UniTrane U-Line ductable water terminals Optimum efficiency with a sound reduction bonus

UniTrane U-Line ductable water terminals Optimum efficiency with a sound reduction bonus

The perfect fit where quality and comfort Adding to Trane s broad portfolio of water terminals, the new Trane UniTrane U-Line s innovative u-turn airflow pattern make them perfect for buildings where individual offices of 10-30 m² are grouped around a building s perimeter surrounding, for instance, a corridor or a common circulation zone. The U-line terminal units are designed specifically for installation in the false ceiling of corridors, with the conditioned air being ducted into each individual office. The outstanding quality of comfort provided is enhanced by the units compact dimensions and a layout ensuring ease of installation and service. The result is a blend of performance, energy efficiency and value that can offer building owners and investors a fast (as little as 1½ years), secure return on their investment thanks to enhanced ability to rent or sell at a premium rate. Added comfort thanks to lower sound levels Since the sound emitted by U-Line terminal units is contained in the false ceiling in the corridor, it does not disturb office occupants. Therefore, compared to a terminal unit installed directly overhead in the office itself, the U-Line terminals reduce the global sound levels by 4 to 6 db in the air-conditioned space. Easier access Thanks to their remote location outside individual offices, access to the U-Line terminals for inspection, maintenance and servicing can occur during working hours without disturbing office occupants. Fast, easy installation When you opt for U-Line terminal units, only straight and short ductwork lengths are needed to route conditioned air into individual offices allowing money and time savings during installation. This is because outlet and return air are both routed on the same side of the unit. Consequently the treated air makes a u-turn inside the unit casing rather than this having to be achieved with the ductwork. In addition, the unit s low 225 mm height leaves more room in the false ceiling for access to the filter and fan motor, as well as more height for the condensate drainage piping work, reducing the need for condensate pump installation. Perfectly configured terminals straight from the factory The U-Line s fan motor options have been specifically defined to fit a wide airflow range and to match with either standard or high coil efficiency in order to meet the load requirements of office areas from 10-30 m². Airflow is managed either by factory-wiring 3 speeds from a total of 5 available speeds or by pre-defining the operating airflow range in the presence of an EC fan motor. UniTrane U-Line ductable water terminals

count Lower energy consumption In its U-Line range, Trane offers a model which is equipped with an EC fan motor that can reduce fan motor energy consumption by 80%, resulting in a significant reduction in electricity bills. Used with its associated variable speed controller, the EC fan motor also improves thermal and acoustic comfort while providing the exact amount of capacity needed for effective operation. U-Line Controls solution with Trane Tracer ZN523 or ZN525 controllers. Trane s controllers are designed to provide fan speed optimization by keeping the fan at the lowest speed for a quiet working environment. They also integrate a specific control algorithm, based on room and discharge air temperature measures, as to eliminate uncomfortable hot/cold shower feelings. Tracer ZNs are LonMark certified and support SCC 8501 profile for easy BMS integration. Tracer ZN525 and ZN523 are proposed as factory-mounted controllers to drastically reduce on-site commissioning time, and ensure optimum quality and reliability of the assembly. Trane s controllers can deliver a fully integrated room comfort solution, when associated with Trane wired wall interfaces ZSM10, ZSM11 and ZSM31 or the wireless ZSM31-W. Typical installation showing UniTrane U-Line terminal units installed in the corridor, providing conditioned air for each individual office via diffusers. 3

Performance tailored to deliver a Offering best-in-class HVAC performance together with easy installation and servicing, the Trane UniTrane U-Line chilled water terminals are factory-configured specifically to meet today s stringent energy and comfort demands. 1 High efficiency or standard efficiency 2-pipe/4-pipe coil options are available for cooling or heating applications. 2 The U-Line model with EC fan motor helps reduce energy consumption by a factor of up to four. An AC fan motor is also available. A range of different sized electric heaters are available for 2-pipe coils supplied factory-mounted to save time on the jobsite. 3 To maintain the highest indoor air quality, a constant fresh air inlet spigot with adjustable airflow controller can be factory-mounted on the return air inlet. Return and supply air on the same side of the terminal allow conditioned air to be brought into the room with straight ducts, minimizing air pressure drop. 4 5 1 7 UniTrane U-Line ductable water terminals

dded value 4 Water valves, together with their associated controls, can be factory-mounted. 5 A smart, quick hanging system ensures fast, easy installation. For easy connection and access, water piping, electricity and control wiring are grouped on the opposite side of the return and supply air spigots. 5 6 Filter and fan deck are easily accessible from underneath the unit. The low height (225 mm) of the terminal unit allows easy integration into even the smallest false ceiling space, and leaves more space for maintenance and for condensate drainage. 3 7 Optional condensate drain pump is factorymounted to save time on the jobsite. 2 6 5

The single source for all your building nee When you specify a Trane water terminal, you don t just get a top-class product, you also get the expertise to optimize your whole HVAC system and keep your total building operating cost to a minimum while maintaining the utmost level of comfort. Heating, ventilating and air conditioning systems Depending on your building or process, you may need a chiller, a rooftop, an air handling unit or other terminal units. And here Trane can help as well. As one of the world s leading HVAC equipment manufacturers we can provide the exact solution. Moreover, Trane equipment comes with factory-mounted controllers for integration within a Trane Building Management System. Building management systems The Tracer Summit building management system provides supervision and control through a single, integrated system. Its userfriendly graphical interface, associated with its pre-engineered functions, and standard communication protocols allows you to efficiently pilot your building performance. Tracer Summit can help you meet your building s temperature, humidity, ventilation and energy management needs, no matter how challenging. High quality, easy-to-use, integrated and reliable controls are the key to maximizing efficiency and to prolonging the life of your building comfort system. Peace of mind from total accountability UniTrane U-Line ductable water terminals

AND ds Your total building solutions At Trane, we are committed to providing full service solutions that are efficient and reliable, just like our equipment. Elite Start Trane equipment is commissioned by technically competent factory trained technicians. Trane commissioning confirms that the system has been not only accurately installed, but also configured and fine-tuned to operate according to your requirements. Operate and Maintain To keep your building operating at top efficiency, Trane Select Contracts and Trane Controls Services provide total building service solutions. Trane offers technical expertise to maintain or repair your system and the spare parts that go with it. Our full range of HVAC spare parts, both Trane-specific and generic, coupled with our advanced logistics network ensures a quick and reliable service. The result? Even in the rare event of equipment failure, downtime is kept to an absolute minimum. Upgrade and Improve To help you conserve energy while maximizing cost saving in your building systems and operations, Trane Care Services offer a wide range of upgrade products to answer your needs in terms of reliability, energy conservation, and respect of the environment. OPERATE AND MAINTAIN MAINTAIN OPERATE Elite Start UPGRADE AND UPGRADE AND IMPROVE IMPROVE Make certain your HVAC systems are fully optimized and integrated with our expert services.

How do you choose? There are hundreds of possible system designs and configurations impacting system efficiency levels. How do you possibly narrow the choices and definitively determine the right HVAC system design for your needs? Amazingly, it s quite easy with Trane s help. Our System Analyzer helps estimate building loads and performs preliminary energy and cost analyses of virtually any building, system, and equipment combination. For LEED certification, TRACE 700 (Trane Air Conditioning Economics) software helps analyze the energy and economic effects of virtually any system configuration. It allows you to manipulate a wide range of variables to create a detailed energy usage profile for your specific building. Unlike overly simplified spreadsheet-based energy analyses, TRACE 700 software accurately compares the impact of building alternatives. You can test the effects and consequences of different architectural features, HVAC systems, building utilization or scheduling scenarios. And you can see the different economic options for each scenario. This enables you to make genuine life-cycle, cost-based system decisions with absolute confidence. Call on Trane We can help you plan, install and manage your next HVAC system so you can concentrate on your core business. Our experience and expertise in designing, commissioning and maintaining HVAC systems not only guarantees a solution that best answers your needs, it also gives you complete efficiency and peace of mind. Call us, let s talk. Trane optimizes the performance of homes and buildings around the world. A business of Ingersoll Rand, the leader in creating and sustaining safe, comfortable and energy efficient environments, Trane offers a broad portfolio of advanced controls and HVAC systems, comprehensive building services, and parts. For more information, visit www.trane.com. Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice. Trane bvba, Lenneke Marelaan 6, 1932 Sint-Stevens-Woluwe, Belgium, ON 0888.048.262 - RPR Brussels 2010 Trane All rights reserved FIN-SLB005-E4, May 2010