Take a fresh breath with us...
Nikhil Medico Equipments Introduction 21 years of legacy in Healthcare industry.. Our business area incorporates all the health care equipment solutions like 1. Modular Operation Theatre 2. Central Gas Management System 3. Liquid Oxygen Tank Installation 4. Ceiling units 5. Bed Head Panels 6. Control Panels 7. Other Accessories Nikhil Medico Equipments established at Nasik, Maharashtra has a business legacy of about 21 years in the field of Healthcare Industry. The company has made it to success at this stage with the Engineering indignity of Mr. Anil Shete (B.E Chemical)
The company has grown its market hold all over these years in the following Business Areas- 1. Supply and installation of Central Gas Pipeline System. 2. Installation of Modular Operation Theatres. 3. Complete trunkey solutions for hospitals including ceiling mounted pendants, digital control panels, bed head panels, trunking systems for ICUs, HVAC systems & epoxy/vinyl flooring. Over the years these business areas have been quite developed and leading to continuous improvement in the best possible way.
The Central Gas Management System include- 1. Central Oxygen System. 2. Central Nitrous Oxide System. 3. Central Compressed Air System-Surgical Air. 4. Central Compressed Air System-Medical Air. 5. Central Carbon Dioxide System. 6. Central Vacuum/Suction System. 7. AGSS- Anesthetic Gas Scavenging System. 8. Liquid Medical Oxygen Tank Installation. The company has done installation of central gas management system in various government medical colleges and government institutions such as- 1. Dr. V. M. Govt. Medical College, Solapur. 2. Govt. Medical College, Aurangabad. 3. Govt. Medical College, Miraj. 4. Govt. Medical College, Dhule. 5. Civil Hospital, Nandurbar. 6. Govt. Medical College, Nagpur. 7. Nashik Municipal Corporation-Bytco Hospital, Nashik. 8. Nashik Municipal Corporation-Zhakhir Hussein Hospital, Nashik. 9. Indian Security Press Hospital, Nashik. Similarly, some of the important installations of the Central Gas Management System in the private sector include- 1.Yash Birla Group-Sujata Birla Memorial Hospital, Nashik. 2.Deenanath Mangeshkar Hospital, Pune. 3.Manipal Group of Hospitals-Manipal Hospital, Goa. 4.Sahyadri Group of Hospitals-Sahyadri Hospital, Nashik. 5.KLE Society-KLE Hospital & Medical College, Belgaum. 6.MVP Samaj-Dr. Vasantrao Pawar Medical College, Nashik. 7.S.S.Hospital, Bangalore. 8.BLDE University Hospital,Bijapur. 9.KLE Society Hospital, Belgaum. 10.Nijlingappa Hospital, Bagalkot. Many more in line with classes as more than 500 bedded hospitals, 300 bedded & 100 bedded hospitals. Some installations include turnkey projects of installation of Liquid Medical Oxygen Tank along with supply of Liquid Medical Oxygen on contract basis for a period of 10 years.
Nikhil Medico Company Profile Nikhil Medico Gases is been in the installation of Medical Gas Pipeline system from last 21 years and they have completed Installations in 11 Government as well as Private Medical College which includes Government Medical College at Solapur, Aurangabad, Latur, Miraj and recently in Nagpur. Nikhil Medico Gases not only have worked in Government field but also in Private Hospitals like Wockhardt Hospital, Sahyadri Hospital, Manipal Hospital and many more. Nikhil Medico has completed installations in the range on 50 bedded hospitals to 1000 bedded hospitals with the help of their trained and disciplined staff. Nikhil Medico has recently joined hands with GCE, India where we will work together and complete all the Medical Gas Pipeline Installations under their supervision. Healthcare is at the heart of what we do at the GCE Group. We are committed to the manufacturing of high quality and innovative medical gas equipment and associated accessories. Our teams of experts are dedicated to providing leading solutions for our customers. We work closely with healthcare professionals around the world, supporting them to care for the patients. GCE Healthcare products range from medical gas regulators, oxygen concentrators to resuscitation and hospital ward equipment used in emergency, hospital and homecare environments. GCE products are manufactured and they comply with HTM 02-01 Standard and with European Pharmacopeia and also all the products are CE Certified. GCE Healthcare products range from medical gas regulators, oxygen concentrators to resuscitation and hospital ward equipment used in emergency, hospital and homecare environments
Nikhil Medico s Product Range: Centralized Medical Gas Pipeline System (MGPS) Standards for Copper Fittings Designed to meet the requirements of EN 1254: Specification for Capillary Copper Fittings. BS 684: Specification for Copper Fittings used with Copper Tubes ASTM B280: Cleanliness Testing HTM 02-01: NHS Health Technical Memorandum BS EN 7396:Medical Gas Pipelines for Compressed Medical Gases and Vacuum BS EN 740: Active Anesthetic Gas Scavenging Pipeline System Standards for Medical Copper Tube All copper tubes from size 12 mm through 108 mm are engraved/ ink marked with te following information EN 13348, nominal dimensions, manufacturer details, part NoBS EN 13348. All Copper Pipes are Lloyd Certified with necessary Lloyd Certifications.
We Offer Provision for All Medical Gases with High Efficiency Medical Gas Pipeline System. MGPS Used For Various Medical Gases like Oxygen, Medical Vacuum, Medical Air (4bar), Surgical Air (7 Bar), Nitrous Oxide, CO2 & AGSS. This Medical Gas Pipeline Transfers All Medical Gases From The Source To End Use At Hospitals. We Use High Quality Medical Grade Copper Pipes & Fittings for the MGPS. 1. Isolation Valve: To meet safety requirements, the gas supply to operating rooms etc must be fitted with a device to allow instant shut off. To allow maintenance the gas supply must be controlled by section. To achieve the demands of safety and maintenance, shut-off valves should be fitted in every main line, riser and branch line in the pipe work system. The valves are degreased and blown clean. They can be equipped with unions to be soldered to the copper piping. Before delivery each valve is individually leak tested. The ball is sealed with washer of PTFE. The stem is sealed with two silicon O rings or PTFE washer. The valve housings are sealed with an EPDM quality O ring. Technical Data Designed to meet the requirement of Complies with Medical Devices Directive 93/42/EEC
Complies with EN ISO 7396-1 (Central Gas Supply System) Complies with EN 331 (Manually operated ball valves) HTM 02-01: Health Technical Memorandum Medical Gas Pipeline Systems 2. Gas Outlets Standards for Gas outlets: BAM, BSI, Norske Veritas, US Dot, UL, CEN, DIN, SIS Medical terminal units provide quick and easy connection of hospital ward gas equipment to the hospital gas source. The type of medical gasoutlets is decided by national standards in each country and sometimes from local requests in each hospital. GCE complies with ISO 7396 and national installation standards with secure products where every product is fully tested in production. Our Medical gas outlets are in accordance with ISO EN 9170-1, ISO EN 9170-2 international standards. Wall housing is compatible with all GCE MediUnit standards like DIN, BSI, SS, CZ All functional components are from brass Simple installation Fast connection and disconnection Designed for medical environment, Small size and Easy to clean Complies with colour coding and description by standard Technical Specifications - Standards Complies with Medical Devices Directive 93/42/EEC (CE0086) Class IIb Complies with EN ISO 7396-1 (Central Gas Supply Systems)
Complies with EN ISO 9170-1 (Terminal units) Complies with EN ISO 9170-2 (Terminal units for AGSS) Complies with DIN 13260-2 Part 2: Dimensions and allocations of Probes and Gas specific connection points for Terminal Units. 3. Area Valve Service Unit: For safety and service reasons a central gas system must be equipped with shut off valves placed so that the gas supply can easily be interrupted. The valves are mounted in a box. The emergency shut-off valve box is delivered with connection tubes and each box has been test pressurized and leakage tested. The emergency shut-off valve has large ergonomical handles. If mounted in a recessed way, the emergency shut-off valve box fits walls with 70 mm beam. With a 90 mm beam there is extra space (23,5 mm) behind the valve box usable for e.g. fire isolation. All models, also with four or five gases, fits between the beams in a CC-60 wall. The box is gas-tight which prevents gas accumulation inside the wall. The product is CE marked according to EN ISO 7396-1.It is important that the boxes are placed so that they are easily available for authorized personnel. Technical details:
Standards Complies with Medical Devices Directive 93/42/EEC Complies with EN ISO 7396-1 Fully Compliant present SIS HB 370 and HTM 02-01 4. Area Alarm The alarms are summation alarms for both high and low pressure. In addition to this, a failure in the computer communication system, or a damaged signal cable (for example: cut off ) is also indicated. The loudness of the sound can be adjusted by using the potentiometer placed behind the covering lid. At delivery the sound is set at medium. The gas alarm G4 is available in two different designs, for recessed mounting and for exposed mounting. The display will show any of eight languages chosen from stickers enclosed. The alarm is equipped with are chargeable battery in case of power failure. Technical Data Standards Complies with Medical Devices Directive 93/42/EEC Complies with EN ISO 7396-1 (Central Gas Supply Systems)
EMC tested in accordance EN 60601-1-2 (Emission and immunity) 5. Medical and Surgical Compressed Air Plant We Supply High efficiency Medical Air 4bar and Surgical Air 7 bar with Medical Grade Air Compressors It consists of 4 Parts Air Pump with motor Automatic Switch Assembly Air Reservoir with Auto Drain Inter Connection Piping Air Dryer, Desiccant Dryers, Filters Compressed Air created is stored in the Airs Reservoir which is connected to the piping network. All the time Air is maintained around 6 kg/cm2 to 9 kg/cm2. Now depending on the requirement in the hospital when the air pressure comes down to the lower Limit, the Air Pump automatically starts and when the higher limit attained in the air reservoir the motor automatically disconnects. Specific benefit Includes Fully complies to HTM 02-01, HTM 2022, C11, BS EN 7396, CE 0086 Class IIb CE Marked under Medical Device Directive 93/42/EEC Control and highly visible indication panel
Anti vibration mounts on all compressors. 6. Medical Vacuum Plant We provide the vacuum needs of the hospital with the help of high quality medical Vacuum Pumps. It consists of following parts- Air Cooled Vacuum Pump with motor Vacuum Storage Vessel Interconnecting Pipeline Bacterial Filters Vacuum Tank is maintained around 450 to 600 mm of HG. Automatic on off System is used for Vacuum Pump. After certain set value of Vacuum in the storage tank vacuum pump is automatically cut off. Specific benefits include- Fully complies to HTM 02-01, HTM 2022, C11, BSEN 7396 CE Marked under Medical Device Directive 93/42/EEC Anti Vibration mounts on all pumps All interconnecting pipe work is included.
7. AGSS Plant AGSS System provides centralized and dedicated source for the safe removal of exhaled anaesthetic gases from within the theatre, available in simplex and duplex pump configurations dependant on individual requirement. Specific benefit include Accessible easy installation Digital control Panel indicates pipeline pressure Adjustable from outside and can be placed on either side of unit Easy to read digital display indicates pipeline pressure Designed with minimal pressure drop for better plant performance Easy to maintain and prevents large dust particles from entering the pump. Designed to meet the requirement of HTM 02-01: Medical Gas Pipeline Systems BS EN 6834 : Specification for Active Anesthetic Gas Scavenging Systems ISO 7396-2: Anaesthetic Gas Scavenging Disposal Systems
8. Medical Gas Manifold: All accessories are designed and manufactured according to the relevant standard for high pressure systems. The high pressure pipe components are manufactured in the following materials: stainless steel AISI 316 L and brass CuZn39Pb3, and they are tested at 360 bar. Cylinder holders for cylinders and connecting pipes are manufactured in AISI 316. Designed to meet the requirement of Complies with Medical Devices Directive 93/42/EEC Complies with EN ISO 7396-1 (Central Gas Supply Systems) Complies with EN ISO 21969 (High Pressure Flexible Connection)
9. Control Panel The MC80 gas manifold is suitable for medium to large sized hospital. It has a flow capacity up to 200 m3/h and is conveniently designed in modules. The MC80 reduces the gas pressure in two steps to a constant distribution pressure. Service and tests can be carried out with no disturbance in the supply of gas to the gas distribution system. Fully Automatic Control Panel Semi Automatic Control Panel Designed to meet the requirement of Complies with Medical Devices Directive 93/42/EEC Complies with EN ISO 7396-1 (Central Gas Supply Systems) Complies with EN 60601-1-2 (Electromagnetic compatibility) present SIS HB 370 and HTM 02-01
10. BPC Flow meter with Humidifier Bottle: Flat surface float allows easy and safe reading of flow values by the users Ergonomic design, easy for cleaning Soft closing mechanism Resistant float against impact New scale - better reading of flow values. Compatible with following standards Complies with medical devices directive 93/42/EEC. Complies with EN 15 002
11. Vacuum Jar with Regulator: The suction level of the MediEvac+ is regulated via an easy accessible, front mounted control knob A special feature of the MediEvac+ on-off valve is easy resumption of the selected de-pressure value, whenthe treatment is interrupted The MediEvac+ gauge can easily be rotated, allowing the vacuum pressure to be clearly viewed by theoperator The gauge scale is colour coded in sections to display a clear indication of suction level Three versions of adjustable pressures are available to cover all therapy needs (-250, -600 and 1000 mbar) Compatible with following standards Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO 10079-3 (Medical suction Equipment Part 3: Suction equipment powered from a vacuum or pressure source).
12. Master Alarm The purpose with alarm systems is to inform hospital personal about none standard pressure deviation in the hospital medical gas systems. It ensures that downtime, pressure changes, etc. will be indicated and personal are informed in order to act according to hospital instructions. The gas alarm GCE TOUCH is an alarm that has all necessary functions for an early detection of these problems.gce TOUCH is very easy to operate with its clear and straight forward menu layout. It is a user-friendly alarmbased on a 7" LCD touch screen display with graphic buttons, simple control and with lots of extra functionality. Technical Data Compatible with following Standards Complies with Medical Devices Directive 93/42/EEC.
13. Theatre Suction Unit This suction unit system allows to connect to the terminal units fitted on the trolley head one or two vacuum regulators, preferably completed with the relative safety jar. The slide bracket system on the stand allows accommodating up to 4 supports for the collection containers of suctioned fluids, disposable or not. The trolley head fits also the catheter container support rings, one for each suction circuit. This to allow the operator to safely store the patient tube after use. The trolley unit fits five antistatic rotating castors, two of which with locking pedal, this to get always an easy, safe and rational positioning. Compatible with following standards Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO 10079-3 (Medical suction Equipment Part 3: Suction equipment powered from a vacuum or pressure source).
14. Bed Head Panel We Offer Various Types Of Bad Head Panels As Per Hospital Standards Includes Vertical Bed Head Panels As Well As Horizontal Bed Head Panels. We Provide Bed Head Panels In Aluminum With Duly Powder Coated With Various Colors As Per Customers Choice. Bed Head Panels Has Provision Of Gas Outlets, Electrical Sockets, & Nurse Call System. We Also Provide Railing To The Bed Head Panels To Attach Accessories Like Infusion Pump, I.V Bottle, Basket, and Examination Lamp. Compatible with Standards EN ISO 11197:2009 Medical Supply Units EN 737-1:1998 Medical gas pipeline Systems EN ISO 7396_1:2007 Medical gas pipeline systems HTM 2022 Medical gas pipeline systems HTM 02-01 Medical gas pipeline systems
15. Medical Pendants Ceiling Mounted Pendants Used For The Icu's & Operation Theaters. It Has Various Types Types Like Vertical Fixed Pendants, Single Arm Pendants & Double Arm Pendants. Gas Outlets Of Pendants Are Connected To The Gas Pipeline By The Hose Pipe. Pendants Are Available In Aluminum Extrusion With Duly Powder Coated. Pendants Has Facility For Gas Outlets, Monitor Tray, I.v. Stand, Electrical Switches & Basket.
Liquid Oxygen Tank installation LMOX tank installation with vaporiser and complete spool system Liquid Medical Oxygen supply as Tri-party agreement solutions.
Area Valve Service Unit (valve Box) Bpc Flow Meter With Humidifier Bottle. Isolation Ball Valves 2 Introduction 18 years of legacy in Healthcare industry.. Our business area incorporates all the health care equipment solutions like 1. Modular Operation Theatre 2. Central Gas Management System 3. Liquid Oxygen Tank Installation 4. Ceiling Ward units Vacuum Units. 5. Bed Head Panels 7. Control Panels 6. Other Accessories Plastic Saddle Suction Trolley. Pigtails. Nikhil Medico Gases established at Nashik, Maharashtra has a business legacy of about 18 years in the field of Healthcare Industry. The company has made it to success at this stage with the Engineering indignity of Mr. Anil Shete (B.E. Chemical). The company has grown its market hold all over these years in the following Business Areas- Hose Pipe 1. Supply and installation of Central Gas Pipeline System. F A Valve 2. Installation of Modular Operation Theatres. B. Accessories:- 3. Complete trunkey solutions for hospitals including ceiling mounted pendants, digital control pa nels, bed head 1) panels, Area trunking Valve Service systems Unit for ICUs, (valve HVAC Box) systems & 6) epoxy/vinyl Suction flooring. Trolley. 2) BPC Flow Meter With Humidifier Bottle. 7) Pigtails. 3) Over Isolation the years these Ball Valves business areas have been quite 8) developed Hose and Pipe leading to continuous 4) improvement Ward Vacuum in the best Units. possible way. 9) Copper Fittings. 5) Plastic Saddle 10) F A Valv
Our references.. and many more.still counting. The Central Gas Management System include- 1. Central Oxygen System. 2. Central Nitrous Oxide System. 3. Central Compressed Air System-Surgical Air. 3 4. Central Compressed Air System-Medical Air. 5. Central Carbon Dioxide System. 6. Central Vacuum/Suction System. 7. AGSS- Anesthetic Gas Scavenging System. Our strategic partners & suppliers. 8. Liquid Medical Oxygen Tank Installation. The company has done installation of central gas management system in various government medical colleges and government institutions such as- 1. Dr. V. M. Govt. Medical College, Solapur. 2. Govt. Medical College, Aurangabad. 3. Govt. Medical College, Miraj. 4. Govt. Medical College, Dhule. 5. Civil Hospital, Nandurbar. 6. Govt. Medical College, Nagpur. 7. Nashik Municipal Corporation-Bytco Hospital, Nashik. Standards that we are associated with.. 8. Nashik Municipal Corporation-Zhakhir Hussein Hospital, Nashik. 9. Indian Security Press Hospital, Nashik. Similarly, some of the important installations of the Central Gas Management System in the private sector include- 1. Yash Birla Group-Sujata Birla Memorial Hospital, Nashik. 2. Deenanath Mangeshkar Hospital, Pune. 3. Manipal Group of Hospitals-Manipal Hospital, Goa. 4. Sahyadri Group of Hospitals-Sahyadri Hospital, Nashik. 5. KLE Society-KLE Hospital & Medical College, Belgaum. 6. MVP Samaj-Dr. Vasantrao Pawar Medical College, Nashik. 7. S.S.Hospital, Bangalore. 8. BLDE University Hospital,Bijapur. 9. KLE Society Hospital, Belgaum. 10. Nijlingappa Hospital, Bagalkot. Many more in line with classes as more than 500 bedded hospitals, 300 bedded & 100 bedded hospitals. Some installations include trunkey projects of installation of Liquid Medical Oxygen Tank along with supply of Liquid Medical Oxygen on contract basis for a period of 10 years.
NIKHIL MEDICO EQUIPMENTS Regd. Office : 6, Hill-Top, Apt., Mahatma Nagar, Nashik, Maharashtra. (India) Works: B-254, Malegaon M.I.D.C., Sinnar, Nashik. Maharashtra. (India) Tel.: + 91-253 -2355703 Email : sales@nikhilmedico.com Website : www.nikhilmedico.com