PRODUCT CATALOGUE
High-End Wireless Security The sophisticated iconnect system, with its sleek design, serves as the command center for a residential and small commercial Security and Home Automation network. Powered by the full range of ELAS remote management functions, iconnect effortlessly integrates remote signalling from end-users, monitoring statins, service providers and technicians. The ELAS enables remote programming and maintenance of the iconnect system by internet or smartphones, built-in interface with PSTN, GSM. GPRS communication modules, configuration of email and SMS event notification to users, and much more. The two-way wireless RF technology built into iconnect also enables the use of PIR cameras for event-triggered video images and clops, as well as video verification. The compatible EL two-way peripherals communicate with the iconnect control panel and respond to RF signals with top-level data security. Designed for superior efficiency, the peripherals only respond to signals when the control panel is armed, and then they act ith enhanced speed to minimize energy consumption and signal traffic congestion. Main Features Two-way wireless FM technology IP/GPRS/GSM or IP/GPRS communication modules Event reporting - IP/GPRS with GSM backup (Voice or SMS SIA/CID) Email/SMS/Voice event notifications to end users Advanced remote management features for users - Web and smartphone applications Event-triggered initiation of two-way voice communication - full duplex/simplex Remote programming, firmware updates and maintenance IP protocol via the internet (no need for static IP) Up to 2 optional wired zone expanders for an additional 8 and 16 wired zones Programmable output for wired siren Wired programming keypad Sleek, high-end design Complies with EN-50131-3 Grade 2 Class II Video Video verification User initiated (video) images Video look-in
Encrypted Two-Way FM Technology Incorporates two-way FM technology for optimal RF noise immunity Supports two-way communication to wireless products Digital RSSI (Reception Signal Strength Indication) Robust anti-collision transmission Frequency options: 868, 433MHz Full Range of Two-Way Wireless Peripherals Up to eight PIR cameras Interior and exterior motion detectors, including pet immunity Magnetic contact and universal transmitter Glass break detector and vibration sensor Smoke, gas and water leak detectors Panic and medical emergency buttons External and internal two-way wireless siren Up to 19 wireless keyfobs Wireless LCD programming keypad Advanced Installer Tools Menu-driven programming for quick and easy installation Remote firmware upgrades via IP or GPRS Advanced remote programming software: Fast up/down loading via PSTN, IP, GSM or GPRS Upload status to all wireless devices Installer built-in utilities: Real-time transmitter list and status, visible and audible signal strength meter GSM network coverage indication Smart walk test: transmitter test: wireless siren test: internal siren test: interface test Receiver quality measurement to evaluate signals in the same frequency Security Control Voice Verification Safety Connectivity GPRS GSM IP PSTN End User Service Provider Installer
Main Features Wireless FM Arming options Distress keys Number of user codes Maximum number of zones 34 Wireless zones 32 Wired zones Wireless keyfobs Wireless keypads Repeaters Number of accounts Reporting protocols End user notifications Event log Voice messages Speed dial numbers Web user application Mobile applications Full, perimeter, part or partitions Panic, fire, medical 32 four-digit codes 2 on-board + 8-16 D.E.O.L.R with zone expander Up to 19 multifunction keyfobs Up to 4 two-way keypads Up to 4 two-way repeaters Up to 6 accounts for central station event reporting or vocal message event reporting to the end user. Contact ID, SIA, SIA IP, SMS SIA, SMS Contact ID SMS messages, e-mails, voice messages, follow-me numbers 1022 on the control panel, over 2000 logged on the ELAS 22 recorded event messages; Home ID 1 service call Video verification, remote system activation and control, system settings, Event notification settings and PGM control Smartphone (iphone, Android etc.) applications for video verification, remote system activation, system settings, event notification settings and PGM control End User Features Email Video verification and event notification SMS options DTMF options Video verification Audio verification Remote system activation and control, event notification and PGM control Remote system activation and control, home automation control Smartphone applications, email and web Voice message event notification, two-way audio, follow-me, listen-in Professional Options Firmware upgrade Remote firmware upgrade Remote programming Local firmware upgrades via a standard USB cable Upgrade firmware via IP or GPRS Via PSTN, GSM, GPRS or IP Wired Accessories Wired zone expander Inputs: 8 wired zones, AC, backup battery, tamper, Bus. Outputs: 2 aux. power, 2 programmable outputs Modules PSTN Event notification, two-way audio, remote programming, listenin, DTMF control GSM Event notifications, SMS remote activations, two-way audio, remote programming, listen-in, DTMF control Ethernet (IP Module) GPRS Remote firmware upgrades, e-mails, event notifications (Including SMS via the ELAS), remote programming Remote firmware upgrade, e-mail, event notifications (Including SMS via the ELAS), remote programming Hardware Features Auxiliary power 1 output: 100mA max 2 additional outputs with zone expander: 1A max Programmable outputs Built-in siren Power supply Operating temperature Backup battery pack Communication modules 2 Solid state (100mA max load), Additional 2 with zone expander, solid state relay (1000mA max) 93dB Internal 9VAC output, 230v/115v input 0-60 C / 32-140 F 7.2V/1.5Ah PSTN, GSM /GPRS, IP
Wireless Input / Output Expander The 2-Way Wireless I/O Expander Module is an extension module that enables the connection of wired devices to the iconnect 2-Way system therefore transforming it into a true Hybrid system. The expander provides the flexibility to expand the possibilities of any iconnect 2-Way wireless installation by allowing the use of EL high-end wired devices. Up to 8 hardwired inputs and 4 programmable outputs can be assigned to each of the 2 optional expanders connected to the system. The wireless I/O expander is the ideal solution for integrating the power of wired into your wireless application. Bi-directional wireless communication 8 zone inputs (NO, NC, EOL, DEOL) Up to 2 per system, meaning up to 16 wired zones + 2 on the iconnect 2-Way main board 2 auxiliary parallel outputs 12 volts@1000ma per expander PGM-Programmable Outputs: Dry contact, 1A@30VDC, 0.5A@25VDC Fully supervised Dual tamper protection (Box & Wall) Stand alone with local power (no need to run wires to the panel) Includes a polycarbonate box and a 14.4v/1.5A power supply Optional back-up battery 12V/7AH I/O EXPANDER Two-Way Wireless PIR Camera Specifically designed for EL s Two-Way Wireless range, the PIR Camera incorporates three state-of-the-art technologies: PIR motion detection, CMOS imaging technology and two-way wireless communication. When armed, the Camera is automatically activated by an event and captures a series of images before, during and after the alarm. These are sent to users or security personnel smartphone and web applications.
Users can also trigger video transmission on demand, through the ELAS smartphone application and web interface, which remotely activates the PIR Camera and generates real-time snapshots of the protected site: verifying an intrusion, looking in on a child, or checking the premises for lights left on. Based on provider s end user control settings, users may likewise remotely disable the camera to save battery power or protect privacy. Technical Specification: 14m x 14m range Installation height 2.5m PET Immunity option (45Kg animals) Digital Adaptive Temperature Compensation 1,2 or 3 pulse count High sensitivity 1/4 inch CMOS image sensor Various picture resolutions VGA, QVGA, QQVGA, in color or B&W Night vision with 2 IR LEDs IR flash ensures camera picture capture remains discreet 10m coverage range in absolute darkness Automatic B&W in low light conditions Two powerful AA 3.6V/2Ah batteries for extended battery life No. of pictures per event configurable from 1 to 10 Configurable time delay between picture capture (2fps to 15fps) Remote camera settings configuration via the ELAS Up to 8 Wireless PIR Cameras can be installed with each panel Any detector can be configured to activate picture capture Sleep mode during disarm for battery conservation Optional bracket support Video Verification: Real-time video verification for efficient event assessment Allows immediate confirmation of a crime-in-progress Users and monitoring services can verify events to determine the most appropriate response in real-time. PIR Cameras IP GPRS Internet ELAS Monitoring station Email alert Phone alert Smartphone App notification
Wireless Outdoor Motion Detector The Wireless Outdoor Detector s robust design incorporates two PIR channels that cross-check their target signals to eliminate false alarms while providing high catch performance. Reliability is enhanced by a weather-resistant housing with rubber seal and protective hood 12m wide-angle coverage Two PIRs for eliminating false alarms Pet-friendly up to 45kg Integral hood provides protection from sun and rain Two 3V lithium batteries Optional long-range lens Two-Way Wireless Motion Detector This two-way motion detector s sleek design houses a smart detector which incorporates a low-current microprocessor, enabling it to distinguish between false alarms and intruders. Features include adaptive pulse and temperature-change compensation. Optional pet immunity version. Micro-controller based signal processing Built-in bracket for easy installation Range of 14 meters PIR supervision Optional pet immunity up to 45kg Digital adaptive temperature compensation Pulse count options (1, 2, 3, or Adaptive) Option to disable LED indication 3.6 V ½ AA lithium battery - can be replaced independently by end-user Wireless Magnetic Door Contact This compact magnetic device detects door and window intrusion. Designed for use with EL's supervised wireless range of receivers, additional input can be integrated to work in parallel to the magnetic switch, for a wider range of wireless protection. 3.6 V ½ AA lithium battery Small size: 65x30x16mm Front and back tamper options Additional input terminal Input activation: by a short, dry contact or open collector Data transmitted: alarm, tamper, low battery and supervision Wireless Flood Detector The Flood Detector uses micro-controller based signal processing to provide early warning of water leaks. The compact, robust device is ideal for use in basements or near air conditioners and sinks, and works independently during power outages. 3.6 V ½ AA lithium battery Small size: 65x30x16mm Front tamper Data transmitted: alarm, tamper, low battery and supervision
Wireless Universal Transmitter The Universal Transmitter is effective in connecting a variety of peripherals to the control system. The transmitter includes a single input terminal for use in a wide range of wireless applications. 3.6 V ½ AA lithium battery Small size: 65x30x16mm Front and back tamper Input activation: by a short, dry contact or open collector Data transmitted: alarm, tamper, low battery and supervision Wireless Vibration Detector This adjustable Vibration Detector senses low-amplitude vibrations around vulnerable access points, setting off an alarm before an intruder has a chance to enter the premises. The value of this detector lies in its ability to sound off during the first stage of a break-in attempt, before any damage can be done. Sensitivity adjusted to local background noise during installation 3.6 V ½ AA lithium battery Four-minute delay between transmissions conserves battery and prevents multiple alarms for one event Impact strength indicator Data transmitted: alarm, tamper, low battery and supervision Front and back tamper Wireless Smoke Detector The Smoke Detector is a photoelectric device that integrates fire warning capability with intruder alarm systems. Designed for use in a single residential unit, the Smoke Detector transmits constant supervision reports. When significant smoke is accumulated, the detector sounds an alarm horn and the transmitter sends an alert to users and/or security personnel. Range up to 300m (1000ft) line of sight Ceiling mount No radiation emission Data transmission: alarm, restore, low battery and supervision Test mode Back tamper Uses two 3V lithium batteries Complies with EN54-7 Wireless Gas Detector The Wireless Gas Detector, a combination gas alarm and integrated transmitter, provides warnings of gas leaks from various household appliances. On detecting the presence of dangerous gases, the unit sounds an alarm and notifies the control panel. Detects Butane, Propane and Methane (natural gas) Loud alarm (85 db) and signal transmitted when detecting gas build up Fully supervised device Test button and continuous self-testing function Powered by 220V AC local current
Wireless CO Detector The CO Detector emits an alarm in the presence of hazardous levels of carbon monoxide gas. An advanced electro-chemical sensor detects and measures the concentration of the CO, sounds a local alarm and transmits an alert to the control panel. The user-friendly LED panel is color-coded for quick reading. Test button and continuous self-testing function Audible alarm of 85 db at 3 meters Two 3V lithium batteries LED indicators: Green (Power On flashes once per minute), Red (Alarm), Orange (Malfunction), all three (Test Mode) Data transmitted: alarm, tamper, low battery and supervision Wireless Repeater The Wireless Repeater extends the range between the control panel and wireless detectors, eliminating problematic reception areas. The Repeater can handle registration for up to 32 transmitters and is compatible with EL s Two-Way Wireless product range. LCD programming keypad plug-in connection Battery and AC status LED indicators Runs on 9V AC or 12V DC transformer Backup power: 6V/850mAh battery (five 1.2 Ni-MH rechargeable cells, size AAAL) Built-in transmitter and receiver Tamper switch Two-Way Wireless LCD Keypad The two-way fully wireless LCD keypad offers comprehensive and simple system programming and control with home automation features. The keypad is modern, streamlined keypad that enables users to remotely control and operate their iconnect two-way security systems. Using the modern blue LCD display and the multi-language support, the system is easy to operate using the keypad itself. The easy to use menus and adaptive menu tree options according to hardware helps to make the keypad a friendly installation tool Fully wireless installer programming and end-user operation Blue LCD and backlight Up to 3 keypads per system Simplified menu logic. Displays only relevant menus according to hardware configuration, accessories installed and authorization level 2 button emergency keys Bracket to wall for easy installation Double tamper protection Battery save mode 4 x 1.5V, 3AH, AA LITHIUM Batteries
Wireless Emergency / Panic Keyfob This one-button device is a water-resistant handheld transmitter designed for crisis notification and emergency calls. The large button makes its use easy for the elderly, disabled and sight-impaired individuals. Two versions: Panic and Medical Emergency LED transmission indicator also flashes to indicate low battery 3V lithium battery Data transmitted: Event (Medical or Panic), Low Battery Wireless Multi-function Keyfob This newly designed miniature keyfob can easily fit onto a keychain for fashionable convenience and control. The wireless device uses a single off the-shelf battery, with efficient power use for longer battery life. Four-button keyfob Five Functions: Full, Part & Perimeter Arm, Disarm, Home Automation On/Off, Panic Alarm Generation LED transmission indication, also flashes to indicate low battery Two-way version includes status indication Ultra-compact: 44mm diameter x 14mm 3V lithium battery Wireless Indoor Siren This indoor wireless siren is designed for use with EL s wireless control systems. A smart algorithm to ensure extended battery life. Compact design and dependable operation are some of the advantages. Siren output: 105 db at 1 meter Includes 5 x long life 3v Lithium batteries Dimensions: 180mm in diameter Wireless Outdoor Siren The fully wireless, two-way amber triangle siren comes with a highvisibility strobe. Battery life is extended using smart algorithms and a high -power battery. The siren relays various alerts (Burglary, Fire, Arming/ Disarming) from the panel and transmits warning signals (low battery, AC loss and tamper alert) to the panel. Designed to extend the signalling capabilities of the security system outside the protected area in any outdoor environment. Being fully battery operated and wireless, the external wireless siren offers an easy and flexible solution for quick installation. Up to four sirens can be connected to one system. Two-way wireless uses proprietary robust FM technology Fully independent battery power Battery type: 3.6V/13Ah lithium D size Siren output: 106 db at 1 meter Front and back tamper
Wireless IP Camera Indoor Professional IP camera provides a complete plug and play video verification solution together with the security systems for both residential and commercial installations. 1,3 megapixel Colour HD, 2-way audio channel Micro SD slot for local storage Wifi IR leds 10m Wired IP Camera Outdoor Professional IP camera provides a complete plug and play video verification solution together with the security systems for both residential and commercial installations. 1,3 megapixel Colour HD PoE (Power over Etheret) Day / night IR leds 30m Wired Micro-X Micro-X is a 12m (adjustable) DUAL TECHNOLOGY detector. Incorporating High Quality PIR and very stable Microwave Detector 9-16V DC Coverage 12m x 12m Dual element sensor with build-in patch antenna Led indicators, selectable Microwave Frequency: 10.525, 10.687, 9.9 or 9.3GHz Wired Quest The Quest's enviable feature list includes white light filter, selectable pulse count and exceptionally effective RFI immunity all working together to virtually eliminate false activation. Moulded from polished white plastic and of a compact but easy to work with size the Quest will blend in perfectly with all decors. 9-16V DC RFI immunity Alarm output Tamper switch
Watchout Extreme Outdoor Dual Tech Detector The improved WatchOUT extreme provides better 24-hour protection against vandalism, with both Active IR Anti-mask and Proximity alerts. This together with unique outdoor detection technologies, Sway Recognition and Digital Correlation takes performance to the extreme. 4 Detector Channels: 2 Microwave and 2 PIR Coverage Wide Angle: 15m 90 degrees, long range 23m 5 degrees, barrier 15m 5 degrees Pet Friendly for animals up to 70cm height IP 65 environment rating with protective hood Anti Masking