Geze now partnered with Häfele! Häfele Australia and Geze are proud to announce the foundation of a new partnership. This exciting development combines the strength of Australia s most progressive Architectural Hardware company with one of the world s leading manufacturers of door technology. www.hafele.com.au GEZE DOOR TECHNOLOGY Innovative, versatile & reliable Brought to you by Häfele
WHY HÄFELE? Why choose häfele? Häfele HQ, Dandenong, Victoria Häfele represents a world of solutions spanning many countries and industries. As a global supplier of quality hardware to a dozen industries, Häfele is an innovator for everything from joining timber to moving walls. As a creator of brilliant designs for decorative elements, Among experts in the field, Häfele has become synonymous with greater convenience and pioneering ideas. or simply an established partner for every customer, Häfele doesn t just sell hardware, they provide solutions. Since the beginning Häfele have been dedicated to bringing quality not only to their products, but to each customer relationship. Quality is the driving force guiding the efforts of their employees worldwide. As the company s reach has expanded around the world, Häfele strives to make these values universal. This is accomplished through the remarkable breadth of expertise that Häfele uses every day to help customers. Whether an architect is designing a high-tech building or a manufacturer is attempting to drive down costs, Häfele will find better ways. This is our promise and commitment to all our clients and partners worldwide. Established in 1982, Häfele Australia Häfele: Thinking ahead for more than 90 years has been bringing you the latest innovations, sourced from either our own factories, or from our partners around the world, for over 30 years. With our own sales offices in all states around Australia and warehouses in Victoria, Queensland and Western Australia, we are at your side Australia wide. 2
InformaTION Page 04 Overhead door closers Concealed doors closers Floor springs Automatic swinging and sliding doors Page 09 Page Page Page 35 39 46 Häfele offers GEZE door closer systems for any type of door, with a range of individual setting options. From the most basic overhead door closer, to the multi-faceted variations suitable for use with fire and smoke protection doors. The GEZE door closer range offers a range of options to meet every requirement. The integrated door closers of the GEZE Boxer range are installed fully inside the door leaf. Therefore, the guide rail can only be seen when the door is open. The system can be used with single and double leaf doors and offers a wide range of setting options when installed. GEZE floor springs from Häfele, can be used to close single and double action doors made of various materials in a reliable manner whilst remaining subtle. The product range includes systems for light and heavy leaf weights. Häfele s automatic door systems by GEZE open up an almost unlimited range of door design options. Daily, millions of people enjoy their natural convenience. As the most modern of innovative drives, in which high performance capability, security, convenience and design are a priority, automatic door solutions from GEZE are both the focus and the eye catcher of every entrance area. Door weight calculation guide Numerical Index Page 49 Page 51 3
TS 5000 - Overhead door closers TS 4000 - overhead door closer EMD - Automatic sliding door drive BOXER CONCEALED DOOR CLOSER TS 550 NV - Floor spring 4
Slim drive - automatic sliding doors GEZE door technology from häfele INnovative, versatile & reliable Häfele Australia are proud to announce the formation of a new partnership with GEZE for the Australian market. This exciting development will combine the strength of one of Australia s most progressive Architectural Hardware companies with one of the world s leading manufacturers of door technology systems. An extensive range of optical and technical options. Door technology systems from GEZE impress with their intelligent functionality, their high perfomance, and their long life spans, as well as the integrated design lines. GEZE s quality management system has been certified to ISO 9001. GEZE door closers have been inspected and certified in accordance with the applicable standards EN 1154, EN 1155, 1158 AND AS 1428. The manufacture of these products is regularly monitored by independent test institutes. All these measures guarantee the high quality of GEZE products. GEZE products have always been developed around the needs of customers, therefore the company offers direct solutions for individual requirements aesthetic, functional and economical. 5
Door technology Information The products in this catalogue are divided into the following groups: > surface mounted door closers with projecting arm assembly > surface mounted door closers with guide channel > Concealed door closers > Floor springs > automatic swing door operators > automatic sliding door operators Accessories for the door closer and floor spring systems can be found directly after the individual systems. Appropriate Application Installation and Initiation Door closers must be used appropriately only to close pivoted or hinged doors made of timber, metal, PVC or glass after these have been opened manually. Individual floor springs can also be used for double acting doors. Door closers need to be replaced when a satisfactory and safely functioning closing action is no longer guaranteed. 1 2 The following inappropriate use must be avoided under any circumstances: > use of the door closer for applications other than closing of doors. > Obstruction of the closing action for example by scraping doors, catching seals or stiff locks. > Incorrect or inappropriate installation and setting such as banging doors. > Incorrect selection of the closer size or closing force > Catching between door frame and door leaf (risk of injury). The following points must be observed during the installation and initiation of door closers: > before the installation and initiation of the door closer, including additional installation and accessories, the relevant legal regulations need to be observed. > Door closers must be installed and adjusted correctly by qualified personnel. > Product information must be observed and has to be passed on to the clients and end users. > Door closers with hold-open devices are subject to legal controls, monitoring and maintenance procedures. > In case of particularly unfavourable local conditions (i.e. wind influence), door closers with a higher closing force must be used. > If, due to the circumstances of the door and surrounds, it cannot be avoided that the door leaf knocks against the door frame near the door pivot point, a door stop should always be used, which will limit the maximum opening angle of the door closer. > If a floor spring is in contact with water or moisture (i.e. external doors), the space between the cement casing and the housing must be filled with a suitable sealing compound. Maintenance and Repair Fire and Smoke Control Carry out the following maintenance works regularly: 3 4 > Check the safety relevant components for their sturdy positioning and for wear and tear. > Re-tighten the fixing screws and exchange defective components. > Test the settings (i.e. closing speed) and movement of the door. > If necessary, apply grease to the moving components (i.e. arm assembly). Repairs must be carried out by qualified personnel. Normally, fire and smoke control doors which have been approved by the building inspector must not be modified. The installation of a door closer or hold-open devices may require a proof of suitability in connection with the fireproof and smoke control door, a final check and an agreement or authorisation. The construction of fireproof doors is subject to the clearly defined regulations of AS1905.1-2005. In addition, there are smoke-proof doors, the regulations of which are listed in AS1905.1-1997. Only cleaning agents which do not contain corrosive elements may be used. 6
Function General door functions Closing Force Hold-Open Device 1 The closing force depends on the width of the door leaf. With most door closers, it can be set and adjusted exactly to the respective door situation. In case of particularly unfavourable local conditions (i.e. wind influence), door closers with a higher closing force must be used. 2 A door hold-open device (fixed opening) can be achieved with additional special fittings (eg: hold-open arm) or with integrated construction elements (interlocking hold open function). Door closers with hold-open arm or interlocking hold-open functions are not suitable for fireproof and smoke control doors. Door Co-ordination Free-Swing Arm Assembly 3 In case of 2-leaf doors, the door coordinator ensures the correct closing sequence of both door leaves (inactive passive leaf before active leaf). 4 With a free-swing arm assembly, the doors remain freely movable (comparable with a door without closing function), however the door closes securely in case of a fire. General Functions in the Door Operating Range EN Force Leaf Width (mm) d 1 up to 750 2 750-850 3 850-950 b a 4 950-1100 c b 5 1100-1250 6 1250-1400 a Back Check With backcheck, the swing of a forcefully opened door (manually or for example by gusts of wind) is reduced. Damage to the door handle or wall are therefore minimised or eliminated. All GEZE door closers supplied by Häfele are fitted with Back Check functionality. b closing Speed The exact setting of the closing speed guarantees a controlled closing of the door leaf. c closing Delay The Closing Delay increases the closing time so that, for example, persons carrying luggage or bulky items, mothers with prams, elderly persons, etc. have sufficient time to walk through the door. d latching Action The Latching Action controls the closing of the door and ensures, that the lock closes reliably. Fixing Types a b c d e a b c standard fixing (door leaf fixing) on the pull side standard fixing (door leaf fixing) on the push side Top jamb fixing on the pull side d e Top jamb fixing on the push side Parallel arm fixing on the push side 7
Closing force Type Page 1 2 3 4 5 6 Electromechanical hold open function Electrohydraulic hold open function With hold-open insert Central smoke alarm system Suitable for fire resistant doors Integrated door coordinator With free-swing function For double doors Delayed action Overhead door closers with arm TS 1500 BC 10 TS 2000 NVBC 12 TS 4000 15 TS 4000 E 17 Overhead door closers with guide rail TS 1500 BCG 11 TS 2000 NVBCG 13 TS 3000 VBC 14 TS 4000 G 16 TS 5000 18 TS 5000 L 19 TS 5000 E 20 TS 5000 L-E 21 TS 5000 R 22 TS 5000 L-R 23 TS 5000 ISM 24 TS 5000 L-ISM 25 TS 5000 E-ISM 26 TS 5000 L-E-ISM 27 TS 5000 R-ISM 28 TS 5000 L-R-ISM 29 TS 5000 EFS 30 TS 5000 RFS 31 TS 5000 S 32 Accessories 33 Concealed door closers Boxer I 36 Boxer II 37 Boxer P 38 Floor springs TS 500 NV 40 TS 550 NV 41 Accessories 42-45 8
GEZE OVERHEAD DOOR CLOSERS 9
OVERHEAD DOOR CLOSERS TS 1500 BC EN 3, 4 > : Supplied with back check function > Adjustment facility: Closing force, closing speed and latching action adjustable > Installation: suitable for standard installation on pull side or overhead installation on push side > Closing force: 3 or 4 in compliance with EN 1154 > Door width: <1,100 mm > Hold open angle: 70 150 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 TS 1500 BC with standard arm 931.17.149 TS 1500 BC with hold-open arm 931.17.159 Parallel arm bracket to suit TS 1500 931.16.329 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 10
OVERHEAD DOOR CLOSERS TS 1500 BCG EN 1 390 20.5 50 177 30 93 39 > Features: DDA compliant > : Supplied with back check function > Adjustment facility: Closing speed and latching action adjustable > Installation: Suitable for standard installation on pull side > Closing force: 1 in compliance with EN 1154 > Door width: <750 mm > Hold open angle: 80 130 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 TS 1500 BCG with guide rail 931.17.169 TS 1500 BCG with guide rail and hold-open insert 931.17.179 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 11
OVERHEAD DOOR CLOSERS TS 2000 NVBC EN 2, 3, 4 60 226 approx. 300 48 98 98 48 approx. 300 > : Supplied with back check function > Adjustment facility: Closing force adjustment of the sizes 2, 3 and 4 from the side, closing speed adjustable from the front, latching action adjustment from the front > Installation: suitable for standard installation on pull side or overhead installation on push side > Closing force: 2, 3, 4 in compliance with EN 1154 > Door width: <1,100 mm > Hold open angle: 70 150 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1997 TS 2000 NVBC with standard arm 931.16.269 TS 2000 NVBC with hold-open arm 931.16.279 Parallel arm bracket to suit TS 2000 931.16.329 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 12
OVERHEAD DOOR CLOSERS TS 2000 NVBCG EN 1, 2, 3 > Features: DDA compliant > : Supplied with back check function > Adjustment facility: variable closing force (size EN2 and EN3) Closing speed valve adjustable, latching action valve adjustable Optional with hold-open device (not fire rated) > Installation: Suitable DIN right hand and DIN left hand > Closing force: 1-3 In compliance with EN 1154 > Door Width (mm): 750-950mm > max. door opening angle: Approx. 130º > Hold open angle: 80-130º > Standard: Certified in compliance with EN 1154:1997 TS 2000 NVBCG with guide rail 931.16.289 TS 2000 NVBCG with hold-open guide rail 931.16.299 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 13
OVERHEAD DOOR CLOSERS TS 3000 VBC EN 1-4 44 60 20.5 226 30.5 46 15 46 100 100 100 46 30.5 30.5 > : Supplied with back check function > Adjustment facility: Latching action and closing speed adjustable from the front, closing force adjustable from the side > Installation: standard installation (door leaf installation) on pull side, overhead installation (transom fixing) on pull side > Closing force: 1 4 in compliance with EN 1154 > Door width: <1,100 mm > Hold open angle: 80 130 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 TS 3000 VBC with guide rail 931.10.699 TS 3000 VBC with guide rail and hold-open insert 931.10.709 TS 3000 VBC set with T-Stop guide rail 931.10.899 Note: TS 3000 VBC is designed for pull side operation only. Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 14
OVERHEAD DOOR CLOSERS TS 4000 EN 1-6 60 287 approx. 300 46 98 98 46 approx. 300 > Adjustment facility: Closing force, closing speed and back check adjustable, latching action adjustment with arm > Installation: suitable for standard installation on pull side and overhead installation on push side > Closing force: 1 6 in compliance with EN 1154 > Door width: <1,400 mm > Hold open angle: Up to approx. 150 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 TS 4000 set with standard arm 931.16.579 TS 4000 set with hold-open arm 931.16.589 Parallel arm bracket to suit TS 4000 931.16.329 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 15
OVERHEAD DOOR CLOSERS TS 4000 G EN 1-5 445 60 20.5 287 30.5 46 98 98 46 30.5 46 > Features: DDA compliant > Adjustment facility: Closing force valve adjustable Closing speed valve adjustable Available with adjustable back check > Closing force: 1-5 In compliance with EN 1154 > Door Width (mm): 650-1250mm > max. door opening angle: Approx. 130º > Mounting: suitable for DIN right hand and DIN left hand > Standard: Certified in compliance with EN 1145 TS 4000 G set with guide rail 931.17.189 TS 4000 G with hold-open guide rail 931.17.199 Note: TS 4000 G is designed for pull side operation only. Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 16
OVERHEAD DOOR CLOSERS TS 4000 E 118 58 98 325 46 60 46 46 > : When voltage is applied to closer, the door is held open. When voltage is not present, the door will close automatically The door can be closed manually at any time regardless of whether the voltage is applied or not > Adjustment facility: Closing speed and closing force is valve adjustable from the front Optical indicator for closing force Latching action adjustable via arm position > Mounting: suitable for DIN right hand and DIN left hand > Operating voltage: 24V DC ±10% > Enclosure rating: IP43 > Closing Force: 1-6 in compliance with EN 1154 > Hold open angle: 80-175º > Standard: Certified in compliance with EN 1154 and EN1155 > Door width: <1400mm TS 4000 E set with standard arm 931.16.559 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 17
OVERHEAD DOOR CLOSERS TS 5000 EN 2-6 44 60 20.5 30.5 46 100 100 46 30.5 > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: suitable for standard installation on pull side and overhead installation on push side > Closing force: 2 6 in compliance with EN 1154 > Door width: <1,400 mm > Opening angle: <180 > Hold open angle: 80 130 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 TS 5000 set with guide rail 931.10.609 TS 5000 set with guide rail and hold-open insert 931.10.619 TS 5000 set set with T-Stop guide rail 931.11.249 Note: T-stop guide rail should be used for all external installations Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 18
OVERHEAD DOOR CLOSERS TS 5000 L EN 2-6 60 20.5 287 30.5 100 46 > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: suitable for standard installation on push side > Closing force: 2 6 in compliance with EN 1154 > Door width: <1,400 mm > Opening angle: <110 > Hold open angle: 80 110 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 TS 5000 L set with guide rail 931.10.629 TS 5000 L set with guide rail and hold-open insert 931.10.639 TS 5000 L set set with T-Stop guide rail 931.11.259 Note: T-stop guide rail should be used for all external installations Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 19
OVERHEAD DOOR CLOSERS TS 5000 E EN 2-6 49 60 30 287 40 110 46 > : supplied with electromechanical hold open function > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: suitable for standard installation on pull side > Closing force: 2 6 in compliance with EN 1154 > Door width: <1,400 mm > Nominal voltage: 24 V DC ±10% > Connecting load: <100 ma > Degree of protection: IP 43 (for indoor use only) > Rated for continuous duty: 100% > Opening angle: <180 > Hold open angle: 80 130 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1155 TS 5000 E set with E guide rail 931.10.769 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 20
OVERHEAD DOOR CLOSERS TS 5000 L-E EN 2-6 49 60 30 40 287 40 110 46 > : supplied with electromechanical hold open function > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: suitable for standard installation on push side > Closing force: 2 6 in compliance with EN 1154 > Door width: <1,400 mm > Nominal voltage: 24 V DC > Connecting load: <100 ma > Degree of protection: IP 43 (for indoor use only) > Rated for continuous duty: 100% > Opening angle: <110 > Hold open angle: 80 130 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1155 TS 5000 L-E set with E guide rail 931.10.669 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 21
OVERHEAD DOOR CLOSERS TS 5000 R EN 2-6 42 60 30 287 57 110 46 > : supplied with electromechanical hold open function, integrated central smoke switch unit, additional smoke alarms can be connected > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: suitable for standard installation on pull side > Closing force: 2 6 in compliance with EN 1154 > Door width: <1,400 mm > Nominal voltage: 230 V AC > Connecting load: <200 ma > Degree of protection: IP 20 > Opening angle: <180 > Hold open angle: 80 130 > Operating temperature range: 0 +50 C > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1155 TS 5000 R set with R guide rail 931.10.789 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 22
OVERHEAD DOOR CLOSERS TS 5000 L-R EN 2-6 42 745 60 30 287 55 110 46 > : supplied with electromechanical hold open function, integrated central smoke switch unit, additional smoke alarms can be connected > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: suitable for standard installation on push side > Closing force: 2 6 in compliance with EN 1154 > Door width: <1,400 mm > Nominal voltage: 230 V AC > Connecting load: <230 ma > Degree of protection: IP 20 > Opening angle: <110 > Hold open angle: 80 130 > Operating temperature range: -5 +50 C > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1155 TS 5000 L-R set with R guide rail 931.10.679 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 23
OVERHEAD DOOR CLOSERS TS 5000 ISM EN 2-6 85 = B - 1132 85 110 110 60 60 287 287 B Hinge distance B 1,300 2,800 mm 40 43 67 15 Detail 47 > Area of application: For double doors > : supplied with 2 closers and door coordinator (integrated in ISM guide rail) > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: suitable for standard installation on pull side > Closing force: 2 6 in compliance with EN 1154 > For door width: b = 1,300 2,800 mm > Opening angle: <180 > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1158 TS 5000 ISM set with ISM guide rail 931.11.759 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 24
OVERHEAD DOOR CLOSERS TS 5000 L-ISM EN 2-6 = B - 1260 35 60 60 287 90 B Hinge distance B 1,360 2,800 mm 55 30 10 80 Detail 47 > Area of application: For double doors > : supplied with 2 basic closers and door coordinator (integrated in ISM guide rail) > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: suitable for standard installation on push side > Closing force: 2 6 in compliance with EN 1154 > For door width: b = 1,360 2,800 mm > Opening angle: <120 > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1158 TS 5000 L-ISM set with ISM guide rail 931.11.369 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 25
OVERHEAD DOOR CLOSERS TS 5000 E-ISM EN 2-6 85 = B - 1132 85 110 110 60 60 287 287 Hinge distance B 1,300 2,800 mm 40 B 43 67 15 Detail 47 > Area of application: For double doors > : supplied with 2 closers and door coordinator (integrated in E-ISM guide rail) with electromechanical hold open function > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: Suitable for standard installation on pull side > Closing force: 2 6 in compliance with EN 1154 > For door width: B = 1,300 2,800 mm > Nominal voltage: 24 V DC ±15% > Connecting load: 2 x 100 ma > Degree of protection: IP 43 (for indoor use only) > Rated for continuous duty: 100% > Opening angle: <180 > Hold open angle: 80 130 > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1158 TS 5000 E-ISM with E-ISM guide rail 931.11.769 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 26
OVERHEAD DOOR CLOSERS TS 5000 L-E-ISM EN 2-6 120 = B - 1105 35 155 60 60 90 287 287 B Hinge distance B 1,360 2,800 mm 55 30 10 80 Detail 47 > Area of application: For double doors > : supplied with 2 closers and door coordinator (integrated in E-ISM guide rail) with electromechanical hold open function > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: Suitable for standard installation on push side > Closing force: 2 6 in compliance with EN 1154 > For door width: B = 1,360 2,800 mm > Nominal voltage: 24 V DC ±15% > Connecting load: 2 x 100 ma > Degree of protection: IP 43 (for indoor use only) > Rated for continuous duty: 100% > Opening angle: <110 > Hold open angle: 80 130 > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1158 TS 5000 L-E-ISM with E-ISM guide rail 931.11.329 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 27
OVERHEAD DOOR CLOSERS TS 5000 R-ISM EN 2-6 85 = B - 1132 85 110 110 60 60 287 287 B Hinge distance B 1,500 2,800 mm 40 43 67 15 Detail 47 > Area of application: For double doors > : supplied with 2 closers and door coordinator (integrated in R-ISM guide rail) with electromechanical hold open function and integrated central smoke switch unit. Additional smoke alarms can be connected > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: Suitable for standard installation on the pull side > Closing force: 2 6 in compliance with EN 1154 > For door width: B = 1,500 2,800 mm > Nominal voltage: 230 V AC > Connecting load: < 200 ma > Degree of protection: IP 20 > Operating temperature range: 0 + 50 ºC > Opening angle: <180 > Hold open angle: 80 130 > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1158 TS 5000 R-ISM with R-ISM guide rail 931.11.799 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 28
OVERHEAD DOOR CLOSERS TS 5000 L-R-ISM EN 2-6 120 = B - 1105 35 155 60 60 90 287 287 B Hinge distance B 1,560 2,800 mm 55 30 10 80 Detail 47 > Area of application: For double doors > : supplied with 2 closers and door coordinator (integrated in R-ISM guide rail) with electromechanical hold open function and integrated central smoke switch unit, additional smoke alarms can be connected > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: Suitable for standard installation on push side > Closing force: 2 6 in compliance with EN 1154 > For door width: B = 1,560 2,800 mm > Nominal voltage: 230 V AC > Connecting load: < 200 ma > Degree of protection: IP 20 > Operating temperature range: 0 +50 C > Hold open angle: 80 130 > Opening angle: <110 > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1158 TS 5000 L-R-ISM set with R-ISM guide rail 931.11.349 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 29
OVERHEAD DOOR CLOSERS TS 5000 EFS EN 2-5 452.5 30 60 325 33 16 110 47 3 47 110 33 Standard installation Overhead installation > : Supplied with free-swing function > Adjustment facility: Closing force, closing speed and latching action adjustable from the front > Installation: Suitable for standard or overhead installation on pull side > Closing force: 2 5 in compliance with EN 1154 > Door width: <1,250 mm > Nominal voltage: 24 V DC > Opening angle: <180 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1155 TS 5000 EFS set with guide rail for standard installation 931.10.069 TS 5000 EFS set with guide rail for overhead installation 931.10.079 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 30
OVERHEAD DOOR CLOSERS TS 5000 RFS EN 2-5 30 745 60 325 55 16 110 47 > : supplied with integrated smoke detector with power supply unit, with free-swing function > Adjustment facility: Closing force, closing speed and latching action adjustable from the front > Installation: Suitable for standard installation on pull side > Closing force: 2 5 in compliance with EN 1154 > Door width: <1,250 mm > Nominal voltage: 230V AC > Opening angle: <180 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 and EN 1155 TS 5000 RFS set with guide rail for standard installation 931.10.059 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 31
OVERHEAD DOOR CLOSERS TS 5000 S EN 2-6 44 60 20.5 287 30.5 100 46 > : Supplied with delayed closing action > Adjustment facility: Closing force, closing speed, back check and latching action adjustable from the front > Installation: Suitable for standard installation on pull side > Closing force: 2 6 in compliance with EN 1154 > Door width: <1,400 > Opening angle: <180 > Hold open angle: 80 130 > Mounting: For DIN left hand and DIN right hand use > Delayed closing action: <30 seconds > Standard: Certified in compliance with EN 1154:1996/A1:2002 TS 5000 S set with guide rail 931.11.859 TS 5000 S set with guide rail and hold-open insert 931.11.899 Fire resistance and smoke control Tested for fire resistance and smoke control doors. Further information available upon request. 32
Accessories Clamping plates For frameless glass doors For TS 2000 > Area of application: For mounting door closer to all-glass doors > For glass thickness: 8 10 mm Finish Silver Coloured 931.16.379 For TS 3000 > Area of application: For mounting door closer to all-glass doors > For glass thickness: 10 mm Finish Silver Coloured 931.10.509 For TS 4000 and TS 5000 > Area of application: For mounting door closer to all-glass doors > For glass thickness: 8 10 mm Finish Silver Coloured 931.16.319 Cover Cap for TS 5000 / TS 4000 / TS 3000 / TS 2000 > Area of application: Cover cap for basic closer To suit door closer TS 2000 / TS 3000 TS 4000 / TS 5000 Silver coloured Stainless steel coloured Dark bronze Brass coloured White, RAL 9016 931.10.429 931.10.420 931.10.421 931.10.428 931.10.427 931.10.409 931.10.400 931.10.401 931.10.408 931.10.407 33
360º Project Service Helping you put the pieces together It takes time to complete a new building and carry out the work that is subsequently required. Planning, tendering and order placement, order processing and the post-handover phase each have their own requirements. Competence in project support & services During the course of planning, 360º Project Service provides assistance with the creation of detailed planning manuals, tailored seminars addressing specific topics, tendering texts, application examples, CAD files and other planning and support such as Based on specific market demands and with a background of mounting instructions, available at www.hafele.com.au over 90 years experience worldwide, Häfele s 360º Project Service represents a portfolio of services that can meet these needs. However, planning also means: calculating, evaluating and comparing. One of the objectives of project advice is to look for and A comprehensive service on the one hand and an extensive range of Architectural Hardware and Furniture Fittings on the other, effectively relieves the pressure on Property Developers, Architects, Planners find the best individual solution for the project. This includes not just in depth requirement analysis, but also consistent brand and manufacturer-independent advice. and Processing Companies. The wide range of services means that the customer has a single contact for all phases of the project. This is not just convenient, but also ensures the construction decisions that have been made are consistently implemented, and Häfele s enthusiastic and qualified design consultants can assist with integrated and coordinated hardware selection and prepare clear and precise door schedules according to specific project requirements. the interests of all parties involved are looked after from the planning phase to the completion of the project. ORDER Processing & handover Häfele coordinates and monitors all deadlines and logistical services over the entire construction period This is made possible because of our individual construction site logistics and just-in-time delivery capability, which Häfele provides with its global sales network and state-of-the-art logistics centres. A central pillar of this service offering is manufacturer independent advice on Architectural and Furniture Hardware. Häfele s specification team are competent, solution oriented partners for architects, builders, investors, specialists, consultants and general contractors. In addition, Häfele also offers extensive support in all phases of the project development. For example, specialized planning aids facilitate the development and implementation of electronic access control systems, lighting concepts in furniture and furnishings, as well as sliding door solutions. Integrated project coordination until handover ensures that the standard of all construction work is consistently high, and guarantees adherence to the defined interests of Property Developers, Architects and Planners throughout all phases of a project. 34
CONCEALED DOOR CLOSERS 35
Concealed DOOR CLOSERS BOXER I EN 2-4 45 440 45 270 20 30 30 31 31 20 30 12 20.7 30 30 440 45 32 45 32 45 32 45 > Area of application: Door closer and guide rail for concealed installation in door 20 20 30 > : With mechanical, electromechanical or without hold open function > Adjustment facility: Closing force and closing speed continuously adjustable, latching action hydraulically adjustable, hydraulic backcheck adjustable 30 20 3130 31 > Closing force: 2 4 in compliance 32 with EN 1154 32 32 32 32 32 32 32 > For door thickness: >40 mm > Door width: <1,100 mm 12 45 > Max. door weight: 130 kg >40 40 > Opening angle: <120 > Hold open angle: 80 120 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 270 12 45 20.7 45 >40 Flush door without holdopen function 20.7 12 45 45 40 Flush door with mechanical holdopen function 45 45 50 50 40 50 50 50 Rebated door without holdopen function 20.7 30 Rebated door with mechanical hold-open function 30 45 40 Flush door with electromechanical holdopen function Rebated door with electromechanical holdopen function Boxer I set with guide rail 931.14.689 Boxer I set with guide rail and hold-open insert 931.15.009 Boxer I set with guide rail and electromechanical hold-open function 931.14.529 36
Concealed DOOR CLOSERS BOXER II EN 3-6 54 440 54 274 12 12 20.7 12 20 20.7 20.7 30 30 31 3 30 54 40 440 54 54 54 54 54 54 54 40 40 40 40 40 40 54 > Area of application: Door closer and guide rail for concealed installation in door 20 20 30 > : With mechanical, electromechanical or without hold-open function > Adjustment facility: Closing force and closing speed continuously adjustable, latching action hydraulically adjustable, hydraulic backcheck adjustable 20 30 3130 31 > Closing force: 3 6 in compliance with EN 1154 40 40 40 40 > For door thickness: >50 mm 40 40 > Door width: <1,400 mm > Max. door weight: 180 kg 50 60 50 60 > Opening angle: <120 50 60 60 > Hold open angle: 80 120 12 54 > Mounting: For DIN left hand and DIN right hand use > Standard: Certified in compliance with EN 1154:1996/A1:2002 12 54 274 50 Flush door without hold open function 20.7 12 54 Rebated door without hold open function 50 60 Flush door with mechanical hold open function 50 60 50 50 20.7 54 20.7 30 54 54 Rebated door with mechanical hold open function Flush door with electromechanical hold open function 30 54 Rebated door with electromechanical hold open function 60 Boxer II set with guide rail 931.14.699 Boxer II set with guide rail and hold-open insert 931.15.019 Boxer II set with guide rail and electromechanical hold-open function 931.14.559 37
Concealed DOOR CLOSERS BOXER P EN 2-4 440 270 20 20 45 45 12 12 45 32 32 Without hold open function With mechanical hold open function > Area of application: For double action doors, door closer and guide rail for concealed installation in door > : With mechanical, electromechanical or without hold-open function > Adjustment facility: Closing force, latching action, hydraulic backcheck and closing speed continuously adjustable > Closing force: 2 4 in compliance with EN 1154 > For door thickness: >40 mm > Door width: <1,100 mm > Max. door weight: 80 kg > Opening angle: <120 > Hold open angle: 80 120 > Standard: Certified in compliance with EN 1154:1996/A1:2002 Boxer P set with guide rail 931.14.789 Boxer P set with guide rail and mechanical hold-open function 931.15.029 38
FLOOR SPRINGS 39
Floor Springs TS 500 NV EN 1-4 > Area of application: For single action and double action doors > : With fixed back check, with or without hold-open function, safety valve against overloading > Adjustment facility: Closing force, closing speed and latching action adjustable > Closing force: 1 4 in compliance with EN 1154 > Door width: <1,100 mm > Door weight: <150 kg > Material thickness: 1 mm > Mounting: Edges can be broken off for single action doors for DIN left hand and DIN right hand use > Closing effect: From approx. 170 > Standard: Certified in compliance with EN 1154:1996/A1:2002 > Finish: stainless steel matt (cover plate) Note: > set contains floor springs and cover plate. > GEZE Sealing Compound must be used for all external installations or where moisture is present TS 500 NV set without hold-open function 932.10.047 TS 500 NV set with hold-open function (90º angle) 932.10.049 Packing: 1 set 40
Floor Springs TS 550 NV EN 3-6 > Area of application: For single action and double action doors > : With fixed back check, with delayed action, with or without hold-open function, can be enabled or disabled, safety valve against overloading > Adjustment facility: Closing force, closing speed and latching action adjustable > Closing force: 3 6 in compliance with EN 1154 > Door width: <1,400 mm > Door weight: <300 kg > Hold open angle: 85-165º > Material thickness: 1.5 mm > Mounting: Edges can be broken off for single action doors for DIN left hand and DIN right hand use > Closing effect: From approx. 170 > Standard: Certified in compliance with EN 1154:1996/A1:2002 > Finish: stainless steel matt (cover plate) Note: > set contains floor springs and cover plate. > GEZE Sealing Compound must be used for all external installations or where moisture is present TS 550 NV set 932.10.054 Packing: 1 set 41
Accessories Top pivot for single action doors > Area of application: For rebated and flush single action doors > Material: steel > Finish: Galvanised 932.10.420 Lower door strap for single action doors > Area of application: For welding to steel doors, for screw fixing to rebated and flush wooden doors or light metal doors > Material: steel > Finish: Galvanised 932.10.200 Top pivot cover cap > Area of application: For flush doors > Material: Aluminium 932.10.529 Packing: 1 pair Lower door strap cover cap > Area of application: For flush doors > Material: Aluminium DIN left 932.10.519 DIN right 932.10.509 42
Top pivot cover cap > Area of application: For rebated doors > Material: Aluminium DIN left 932.10.569 DIN right 932.10.559 Packing: 1 pair Lower door strap cover cap > Area of application: For rebated doors > Material: Aluminium DIN left 932.10.549 DIN right 932.10.539 Adjustable double action top pivot for double action doors > : Adjustable, with or without angle (optional) > Material: Stainless Steel > Finish: brushed Double action top pivot with angle Double action top pivot with angle 932.10.400 Double action top pivot without angle 932.10.410 Double action top pivot without angle Adjustable top pivot cover plate > Material: Steel > Finish: Galvanised 932.10.589 43
Accessories Door strap for double action doors > Material: Steel > Finish: Galvanised 932.10.270 Double action bottom strap > Area of application: For doors with bearing hinges > Material: Steel > Finish: Galvanised 932.10.440 Guide rail > Area of application: For double action bottom strap, for doors with bearing hinges > Material: Steel > Finish: Galvanised 932.10.430 Spindle extensions for floor springs > Features: To increase the floor clearance (i.e. for doors with thresholds or floors fitted with carpets) With radial serrations > Mounting: Suitable for DIN right hand and DIN left hand Length (L) mm 5 932.10.700 10 932.10.703 15 932.10.705 20 932.10.706 25 932.10.707 44
5º Offset spindle for floor springs > Features: Provides a preload pressure to hold door in closed position Left Hand 932.10.770 Right Hand 932.10.771 TS 137B Pivot bearing with flat conical axle > max. door leaf weight (kg): 250 Finish Brushed Stainless Steel 932.10.601 TS 137B Cover plate Finish Brushed Stainless Steel 932.10.602 Sealing Compound > Features: Low viscous, 2-part reactive resin to be used for sealing gaps between floor spring and installation box > Area of application: For use with external or wet area applications (0.4kg) 932.10.310 Note: > GEZE Sealing Compound must be used for all external installations or where moisture is present 45
Automatic Swing Doors EMD-F EMD EC-Turn Powerturn > GEZE offer a comprehensive range of electronically operated swing door mechanisms to suit all commercial and residential applications. > GEZE automatic swing door mechanisms are designed specifically for large and heavy doors, and also to provide maximum accessibility and increased safety. > Please contact your local Häfele sales office for further details on the GEZE automatic swing door product range. 46 GEZE DOOR TECHNOLOGY / 08.15
Automatic Sliding Doors EC Drive Slim Drive Power Drive > GEZE offer a comprehensive range of sliding doors are space saving, elegant and modern. > The large number of variations available in the GEZE automatic sliding door product range, means that the perfect system can be provided for every application - large or small, commercial or residential. > Please contact your local Häfele sales office for further details on the GEZE automatic sliding door product range. 47
Project References A wide range of projects in many different categories, qualities and equipment have successfully utilised GEZE door technology both in Australia and abroad. You can request project references in your area from Häfele at any time. Burj Al Arab, Dubai, UAE BMW Museum, Munich, Germany Palacio de las Artes, Valencia, Spain Vienna University of Economics and Business, Vienna, Austria Neuer Zollhof, Dusseldorf, Germany Cologne Arena, Cologne, Germany 48
Door weight calculation guide Steel Note Please refer to the Building Code and relevant Australian Standards for Glass to determine suitable glass type and maximum permissible size for each individual application. The information on this page is a guide only. Softwoods and Hardwoods Standard doors 2040 mm high x 35 mm thick Width (mm) Hollow core (kg) Solid core (kg) 620 11.8 22.8 720 13.0 31.6 770 14.0 33.8 820 14.8 36.0 870 15.0 38.2 Softwoods and Hardwoods Seasoned weight: kg/m3 Blackbutt 930 Brush Box 930 Canada Pine 460 Douglas Fir (Oregon) 480/ 560 Hoop Pine 540 Pacific Maple (Meranti) 450/ 720 Radiata Pine 480 Red Cedar 420 Red Mahogany 500 Redwood 450 Spotted Gum 930 Sydney Blue Gum 910 Tallowwood 990 Tasmanian Oak 680 Turpentine 910 Western Red Cedar 370 White Cypress Pine 690 Ply, Hardboard, Wallboards, MDF etc. Type Thickness (mm) kg/m2 Plywood 4.5 2.50 Hardwood 3.0 3.30 Wallboard - Plaster 10.0 6.70 13.0 0 Fibre Cement 6.0 11.00 9.0 17.00 12.0 22.50 Medium Density Fibreboard (MDF) Aluminium 6.0 4.80 9.0 7.20 12.0 9.40 16.0 12.60 18.0 13.88 25.0 19.30 32.0 25.10 40.0 27.00 Type Thickness (mm) kg/m2 Steel Sheet 0.5 3.93 1.0 7.85 2.0 15.70 3.0 23.55 Steel Cladding 0.5 5.03 0.7 6.90 0.9 8.82 Expanded 10 mm mesh 0.6 1.61 Various Materials Type kg/m3 Brass 8,410 Expanded Polystyrene 16 Lead 11,422 Marble 2,723 Solid Timbers Type Thickness (mm) kg/m2 Oak 16 10.88 19 12.92 Pine 16 8.80 19 10.50 Teak 16 9.92 19 11.80 Laminex Structural MR, Lamiwood and Vertiboard Type Thickness (mm) kg/m2 Structural MR 18 14.32 25 20.04 33 26.88 Lamiwood 5 4.86 9 7.44 12 9.82 16 13.08 18 14.32 25 20.04 32 26.06 Vertiboard 10 8.14 13 10.48 16 12.90 18 14.11 25 19.75 35 26.49 Glass Type Thickness (mm) kg/m2 Glass 4 10 6 15 8 20 10 25 12 30 15 37.5 19 47.5 Type Thickness (mm) kg/m2 Sheet 1.2 3.71 1.6 4.88 2.0 6.20 49
SLIDING AND FOLDING ERGONOMICS, EFFICIENCY AND AESTHETICS. WE SIMPLY CALL IT FUNCTIONALITY. The 2014 Häfele Sliding and Folding catalogue for Furniture and Buildings contains the very latest ergonomic, efficient and aesthetically pleasing sliding and folding door solutions available from Häfele for you, the architect, the developer, investor, builder or installer. With solutions for timber, glass or framed doors, there is a new design freedom that can be found within these pages to make your next project exciting and successful. Download your free copy now at: www.hafele.com.au 50
Numerical INDEX Dimensions in mm Dimensional data not binding. We reserve the right to alter specifications without notice 931. 931.10.059... 31 931.10.069... 30 931.10.079... 30 931.10.400... 33 931.10.401... 33 931.10.407... 33 931.10.408... 33 931.10.409... 33 931.10.420... 33 931.10.421... 33 931.10.427... 33 931.10.428... 33 931.10.429... 33 931.10.509... 33 931.10.609... 18 931.10.619... 18 931.10.629... 19 931.10.639... 19 931.10.669... 21 931.10.679... 23 931.10.699... 14 931.10.709... 14 931.10.769... 20 931.10.789... 22 931.10.899... 14 931.11.249... 18 931.11.259... 19 931.11.329... 27 931.11.349... 29 931.11.369... 25 931.11.759... 24 931.11.769... 26 931.11.799... 28 931.11.859... 32 931.11.899... 32 931.14.529... 36 931.14.559... 37 931.14.689... 36 931.14.699... 37 931.14.789... 38 931.15.009... 36 931.15.019... 37 931.15.029... 38 931.16.269... 12 931.16.279... 12 931.16.289... 13 931.16.299... 13 931.16.319... 33 931.16.329... 10 931.16.329... 12 931.16.329... 15 931.16.379... 33 931.16.559... 17 931.16.579... 15 931.16.589... 15 931.17.149... 10 931.17.159... 10 931.17.169... 11 931.17.179... 11 931.17.189... 16 931.17.199... 16 932. 932.10.047... 40 932.10.049... 40 932.10.054... 41 932.10.200... 42 932.10.270... 44 932.10.310... 45 932.10.400... 43 932.10.410... 43 932.10.420... 42 932.10.430... 44 932.10.440... 44 932.10.509... 42 932.10.519... 42 932.10.529... 42 932.10.539... 43 932.10.549... 43 932.10.559... 43 932.10.569... 43 932.10.589... 43 932.10.601... 45 932.10.602... 45 932.10.700... 44 932.10.703... 44 932.10.705... 44 932.10.706... 44 932.10.707... 44 932.10.770... 45 932.10.771... 45 51
732.04.692 - GEZE DOOR TECHNOLOGY - 08.2015 Häfele Australia Pty. Ltd. 8 Monterey Road Dandenong Victoria 3175 Phone: 1300 659 728 Fax: (03) 9212 2001 Email: info@hafele.com.au www.hafele.com.au Häfele New Zealand Ltd. 16 Accent Drive East Tamaki Auckland 2013 Phone: 0800 442 335 Email: info@hafele.co.nz www.hafele.co.nz HÄFELE LOCATIONS: Australia I MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH New Zealand I AuCkland I Wellington I Christchuch