The SharpEye 40/40I (IR3) Flame Detection combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Dräger offers a wide variety of high-quality flame-detectors that fulfil these requirements and more. Enclosure made of stainless steel SS 316L Indicator LED Heated window D-9272-2014 2 Cable entries Various accessories can be installed
02 The SharpEye 40/40I (IR3) Benefits Superior Performance The new SharpEye 40/40I offered by Dräger combines exceptional reliability with tough design and easy handling. Its multi-spectrum setup is based on three IR bands (IR3) and can quickly detect and report fuel and gas fires at considerably long distances. This combined with its high degree of operational flexibility and compatibility with other systems and interfaces makes it ideal for a large number of applications. Immunity To False Alarms With the 40/40I, you can be sure that common sources of unwanted alarms such as hotworks, hot CO2 emissions and flares reflections are no longer a problem. Plus, its sensitivity selection ensures that there is no zone crossover detection. Tough & Durable As a weather resistant detector currently on the market, the 40/40I is built to effortlessly function under various conditions. Such new features like its heated window effectively eliminate icing and condensation problems. In addition to many other innovative features, the device comes with DNV and MED shipping approval. Nothing Unnoticed The 40/40I is your guarantee that flame detection is quick and accurate. With a MTBF minimum of 150,000 hours and the ability to detect a 0.1 m2 gasoline pan fire at 65 m in less than 5 seconds, you can be sure that the safety of your operations and your workers is in the best of hands. Reliability Functional safety is a concept applicable across all industry sectors. It is fundamental to the enabling of complex technology used for safety-related systems. It provides the assurance that the safety-related systems will offer the necessary risk reduction required to achieve safety for the equipment. The SharpEye 40/40 flame detector series is highly reliable and complies with the IEC 61508 Safety Integrity Requirements of SIL2. Automatic and manual optics checks (BIT) Automatic checks of the detector electronics and optics increase reliability. Additionally the test can be triggered manually at any time. Easily visible status LED A tri-colored LED which is visible at the front of the detector provides a simple status indication to personnel in close proximity to the detector. Green indicates normal operation; yellow indicates a fault and red indicates the presence of a fire.
The SharpEye 40/40I (IR3) 03 Benefits Simple installation and commissioning Installation is simple! The detector is easily installed with a stainless steel tilt mount; enables the detector to be rotated up to 60 in all directions to position the detector in relation to the potential fire source. SharpEye 40/40I offers: Multi spectrum design - for long distance detection and high false alarm immunity Advanced Digital Processing of the Dynamic Characteristics of Fire (flickering, threshold correlation and ratio) Sensitivity selection to ensure no zone crossover detection Automatic and Manual Built-In-Test (BIT) to assure continued reliable operation Heated window for operation in harsh weather conditions (snow, ice, condensation) Multiple output options for maximum flexibility and compatibility 3 Relays for Alarm, Fault and Auxiliary 0 20 ma (stepped) HART Protocol for maintenance and asset management RS-485, Modbus compatible Approved to Safety Integrity Level 2 (SIL2 TÜV) Ex approvals for worldwide application: ATEX, IECEx, FM/FMC, CSA 3rd party performance tested: EN54-10 (VdS), FM3260 Marine approval: DNV type approval MED-B and MED-D approval (wheelmark), issued by DNV
04 The SharpEye 40/40I (IR3) Accessories D-2320-2014 Flame Simulator 40/40 - IR3 The SharpEye IR3 Flame Simulator 40/40 - IR3 is designed specifically for use with SharpEye flame detectors. The Fire Simulator emits IR radiation in a unique sequential pattern corresponding to and recognizable by the detector as fire. This allows the detectors to be tested under simulated fire conditions without the associated risks of an open flame. There is an optional Beam collimator IR3, specially designed for extended test range. Weather cover Flame Detector D-2317-2014 The weather cover protects the detector from different weather conditions, such as snow and rain. SharpEye 40/40 Air Shield D-5526-2014 The special Air Shield, developed for SharpEye optical flame detectors, allows their installation under tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter.
The SharpEye 40/40I (IR3) 05 Related Products The SharpEye 40/40M (Multi IR) D-9271-2014 combine state-of-the-art technology with rugged durability and be ready The SharpEye 40/40R (IR) D-9306-2014 combine state-of-the-art technology with rugged durability and be ready The SharpEye 40/40U-UB (UV) D-9307-2014 combine state-of-the-art technology with rugged durability and be ready The SharpEye 40/40UFL (UV/IR) D-9288-2014 combine state-of-the-art technology with rugged durability and be ready
06 The SharpEye 40/40I (IR3) Related Products The SharpEye 40/40L-LB (UV/IR) D-9289-2014 combine state-of the-art technology with rugged durability and be ready The SharpEye 40/40L4-L4B (UV/IR) D-9289-2014 combine state-of-the-art technology with rugged durability and be ready
The SharpEye 40/40I (IR3) 07 Technical Data Type Explosion proof IR flame detector for hydrocarbon based fires Measuring Performance Field of view Horizontal 100 ; Vertical 95 Sensitivity Ranges 4 Sensitive ranges for 1 ft2 (0.1 m2) n-heptane pan fire from 50 ft (15 m) to 215 ft (65 m) Spectral response Detection Range (at highest Sensitivity Setting for 1 ft2 (0.1 m2) pan fire) Three IR Bands 2 to 5 μm Response Time Typically 5 seconds Fuel ft / m n-heptane / Gasoline Diesel Fuel / JP5 / Kerosene Ethanol 95 % Methanol IPA (Isopropyl Alcohol) Methane / LPG* Polypropylene Pellets 150 / 45 135 / 40 115 / 35 135 / 40 150 / 45 115 / 35 Office Paper 83 / 25 * 30 (0.75 m) high, 10 (0.25 m) width plume fire Electrical Data 215 / 65 Output Signals 0 20 ma (stepped), HART BIT Fault Signal 2 ma ±10 % Fault Signal 0 + 1 ma Normal Signal 4 ma ±10 % Warning Signal 16 ma ±5 % Alarm Signal 20 ma ±5 % Relays Alarm, Fault and Auxiliary SPST volt-free contacts rated 2 A at 30 VDC RS485 Modbus compatible communication link Power supply 24 VDC nominal (18 32 VDC) Power Consumption Standby: Max. 90 ma (110 ma with heated window) Alarm: Max. 130 ma (160 ma with heated window) Ambient Conditions Temperature -55 to +75 C / -67 to +167 F (operating) -55 to +85 C / -67 to +185 F (option and storage) Humidity Up to 95 % non-condensing (withstands up to 100 % RH for short periods) Enclosure Material Stainless steel SS 316L Connecting thread 2 x 3/4" 14 NPT or 2 x M25 x 1.5 mm Dimensions Detector 101.6 x 117 x 157 mm Material option (only available with ATEX approved versions) heavy duty copper free aluminum, red epoxy enamel finish Weight Detector SS 316L 2.8 kg / aluminum 1.3 kg Tilt mount 1.0 kg Ingress Protection Approvals ATEX and IECEx IP66 and IP67, NEMA 250 6P Ex II 2 G D Ex d e IIC T5 Gb Ex d e IIC T4 Gb (-55 C Ta +75 C) (-55 C Ta +85 C) Ex tb IIIC T96 C Db Ex tb IIIC T106 C Db
08 The SharpEye 40/40I (IR3) Technical Data FM/FMC/CSA Safety Integrity Level Performance Marine CE mark Class I Div. 1, Groups B, C & D Class II/III Div. 1, Groups E, F & G SIL2 certified by TÜV (EN61508) EN54-10 (VdS) FM3260 DNV and ABS type approval MED-B and MED-D approval (wheelmark), issued by DNV EMI/RFI protected to EN61326-3 and EN61000-6-3 Ordering Information Order Information SharpEye 40/40I (IR3) Flame Detector 40/40I-112SF IR3 68 13 170 Flame Detector 40/40I-212SF IR3 68 13 172 Flame Detector 40/40I-211SF IR3 Flame Detector 40/40I-222SF IR3 Flame Detector 40/40I-311SF IR3 Flame Detector 40/40I-111SC IR3 Flame Detector 40/40I-211SC IR3 Flame Detector 40/40I-212SC IR3 Flame Detector 40/40I-311SC IR3 Flame Detector 40/40I-111AC IR3 Flame Detector 40/40I-121AC IR3 Flame Detector 40/40I-211AC IR3 Flame Detector 40/40I-212AC IR3 Flame Detector 40/40I-221SC IR3 Flame Detector 40/40I-422SC IR3 Flame Detector 40/40I-221AC IR3 Other versions are available on request Accessories for SharpEye 40/40I (IR3) 68 13 171 68 13 457 68 13 173 68 13 174 68 13 175 68 13 176 68 13 177 68 13 178 68 13 566 68 13 179 68 13 180 68 13 422 68 13 421 68 13 423 Weather cover Flame Detector (SS) 68 13 189 Tilt mount Flame Detector (SS) 68 13 191 Weather cover Flame Detector (ABS) Flame Simulator 40/40 IR3 Flame Simulator FS-1100 Beam collimator IR3 Mini-Laptop Diagnostic Kit USB / RS485 converter kit, incl. SW SharpEye Laser Pointer SharpEye 40/40 Air Shield SharpEye 40/40 Duct Mount Pole Mount (U-Bolt) 2" (SS) Pole Mount (U-Bolt) 3" (SS) SharpEye is a registered trademark of Spectrex Inc. 68 13 190 68 13 192 68 13 461 68 13 195 68 13 319 68 13 320 68 13 321 68 51 603 68 13 459 68 13 322 68 13 323
The SharpEye 40/40I (IR3) 09 Notes
10 The SharpEye 40/40I (IR3) 90 45 344 16.10-4 HQ PP Subject to modifications 2016 Drägerwerk AG & Co. KGaA Notes Not all products, features, or services are for sale in all countries. Mentioned Trademarks are only registered in certain countries and not necessarily in the country in which this material is released. Go to www.draeger.com/trademarks to find the current status. CORPORATE HEADQUARTERS Drägerwerk AG & Co. KGaA Moislinger Allee 53 55 23558 Lübeck, Germany www.draeger.com Manufacturer: Spectrex Inc. 218 Little Falls Road Cedar Grove, NJ 07009 USA Locate your Regional Sales Representative at: www.draeger.com/contact REGION DACH Dräger Safety AG & Co. KGaA Revalstraße 1 23560 Lübeck, Germany Tel +49 451 882 0 Fax +49 451 882 2080 info@draeger.com. REGION EUROPE Dräger Safety AG & Co. KGaA Revalstraße 1 23560 Lübeck, Germany Tel +49 451 882 0 Fax +49 451 882 2080 info@draeger.com. REGION MIDDLE EAST, AFRICA Dräger Safety AG & Co. KGaA Branch Office P.O. Box 505108 Dubai, United Arab Emirates Tel +971 4 4294 600 Fax +971 4 4294 699 contactuae@draeger.com. REGION ASIA PACIFIC Draeger Safety Asia Pte Ltd 25 International Business Park #04-20/21 German Centre Singapore 609916 Tel +65 6308 9400 Fax +65 6308 9401 asia.pacific@draeger.com. REGION CENTRAL AND SOUTH AMERICA Dräger Panama S. de R.L. Complejo Business Park, V tower, 10th floor Panama City Tel +507 377 9100 Fax +507 377 9130 contactcsa@draeger.com.