Australian made Valor, AFRDI 6 & GECA approved visitor seating Lic: C H S 200 8 GECA- 28-2006 - Furniture and Fittings
Specification The Valor is a durable and comprehensive range of chairs designed in Italy. A strong tubular frame made of 25mm diameter steel, - available in a choice of 4 leg or sled frame, moulded seat foams for comfort and durability, optional with arms. All parts are made for easy dissasembly and covered by GECA, Ecospecifier, Earth Saver and tested to AFRDI 6. Lowest carbon footprint guaranteed, produced in Sydney, Melbourne, Brisbane and Perth factories, saving precious fossil fuels in transportation. Go Green. OPTIONAL SLED LEG 450 450 500 810 460 610 510 4 LEG - ARMS 4 LEG - NO ARMS
Materials Options Frame - 4 Leg - 25mm tubular steel with 2mm wall thickness and cross braced under the seat. Frame - Sled - 25mm tubular steel with 2mm 2wall thickness and cross braced under the seat. Back - inner/outer plastics, PP05 resin code, 100% recyclable. Seat - inner/outer plastics, PP05 resin code, 100%recyclable Seat foam - Australian-made moulded seat FR CM2/5 combustion modified. HSS-60kg/m 3 density and 200N hardness AS/NZS 4088.1 flammability, AS 2282.3 density. Back foam - Australian-made foam. AS/NZS 4088.1 flammability, AS 2282.3 density. AFRDI AS/NZS 4688 LEVEL 6 TESTING INCLUDES STATIC LOAD TESTS - 200 kg on seat applied 20 times - 76 kg on back applied 10 times - 120 kg downwards on each arm applied 10 times - 90 kg outwards on each arm applied 10 times These are overload tests and not to be considered as normal working loads Arms Black drop arm No arms Linking Removeable plastic links No links Frame Black 4 leg* Chrome 4 leg Black Sled (Stacking - no arms)* Chrome Sled (stacking - no arms) Beam Seating Option - 2 seater - 3 seater - 4 seater - 5 seater *GECA Certified Upholstery Quick ship in corporate navy, grey and black. All other fabrics available. FATIGUE TEST LOADS - 120 kg on seat cycled 200,000 times - 41.5 kg on back cycled 200,000 times IMPACT TESTS - 25 kg dropped onto seat 20 times from height of 300 mm
Certifications
The Environment The following table shows the end-of-life properties of the chair. MATERIAL TYPE CHAIR COMPONENT WEIGHT (KG) % RECYCLED COMPONENT % RECYCLABLE AFTER USE PLASTIC Seat inner PP05 0.79 50% 100% Seat outer PP05 1.05 50% 100% Back inner PP05 0.41 50% 100% Back outer PP05 0.87 50% 100% STEEL 4 leg frame and screws 3.6 0% 100% ALUMINIUM FOAM Moulded seat foam 0.5 0% 100% FABRIC Dunlop back foam 0.2 0% 100% PACKAGING Plastic bag 0.11 0% Biodegradable Total 7.53 26% 100% End of Life The Valor is also recognised as an Earth Saver product. Valor also has Ecospecifier accreditation. The Valor has a full product stewardship programme for recycling at 4 locations - Sydney, Melbourne, Brisbane and Perth. Foams are crumbed and become carpet underlay Steel components are melted down for re-use Alloys are recycled All plastic and nylon parts are sorted into resin codes (eg. PPO5 or PPK20) for recycling Delivery Options Chairs are fully assembled units, stacked up to 3 high and bagged for transportation. BAGGED AND READY TO GO
Instructions for use Sled and 4 Leg Please ensure chair base/feet are in contact with floor surface at all times Do not sit on back of chair Do not sit on arms of chair Do not lean back onto back legs of chair Regular Care FRAME UPHOLSTERY - FABRICS No maintenance required. However it can be wiped over with a damp cloth. Protect from direct sunlight. Vacuum regularly using low suction. Cleaning SPOT CLEANING Treat spills and stains as soon as possible Gently scrape any soil or mop any liquid from the surface of the fabric Do not scrub Apply proprietary cleaning agents strictly according to instructions to remove the residue of the spill Do not saturate the fabric or interior with water or other cleaning liquids May be spot cleaned with drycleaning fluid CLEANING Clean with hot water extraction machine (hot) Professional cleaning recommended Do not use dishwashing or laundry detergents Use only upholstery detergent Do not wet filling Dry in shade away from direct heat and sunlight Allow to dry thoroughly before re-use OR Clean using an on-site drycleaning machine (P) Professional cleaning only Do not wet filling with solvent Extract solvent thoroughly after application Wipe gently, do not rub CAUTION exhaust solvent vapour outside building. Provide adequate ventilation during cleaning and drying Allow to dry thoroughly before re-use Avoid use of room during drying period OR May be shampoo cleaned using upholstery shampoo Do not use dishwashing or laundry detergents Do not wet filling Wipe gently, do not rub Dry in shade away from direct heat and sunlight Allow to dry thoroughly before re-use