S 99 FL/FLR EN 25 Freeswing slide channel door closer in ontur design
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER FOR ESY USE OF FIRE ND SMOKE HEK DOORS OMINED WIH SFE LOSING IN N EMERGENY he S 99 FL in the ontur design is a holdopen device with a freeswing function from a door opening angle of > 0, which, combined with a smoke detector system (e.g. RMZ), can be used as a holdopen system for fire doors. n integrated solution, i.e. holdopen device with freeswing function from a door opening angle of > 0, plus builtin smoke detector system, Plus points For the trade Ideal complement to the product range lear range structure for easy stock management is also available in the form of the S 99 FLR or S 99 FLRK. In both systems, the door can be operated without resistance thanks to their freeswing feature. In the event of an alarm or power failure, however, the door is reliably closed by the reinstated action of the door closer. ertified to ISO 9001. Universally suitable for single or double doors Uniform appearance matching all products of the DORM ontur design Data and features S 99 FL S 99 FLR S 99 FLRK djustable spring strength setting Size EN 25 Standard doors 1250 mm Fire and smoke check doors 1250 mm Nonhanded Slide channel losing speed adjustable at valve Latching action adjustable at valve ushioned limit stay, mechanical Freeswing function from a door opening angle of > 0 Weight in kg 5.2 5.9 5.7 Dimensions in mm (without slide channel) Length Overall depth Height 41 52 71 785 52 71 Door closer compliant with EN 1154 41 52 71 For the installer/fabricator Easy and quick to fit Flexible application suitability thanks to standard leaf or overhead transom installation For the architect/specifier Meets legal requirements for barrierfree building pproval certification For the user Freeswing function from a door opening angle of > 0 Resistancefree opening of doors in passive/preventive fire protection applications Maximum degree of user safety S 99 FL he S 99 FL is approved and certified by the MP NRW, Dortmund, to EN 1155. When using the S 99 FL in a transommounted arrangement, a certificate of compliance in conjunction with the relevant fire and smoke check door is mandatory. S 99 FLR he S 99 FLR is approved and certified by the MP NRW, Dortmund, to EN 1155. pproved by the German Institute for uilding echnology, erlin, for use as a holdopen system. n acceptance inspection is mandatory. ertificate of compliance in conjunction with the fire and smoke check door concerned is additionally required. S 99 FLRK he S 99 FLRK is certified and approved by the MP NRW, Dortmund, to EN 1155. pproved by the German Institute for uilding echnology, erlin, for use as a holdopen system. n acceptance inspection is mandatory. Holdopen device compliant with EN 1155 Holdopen device compliant with DIN EN 1467 under preparation mark for building products Functions Smoke detector Release device Power supply unit Smoke detection Scattered light principle Optical sensor onnection of other detectors otal installed load (max.) for further detectors in W 7.8 LED indicators larm Standby Maintenance due ontaminated Input voltage 24 V D ± 15 % 20 V 10 % / 15 % Output voltage 24 V D Power consumption in W 2 14.8 Floating changeover contact, safety extra low voltage (SELV) 24 V /D 1 Reset Manual reset onnection terminals for external manual release Degree of protection IP 20 yes no optional Note ccording to the regulations governing holdopen systems issued by the Institute of uilding echnology (DIt), erlin, a manual release switch (e.g. DORM H) must be provided for freeswing door closers. his switch must be red and carry the inscription lose Door. he switch must be located in the immediate vicinity of the door and must not be hidden by the opened door. S 99 FLR / FLRK he smoke detector unit has to be replaced after 8 years according to DIN 14677. Having reached the replacement time, a lightemitting diode will light continuously. 2 DORM
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER S 99 FL 506,5 1 428 106 71 16 11 16 18 18 2 52 9 4 64 160 200 41 S 99 FLR 785 52 40 69 11 29 64 2 106 71 18 18 16 11 16 1 428 441 S 99 FLRK 40 428 864 59,5 71 11 16 16 115 18 18 0 52 9 4 200 64 160 41 Freeswing function from an opening angle > 0 s the door is opened, the freeswing function is activated from an opening angle of > 0. he freeswing function enables the door to be opened with ease by reducing the amount of resistance encountered by the user. he door remains freely operable and is not automatically closed, facilitating access in both directions in heavily frequented zones and passageways. In the event of a fire or power failure, the door is automatically and safely closed by the door closer. his system is ideal for ensuring the closure of fire and smoke check doors in senior homes, centres for the disabled, hospitals and clinics. 2 1 1 Freeswing range 2 Fully controlled closing action (mechanical) DORM
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER S 99 FL PPLIIONS ND FIXING max. 10 2 14 150 441 428 42 65 16 110 120 72 4 24 V D 78 175 142 160 Door closer S 99 FL in standard application (door leaf fixing) Examples: nticlockwiseclosing (ISO 6/LH) door; mirrored arrangements apply to clockwiseclosing (ISO 5/RH) doors 450 171 200 ø 8 24 V D max. 7 78 11 6 41,5 2 84 150 428 14 441 175 27,5 42 Door closer S 99 FL in frame mounted (transom fixing) Examples: nticlockwiseclosing (ISO 6/LH) door; mirrored arrangements apply to clockwiseclosing (ISO 5/RH) doors 4 DORM
1 2 4 5 S 99 GSREMR S 9 GSREMR S 99 FLR PPLIIONS ND FIXING S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER 504 126,5 171 200 40 max. 7 78 ø 14 (20 V ) ø 14 (24 V D) 2 11 41,5 6 84 7 150 428 0 14 441 min. 10 175 99 FLR Door closer S 99 S FLRK 99 S 99 GSREMR S 9 GSREMR/G RMZ Examples: S nticlockwiseclosing 9 EMR (ISO S6/LH) 9 GSREMR door; mirrored arrangements apply to clockwiseclosing (ISO 5/RH) doors max. 10 150 428 59,5 210 127 40 5 min. 10 1 2 4 5 71 0 52 42 16 65 110 24V D 120 72 4,5 78 4 171 142 160 200 Ø 10 (24 V D) Ø 12 (20 V ) 2 Door closer S 99 FLRK Examples: nticlockwiseclosing (ISO 6/LH) door; mirrored arrangements apply to clockwiseclosing (ISO 5/RH) doors DORM 5
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER S 99 FL PPLIION ON DOULE DOORS he modular S 9 GSR system also enables the use of the S 99 FL EN 25 on the active leaf of double doors. s the door is opened, the freeswing function is activated from an opening angle of > 0 at the active leaf. he door remains freely operable and is not automatically closed, which facilitates access in doors located in heavily frequented areas. he GSR system ensures the closure of double doors in the correct sequence: first the inactive leaf then the active leaf. he system operates independently of the door closer hydraulics using a push rod clamping arrangement with protective overload release. he door release/closer activator mechanism is integrated in the slide channel. S 99 FL GSR Door coordinator with freeswinging active leaf S 99 FL GSREMF 1 Door coordinator with freeswinging active leaf and electromechanical holdopen of the inactive leaf he GSR system ensures the closure of double doors in the correct sequence: first the inactive leaf then the active leaf. he GSREMF 1 system ensures the closure of double doors in the correct sequence: first the inactive leaf then the active leaf. It also facilitates the combined holdopen of both door leaves. he inactive leaf can be held at an angle between 80 and 10, and the active leaf is held open at any angle up to max. 150 by the door coordinator. detectors (e.g. DORM RMZ in the ontur design). DORM units can also be connected as a second and third detector. With adjustable pulloff force (no tools required), the holdopen can also be readily released by hand. 4 4 84 142 4 S 9 160 470 In the event of an alarm or power failure, the holdopen is released and the door coordinator ensures that the door leaves close in the correct sequence. he release signal is emitted by external smoke Note he holdopen point of the inactive leaf is always located at the maximum door opening angle install a door stop at this position. S 99 FL GSREMR 1 Door coordinator with freeswinging active leaf, electromechanical holdopen of the inactive leaf and integral smoke detector he GSREMR 1 system ensures the closure of double doors in the correct sequence: first the inactive leaf then the active leaf. It also facilitates the combined holdopen of both door leaves. he inactive leaf can be held at an angle between 80 and 10, and the active leaf is held open at any angle up to max. 150 by the door coordinator. In the event of an alarm or power failure, the holdopen is released and the door coordinator ensures that the door leaves close in the correct sequence. Holdopen release is initiated by the GSREMR via a smoke detector integrated in the door coordinator. DORM units can also be connected as a second and third detector. With adjustable pulloff force (no tools required), the holdopen can also be readily released by hand. Note he holdopen point of the inactive leaf is always located at the maximum door opening angle install a door stop at this position. he smoke detector unit has to be replaced after 8 years according to DIN 14677. Having reached the replacement time, a lightemitting diode will light continuously. 4 4 84 142 4 S 9 160 470 6 DORM
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER Ø8 (24 V D) 115 470 4 S 99 FL 78 120 110 150 2500 160 142 24 V D Inactive leaf Minimum width 70 mm in the case of unequal leaves ctive leaf 250 444 470 4 1 95 Ø10 (20 V ) 2,5 2,5 Ø8 (24 V D) S 99 FL 78 120 110 17002500 160 142 24 V D Inactive leaf ctive leaf DORM 7
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER S 99 FL PPLIION EXMPLES HOLDOPEN SYSEM S 99 FL RMZ 2x 2 x 121 KΩ 2 x 121 KΩ 20 V RMZ 1 2 4 1 2 4 S 99 FL 12 1110 2 14 7 8 9 16 1 4 H H Junction box Fuse 10 S 99 FL 121 KΩ N RMZ PE L 20 V ± 10% Recommended cabling: I Y (St) Y 2 x 2 x 0.6 S 99 FLR 2x 2 x 121 KΩ 2 x 121 KΩ 2 x 121 KΩ S 99 FLR 20 V S 99 FLR 12 1110 2 14 1 2 4 1 2 4 1 2 4 1 2 12 1110 2 14 H H 7 8 9 16 1 4 7 8 9 16 1 4 12 4 1 12 4 1 H 121 KΩ N PE S 99 FLR L Junction box Fuse H 10 121 KΩ 20 V ± N10% PE L S 99 FLR Junction box Fuse 10 20 V ± 10% Recommended cabling: I Y (St) Y 2 x 2 x 0.6 8 DORM
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER S 99 FLRK 2x 2 x 121 KΩ 2 x 121 KΩ 20 V 1 2 4 1 2 4 S 99 FLRK 12 1110 2 14 7 8 9 16 1 4 H H Junction box Fuse 10 121 KΩ N PE S 99 FLRK L 20 V ± 10% Recommended cabling: I Y (St) Y 2 x 2 x 0.6 S 99 FL GSREMR 1 2x 2 x 121 KΩ 2 x 121 KΩ 2 x 121 KΩ MN GSREMR 20 V GSREMR 20 V 12 11 10 2 14 12 11 10 2 14 1 2 4 1 2 4 1 2 4 S 9 S 99 FL S 9 Inactive leaf ctive leaf Inactive leaf 7 8 9 16 1 4 7 8 9 16 1 4 H H H 121 KΩ N PE L S 9 GSREMR Junction box Fuse by H others 10 121 KΩ 20 V N PE ± 10% L S 9 GSREMR Junction box Fuse 10 20 V ± 10% Recommended cabling: I Y (St) Y 2 x 2 x 0.6 DORM 9
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER SMOKE DEEORS he RMZ in the ontur design and smoke detectors provide the ideal complement to the S 99 FL system for passive/ preventive fire protection. hey are designed in accordance with the latest codes issued by RMZ he RMZ smoke detector in the ontur design provides a 24 V D supply for all the holdopen devices connected to it. In the event of an alarm or power failure, it deenergizes the devices (release function). It has an automatic reset which can be switched to manual mode if required. floating (novolt) changeover contact and connections for both further detectors and for an external manual release device are also provided. min. 10 78 57,5 the German Institute for uilding echnology and ensure perfect interaction between all the devices employed for holdingopen fire and smoke check doors whatever the situation. he unit is available in the RMZ version with a stabilised power pack, or in the RMZ DW version without a power pack for integration in building management and control systems via a DW bus and the DORM MS door management system. he smoke detector unit has to be replaced after 8 years according to DIN 14677. Having reached the replacement time, a lightemitting diode will light continuously. 4 0 Data and features RMZ Functions Smoke detector Release device Power supply unit Smoke detection Scattered light principle (optical sensor) Fixing Lintel or transommounted eilingmounted onnection of other detectors otal installed load (max.) for holdopen device and other detectors in W 9.8 Power consumption of internal detectors in W 1.2 0.65 LED indicators Input voltage larm Standby Maintenance due ontaminated 20 V ± 10 % 24 V D 15%, 10% Output voltage 24 V D Detector operating voltage 24 V D 24 V D 15%, 10% Input current (max.) in m 75 20 Floating (novolt) changeover contact Safety extra low voltage (SELV) Reset utomatic an be changed to manual reset 1) 24 V /D 1 0 V /D 1 Functional check Smoke detection onnection terminals for external manual release Degree of protection IP 0 IP 4 mbient temperature in 20, 40 10, 60 Weight in kg 0.25 0.15 Dimensions in mm Length Overall depth Height 79 4 0 ø 100 44 ompliant with EN 54 Part 7 mark for building products yes no 1) Required in connection with S 99 FL and IS 96 FL he smoke detector ensures the early detection both of smouldering fires and open fires with smoke evolution. It can be connected to all DORM holdopen systems. 44 Ø 100 F pproval certification RMZ in the ontur design and smoke detectors have been granted general building approval by the German Institute for uilding echnology, erlin; acceptance inspection mandatory in Germany. 10 DORM
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER HOLDOPEN SYSEMS REGULIONS/INFORMION he use of holdopen systems is subject to special regulations based on official approval requirements. hese relate in particular to the final inspection (acceptance), continuous monitoring and maintenance. he regulations and instructions provided below are intended as an aid, pursuant to statutory regulations that apply e.g. in Germany, to ensure that all participants are properly informed of the most important requirements that relate to the installation and operation of holdopen systems. Further information can be found in the following documents: Richtlinien für Feststell anlagen des Deutsches Instituts für autechnik, erlin [ode of practice relating to holdopen systems issued by the German Institute for uilding echnology, erlin] General building regula tions pertaining to the approval of the holdopen system concerned. EN 1155.. DIN EN 1467 1. General 1.1 In the case of fire doors (and similar shutters/closures/ barriers) that are held open by holdopen systems, the sweep area necessary for the closing operation must be kept constantly clear. his area must be clearly identified by lettering, floor markings or similar. Where necessary, structural measures must also be implemented to ensure that cables, leads, lines, pipes, stored/deposited goods or components (e.g. false ceilings or other overhead items/elements) are reliably prevented from falling into the sweep area. 1.2 Wherever possible, smoke detectors should be used for holdopen systems. For holdopen systems for fire doors in emergency escape routes, smoke detectors must be used. 1. Each holdopen device must also be capable of being released by hand, without adversely affecting the functional capabilities of the automatic release device. In the case of door closers with electromagnetic holdopen, the manual release may be performed by a small tug applied to the door leaf. If holding electromagnets or freeswing door closers are used, a pushbutton must be provided to facilitate manual release. he manual release push buttons employed for this purpose must be red and carry the wording lose Door or equivalent. he pushbutton must be located in the immediate vicinity of the door and must not be concealed by the door when this is held open. 2. Final inspection (acceptance) 2.1 In Germany and countries governed by DIN regulations: Following onsite installation of the operable holdopen system, its functional integrity and quality of installation must be confirmed by an acceptance inspection procedure. he acceptance inspection may only be performed by skilled personnel of manufacturers of monitoring and/or holdopen devices, skilled personnel authorized by same, or skilled personnel from an accredited inspection agency. 2.2 In Germany and countries governed by DIN regulations: Once the acceptance inspection has been successfully completed, the operator shall permanently fix on the wall in the immediate vicinity of the door, a plate supplied by the manufacturer of the holdopen system measuring 105 mm x 52 mm and carrying the inscription Holdopen system Inspected by. (company logo with month and year of acceptance inspection) or equivalent 2. he operator is to be provided with a certificate detailing the successful acceptance inspection; this certificate must be retained by the operator.. Periodic surveillance.1 he holdopen system must be kept by the operator in a constantly good operating condition, and inspected at least once a month to ensure that it is functioning properly..2 In addition, the operator is obliged at least once a year, or at shorter intervals if specified in the approval certificate, to inspect all the devices to ensure that they are operating and interacting properly and without fault, and to carry out or instigate adequate maintenance. he associated test, inspection and the maintenance work may only be performed by an expert or an appropriately trained person.. he scope, result and time of the periodic inspection are to be recorded. hese records must be retained by the operator. DORM 11
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER SNDRD EQUIPMEN ND ESSORIES S 99 FL door leaf fixing Size EN 25 S 99 FL transom fixing Size EN 25 S 99 FLR Size EN 25 Slide channel with freeswing arm assembly yy 5202xx yy 502xx yy 54290xx Slide channel with freeswing arm assembly GSR Y 64102001 GSREMF 1 Y 64112001 GSREMR 1 Y 64215001 RMZ smoke detector 648000xx Z Z Z smoke detector 6480900 packaging unit 2 pcs. Z Z Z Manual release pushbutton HUP 590151 HP 590152 Z Z Z 12 DORM
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER S 99 FLRK Size EN 25 S 99 FL door leaf fixing Size EN 25 S 9 Size EN 25 ushioned limit stay with freeswing arm assembly, without slide channel, for GSR coordinator fixed to active leaf y 580201 for GSR door coordinator fixed to inactive leaf y 4020001 580009 Z yy 54101xx Z Y 1 x y Y 1 x y Y 1 x y Y 1 x y Y 1 x y Y 1 x y Z Z 1) Z 1) Z Z Z Z Z Z 1) Not necessary in the case of the GSREMR 1 Holdopen device tested to EN 1155 (max. EN 5) RMZ smoke detector Freeswing action yy loser body complete with slide channel assembly y loser separate Y Slide channel assembly separate Z Optional accessory xx 01 11 09 04 olor Silver White (RL 9016) Special color lso available in matching Design * finishes Stainless steel S 99 FLR only available in 01 and 04 * Design relates to the surface finish of the product DORM 1
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER SPEIFIION EXS S 99 FL EN 25 Slide channel door closer compliant with EN 1154, with E mark, in the ontur design, for door widths up to 1250 mm, with electrohydraulic holdopen, compliant with EN 1155, with freeswing action from a door opening angle of > 0. losing speed and latching action adjustable. Nonhanded. Operating voltage 24 V D. pproved by the German Institute for uilding echnology, erlin, for use in a holdopen system. cceptance inspection mandatory in Germany. In transommounted arrangement, a certificate of compliance in conjunction with the relevant fire and smoke check door is mandatory. Model YYLeaffixed/pull side YYransomfixed/pull side olor YYSilver YYWhite (sim. to RL 9106) YYStainless steel Design YYSpecial color (sim. to RL) Make DORM S 99 FL S 99 FLR EN 25 Slide channel door closer compliant with EN 1154, with E mark, in the ontur design, for door widths up to 1250 mm, with electrohydraulic holdopen, compliant with EN 1155, with freeswing action from a door opening angle of > 0. losing speed and latching action adjustable. Nonhanded. dditional connections available for further detectors, external manual release device and floating (novolt) alarm contact. Power supply 20V. Operating voltage 24 V D. pproved by the German Institute for uilding echnology, erlin, for use as a holdopen system. cceptance inspection mandatory in Germany. pproval certification with the relevant fire and smoke check door mandatory. Model YYransomfixed/pull side olor YYSilver YYStainless steel Design Make DORM S 99 FLR S 99 FLRK EN 25 Slide channel door closer compliant with EN 1154, with E mark, in the ontur design, for door widths up to 1250 mm, with electrohydraulic holdopen, compliant with EN 1155, with freeswing action from a door opening angle of > 0. losing speed and latching action adjustable. Nonhanded. Slide channel with integral power pack and smoke detector, with standby and maintenance due indicators. Overall height 0 mm. dditional connections available for further detectors, external manual release device and floating (novolt) alarm contact. Power supply 20V. Operating voltage 24 V D. pproved by the German Institute for uilding echnology, erlin, for use as a holdopen system. cceptance inspection mandatory in Germany. Model YYLeaffixed/pull side olor YYSilver YYWhite (sim. to RL 9106) YYStainless steel Design YYSpecial color (sim. to RL) Make DORM S 99 FLRK RMZ Smoke detector in the ontur design, with standby and maintenance due indicators, integral power pack and optical smoke sensor for transom/lintel fixing. For release activation of DORM holdopen devices. floating (novolt) alarm contact and connections for further detectors and external manual release devices are provided. an be switched to manual reset. Onepiece cover. Overall height 0 mm. General building approval granted by DIt, erlin, for use in a holdopen system. cceptance inspection of the system is mandatory in Germany. Model YYRMZ with integrated power pack. Power supply 20 V Operating voltage 24 V D. YYRMZ DW Smoke detector without power pack for connection to DW bus. YYOptional integral alarm module adding an audible signal to the visual indicator. olor YYSilver YYWhite (sim. to RL 9106) YYStainless steel Design YYSpecial color (sim. to RL) Make DORM RMZ DORM RMZ DW Optical smoke detector, 24 V D, for ceiling fixing. For use as second and third triggering detector on all DORM holdopen systems. With floating (novolt) changeover contact. General building approval granted by DIt, erlin and the VdS, ologne; compliant to EN 54, Part 7. cceptance inspection mandatory in Germany. olor Y White (sim. to RL 900) Make DORM 14 DORM
S 99 FL/FLR FREESWING SLIDE HNNEL DOOR LOSER S 99 FL GSR EN 25 Slide channel door closer on the active leaf, compliant with EN 1154, with E mark, in the ontur design, for door widths up to 1250 mm, with electrohydraulic holdopen, compliant with EN 1155, and with a freeswing function from a door opening angle of > 0. losing speed and latching action adjustable. Nonhanded. Operating voltage 24 V D. Slide channel with integral mechanical door coordinator, compliant with EN 1158. his system operates independently of the door closer hydraulics using a push rod clamping system with a protective overload release and onepiece cover. Overall height 0 mm. Nonhanded. amaction door closer on the inactive leaf: S 9 EN 25. pproved by the German Institute for uilding echnology, erlin, for use in a holdopen system. cceptance inspection mandatory in Germany. Model YYLeaffixed/pull side (S 99 FL on active leaf, S 9 on inactive leaf) olor YYSilver YYWhite (sim. to RL 9106) YYStainless steel Design YYSpecial color (sim. to RL) Make DORM S 99 FL GSR S 99 FL GSREMF 1 EN 25 Slide channel door closer on the active leaf, compliant with EN 1154, with E mark, in the ontur design, for door widths up to 1250 mm, with electrohydraulic holdopen, compliant with EN 1155, and with a freeswing function from a door opening angle of > 0. losing speed and latching action adjustable. Nonhanded. Operating voltage 24 V D. Slide channel with integral mechanical door coordinator, compliant with EN 1158. Electromechanical holdopen, 24 V D, compliant with EN 1155. Holdopen point 80 10 and pulloff force adjustable. his system operates independently of the door closer hydraulics using a push rod clamping system with a protective overload release and onepiece cover. Overall height 0 mm. Nonhanded. amaction door closer on the inactive leaf: S 9 EN 25. pproved by the German Institute for uilding echnology, erlin, for use in a holdopen system. cceptance inspection mandatory in Germany. Model YYLeaffixed/pull side (S 99 FL on active leaf, S 9 on inactive leaf) olor YYSilver YYWhite (sim. to RL 9106) YYStainless steel Design YYSpecial color (sim. to RL) Make DORM S 99 FL GSREMF 1 S 99 FL GSREMR 1 EN 25 Slide channel door closer on the active leaf, compliant with EN 1154, with E mark, in the ontur design, for door widths up to 1250 mm, with electrohydraulic holdopen, compliant with EN 1155, and with a freeswing function from a door opening angle of > 0. losing speed and latching action adjustable. Nonhanded. Operating voltage 24 V D. Smoke detector with standby and maintenance due indicators fully integrated in the housing of the door coordinator. dditional connections available for further detectors, external manual release device and floating (novolt) alarm contact. Power supply 20V. Operating voltage 24 V D. Slide channel with integral mechanical door coordinator, compliant with EN 1158. Electromechanical holdopen, 24 V D, compliant with EN 1155. Holdopen point 80 10 and pulloff force adjustable. his system operates independently of the door closer hydraulics using a push rod clamping system with a protective overload release and onepiece cover. Overall height 0 mm. Nonhanded. amaction door closer on the inactive leaf: S 9 EN 25. pproved by the German Institute for uilding echnology, erlin, for use as a holdopen system. cceptance inspection mandatory in Germany. Model YYLeaffixed/pull side (S 99 FL on active leaf, S 9 on inactive leaf) olor YYSilver YYWhite (sim. to RL 9106) YYStainless steel Design YYSpecial color (sim. to RL) Make DORM S 99 FL GSREMR 1 DORM 15
DORM Deutschland GmbH DORM Platz 1 58256 EnnEPEtl GERMny Phone 49 2 790 Fax 49 2 794950 www.dorma.com WN 05 811 5152, 09/15, S 99 FL/FLR, G, x. XX. xx/15 Subject to change without notice