lens. Sealed with 50 year-life silicone solution and high temperature silicone sponge gaskets. Positive stainless screw mount attachment. NOTE: Fixture must be mounted at less than 90 (USR30): Angled upshield 3.5 tall. (UST30): Straight Tube upshield 4 tall with debris guard. See also page 19. Sockets & Electrical Assembly: 12V Bullet = Unique 12V GU24 Twist-Lock base allows for maximum pin contact as well as locked socket to insure lamp security. GU24 Base is known for high vibration tolerances (a must for fixtures mounted high in trees) and high heat tolerances. Low voltage (12V) system requires magnetic or electronic transformer, sold separately. 120V Bullet = Leviton 4KV Pulse rated 600V porcelain lampholders. Direct lamp replacement design; no separate driver needed. Knuckles: Forward placement for better balance. Adjustable in 7.5 increments for precise aiming. 1/2 NPSM threaded arm with stainless hardware. Knuckles are filled with silicone for maximum protection from the elements. Finish: Super polyester Duracoat TM powder coat with 5 year warranty. South Florida exposure rating for 5 years. Powder coated inside and outside with additional DuraLune Electrocoating application underneath. Standard textured finishes are Hartford Green (HGT) and Bronze (BZT). Other finishes available on page 38. See also Moon Visions Difference on page 36. LED Lamp: 6 Low heat-emitting LEDs with no UV light radiation, paired with excellent heat sinks, provides a 50,000 hr. expected lamp life and 3 year warranty. Solid state LED direct lamp replacement technology. LED Lamp is not dimmable. Available in 25 (NFL) and 40 (FL) beam spreads in Cool White, and 40 (FL) in Warm White. Lumens: 655 (5K); 600 (3.5K) LED Lamp Accessories: Overall Spread Lens doubles beam spread of lamp. Diffused Lens sandblasted glass softens and spreads light. Mercury Vapor Lens corrects color temperature to 5500K. Mounting Accessories: See also pages 22-23. Tree Mount Tree Mount Box MGS (12V) LGS (120V) 8 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Moon Visions R30 7W LED Bullet Series Ordering Guide Fixture and LED Lamp Ordered Separately Fixture: Fixture Series Voltage Shield Mount* Color BR30 12V DSA8 TM HGT 120V DST8 TMB BZT USR30 MGS (12V) UST30 LGS (120V) BR30 120V USR30 BZT Example: BR30-120V-USR30-BZT = 120V R30 Bronze Uplight LED Lamp Series Voltage Size Wattage Color and Beam Spread Spread Lens 5500K Lens LED Lamp: LED MV 12V R30 7W 3500K 40 FL OSL MV 120V 5000K 25 NFL DIF 5000K 40 FL LEDMV 120V R30 7W 3500K 40 OSL Example: LED MV120V R30 7W 3500K 40 FL OSL = 7W 120V LED PAR30 FL with Spread lens GU24 12V Lamp BR30 with DSA8 Downshield E26 120V Lamp BR30 with USR30 Upshield Project Name: Catalog Part Number: Fixture Type: 9

Moon Visions R20 5W LED Bullet Series Housing (BR20): 380 Aluminum alloy die cast. Downshields: Required for use as a downlight. (DSA6): Fabricated steel material, angle-cut 6 in length. (DST6): Fabricated steel material, straight tube shield 4 in length. See also page 18. Upshields: Required for use as an uplight. Die cast aluminum with heat resistant crystal tempered convex glass lens. Sealed with 50 year-life silicone solution and high temperature silicone sponge gaskets. Positive stainless screw mount attachment. NOTE: Fixture must be mounted at less than 90 (USR20): Angled upshield 3 tall. (UST20): Straight Tube upshield 3 tall with debris guard. See also page 19. Sockets & Electrical Assembly: 12V Bullet = Unique 12V GU24 Twist-Lock base allows for maximum pin contact as well as locked socket to insure lamp security. GU24 Base is known for high vibration tolerances (a must for fixtures mounted high in trees) and high heat tolerances. Low voltage (12V) system requires magnetic or electronic transformer, sold separately. 120V Bullet = Leviton 4KV Pulse rated 600V porcelain lampholders. Direct lamp replacement design; no separate driver needed. Knuckles: Forward placement for better balance. Adjustable in 7.5 increments for precise aiming. 1/2 NPSM threaded arm with stainless hardware. Knuckles are filled with silicone for maximum protection from the elements. Finish: Super polyester Duracoat TM powder coat with 5 year warranty. South Florida exposure rating for 5 years. Powder coated inside and outside with additional DuraLune Electrocoating application underneath. Standard textured finishes are Hartford Green (HGT) and Bronze (BZT). Other finishes available on page 38. See also Moon Visions Difference on page 36. LED Lamp: 4 Low heat-emitting LEDs with no UV light radiation, paired with excellent heat sinks, provides a 50,000 hr. expected lamp life and 3 year warranty. Solid state LED direct lamp replacement technology. LED Lamp is not dimmable. Available in 25 (NFL) and 40 (FL) beam spreads in Cool White, and 15 (SP) and 40 (FL) in Warm White. Lumens: 440 (5K); 388 (3.5K) LED Lamp Accessories: Overall Spread Lens doubles beam spread of lamp. Diffused Lens sandblasted glass softens and spreads light. Mercury Vapor Lens corrects color temperature to 5500K. Mounting Accessories: See also pages 22-23. Tree Mount Tree Mount Box SGS (12V) LGS (120V) 10 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Moon Visions R20 5W LED Bullet Series Ordering Guide Fixture and LED Lamp Ordered Separately Fixture: Fixture Series Voltage Shield Mount* Color BR20 12V DSA6 TM HGT 120V DST6 TMB BZT USR20 SGS (12V) UST20 LGS (120V) BR20 12V DSA6 TMB HGT Example: BR20-12V-DSA6-TMB-HGT = 12V R20 Green Downlight LED Lamp Series Voltage Size Wattage Color and Beam Spread Spread Lens 5500K Lens LED Lamp: LED MV 12V R20 5W 3500K 15 SP OSL MV 120V 3500K 40 FL DIF 5000K 25 NFL 5000K 40 FL LEDMV 12V R20 5W 5000K 40 OSL Example: LED MV12V R20 5W 5000K 40 FL OSL = 5W 12V LED PAR20 FL with Spread lens BR20 with GS6 Downshield GU24 12V Lamp BR20 with USR20 Upshield E26 120V Lamp Project Name: Catalog Part Number: Fixture Type: 11

Moon Visions R20 2.5W & 1.5W LED Bullet Series Housing (BR20): 380 Aluminum alloy die cast. Downshields: Required for use as a downlight. (DSA6): Fabricated steel material, angle-cut 6 in length. (DST6): Fabricated steel material, straight tube shield 4 in length. See also page 18. Upshields: Required for use as an uplight. Die cast aluminum with heat resistant crystal tempered convex glass lens. Sealed with 50 year-life silicon solution and high temperature silicone sponge gaskets. Positive stainless screw mount attachment. NOTE: Fixture must be mounted at less than 90 (USR20): Angled upshield 3 tall. (UST20): Straight Tube upshield 3 tall with debris guard. See also page 19. Sockets & Electrical Assembly: 12V Bullet = Unique 12V GU24 Twist-Lock base allows for maximum pin contact as well as locked socket to insure lamp security. GU24 Base is known for high vibration tolerances (a must for fixtures mounted high in trees) and high heat tolerances. Low voltage (12V) system requires magnetic or electronic transformer, sold separately. 120V Bullet = Leviton 4KV Pulse rated 600V porcelain lampholders. Direct lamp replacement design; no separate driver needed. Knuckle: Forward placement for better balance. Adjustable in 7.5 increments for precise aiming. 1/2 NPSM threaded arm with stainless hardware. Knuckles are filled with silicone for maximum protection from the elements. Finish: Super polyester Duracoat TM powder coat with 5 year warranty. South Florida exposure rating for 5 years. Powder coated inside and outside with additional DuraLune Electrocoating application underneath. Standard textured finishes are Hartford Green (HGT) and Bronze (BZT). Other finishes available on page 38. See also Moon Visions Difference on page 36. LED Lamp: 4 Low heat-emitting LEDs operating at.5 watts (.375 watts for 1.5W) each. No UV light radiation, paired with excellent heat sinks, provides a 50,000 hr. expected lamp life and 3 year warranty. Solid state LED direct lamp replacement technology. LED Lamp is not dimmable. Available in 40 (FL) beam spreads in Cool White and Warm White. Lumens: 220/110 (5K); 194/97 (3.5K) LED Lamp Accessories: Overall Spread Lens doubles beam spread of lamp. Diffused Lens sandblasted glass softens and spreads light. Mercury Vapor Lens corrects color temperature to 5500K. Mounting Accessories: See also pages 22-23. Tree Mount Tree Mount Box LGS (120V) SGS (12V) 12 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Moon Visions R20 2.5W & 1.5W LED Bullet Series Ordering Guide Fixture and LED Lamp Ordered Separately Fixture Series Voltage Shield Mount* Color Fixture: BR20 12V DSA6 TM HGT 120V DST6 TMB BZT USR20 SGS (12V) UST20 LGS (120V) BR20 12V DSA6 TMB HGT Example: BR20-12V-DSA6-TMB-HGT = 12V R20 Green Downlight LED Lamp Series Voltage Size Wattage Color and Beam Spread Spread Lens 5500K Lens LED Lamp: LED MV 12V R20 2.5W 3500K 40 FL OSL MV 120V 1.5W 5000K 40 FL DIF LEDMV 12V R20 2.5W 5000K 40 OSL Example: LED MV12V R20 2.5W 5000K 40 FL OSL = 2.5W 12V LED PAR20 FL with Spread lens BR20 with GS6 Downshield GU24 12V Lamp BR20 with USR20 Upshield E26 120V Lamp Project Name: Catalog Part Number: Fixture Type: 13

Moon Visions LED Feature Spot Bullets Highlight a statue, waterfall, flagpole or piece of art with a warm punch of light using our LED feature spot bullet. Available in a 15 beam spread, in our medium (BR30) or small (BR20) bullet fixture. Customize with your LED lamp preference: 12V or 120V; 5 watts or 14 watts. BR30-14W-LED-SPOT 14 watt R30 Medium Bullet BR30 bullet with 14 watt LED lamp 15 (SP) Beam Spread 3500K Warm White Available in 12 volts or 120 volts DSA8 (angled shield) or DST8 (tube shield) required for use as a downlight USR30 (angled upshield) or UST30 (tube upshield) required for use as an uplight Available in textured finishes Hartford Green (HGT) or Bronze (BZT) BR20-5W-LED-SPOT Lighting Designer: Dana Clarke Photography by: Frankie Sanchez Desert Springs, CA 5 watt R20 Small Bullet BR20 bullet with 5 watt LED lamp 15 (SP) Beam Spread 3500K Warm White Available in 12 volts or 120 volts DSA6 (angled shield) or DST6 (tube shield) required for use as a downlight USR20 (angled upshield) or UST20 (tube upshield) required for use as an uplight Available in textured finishes Hartford Green (HGT) or Bronze (BZT) 14 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Moon Visions LED Feature Spot Bullets Fixture Series Voltage Shield Mount* Color BR30 12V DSA8 TM HGT 120V DST8 TMB BZT USR30 LGS (120V) UST30 Fixture Series Voltage Shield Mount* Color BR20 12V DSA6 TM HGT 120V DST6 TMB BZT USR20 SGS (12V) UST20 LGS (120V) LED Lamp Series Voltage Size and Wattage Color and Beam Spread LED MV 12V R20 5W 3500K 15 SP 120V R30 14W Example: BR30-120V-UST30-LGS-BZT with LED MV120V R30 14W 3500K 15 SP *Mounting Accessories See also pages 22-23. Tree Mount Tree Mount Box SGS (12V) LGS (120V) Project Name: Catalog Part Number: Fixture Type: 15

Moon Visions Bullet Series Lamp Types: Mercury Vapor, Metal Halide, Fluorescent, LED, and Incandescent. Housing: 380 Aluminum alloy die cast. Downshield: Required for use as downlight. Fabricated steel material. Angle-cut (DSA) or straight tube (DST) shields. Downlights do not require lenses. Upshield: Required for use as an uplight. Die cast aluminum with heat resistant, crystal tempered convex glass lens. Sealed with 50 year-life silicone solution and high temperature silicone sponge gaskets. Positive stainless screw mount attachment. Angle-cut (USR) or straight tube (UST) available. Knuckle: Forward placement for better balance. Adjustable in 7.5 increments for precise aiming. 1/2 NPSM threaded arm. Knuckle may be threaded into Myer's Hubs, Tree Mounts, Surface Mounts, Ground Stakes, or Junction Boxes. Finish: Super polyester Duracoat TM powder coat with 5 year warranty. South Florida exposure rating for 5 years. Powder coated inside and outside with DuraLune Electrocoating application underneath. Standard finishes are Hartford Green (HGT) and Bronze (BZT). Socket: Leviton 4KV Pulse rated 600V porcelain lampholders with 25% more lamp contact area than Chinese sockets. Optics: BR40 available with Flood (FL) or Spot (SP) optics for use with MV or MH E17 shaped lamps and spiral fluorescents. BR40 Series BR30 Series BR20 Series 16 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Moon Visions Bullet Series Ordering Guide Bullet Series Optics Finish Shields & Accessories BR40 R40 Reflector Lamps MV-175W R40 Max MV-100W R40 Max R38 PAR Lamps LED-22W PAR38 Max INC-250W PAR38 Max Fluor-23W PAR38 Max FL Flood Reflector-65 MV-175W E17 Max MH-175W E17 Max SP Spot Reflector-39 MV-175W E17 Max MH-175W E17 Max -HGT Hartford Green Texture -BZT Bronze Texture DSA10-10 Angled Downshield DST10-5.75 Straight Tube Downshield USR40-4 Cast Angled Upshield UST40-5 Tube Upshield with debris guard TM-Tree Mount with mounting hardware TMB-Tree Mount Box with mounting hardware LGS-Large Ground Stake for Uplighting only INL-Internal Hexcell Louver BR30 R30 Reflector Lamps MV-100W R30 Max R30 PAR Lamps LED-14W PAR30 Max MH-70W PAR30 Max INC-75W PAR30 Max Fluor-15W PAR30 Max -HGT Hartford Green Texture -BZT Bronze Texture DSA8-8 Angled Downshield DST8-4.5 Straight Tube Downshield USR30-3.5 Cast Angled Upshield UST30-4 Tube Upshield with debris guard TM-Tree Mount with mounting hardware TMB-Tree Mount Box with mounting hardware LGS-Large Ground Stake for Uplighting only INL-Internal Hexcell Louver BR20 R20 Reflector Lamps MV-50W R20 Max R20 PAR Lamps LED 5W, 2.5W, 1.5W MH-35W PAR20 Max INC-50W PAR20 Max Fluor-11W PAR20 Max -HGT Hartford Green Texture -BZT Bronze Texture DSA6-6 Angled Downshield DST6-4 Straight Tube Downshield USR20-3 Cast Angled Upshield UST20-3 Tube Upshield with debris guard TM-Tree Mount with mounting hardware TMB-Tree Mount Box with mounting hardware LGS-Large Ground Stake for Uplighting only INL-Internal Hexcell Louver Ballast: Required for Mercury Vapor and Metal Halide lamps. Universal Lighting Technologies ballast housed in 6 x7 x4 steel box (for single ballast setups) or a 6 x12 x4 steel box (for double ballast setups). Ballast box is powder coated the same color as the fixture with the same 5 year warranty. Each MV or MH lamp requires one ballast. Wattage of the ballast must match the wattage of the lamp used. Ballast Wattage Lamp Voltage Finish Hub Mount RB (Remote Box) 175 100 70 50 35 MH, MV MH, MV MH MT (120, 208, 240, 277V) HGT BZT H Tree Mount Tree Mount Box LGS RB Single RB w/ Hub 2RB Double Project Name: Catalog Part Number: Fixture Type: 17

Tube Light Downshields Available in all three sizes: BR40, BR30 and BR20 for both 12V or 120V bullet setups Full straight shield constructed of fabricated steel material Allows for minimal glare in all directions Excellent for use as a FEATURE SPOT Available in textured finishes Hartford Green (HGT) or Bronze (BZT) BR40 with DST10 Downshield BR30 with DST8 Downshield BR20 with DST6 Downshield 18 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Tube Light Upshields Available in all three sizes: BR40 BR30 and BR20 in both 12V or 120V bullet setups Full straight upshield allows for minimal glare in all directions 1/2 gap around cast shield eliminates water and debris build up Fixture remains completely sealed Available in textured finishes Hartford Green (HGT) or Bronze (BZT) BR40 with UST40 Upshield BR30 with UST30 Upshield BR20 with UST20 Upshield Project Name: Catalog Part Number: Fixture Type: 19

BR20-MR16 Bullet BR20 bullet has 12V MR16 socket with lamp clip assembly installed Rated for up to 75 watt 12V MR16 lamp USR20 (angled shield) or UST20 (tube shield) required for use as an uplight DSA6 (angled shield) or DST6 (tube shield) required for use as a downlight Remote transformer required Available in textured finishes Hartford Green (HGT) or Bronze (BZT) For use with 10W, 20W, 35W, 50W, or 75W MR16 12V lamps. Also compatible with any LED MR16 replaceable lamp. Optional Mounting Accessories: SGS 12V Mounting Stake TM Tree Mount TMB Tree Mount Box *Optional MR16 Lenses: PBL Pale Blue Lens PGL MV Green Lens OSL Spread Lens DIF Diffused Lens LSL Linear Spread Lens LVR Honeycomb Louver *All MR16 lenses require lens clip to attach to lamp 20 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

BR30-PAR36 Feature Spot Bullet BR30 bullet with built-in 75 watt 12 volt electronic transformer Rated for up to 50 watts Available as downlight only DSA8 (angled shield) or DST8 (tube shield) required for use as a downlight Available in textured finishes Hartford Green (HGT) or Bronze (BZT) For use with these lamps: 50W/AR111/SSP 4 Super Spot 50W/AR111/SP 8 Spot 20W, 35W, or 50W PAR36 Narrow Spot or Very Narrow Spot Sealed Beam Optional Accessories: TM or TMB Tree Mount R30-INL Internal Louver to reduce side-to-side glare Project Name: Catalog Part Number: Fixture Type: 21

TM Tree Mount Mounting Accessories All mounting hardware included: (2) 4 Stainless Tree Bolts with (4) 1/4 x 20 nuts (1) Galvanized back plate (2) Back plate mounting screws (1) Knuckle mounting stainless screw Comes standard with all downlight kits unless specified Available in textured finishes Hartford Green (HGT) or Bronze (BZT) TMB Tree Mount Box All mounting hardware included: (2) 4 Stainless Tree Bolts with (4) 1/4 x 20 nuts (1) Galvanized back plate (2) Back plate mounting screws (1) Knuckle mounting stainless screw Larger box with Neoprene Gasket 1/2-14 NPT inlet thread for cord grip/seal tite attachment For low voltage applications, use TMB box to house RS12 LED transformer Available in textured Bronze (BZT) finish standard; longer lead time for other finishes (see page 38) 22 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Small Ground Stake (SGS-12V) Stake Mounting Accessories Two-piece low voltage mounting stake PVC stake 1 3/8 O.D. x 9 1/2 long Integral 1/2 NSP fitter Includes ABS removable 1/2 NPS cap with screws Recommended for use with BR20 12 volt series Medium Ground Stake (MGS-12V) Two-piece low voltage mounting stake PVC stake 1 3/8 O.D. x 15 long Integral 1/2 NSP fitter Includes ABS removable 1/2 NPS cap with screws Recommended for use with BR30 7 watt 12 volt series Large Ground Stake (LGS-120V) Suitable for Wet Locations Heavy wall, impact resistant PVC Die Cast Aluminum Cap Electrocoated & powder coated in BLK black finish Threaded 1/2 NPT hub Slanted bottom accepts conduits of different depths 3 O.D. x 19 H Required for all BR series in 120 volt, and recommended for BR30 14 watt and BR40 22 watt series in 12 volts Project Name: Catalog Part Number: Fixture Type: 23

Single Remote Ballast Box (RB) Ballast Box Assemblies 35W, 50W, 70W, 100W, 150W or 175W Metal Halide Made of EG (electro-magnetic) metal that will not rust Powder coating has 5 year warranty Mounting ears made of nickel plated steel Available in textured finishes Hartford Green (HGT) and Bronze (BZT) Side view Front view Ballast Box Hub Mount 1/2 Myers Hub mounted on door of single ballast box For use in mounting bullet directly to ballast box Hub painted same finish as box color Mounting ears made of nickel plated steel Powder coating on box has 5 year warranty Available in textured finishes Hartford Green (HGT) or Bronze (BZT) Add (-H) to order for hub mount 1/2 Zinc Myers Hub Side view Front view 24 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Double Remote Ballast Box (2RB) Ballast Box Assemblies 2x35W, 2x50W, 2x70W, 2x100W, 2x150W or 2x175W Metal Halide Made of EG (electro-magnetic) metal that will not rust Powder coating has 5 year warranty Makes for cleaner installation one box for two lights Mounting ears made of nickel plated steel Available in textured finishes Hartford Green (HGT) and Bronze (BZT) Side view Front view Project Name: Catalog Part Number: Fixture Type: 25

Low Voltage Transformers MVX 50/100-SS 100W Transformer with Cord & Plug UL 5085-2 & cul Recognized components 50 and 100 Watt output model 304 Stainless Steel enclosure with No. 4 brushed finish Removable door slides on and off for ease of entry Above grade, NEMA 3R rated, rain tight enclosure: 10.75 x 5 x 4 Timer Ready standard (for plug in timers see below) Mounting plate and hardware included Transformer Coils: High Efficiency, Flame Retardant, UL 94V0 Rating, 2.4VA Power Rating 120v primary, 12v secondary 50/60 Hertz/cycle (standard) 6 foot 18/3 SJT-WA weatherproof grounded power cord (120v) Extra heavy duty (80 amp) terminal lugs Manually resettable circuit breaker for overload and short circuit protection TN111RM Timer Plug-in analog timer sold separately. Outdoor rated with 2 on-off settings per day. Hardwire Transformers: MVX-HW-50 SS MVX-HW-100 SS MVX-HW-150 SS MVX-HW-200 SS UL 5085-2 & cul Recognized components 50,100, 150 & 200 Watt output models 304 Stainless Steel enclosure with No. 4 brushed finish Removable door slides on and off for ease of entry Above grade, NEMA 3R rated, rain tight enclosure: 5 x 7 3.25 Mounting plate and hardware included Transformer Coils: High Efficiency, Flame Retardant, UL 94V0 Rating, 2.4VA Power Rating 120v primary, 12v secondary 50/60 Hertz/cycle (standard) Supplied with two 1/2" conduit (trade size) holes & one 1-1/2" inlet with plugs in bottom panel, plus 2 side panel 1/2" conduit (trade size) holes with plugs 26 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Low Voltage Transformers & Accessories RS12-LED 30/60W Electronic Transformer FPC 120V Side Mount Photocell UPC 120V Upright Photocell Buck Boost 120/12V Transformers 100, 150, 250, 500 & 750W OTC 120V Outdoor Time Clock 250 Wire Spools 10-2 12V, 12-2 12V or 16-3 120V INL Louver for BR Series PBL Pale Blue Lens PGL Pale Green Lens DIF Diffused Lens MR16 Lens Clip *Required for all lenses OSL Overall Spread LVR Hexcell Louver LSL Linear Spread Project Name: Catalog Part Number: Fixture Type: 27

BR40 Lamp Options Mercury Vapor Lamps for use with Metal Halide Ballasts HR175R40 175W R40 MV (5700K) HR100R40 100W R40 MV (5700K) H175/E17 175W E17 MV (5700K) - use with FL/SP optics H100/E17 100W E17 MV (5700K) - use with FL/SP optics Metal Halide Lamps MH175/U/MED 175W E17 MH use with FL/SP optics MH100/U/MED 100W E17 MH use with FL/SP optics MH70/U/MED 70W E17 MH use with FL/SP optics MH50/U/MED 50W E17 MH use with FL/SP optics LED Lamps LED MV R38 22W 5K 22W R38 Cool White (5000K) 18 LEDs at 1.22 watts each 1900 Lumens Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 Years in a Moon Visions fixture only Available in 25 (NFL) and 40 (FL) beam spreads LED MV R38 22W 3.5K 22W R38 Warm White (3500K) 18 LEDs at 1.22 watts each 1700 Lumens Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 Years in a Moon Visions fixture only Available in 40 (FL) beam spread Halogen Lamps 70PAR38/FL/H 70W (replaces 90 watt PAR38) 120V Halogen 30 Flood 70PAR38/SP/H 70W (replaces 90 watt PAR38) 120V Halogen 10 Spot Fluorescent Lamps CFL 30W 6500K Spiral Use with flood reflector for best results Cool White CFL 30W 2700K Spiral Use with flood reflector for best results Warm White 23W PAR38 5000K Equivalent to 75 watt halogen Cool White 23W PAR38 2700K Equivalent to 75 watt halogen Warm White 28 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

BR30 Lamp Options Mercury Vapor Lamps for use with Metal Halide Ballasts HR100/R30 100W R30 MV (5700K) HR75/R30 75W R30 MV (5700K) HR50/R30 50W R30 MV (5700K) Metal Halide Lamps 70MHPAR30L/FL 70W MH PAR30 Long-neck, 30 Flood 70MHPAR30L/SP 70W MH PAR30 Long-neck, 10 Spot LED Lamps LED MV R30 14W 5K 14W R30 Cool White (5000K) 12 LEDs at 1.22 watts each / Lumens: 1400 Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 years in a Moon Visions fixture only Available in 25 (NFL) and 40 (FL) beam spreads LED MV R30 14W 3.5K 14W R30 Warm White (3500K) 12 LEDs at 1.22 watts each / Lumens: 1300 Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 years in a Moon Visions fixture only Available in 15 (SP) and 40 (FL) beam spreads LED MV R30 7W 5K 7W R30 Cool White (5000K) 6 LEDs at 1.22 watts each / Lumens:655 Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 years in a Moon Visions fixture only Available in 25 (NFL) and 40 (FL) beam spreads LED MV R30 7W 3.5K 7W R30 Warm White (3500K) 6 LEDs at 1.22 watts each / Lumens: 600 Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 years in a Moon Visions fixture only Available in 40 (FL) beam spread Halogen Lamps 60PAR30/LN/NFL/H 60W (replaces 75 watt PAR30) 120V Halogen 25 Narrow Flood 60PAR30/LN/NSP/H 60W (replaces 75 watt PAR30) 120V Halogen 9 Narrow Spot Fluorescent Lamps CFL 16W R30 6500K Equivalent to 50 watt halogen Cool White CFL 16W R30 2700K Equivalent to 50 watt halogen Warm White 15W PAR30 5000K Equivalent to 50 watt halogen Cool White 15W PAR30 2700K Equivalent to 50 watt halogen Warm White Project Name: Catalog Part Number: Fixture Type: 29

BR20 Lamp Options Mercury Vapor Lamps for use with Metal Halide Ballasts HR50/R20 50W R20 MV (5700K) Metal Halide Lamps 35MHPAR20/FL 35W PAR20 MH 30 Flood 35MHPAR20/SP 35W PAR20 MH 10 Spot LED Lamps LED MV R20 5W 5000K/3500K 5W R20 LED 4 LEDs at 1.22 watts each / Lumens: 440 (5K); 388 (3.5K) 3500K (warm white) or 5000K (cool white) Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 years in a Moon Visions fixture only Available in 25 (NFL) and 40 (FL) beam spreads LED MV R20 2.5W 5000K/3500K 2.5W R20 LED 4 LEDs at.5 watts each / Lumens: 220 (5K); 194 (3.5K) 3500K (warm white) or 5000K (cool white) Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 years in a Moon Visions fixture only Available in 40 (FL) beam spread LED MV R20 1.5W 5000K/3500K 1.5W R20 LED 4 LEDs at.375 watts each / Lumens: 110 (5K); 97 (3.5K) 3500K (warm white) or 5000K (cool white) Available as 12V or 120V (remote transformer required for 12V applications) Rated Life = 50,000 hours Warranty = 3 years in a Moon Visions fixture only Available in 40 (FL) beam spread Halogen Lamps 39PAR20/NFL/H 39 watt (replaces 50 watt PAR20 ) 120 V Halogen 30 Narrow Flood 39PAR20/NSP/H 39 watt (replaces 50 watt PAR20) 120V Halogen 10 Narrow Spot Fluorescent Lamps 11W PAR20 5000K Equivalent to 50 watt halogen Cool White 11W PAR20 2700K Equivalent to 50 watt halogen Warm White CFL 14W R20 6500K Spiral Equivalent to 50 watt halogen Cool White CFL 14W R20 2700K Spiral Equivalent to 50 watt halogen Warm White 30 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

LED Lights and Kelvin Temperatures Designing with LED Lights Color temperature is a measurement in degrees Kelvin that indicates the hue of a specific type of light source. So, why do we measure the hue of the light as a "temperature"? This was started in the late 1800s, when the British physicist William Kelvin heated a block of carbon. He noticed that as it glowed in the heat, the carbon produced a range of different colors at different temperatures. The black cube first produced a dim red light, increasing to a brighter yellow as the temperature went up, and eventually produced a bright blue-white glow at the highest temperatures. In his honor, Color Temperatures are measured in degrees Kelvin, which are a variation on Centigrade degrees. Notice in the Kelvin temperature light chart above that there is no green color shown. The greenish hues of mercury vapor lighting is what makes it so unique and beautiful, enhancing the foliage and giving true moonlight effects. To simulate this green color that is most like moonlight, we have fabricated a mercury vapor green lens that can be added to any of our 5000K LEDs. This lens addition increases the LED color to 5500K and closely resembles mercury vapor. LED Lights: Warm White vs. Cool White Typically Cool White (5000K) LEDs are used to illuminate the landscape in trees, bushes, etc. The eye is used to seeing the cool moonlight hues coming through the trees at night, creating a very natural and serene setting. Cool White light enhances the color of foliage, making trees and vegetation look even more green and healthy. Use Warm White (3500K) LEDs to light the house, fence, or other structures such as gazebos, arbors, or fountains. Warm White light brings out the texture of a surface and creates crisp and inviting light in seating or dining areas. In this Tennessee landscape, lighting designer Bill Taylor used 22W 12V 5K downlights in the trees and 5W 3500K 12V uplights across the front of the house and on the ornamental trees. Photography by Frederick Toma. Project Name: Catalog Part Number: Fixture Type: 31

120V Mercury Vapor Installation 1 minimum gap TM or TMB stands off from the tree, allowing room for growth. 4 Stainless bolts will not damage the tree. 120V LED Installation Above Grade Remote Ballast Box mounted within 25 of fixture. Use 4 stainless tree bolts to stand ballast box off at least 1 from the tree, allowing for growth. Water-tight cord grip Conduit 8 above grade Conduit 8 above grade LGS-120V Stake Flexible conduit by others Always refer to local, state and national code requirements before installation. 32 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

12V LED Installation Galvanized back plate 1 minimum gap 4 Stainless bolts with (2) zinc 1/4-20 nuts each TM or TMB stands off from the tree, allowing room for growth. 4 Stainless bolts will not damage the tree. MVX-HW-100W SS. Direct burial 12V wire Wire connections made inside LGS stake mount for the cleanest installation. No conduit necessary for 12 volt lighting. Always refer to local, state and national code requirements before installation. Project Name: www.moonvisionslighting.com Fixture Type: ph: 214.393.7407 fax: 214.635.3502 Catalog Part Number: 33

Why Moon Visions LEDs? Moon Visions LEDs get an A+ report card in their quality, construction, and design. Only the top 2% of Nichia chips are selected for our lamps. They operate at 1.22 watts each, have an average forward voltage of 3.5 volts +/-.1 volt, have a color temperature that is +/- 200K, and use 375 milliamps...exactly as LEDs are designed to operate. LEDs only require 3.5 volts to operate, yet most LED PAR lamps are 120 volts. The conversion of 120 volts down to 3.5 volts generates most of the heat associated with LEDs. By operating at 12 volts, the heat is reduced by a significant percentage, the lamp life is longer, and the light reduction over time is virtually eliminated. Now throw wattage into the equation: LEDs are designed to operate at 1.22 watts each. Many companies have only 3-5 LEDs in their PAR lamps, yet are rated anywhere from 15 to 20 watts. That means the current in each LED is being driven way up to run at 3-5 watts each, instead of the 1.22 watts in which they are designed. Again, this is way too hot and causes premature lamp life and output reduction. Moon Vision s PAR38 LED is 22 watts and has 18 LEDs in the lamp running at 1.22 watts each. Couple this with the fact that it can run on 12V AC, and we have one truly long-lasting LED lamp! Moon Visions LEDs are available in Cool White (5000K), simulated Mercury Vapor (5500K) with our optional green lens, and Warm White (3500K). The cool white temperatures are best to simulate moonlight (as a comparison, mercury vapor light is 5700K) and warm white temperatures to simulate halogen light. Because our binning process is so tight, you can be sure that our lamps are consistent from batch to batch. In other words, a PAR30 next to a PAR38 will not be two different colors! PAR38 Stabilizers & Heat Fans To keep our PAR38 LEDs from jiggling around in the fixtures, we ve developed a rubber stabilizer to hold them in place. When mounted way up in the trees, the wind and storms can sway the fixtures high up on the top branches. This rubber donut keeps the LED in place and secure within the fixture. The R30 and R20 LEDs are designed to fit snug within their housings, so they do not require a stabilizer. These stabilizers come standard in both 12V and 120V PAR38 LEDs. Another unique feature of Moon Visions LEDs are the built-in fans in the light engines. These 50,000 hour fans dissipate the heat, and draw it away from the diodes. When there is power to the light, the fan is activated and cools the engine. The long-life fans are in the engines of both the 14W and 22W LEDs. 34 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

A Preston Hollow residence in Dallas, TX features Moon Visions 14W 5000K LEDs to illuminate this majestic focal point of the garden. Lighting Designer: Greg Mavor Photography by: Jason Voinov www.moonvisionslighting.com Project Name: Fixture ph: 214.393.7407 Type: fax: 214.635.3502 Catalog Part Number: 35

The Moon Visions Difference: DuraLune Electrocoating Why have a 50,000 hour LED lamp if the fixture will look like this in two years? An LED lamp rated at 50,000 hours, operating 8 hours a day, has a hypothetical 17 YEAR life. You need a fixture that has this same 17 year life. Moon Visions Lighting takes a special step in production to have an exclusively protected DuraLune Electrocoating applied before the powder coat finish. Electrocoating is a process in which an epoxy paint becomes molecularly bonded to the fixtures and essentially becomes part of the fixture itself. It provides total protection inside and out because every crevice, hole, thread and recess is covered. Knuckle threads and fixture edges are a common place for corrosion to begin on powder-coated surfaces. This is eliminated with our DuraLune Electrocoating! Typically if a fixture is chipped or scratched in the field, over time corrosion will begin at the damaged area and infect the rest of the fixture from there. With a DuraLune Electrocoated bullet, the corrosion stops at that spot and does not damage the rest of the bullet. We are the only manufacturer that provides this extensive corrosion protection. Cast aluminum is a preferred material to work with in outdoor lighting. It is lightweight, cost effective and an impressive dissipater for heat. By electrocoating our fixtures, we ensure that our fixtures will last as long as any brass or copper fixture but much lighter in weight and cost! Other items that are electrocoated: manhole covers mercury marine outdrives the undercarriage of automobiles military trucks it is a perfect fit for outdoor lighting! Moon Visions bullets shown with the DuraLune Electrocoating applied. Notice even the threads are protected. And as a bonus...our DuraLune Electrocoating process is 100% eco- friendly! Coating waste is minimal, as virtually all of the coating put in the tank goes on the product and stays on the product. Low solvents and water-borne formulations make electrocoating a GREEN solution! 36 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Moon Visions DuraLune Electrocoating Process Our Trademarked painting method which uses an electrical current to deposit paint. How it works A DC charge is applied to the bullets immersed in a bath of oppositely charged paint particles. Epoxy paint particles are drawn to the bullet and are molecularly bonded to the aluminum bullet molecules. Amount of coating thickness applied is controlled by the electrical charge applied within a tolerance of +/-.0001 inches. Provides total protection because every crevice, hole and recess is covered - a process known as Throwing Power. Bullets and upshields are coated with an even, continuous film both inside and out - with no gaps, drips, pools, etc. Wear resistant, corrosion resistant, chemical resistant, & temperature resistant. Withstands rigorous salt spray, adhesion, dielectric and acid resistance tests. Accelerated Life Test performed by the Army for 3,200 hours in a salt fog chamber concluded the coating would last 20 years! Project Name: Catalog Part Number: Fixture Type: 37

Finish Options Standard Finish Options: Hartford Green Bronze Texture Custom Premium Finish Options: *note: custom options require a longer lead time and custom paint setup fee* Almond Beechwood Designer Beige Crystal White Flat White Stardust Silver Dove Gray Light Gray Dusty Gray Khaki Gray Gray Texture Satin Black Black Texture 38 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

The Desert Springs Marketplace in Desert Springs, CA features Moon Visions low voltage 14W and 22W LEDs in 5000K with mercury vapor green lenses to welcome shoppers to the entrance of the center. The bullets are powder coated a custom Weaver Tan to match the desertscape. Lighting Designer: Dana Clarke Photography by: Frankie Sanchez www.moonvisionslighting.com Project Name: Fixture ph: 214.393.7407 Type: fax: 214.635.3502 Catalog Part Number: 39

Frequently Asked Questions Do I need a separate driver for each lamp? NO. The technology is all built into the lamp itself...no remote driver; no extra labor; no ugly boxes, etc. The lamps are composed of two parts: a light engine (the LED board) and a driver, which determines the voltage either 12V or 120V. What kind of transformer do I need for the 12V LEDs? The 12V LEDs require a remote transformer. As with any low voltage installation, simply add up the number of watts you are using and purchase the transformer accordingly. Since the wattages are 1.5W, 2.5W, 5W, 7W 14W or 22Ws...it won t take much! A 500W transformer will run 20 of the largest 22W LEDs! Will these 12V LEDs work on an electronic transformer? YES! Our LED lamps will work on both a magnetic and electronic transformer. Please note: when using the electronic transformer (RS12), the LED lamp must be within 25 feet of the transformer. Are these lamps replaceable in the field if I have a failure? YES! If for any reason our PAR LED's fail, they can be replaced quite easily in the field unlike most manufacturers who have built-in LED modules in their fixture. If you do have a failure, we will test the LED engine and the LED source (12V or 120V) and only replace what is necessary. And it won't require waiting for the part from the factory or involve you reinstalling the LED module in the field with teeny tiny screws! What kind of warranty do these LED lamps have? THREE years on the Moon Visions LED lamps WITH Moon Visions fixtures. They are rated at 50,000 hours, meaning they will still be operating at 70% light output. A date code is adhered to each lamp as it leaves the factory to insure proper warranty. Note: We do not warranty our LEDs in any other manufacturer s light fixtures. How much energy does LED lighting save compared to halogen or mercury vapor lighting? The standard formula for calculating energy savings is: Old Watts New Watts Hours Energy x x 1000 in Use Rate = $ Savings So for example, replacing (8) 100 watt lights with (8) 14 watt LED lamps, burning 8 hours a night at $.12/kwh (typical TXU rate):.688 * 8 *.12 = $.66 savings per day, which is approximately $241.00 a year. Do LED lights attract bugs as much as other light sources? YES! Bugs like light...therefore they will be attracted to LEDs as much as any other source. Because our LEDs have open vents in the back to allow for air circulation, we fill our bullet knuckles with silicone to insure that bugs cannot enter the fixture from the back. This also keeps moisture and other outdoor elements from siphoning in from the knuckle. 40 www.moonvisionslighting.com ph: 214.393.7407 fax: 214.635.3502

Prices are FOB shipping point. Terms & Conditions of Sales Shipping and handling allowed on orders with a selling price of $2,500 or more, per order, per destination in the continental United States. All other orders, freight is not included and is determined at the time of shipment processing. All discrepancies must be addressed within 10 days of delivery. Title to any goods sold and the risk of loss of such goods passes to Buyer upon delivery by Seller or Seller s vendors to the carrier, and any claims or losses or damage in transit shall be filed by Buyer directly with the carrier. Buyer shall inspect all goods immediately upon delivery for concealed damage. Buyer must note any damage/shortage on carrier s delivery receipt. Buyer must report all damage to goods to the carrier within 10 days of delivery of goods. UPS damaged shipments must be reported to Seller within 10 days and must be in the original cartons at the original delivery point for inspection. Scheduled ship date is an estimate only. Seller is not responsible for missed ship dates and late deliveries caused by the carrier. Seller will not accept any back charges for late deliveries. COD orders are not accepted. If buyer does not have an active credit account with Seller, then Buyer must pay cash in advance at order entry. No returns will be accepted without prior approval. All requests must be made within 30 days of invoice date. Authorized returns will be charged for both inbound and outbound freight and a minimum service charge of thirty-five percent (35%) of the product value. Moon Visions Lighting reserves the right to make modifications or changes to any of its products, pricing, Limited Warranty, and Terms of Conditions without prior notice. Limited Warranty Information Moon Visions Lighting warrants any product or component manufactured or assembled by Moon Visions against defects in materials and workmanship for a period of 3 years from date of shipment, provided the conditions of installation and operation have been proper. At Moon Visions option, any product proven to be defective within the warranty period will either be repaired or replaced. Warranty is extended to the original buyer only. Proof of purchase is required. Moon Visions Lighting does not warranty any of our LED products if housed in any other manufacturer s product. LED Lamps must be in a Moon Visions fixture to receive full three year warranty. Ballasts, capacitors, and igniters are warranted by the ballast manufacturers. Please check the manufacturer s published warranty for the ballast in question. Non-LED lamps are not manufactured by Moon Visions and are specifically excluded from this warranty. Contact the lamp manufacturer for warranty assistance. Moon Visions shall claim warranty to be null and void for damage or failure caused by acts of God, falling objects, external forces, explosion, fire, misuse or abuse in application, or any other circumstance beyond our control.

2018 Moon Visions Lighting All rights reserved. Certain products illustrated in this catalog may be protected by applicable patents and patent pending. We reserve the right to change details of design, materials, and finishes in any way that will not alter installed appearance or reduce function and performance. Moon Visions Lighting www.moonvisionslighting.com 214.393.7407 12V & 120V LED Specification Resource Guide