ARMSTRONG INTERSECTION DOWNLIGHTING KIT

Sliver Connect Downlight C4SSD-CT FOR USE WITH ARMSTRONG 4 INTERSECTION DOWNLIGHTING KITS SLIVER CONNECT DOWNLIGHT ARMSTRONG INTERSECTION DOWNLIGHTING KIT High Profile Yoke Cross Tee Connection Clips (2) Hanger Wire or CBS Clip for NYC Downlight Suspension Frame Directional Cross Tee (4) usailighting.com/connect armstrongceilings.com/downlight and Armstrong Ceiling Solutions have partnered to offer architects and designers a new way to seamlessly integrate recessed downlights with architectural suspension systems. For the first time, downlights can be placed at the intersection of the ceiling grid allowing for perfect alignment of lighting and architecture. FEATURES Designers specify completely custom configurable or standard Armstrong Intersection Downlighting kits and Calla notched ceiling panels Contractors receive pre-cut factory finished panels for consistent fit and finish and easy installation Connect simply snaps into place after installation of Armstrong grid; no field painting or modification Industry leading illumination and craftsmanship Full family of downlight, adjustable, and wall wash light fixtures Seismically tested for use in D, E, F areas SLIVER CONNECT DOWNLIGHT PERFORMANCE COLOR CHOICES Classic White Warm Glow Dimming DELIVERED* PERFORMANCE: 9W BAFFLE BAFFLE 15W BAFFLE BAFFLE 16W BAFFLE BAFFLE Source Lumens: 1100 1100 1600 1600 900 900 Lumens Per Watt: 91 84 91 83 45 43 Delivered Lumens: 850 775 1250 1150 725 675 *Performance data based on 3000K, 80+ CRI CORRELATED COLOR TEMPERATURE 2700K Classic White 3000K 3500K 4000K 2700K Warm Glow Dimming 3000K Color Rendering Index: 80+ 90+ 80+ 90+ 80+ 90+ 80+ 80+ 90+ 80+ 90+ Multiplier for Lumen Output: 0.93 0.81 1.00 0.87 1.07 0.87 1.07 0.94 0.67 1.00 0.70 LIGHTING COLLABORATORY 13 Crosby Street New York, NY 10013 845-234-4090 showroom@usailighting.com LIGHTING HEADQUARTERS T: 845 565 8500 2017., LLC. Covered by US Patents: 8,581,520, 8,456,109, 8,742,695 and 10,082,279. Patents pending., Beve, Color Select, Color Harmony and Warm Glow are registered trademarks of, LLC Revised 09/12/20

Sliver Connect Downlight C4SSD-CT FOR USE WITH ARMSTRONG 4 INTERSECTION DOWNLIGHTING KITS CONNECT TM HOUSING FROM Shown with Armstrong CBS Clip for NYC 19 3 8" 4" Clip Height Varies Alternate yoke for low plenum applications shown - Armstrong Ceilings Item#: FZD4YKLP Standard yoke from Armstrong 8 height 17 3 8" 2" 3 7 8" Weight: 5 lbs 3 3 8" Connect Housing - Shown with Emergency Battery 24 7 8" 1 1 2" Sliver CONNECT TM shown with Armstrong Intersection Downlighting Kit 4" Weight: 8 lbs Remote Emergency Test Switch (included with EM Option) SLIVER CONNECT TM DOWNLIGHT FOR INTERSECTION DOWNLIGHTING TRIM DIMENSIONS RELATED PRODUCTS BEVE CONNECT TM DOWNLIGHT FOR INTERSECTION DOWNLIGHTING 4 1 8" Downlight - C4SSD 1 3 4" Downlight - C4SBD MORE SLIVER CONNECT TM FAMILY TRIMS FOR INTERSECTION DOWNLIGHTING 1 3 4" 3 3 8" TRUE ZERO CONNECT TM DOWNLIGHT FOR INTERSECTION DOWNLIGHTING 3 3 8" Adjustable - C4SSA Wall Wash - C4SSW Downlight - C4SZD LIGHTING COLLABORATORY 13 Crosby Street New York, NY 10013 845-234-4090 showroom@usailighting.com LIGHTING HEADQUARTERS T: 845 565 8500 2017., LLC. Covered by US Patents: 8,581,520, 8,456,109, 8,742,695 and 10,082,279. Patents pending., Beve, Color Select, Color Harmony and Warm Glow are registered trademarks of, LLC Revised 09/12/20

HOW TO SPECIFY Sliver Connect Downlight C4SSD-CT FOR USE WITH ARMSTRONG 4 INTERSECTION DOWNLIGHTING KITS FAMILY COLOR CHOICES C4SSD CT Sliver Connect Downlight Housing Wattage Color Temperature Beam Lens Baffle Finish Trim Finish Voltage Dimming Driver Accessories (Optional) Classic White C4SSD Connect 4 Square Sliver Downlight CT Connect Intersection Housing 09X1 9W 15X1 15W 27KS 2700K, 80+ CRI 30KS 3000K, 80+ CRI 35KS 3500K, 80+ CRI 40KS 4000K, 80+ CRI 27KH 2700K, 90+ CRI 30KH 3000K, 90+ CRI 35KH 3500K, 90+ CRI 25 25 beam 35 35 beam 50 50 beam S Solite (provided standard) F Frosted BL Black WH White GW Global White (provided standard) ZW Blizzard White (optional) UNV 120V-277V For use with Universal Voltage 120V - 277V D2 0-10V dim, 10% (2) D4 Lutron Hi-Lume 1% 3-wire/ECO D6A Eldo 0-10V, 0.1%, logarithmic/lutron controls(2) D6B Eldo 0-10V, 0.1%, linear controls (2) EM Emergency Battery (4) EMW Emergency Battery Wet Location (4) Warm Glow Dimming 16 WG1 16W 2722KS - 2700K-2200K, 80+ CRI 3022KS - 3000K-2200K, 80+ CRI 2722KH - 2700K-2200K, 90+ CRI 3022KH - 3000K-2200K, 90+ CRI 25 25 beam 35 35 beam 50 50 beam 120V D6E Eldo 0-10V, 1%, logarithmic/lutron controls (provided standard) D6F Eldo 0-10V, 1%, linear controls D7 Eldo DALI, 0.1% (2) D8 Eldo DMX, 0.1% (2) For use with 120V only D3 Lutron Hi-Lume 1% 2-wire, 120V only D19 Phase dimming 1%, 120V only (3) 347V For use with 347V only SLIVER CONNECT SPECIFICATIONS D15 0-10V dim, 1% 347V only (1, 2, 3) 1 Not available with EM 2 Not available with 9W 3 Not available with Warm Glow 4 Not available with 347V FIELD REPLACEABLE LIGHT ENGINE is serviceable through the aperture with a Philips screwdriver. All light engines feature industry-leading color consistency. FIELD REPLACEABLE 0-10V, 100%-1% solid state electronic constant current D6E dimming driver with a high power factor provided standard and sources 2mA. Driver complies with IEEC62.41 surge protection and is serviceable from above the ceiling. Other dimming drivers optionally available. EMERGENCY Emergency lighting battery pack with remote test switch requires above ceiling access for service. IOTA ILB-CP07 provides 7W for 90 minutes: delivers ~ 600 lumens. WEIGHT Standard housing with trim weighs 5 lbs, emergency housing with trim weighs 8 lbs. Weights do not include Armstrong components or mounting hardware. LIGHTING COLLABORATORY 13 Crosby Street New York, NY 10013 845-234-4090 showroom@usailighting.com HOUSING Connect housing is fabricated of gauge steel with black finish. Thru wire junction box with 4 in 4 out knockouts installs after Armstrong Intersection ceiling tee-grid has been fully installed. MOUNTING Connect housing with integral spring clips snaps directly to Armstrong s 4 Intersection frame and tee-grid ceiling. Seismically rated with use of self-tapping screws (by others). CBS Clip mounting accessories are available from Armstrong. WARRANTY Based on IESNA LM80-2008, Sliver Connect has a 50,000 hour rated life at 70% lumen maintenance (L70). Warranty covers replacement parts for 5 years from date of shipment. LIGHTING HEADQUARTERS T: 845 565 8500 LISTINGS Dry/Damp/Wet location. UL2043 rated for use in Air Handling Plenum. NRTL/CSA-US tested to UL standards. IBEW union made. NOTES For use only with 4 Intersection Downlighting by Armstrong Ceiling Solutions. See www.armstrongceilings.com/downlight for more details. Ambient temperatures at fixture location should not exceed 40 C during normal operation. Connect is not IC-rated. Keep insulation and other combustible materials a minimum of 3 away on all sides. PHOTOMETRICS Consult factory or website for IES files. Tested in accordance with IESNA LM79. /connect 2017., LLC. Covered by US Patents: 8,581,520, 8,456,109, 8,742,695 and 10,082,279. Patents pending., Beve, Color Select, Color Harmony and Warm Glow are registered trademarks of, LLC Revised 09/12/20

Sliver Connect Downlight FOR USE WITH ARMSTRONG 4 INTERSECTION DOWNLIGHTING KITS KEY SELECTION ATTRIBUTES and architecture perfectly integrated into the ceiling to deliver your vision of symmetry Replaces inconsistent finishes and edge details with clean crisp factory finished panels and grid for a fast and easy installation Eliminates the worry of field modified panels and grid For more information and how to specify compatible Armstrong Suspension Systems go to: armstrongceilings.com/downlight COMPATIBLE 9/16 ARMSTRONG SUSPENSION SYSTEMS These pre-engineered suspension systems seamlessly integrate recessed downlights at the intersection of the ceiling grid - placing light where it has never been before. Silhouette ¼" reveal Silhouette " reveal Suprafine XL reveal Interlude XL HRC reveal Detail Detail Detail Detail APPLICATION LAYOUT EXAMPLES WITH SLIVER CONNECT TM DOWNLIGHT 2 X 2 CEILING LAYOUT WITH LIGHTS 4 ON CENTER 2 X 2 CEILING LAYOUT WITH LIGHTS 6 ON CENTER 2 X 2 CEILING LAYOUT WITH LIGHTS 8 ON CENTER KEY: Downlight Suspension Frame Yoke Main Beams Directional Cross Tee Cross Tees 4 x 4 LAYOUT CEILING HEIGHT 6 x 6 LAYOUT CEILING HEIGHT 8 x 8 LAYOUT CEILING HEIGHT LIGHT LEVELS AT: 8 10 12 14 LIGHT LEVELS AT: 8 10 12 14 LIGHT LEVELS AT: 8 10 12 14 PERSON HEIGHT (5 AFF): 73 70 68 67 PERSON HEIGHT (5 AFF): 36 34 33 32 PERSON HEIGHT (5 AFF): 20 19 WORK PLANE (2.5 AFF): 69 68 67 65 WORK PLANE (2.5 AFF): 33 33 32 31 WORK PLANE (2.5 AFF): 17 FLOOR 69 66 66 64 FLOOR 33 32 31 31 FLOOR 17 17 Perfect for showrooms, retail applications, and examination areas Ideal for open offices, private offices, conference rooms, restrooms, meeting spaces, and classrooms Excellent for corridors, lobbies, circulation spaces, and lounge areas All illuminance values are average values, measured in footcandles (fc). All measurements for Sliver Connect C4SSD, 15W, 50o beamspread. LIGHTING COLLABORATORY 13 Crosby Street New York, NY 10013 845-234-4090 showroom@usailighting.com LIGHTING HEADQUARTERS T: 845 565 8500 2017., LLC. Covered by US Patents: 8,581,520, 8,456,109, 8,742,695 and 10,082,279. Patents pending., Beve, Color Select, Color Harmony and Warm Glow are registered trademarks of, LLC Revised 09/12/20

DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D2 / DIML2 D2 / DIML2 : 0-10V Dimming Driver Wiring (Dims down to 10%) D2 / DIML2 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V / 277V Use source current per Crestron ilux dimmer expansion module CLS-EXP-DIMFLV 100% - 10% fixture specification Crestron DIN Rail dimmer DIN-4DIMFLV4 100% - 10% sheet to determine Crestron DIN Rail analog output module DIN-A08 100% - 10% number of fixtures per Crestron 8 Channel dimmer module GLX-DIMFLV8 100% - 10% dimmer. Max number Crestron 8 Channel dimmer module GLXP-DIMFLV8 100% - 10% of fixtures is limited by Leviton IllumaTech dimmer IP710-DLX 100% - 10% dimmer load rating. Lightolier (Philips) Vega V2000FAMU 100% - 10% Lutron Diva DVTV-XX 100% - 10% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIMMER: 0-10V D2 / DIML2 0-10V DIMMING W/RELAY TO SWITCH POWER 0-10V (-) 0-10V (+) GRAY V- NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. CLASS 2 CONTROL WIRES RELAY DIMMER: 0-10V w/ POWER SWITCHING D2 / DIML2 0-10V DIMMING (NO RELAY) 0-10V (-) 0-10V (+) GRAY V- NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. GROUND I2-264-2 Revised 03/22/2017

DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D3 / DIML3 D3 / DIML3 : Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / Dimming Driver Wiring (Dims down to 1%) 120V D3 / DIML3 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Dimmer* Manufacturer Product Part Number Output Range Fixture Wattage 120V Only 39W and Less 40W - 80W ETC Sensor+ Cabinet ELV10 100% - 1% 1 26 1 13 ETC Unison DRd Cabinet ELV10 100% - 1% 1 26 1 13 Lutron Maestro Wireless 600W dimmer MRF2-6ND-120-100% - 1% 1 8 1 4 Lutron Maestro Wireless 1000W dimmer MRF2-10ND-120-100% - 1% 1 13 1 6 Lutron HomeWorks QS adaptive dimmer HQRD-6NA- 100% - 1% 1 8 1 4 Lutron HomeWorks QS 600W dimmer HQRD-6ND- 100% - 1% 1 8 1 4 Lutron HomeWorks QS 1000 W dimmer HQRD-10ND- 100% - 1% 1 13 1 6 Lutron Caseta Wireless Pro 1000W dimmer PD-10NXD- 100% - 1% 1 13 1 6 Lutron Stanza dimmer SZ-6ND- 100% - 1% 1 8 1 4 Lutron RadioRA 2 adaptive dimmer RRD-6NA- 100% - 1% 1 8 1 4 Lutron RadioRA 2 1000 W dimmer RRD-10ND- 100% - 1% 1 6 1 3 Lutron myroom DIN power module MQSE-4A1-D 100% - 1% 1 6 1 3 Lutron HomeWorks QS wallbox power module HQRJ-WPM-6D-120-100% - 1% 1 26 1 13 Lutron Homeworks DIN power module LQSE-4A1-D 100% - 1% 1 6 1 3 Lutron HomeWorks wallbox power module HWI-WPM-6D-120 100% - 1% 1 26 1 13 Lutron GRAFIK Eye QS control unit QSGR-, QSGRJ- 100% - 1% 1 26 1 13 Lutron GRAFIK Eye 3000 control unit GRX-3100-, GRX-3500-100% - 1% 1 26 1 13 Lutron RPM-4U module HW-RPM-4U-120, LP-RPM-4U-120 100% - 1% 1 26 1 13 Lutron RPM-4A module HW-RPM-4A-120, LP-RPM-4A-120 100% - 1% 1 26 1 13 Lutron GP dimming panels Various 100% - 1% 1 26 1 13 Lutron Ariadni CL 250W dimmer AYCL-253P- 100%-1% 1 8 1 4 Lutron Diva CL 250W dimmer DVCL-253P-, DVSCCL-253P- 100%-1% 1 8 1 4 Lutron Grafik T CL or RF CL dimmer GT-250M-, GTJ-250M- 100%-1% 1 8 1 4 Lutron Nova T CL 250W dimmer NTCL-250-100%-1% 1 10 1 5 * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D3 / DIML3 2 WIRE PHASE DIMMING DIMMER: 2 WIRE PHASE V- GROUND ONLY FOR SWITCHES WITH I2-264-3 Revised 03/22/2017

DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D4 / DIML4 D4 / DIML4 : Lutron Hi-Lume A-Series Driver with 3-Wire FL Control / Dimming Driver Wiring (Dims down to 1%) D4 / DIML4 3-Wire Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V Only 39W and Less 40W - 80W ETC Sensor+ Cabinet D20 Dimming module 100% - 1% 1 53 1 26 ETC Unison DRd Cabinet D20F Dimming module 100% - 1% 1 53 1 26 Lutron Nova T NTF-10-100% 1% 1 41 1 20 Lutron Nova T NTF-103P- 100% 1% 1 20 1 10 Lutron Nova NF-10-100% 1% 1 41 1 20 Lutron Nova NF-103P- 100% 1% 1 20 1 10 Lutron Vareo VF-10-100% 1% 1 20 1 10 Lutron Skylark SF-10P-, SF-103P- 100% 1% 1 20 1 10 Lutron Diva DVF-103P-, DVSCF-103P- 100% 1% 1 20 1 10 Lutron Ariadni AYF-103P- 100% 1% 1 20 1 10 Lutron Vierti VTF-6A- 100% 1% 1 15 1 7 Lutron Maestro MAF-6AM-, MSCF-6AM- 100% 1% 1 15 1 7 Lutron Maestro Wireless MRF2-F6AN-DV- 100% 1% 1 15 1 7 Lutron RadioRA 2 RRD-F6AN-DV- 100% 1% 1 15 1 7 Lutron HomeWorks QS HQRD-F6AN-DV 100% 1% 1 15 1 7 Lutron Interfaces PHPM-3F-120, PHPM-3F-DV 100% 1% 1 41 1 20 Lutron GP Dimming Panels Various 100% 1% 1 41 1 20 277V Only 40W and Less 41W - 80W ETC Sensor+ Cabinet D20 Dimming module 100% - 1% 1 53 1 26 ETC Unison DRd Cabinet D20F Dimming module 100% - 1% 1 53 1 26 Lutron Nova T NTF-10-277- 100% 1% 1 44 1 22 Lutron Nova T NTF-103P-277-100% 1% 1 33 1 16 Lutron Nova NF-10-277- 100% 1% 1 44 1 22 Lutron Nova NF-103P-277-100% 1% 1 33 1 16 Lutron Skylark SF-12P-277-, SF-12P-277-3 100% 1% 1 33 1 16 Lutron Diva DVF-103P-277-, DVSCF-103P-277-100% 1% 1 33 1 16 Lutron Ariadni AYF-103P-277-100% 1% 1 44 1 22 Lutron Vierti VTF-6A- 100% 1% 1 33 1 16 Lutron Maestro MAF-6AM-277-, MSCF-6AM-277-100% 1% 1 20 1 10 Lutron Maestro Wireless MRF2-F6AN-DV- 100% 1% 1 33 1 16 Lutron RadioRA 2 RRD-F6AN-DV- 100% 1% 1 33 1 16 Lutron HomeWorks QS HQRD-F6AN-DV 100% 1% 1 33 1 16 Lutron Interfaces PHPM-3F-DV 100% 1% 1 88 1 44 Lutron GP Dimming Panels Various 100% 1% 1 88 1 44 * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML4 wiring diagrams continued on next page I2-264-4 Revised 03/22/2017

DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D4 / DIML4 Continued D4 / DIML4 : Lutron Hi-Lume A-Series Driver with 3-Wire FL Control / Dimming Driver Wiring (Dims down to 1%) GROUND DIMMER: 3 WIRE PHASE DIMMED HOT D4 / DIML4 3 WIRE PHASE DIMMING CAP UNUSED ECOSYS WIRES GRAY ORANGE V- D4 / DIML4 : Lutron Hi-Lume A-Series Driver with EcoSystem Control / Dimming Driver Wiring (Dims down to D4 / DIML4 EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 100% 1% 1 32 1 16 Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 100% 1% 1 64 1 32 Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 100% 1% 1 64 1 32 Lutron Quantum Various 100% 1% 1 64 1 32 * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. E2 E1 D4 / DIML4 EcoSystem CONTROLS ECOSYS BUS E2 E1 WALL CONTROL CAP UN-USED ORANGE WIRE GRAY ORANGE V- I2-264-4 Revised 03/22/2017

DIMMING COMPATIBILITY D6A / DIML6A and D6E / DIML6E D6B / DIML6B and D6F / DIML6F D6A / DIML6A and D6E / DIML6E Dimming Compatibility Table D6A / DIML6A and D6E / DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below) D6A / DIML6A = Eldo SOLOdrive 0-10V control dims from 100% to 0.1% D6E / DIML6E = Eldo ECOdrive 0-10V control dims from 100% to 1% D6A / DIML6A and D6E / DIML6E Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6A 6E Refer to manufacturer's Lutron Diva DVTV/NFTV with PP-20 99% - 0.1% 1% dimmer load rating for Lutron Nova T NTFTV with PP-20 99% - 0.1% 1% maximum and minimum Lutron Energi Savr Node QSN-4T16-S 100% - 0.1% 1% fixture quantities per Lutron GP Dimming Panels TVM2 Module 99% - 0.1% 1% dimmer. Lutron Interfaces GRX-TVI w/ GRX3503 100% - 0.1% 1% Enlighted compatible. Sensor Switch nio nio EZ 100% - 0.1% 1% enlighted Control Unit CU-3E-1R 100% - 0.1% 1% D6B / DIML6B and D6F / DIML6F Dimming Compatibility Table D6B / DIML6B and D6F / DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-lutron and others listed below) D6B / DIML6B = Eldo SOLOdrive 0-10V control dims from 100% to 0.1% D6F / DIML6F = Eldo ECOdrive 0-10V control dims from 100% to 1% D6B / DIML6B and D6F / DIML6F Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6B 6F Bush-Jaeger Electronic potentiometer 2112U-101 100% - 0.1% 1% Jung Electronic potentiometer 240-10 100% - 0.1% 1% Leviton Iluma Tech dimmer IP710-DLX 100% - 0.1% 1% Lightolier (Philips) Momentum (120V ONLY) ZP600FAM120 100% - 0.1% 1% Merten Electronic potentiometer 5729 100% - 0.1% 1% Pass & Seymour Titan CD4FB-W 100% - 0.1% 1% Watt Stopper Miro DCLV1 100% - 0.1% 1% Synergy Wallbox Dimmers ISD BC 100% - 0.1% 1% ABB i-bus SD/S 2.16.1 100% - 0.1% 1% Crestron Modules GLX-DIMFLV8, GLXP-DIMFLV8 100% - 0.1% 1% Crestron Green Light GLPAC-DIMFLV4-, GLPAC-DIMFLV8-100% - 0.1% 1% Crestron Green Light Power Pack GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM, GLPP-1DIMFLV3EX-PM 100% - 0.1% 1% Crestron DIN Rail Analog Output Module DIN-A08 100% - 0.1% 1% Crestron DIN Rail 0-10V Fluorescent Dimmer DIN-4DIMFLV4 100% - 0.1% 1% Crestron ilux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV 100% - 0.1% 1% enlighted Control Unit CU-3E-1R 100% - 0.1% 1% Refer to manufacturer's dimmer load rating for maximum and minimum fixture quantities per dimmer. Enlighted compatible. DIMMING WIRING SCHEMES: not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D6 / DIML6 D6 / DIML6 0-10V DIMMING W/RELAY TO SWITCH POWER 0-10V DIMMING (NO RELAY) CLASS 2 CONTROL WIRES DIMMER: 0-10V RELAY 0-10V (-) 0-10V (+) GRAY V- GROUND DIMMER: 0-10V w/ POWER SWITCHING 0-10V (-) 0-10V (+) GRAY V- DIMMER: 0-10V w/ POWER SWITCHING DIML6A, 6B 0-10V DIMMING (NO RELAY) I2-264-6 Revised 08/14/2017

DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D7 / DIML7 and D7E D7 / DIML7 and D7E Dimming Driver Wiring D7 / DIML7 and D7E are linearly programmed dimming drivers. D7 / DIML7 = Eldo SOLOdrive DALI control dims from 100% to 0.1% D7E = Eldo ECOdrive DALI control dims from 100% to 1% D7 / DIML7 / D7E DALI CONTROLS DALI BUS DA DA WALL CONTROL ORANGE (-) ORANGE/ (+) V- I2-264-7 Revised 08/14/2017

DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D8 / DIML8 and D8E D8 / DIML8 and D8E Dimming Driver Wiring D8 / DIML8 and D8E are linearly programmed dimming drivers. D8 / DIML8 = Eldo POWERdrive DMX control dims from 100% to 0.1% D8E = Eldo POWERdrive DMX control dims from 100% to 1% DMX BUS - XLR CABLE OR SHIELDED DATA CABLE The data cable used must meet the following requirements: type: shielded, 2-conductor twisted pair maximum capacitance between conductors: 30 pf/ft maximum capacitance between conductor and shield: 55 pf/ft maximum resistance: 0.02 ohms/ft normal impedance: 100-140 ohms conductive core: 24 AWG is recommended If 3-wire data cables are preferred, we suggest a Belden 9841 or equivalent cable which meets the specifications for EIA RS-485 applications. Do not use standard microphone cables: they cannot transmit DMX512 data reliably over long distances. NOTE: DMX link termination device (by others) should be used on last fixture in line on a circuit to avoid signal loss. D8 / DIML8 / D8E DMX CONTROLS DMX BUS - XLR CABLE OR SHIELDED DATA CABLE SHIELD DMX (-) DMX (+) 5 PIN XLR JACKS STANDARD 8 BIT DMX 512 CONTROLLER RED BARE V- I2-264-8 Revised 08/14/2017

DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D15 / DIML15 D15 / DIML15 : 0-10V, 347V Dimming Driver Wiring (Dims down to 1%) 347V Only D15 / DIML15 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Output Range Per Dimmer* 347 Use source current per Acuity Synergy ISD-BC 100% - 1% fixture specification Douglas WPN-5721, WPN-5822 100% - 1% sheet to determine Hubbell Light Hawk2 LHD-IRS3-N347-xx 100% - 1% number of fixtures per Leviton Illumatech IP710-DLZ with 347V relay 100% - 1% dimmer. Max number Leviton Centura Fluorescent Control System 100% - 1% of fixtures is limited by Lutron Nova NFTV-* dimmer plus 347V relay 100% - 1% dimmer load rating. Lutron Diva DVTV-* dimmer plus 347V relay 100% - 1% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D15 / DIML15 0-10V DIMMING W/RELAY TO SWITCH POWER DIMMER: 0-10V 0-10V (-) 0-10V (+) GRAY V- NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. CLASS 2 CONTROL WIRES RELAY DIML2 0-10V DIMMING (NO RELAY) GROUND DIMMER: 0-10V w/ POWER SWITCHING 0-10V (-) 0-10V (+) GRAY V- NOTE: Quickship fixtures are shipped prewired for 0-10V dimming controls. If switched, nondimming operation is desired, cap off purple and gray wires separately at installation. Do NOT cap purple and gray wires together. I2-264-15 Revised 03/22/2017

DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D19 / DIML19 D19 / DIML19 : Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver. Dims down to 1% contingent upon dimmer specification and load. 120V only. D19 / DIML19 2 WIRE PHASE DIMMING DIMMER: 2 WIRE PHASE V- GROUND ONLY FOR SWITCHES WITH D19 / DIML19 Dimmer Compatibility Chart 120V ONLY Forward Phase / TRIAC Dimming Manufacturer Product Qty Fixtures Per Dimmer Leviton IPL06-10Z Use fixture wattage per 6613-xxx fixture specification Lutron S-600P sheet to determine S-603P number of fixtures DV-600P per dimmer. Max number DV-603P of fixtures is limited by DVSC-603P dimmer load rating. CT-600P CT-603P 120V ONLY Reverse Phase / ELV Dimming Manufacturer Product Qty Fixtures Per Dimmer Leviton 6615 Use fixture wattage per IPE04-xxx fixture specification Lutron NTELV-300 sheet to determine NTELV-600 number of fixtures SELV-300P per dimmer. Max number SELV-303P of fixtures is limited by DVELV-300P dimmer load rating. DVELV-303P I2-264-19 Revised 03/22/2017