Operation Manual and Parts Directory MF, MF6, MF8 Mug Frosters and Plate Chillers MF-S MF8-B Glastender, Inc. 00 North Michigan Road Saginaw, MI 860-9780 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com Rev. -0-08 008 Glastender, Inc.
Index Topic Page Terms and Conditions... arranty Statement... Installation... Operation... Cleaning Instructions... Electrical and Refrigeration Specifications... iring Diagram... Compressor and condenser related parts...-6 Evaporator and related parts...7 Electrical Components... 8 Shelving and related parts... 9 Doors, tops and related parts... 0 Refrigeration compartment covers... 0 Volt Electrical Parts... Installation Notes... 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
Terms and Conditions Prices: All prices are LIST. Applicable taxes will be added. Quotations: Unless otherwise stated, quotations are effective for 0 days only. Acceptance: All orders are subject to acceptance by Glastender, Inc. s headquarters in Saginaw, Michigan. Possession of the Parts Directory and Price List is not an offer to sell. Shipments: F.O.B. factory in Saginaw, Michigan. Partial shipments will be made unless otherwise specified by the customer. Orders are shipped via UPS or DHL unless otherwise specified. Payment Terms: Cash should be included with all orders unless credit terms have been arranged. To establish credit, banking and trade references are required. A convenient credit application is available upon request. Visa and MasterCard are also accepted. Delivery: Varies according to prior production commitments, but parts orders generally ship within two working days. Returns: A Return Authorization (RA) number must be issued by the factory in advance for any items that are returnable. The RA number MUST be noted on the outside of the returned package. Returns must be received within 90 days of the RA issue date. Shipping charges must be prepaid. A 0% handling charge will be applied to all authorized returns if received in new, unused condition in the original packaging. Loss or Damage: Glastender, Inc. is not responsible for any loss, damage, or delay of merchandise during shipment. Such transit claims must be filed with the carrier. Merchandise must be examined on arrival. If shortages occur, Glastender, Inc. must be notified in writing within five () days of delivery to honor any shortage claim. NOTE: Glastender, Inc. s policy of constant quality improvement means that prices, specifications, and policies are subject to change without notice. arranty Statement LABOR: Glastender, Inc. warrants all products to be free of defects in material and workmanship. In established areas, a start-up and a 90- day labor warranty are included with glasswasher models GT- and GT-0. The GT-8 series glasswashers include a 90-day labor warranty. Self-contained refrigeration models, except beer line chillers, include a -year labor warranty, for the duration of one year from date of installation or up to 8 months from date of factory shipment, whichever occurs sooner. For warranty labor claims beyond months from the date of factory shipment, proof of date of installation or occupancy must be provided. Authorization for labor must be obtained from Glastender within the warranty period and prior to the service being performed. Labor warranty applies to the United States and Canada only. PARTS: ithin one year from date of installation, or months from date of factory shipment, whichever occurs sooner, Glastender, Inc. will replace any part or assembly found defective under normal use and service. Field replacement parts include a warranty of 90 days from date of installation. All self-contained refrigeration models include a -year compressor warranty. A warranty claim form MUST accompany all returned defective parts or assemblies. This form MUST be completed in full. Failure to do so may result in delay or denial of credit. Any defective part or assembly must be returned to Glastender, Inc., Saginaw, Michigan, with all transportation and delivery charges prepaid. arranty repairs or replacements will be shipped FOB factory in Saginaw, Michigan. The warranty does not cover equipment subjected to accidents, freight damage, alterations, improper power and/or plumbing hookups, improper chemical use, general misuse, or lack of routine required maintenance as determined by Glastender, Inc. No representative, distributor, dealer, or any other person is authorized to modify this warranty. This warranty replaces all other written or verbal warranties. NOTE: Glastender, Inc. s policy of constant quality improvement means that prices, specifications, and policies are subject to change without notice. Questions regarding this warranty should be directed to Glastender s Customer Service Representative. 0/0/07 IMPORTANT!! Attention Refrigeration Service Companies Please review the important warranty information on this page. If you believe a service call should be covered by the factory, please call the factory for authorization between 8AM and PM EST, Monday through Friday. 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
Installation Introduction This manual describes the operational features of Mug Froster/Plate Chiller models MF, MF6, and MF8. Please review this information before attempting installation and operation. Long term, trouble-free service will follow if good housekeeping and maintenance procedures are followed. Thank you for selecting Glastender, Inc. products. Utility Requirements and Connections Electrical: Plumbing: Volt AC, Phase, 60 Hz, 6.7 Full Load Amps. A separate Amp circuit is recommended. A 6-foot grounded cord is included. None required. Automatic condensate evaporator is included. Uncrating and Start-Up Instructions All Mug Frosters and Plate Chiller models are shipped in one carton. These steps should be followed:. If legs or casters are included, bolt them to the base with the bolts provided.. Unwrap power cord from base.. Position Mug Froster/Plate Chiller and level and/or seal as required (see page ).. Install shelves.. Plug into volt AC outlet. 6. Load with mugs, glasses, plates, etc. 7. Your Glastender Mug Froster/Plate Chiller is now ready for use. Sealing Mug Froster and Plate Chiller Base to Floor To comply with NSF & health codes. The Mug Froster base must be sealed to the floor using NSF listed sealant. Place a bead of sealant along outer edges of the base and remove excess with disposable towel. 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
Operation Operation and Cleaning The Mug Froster/Plate Chiller is designed to chill mugs, glasses, plates, etc. that will appear frosted when removed. The operating temperature range of 0 F (-8 C) to F ( C). The Mug Froster/Plate Chiller should be filled with dry, room-temperature mugs, glasses, plates, etc. to allow maximum chilling. During business hours, the Mug Froster/Plate Chiller can be loaded with additional dry, room-temperature mugs, glasses, plates, etc. Allow 0 minutes for chilling. The Mug Froster/Plate Chiller includes an automatic defrost system. Defrosting will occur every six hours for approximately 0 minutes. During the defrost cycle, the fan inside the Mug Froster/Plate Chiller will turn off and a small amount of mist may appear if the top is opened. There is also a manual defrost system controlled by a switch located on the front left bottom of the Mug Froster/Plate Chiller. This is used when there is ice or snow accumulation inside. An end-of-the-day or weekly schedule can be established for the activation of this manual defrost cycle. hen the manual defrost switch is pushed, a light will turn on and the Mug Froster/Plate Chiller will go into a six-hour defrost. After six hours, the Mug Froster/Plate Chiller will resume normal operation. If the manual defrost switch is accidentally pushed, the defrost cycle can be terminated by unplugging the power cord for three seconds. Cleaning Instructions Cleaning is essential to sustaining the integrity of your equipment and preventing corrosion. ESTIMATED CLEANING TIME: to 0 minutes per unit daily, 0 minutes quarterly FREQUENCY: Daily cleaning of exterior & door gaskets. Quarterly cleaning of interior, including shelves. PROCEDURE:. A non-chlorine based cleaner or mild detergent and warm water applied with a soft cloth or sponge to all contact surfaces.. Immediately rinse off cleaning agent(s), using clean warm water, clean soft cloth or sponge.. Dry with a soft clean cloth, removing standing water as soon as possible. NOTES:. Never use hydrochloric acid, wire brushes, steel wool, scrapers, or chlorine based cleaners on stainless steel surfaces, since they will break down the passivity layer and allow corrosion to occur.. On stainless steel surfaces, you may use a soft bristle brush or Scotch-Brite pad for more stubborn stains. Always scrub with the direction of the grain. Follow with a thorough cleaning as described above.. Deposits from food preparation must be properly removed. Even hard water deposits will rust stainless steel, if not removed.. Repeated cleaning may dry up black-vinyl-clad steel (exterior) surfaces of the cooler. Armor All or similar product can bring back the shine. Apply the product to a cloth and then rub into the surface, rather than spraying it directly onto the black-vinyl-clad surface.. The cooler door gaskets are most often overlooked when cleaning. Failure to clean them regularly will lead to premature failure, since alcohol and moisture build-up breaks down the gasket material. 6. Mug frosters have a manual defrost timer switch on the front near the bottom, which will activate a 6-hour defrost cycle. Depressing the switch before you close for the evening will remove excess frost build-up on the interior liner. This procedure should be done as often as is necessary. It should also be done the night before the quarterly interior cleaning. 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
Electrical Electrical and Refrigeration Specifications Design Model refrigerant Pressure (L-to-R length) Electrical Type Charge High Low, 6, 8 V, Ph., 60 Hz., 6.7 Amp R0A 8.oz. 0 7 iring Diagram P P 7 A BL B O O LEGEND NEUTRAL POER GROUND VOLT AMP. SERVICE RECOMMENDED B P M R 8 BR 9 OPENS ABOVE + F 6 B = Black BL = Blue BR = Brown O = Orange R = Red P = Purple = hite /R = hite / Red B /R 7 ELECTRICAL RATINGS 0 P P V, Single Phase, 60Hz, wire. All wires are 6 Gauge Compressor Condensing Unit Fan Motor Evaporator Fan Motor TOTAL AMPS.90 AMP.9 AMP.8 AMP 6.67 P COMPRESSOR IRING ITEM DESCRIPTION PART # B 6 HR. MANUAL DEFROST LIGHT 070007 EVAPORATOR FAN RELAY 0700066 EVAPORATOR FAN 0600 TEMPERATURE CONTROL 0700076 S COMPRESSOR, TECUMSEH 070007 C M 6 CONDENSER FAN MOTOR 06009 M 7 AUTOMATIC DEFROST 060097 8 DEFROST THERMOSTAT 070006 6 9 DEFROST HEATER 0700069 0 MANUAL DEFROST SITCH 070007 6 6 HR. MANUAL DEFROST 070006 OVERLOAD 070008 START RELAY 0700068 CAPACITOR 060080 CONDENSER FAN BLADE 07000 6 EVAPORATOR FAN BLADE 0900098 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
Compressor and Condenser Related Parts 0 6 7 8 0 8 7 8 6 9 9 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
Compressor and Condenser Related Parts Part No. Old Part No. Description Price 070008 GT-060 Condensing Unit, Complete, R0A Aspera $900.00 060069 GT-06 Condensing Unit, Complete, R0A Tecumseh 980.00 070007 GT-0008 / HP Aspera compressor, R0A 0.00. 07000 GT-00 Start capacitor for / HP R0A Aspera compressor.00. 060067 GT-0 Relay for / HP R0A Aspera compressor.00. 070007 Overload protector for R0 Aspera compressor.00. 070007 GT-006 / HP Tecumseh compressor, R0A (after /00) 7.00. 060080 GT-006 Start capacitor for / HP R0A Tecumseh compressor 0.00 0700068 GT-0 Relay for / HP R0A Tecumseh compressor 8.00 070008 GT-007 Overload protector for / HP R0A Tecumseh compressor.00 6. 06009 GT-0 Condenser fan motor, 6 9.00 7. 0600 GT-0 Bracket, condenser fan motor mounting.00 8. 07000 GT-080 Fan blade, condenser, blade 0.00 9. 0700079 GT-07 Nut, fan blade mounting.00 0. 07000 GT-00 Fan shroud, condenser.00. 060008 Filter dryer with service port.00. 06008 GT-00 Suction line accumulator 0.00. 08000078 GT-0607 Condenser coil.00. 070000 GT-0806 Pan, condensate, MF, MF6 and MF8 (after 998) 70.00. 0700060 GT-0800 Pan, condensate, MF6 and MF8 (prior to 998) 6.00 6. 08000 GT-08006 Pan, condensate, MF (prior to 998) 60.00 7. 070007 GT-0807 icking material, consists of - / x 6 pieces,.00 MF, 6 & 8 (after 998) 8. 07000 GT-080 icking material, consists of 9 pieces, MF6 & MF8.00 (prior to 998) 9. 07000 GT-080 icking material, consists to pieces, MF.00 (prior to 998) 0. 06006 GT-090 Elbow, / x / plastic barb.00. 0600 GT-076 Tubing, drain, clear plastic. / ID x /8 OD, per foot. 0600 GT-000 Condensing unit power cord 0.00 07000 GT-008 Cap tube (60 x.06) - all models 0.00 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com 6
Evaporator and Related Parts Part No. Old Part No. Description Price. 070000 GT-0 Bracket, evaporator fan motor $.00. 07000 GT-06 Temperature control mounting bracket, prior to SN 0080N 0.00. 07000 GT-00 Evaporator fan box back, prior to SN 0080N.00 070006 Cover, evaporator back, SN 0080N and after.00. 0700080 Evaporator coil replacement kit 80.00. 0900098 GT-080 Fan blade, evaporator, blade.00 6. 0700076 Temperature control, includes knob 0.00 7. 070006 GT-0 Defrost sensor 6.00 8. 0700069 GT-070 Defrost heater 60.00 9. 0600 GT-007 Fan motor, evaporator.00 0. 070008 GT-0600 Cover, front, evaporator, MF, MF6, prior to SN 0080N.00 070008 GT-060 Cover, front, evaporator, MF8, prior to SN 0080N.00 070006 Cover, front, evaporator, MF, MF6, MF8, SN 0080N and after.00 070008 GT-060 Cover, bottom, evaporator, MF, MF6, prior to SN 0080N.00 0700060 Cover, bottom, evaporator, MF, MF6, SN 0080N and after.00 070008 GT-060 Cover, bottom, evaporator, MF8, prior to SN 0080N.00 070006 Cover, bottom, evaporator, MF8, SN 0080N and after.00. 070008 GT-070 Evaporator housing, prior to SN 0080N 60.00 070006 Drain pan, evaporator MF, MF6, SN 0080N and after 60.00 0700066 Drain pan, evaporator MF8, SN 0080N and after 60.00. 06007 GT-087 0- x / thumbscrew ( required) ( req prior to SN 0080N).00 6 9 8 7 0 7 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
Electrical Components Part No. Old Part No. Description Price. 0600 GT-00 Exterior power cord, $.00 0700099 Replacement powercord assembly, 0.00 includes (06007 0000669 0600). 070006 GT-0608 Decal, control module 7.00. 060097 GT-0000 Automatic defrost.00. 070006 GT-000 Manual defrost timer (6 hr) 90.00. 00007 GT-00 Receptacle, wire, mate-n-lok.00 6. 06006 GT-00 Receptacle, 6 wire, mate-n-lok.0 7. 060009 GT-00 Receptacle, compressor.00 8. 070007 GT-00 Manual defrost switch 0.00 9. 0700066 GT-00 Evaporator fan relay 0.00 0. 070007 GT-0907 Manual defrost light, red 0.00. 0700076 GT-09 iring harness, control module 0.00. 070007 GT-079 Control module, complete,090.00 9 8 6 0 7 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com 8
Shelving and Related Parts Part No. Old Part No. Description Price. 0700000 GT-07 0 shelf bracket (MF6 = ) (MF8 = prior to SN 0080N) $6.00. 0700009 GT-08 0 shelf bracket (MF = ).00 070007 shelf bracket (MF8 = SN 0080N and after).00. 07000 GT-09 shelf bracket (MF6 = ).00. 070006 GT-00 shelf bracket (MF8 = ) 8.00. 070009 GT-00 Shelf, 9-/8 x 9-/8 [MF = (bottom), 0.00 MF6 = (bottom), MF8 = (bottom)] 6. 0700060 GT-00 Shelf, 9-/6 x 9-/8 [MF = (middle),.00 MF6 = (middle), MF8 = (middle)] 7. 070008 GT-000 Shelf, x 9-/8 [MF8 = (bottom)].00 8. 070006 GT-007 Shelf, 9-/6 x -/8 0.00 [MF = (top), MF6 = (top), MF8 = (top)] 9. 070006 GT-008 Shelf, x 9-/8 [MF6 = (bottom, middle, top), 0.00 MF8 = (middle, top)] 0. 06007 GT-087 0/ x / thumbscrew.00 Complete Shelf Kits 07000 GT-0698 Complete shelf kit for MF (includes: - 070009, 80.00-0700060, - 070006) 07000 GT-0699 Complete shelf kit for MF6 (includes: - 070009, 00.00-0700060, - 070006, - 070006) 07000 GT-0690 Complete shelf kit for MF8 (includes: - 070009,.00-0700060, - 070008, - 070006, - 070006) 0 9-/8 9-/6 9-/6 9-/8 9-/8 9-/8 9-/8 -/8 070009 0700060 070008 070006 070006 MF = MF6 = MF8 = MF = MF6 = MF8 = MF = 0 MF6 = 0 MF8 = MF = MF6 = MF8 = 6 7 8 9 MF = 0 MF6 = MF8 = 9 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
Doors, Tops, and Related Parts Part No. Old Part No. Description Price 070009 GT-0 Gasket, wiper, top, -/ long $0.00. 070000 GT-0 Gasket, wiper, 6 top, -/ long.00 07000 GT-06 Sliding door,, MF 0.00 (for permanent breaker strip models, 99 only) 07000 GT-06 Sliding door, 0-/6, MF 6.00 070006 GT-06 Sliding door,, MF6 80.00 (for permanent breaker strip models, 99 only). 07000 GT-066 Sliding door, -/6, MF6 9.00 07000 GT-08 Top, MF 6.00. 07000 GT-08 Top, MF6 9.00 07000 GT-08 Top, MF8.00 070008 GT-087 Breaker strip, and 8 sliding door opening, pieces.00. 070009 GT-088 Breaker strip, 6 sliding door opening, pieces.00 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com 0
Refrigeration Compartment Covers Part No. Old Part No. Description Price 0700086 GT-060 Front, black vinyl-clad, MF $.00 0700087 GT-0606 Front, stainless steel, MF 8.00 0700088 GT-0607 Front, black vinyl-clad, MF6.00 0700089 GT-0608 Front, stainless steel, MF6 7.00. 0700090 GT-0609 Front, black vinyl-clad, MF8.00 070009 GT-060 Front, stainless steel, MF8 96.00 070009 GT-06 Back, black vinyl-clad, MF 0.00 070009 GT-06 Back, stainless steel, MF 80.00 070009 GT-06 Back, black vinyl-clad, MF6 0.00 070009 GT-06 Back, stainless steel, MF6 00.00. 0700096 GT-06 Back, black vinyl-clad, MF8.00 0700097 GT-066 Back, stainless steel, MF8 96.00. 0700098 GT-067 Side, left, black vinyl-clad, all models 0.00 0700099 GT-068 Side, left, stainless steel, all models 80.00. 0700000 GT-069 Side, right, black vinyl-clad, all models 0.00 070000 GT-060 Side, right, stainless steel, all models 80.00 Front view Front view Rear view Model MF8 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
0 Volt Electrical Parts Part No. Description Price 06008 Compressor, / HP, 0/0Hz, R0A $0.00 060079 Start capacitor, for / HP R0A compressor, 0/0Hz.00 060079 Relay, compressor, / HP, 0V/0Hz, R0A 0.00 060079 Overload for / HP R0A compressor, 0/0Hz.00 0600 Motor, condenser fan, 9 watt, 0V 0/60 Hz 0.00 06008 Motor, evaporator fan, 0V 0.00 0700070 Defrost heater, 0V 8.00 060098 Defrost timer, automatic, 0V, 0 cycle.00 070007 Defrost timer, manual, 0V, 0 cycle, 6 hour.00 00009 Light, power, green, 0 VAC 6.00 0700067 Relay, evaporator fan, 0V 7.0 Installation Notes Original System Installer Company: Address: City, State, Zip: Phone Number: Fax Number: Contact: 800.78.0 989.7.7 Fax 800.88.0888 / 989.7. www.glastender.com
U N P A R A L L E L E D U N D E R B A R D E S I G N & E N G I N E E R I N G Expect more more flexibility more features Glastender has the most complete line of bar equipment and the ability to manufacture custom units, giving you virtually unlimited design flexibility. Each piece of equipment is engineered with features that enhance your efficiency, ease your maintenance, and prolong the life of your investment. The flexibility you want. The features you need. Glastender. Expect more. GLASSASHERS COCKTAIL STAT IONS CO OLERS FROST ERS BEER SYST EMS