National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org MEMORANDUM To: From: NFPA Technical on Laser Fire Protection Kimberly Shea, Project Administrator Date: July 30, 2014 Subject: NFPA 115 First Draft TC FINAL (F2015) According to the final ballot results, all ballot items received the necessary affirmative votes to pass ballot. 11 Members Eligible to Vote 4 (Bainbridge, Capostagno, Custer, Umstadter) 7 Affirmative on All Revisions 0 Affrimatuve with Comment on one or more Revisions 0 Negative on one or more Revisions s on one or more Revisions There are two criteria necessary for each first/second revision to pass ballot: (1) simple majority and (2) affirmative 2 / 3 vote. The mock examples below show how the calculations are determined. (1) Example for Simple Majority: Assuming there are 20 vote eligible committee members, 11 affirmative votes are required to pass ballot. (Sample calculation: 20 members eligible to vote 2 = 10 + 1 = 11) (2) Example for Affirmative 2 / 3 : Assuming there are 20 vote eligible committee members and 1 member did not return their ballot and 2 members abstained, the number of affirmative votes required would be 12. (Sample calculation: 20 members eligble to vote 1 not returned 2 abstentions = 17 x 0.66 = 11.22 = 12 ) As always please feel free to contact me if you have any questions.
of 39 7/30/2014 10:17 AM First Revision No. 20-NFPA 115-2014 [ Global Input ] Please update all references to "Joint Commission on Accreditation of Healthcare Organizations (JCAHO) documents" to "The Joint Commission documents". Submitter Full Name: Michael Beady Submittal Date: Mon Jun 02 09:59:12 EDT 2014 : Update to coincide with change in FR 2 4
of 39 7/30/2014 10:17 AM First Revision No. 1-NFPA 115-2014 [ Section No. 2.2 ] 2.2 NFPA Publications. National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. NFPA 10, Standard for Portable Fire Extinguishers, 2010 2013 edition. NFPA 13, Standard for the Installation of Sprinkler Systems, 2010 2016 edition. NFPA 30, Flammable and Combustible Liquids Code, 2012 2015 edition. NFPA 55, Compressed Gases and Cryogenic Fluids Code, 2010 2015 edition. NFPA 70, National Electrical Code, 2011 2014 edition. NFPA 99, Health Care Facilities Code, 2012 2015 edition. NFPA 101, Life Safety Code, 2012 2015 edition. NFPA 600, Standard on Industrial Fire Brigades, 2010 2015 edition. NFPA 704, Standard System for the Identification of the Hazards of Materials for Emergency Response, 2012 edition. Submittal Date: Fri May 16 15:14:54 EDT 2014 Response Message: In accordance with the Manual of Style, the NFPA referenced publications have been updated to the latest editions. 4
First Revision No. 2-NFPA 115-2014 [ Section No. 2.3 ] 2.3 Other Publications. 2.3.1 ANSI Publications. Laser Institute of America, Secretariat of ANSI Z136, 13501 Ingenuity Drive, Suite 128, Orlando, FL 32826 (www.laserinstitute.org) ANSI B57.1, Compressed Gas Cylinder Valve Outlet and Inlet Connections, 1994. (Replaced by CGA V-1.) ANSI Z136.1, Safe Use of Lasers, 2000 2014. ANSI Z136.3, Safe Use of Lasers in Health Care Facilities, 1998 2011. ANSI Z136.5, Safe Use of Lasers in Educational Institutions, 2000 2009. 2.3.2 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM D 5 D5, Standard Test Method for Penetration of Bituminous Materials, June 1, 2006 2013. ASTM D 4359 D4359, Standard Test for Determining Whether a Material Is a Liquid or a Solid, 1999 2012. 2.3.3 CGA Publications. Compressed Gas Association, 4221 Walney Road, 5th Floor, Chantilly, VA 20151-2923. CGA V-1, Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connections, 2005 2013. (Replaces ANSI B57.1.) 2.3.4 IEC Publications. Available from American National Standards Institute, 25 West 43rd Street, 4th floor, New York, NY 10036, U.S. National for the IEC (www.ansi.org). IEC 60825-1, Ed 1.2: 2001-08, Safety of laser products Part 1: Equipment classification, requirements and user's guide., Ed 1.2, 2007-03. 2.3.5 U.S. Government Publications. U.S. Government Printing Office, Superintendent of Documents, Washington, DC 20402. OSHA Instruction Pub 8-1.7, Guidelines for Laser Safety and Hazard Assessment, August 5, 1991. Title 21, Code of Federal Regulations, Part 1040, Chapter 1, Performance Standards for Light Emitting Products, April 1, 1994. Title 21, Code of Federal Regulations, Parts 1040.10 and 1040.11, April 1, 1994 2013. Title 29, Code of Federal Regulations, Part 1910.38(b)(4)(i). Title 40, Code of Federal Regulations. Title 49, Code of Federal Regulations. 2.3.6 Other Publications. The Joint Commission on Accreditation of Healthcare Organizations (JCAHO) documents. Merriam-Webster's Collegiate Dictionary, 11th edition, Merriam-Webster, Inc., Springfield, MA, 2003. Global FR-20 Hide Deleted of 39 7/30/2014 10:17 AM
of 39 7/30/2014 10:17 AM Submittal Date: Fri May 16 15:20:41 EDT 2014 In accordance with the Manual of Style, referenced publications need to be updated to the latest edition. 4
of 39 7/30/2014 10:17 AM First Revision No. 11-NFPA 115-2014 [ Section No. 2.4 ] 2.4 References for Extracts in Mandatory Sections. NFPA 30, Flammable and Combustible Liquids Code, 2012 2015 edition. NFPA 53, Recommended Practice on Materials, Equipment, and Systems Used in Oxygen-Enriched Atmospheres, 2011 2016 edition. NFPA 59A, Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG), 2009 2016 edition. NFPA 99, Health Care Facilities Code, 2012 2015 edition. NFPA 306, Standard for the Control of Gas Hazards on Vessels, 2009 2014 edition. NFPA 600, Standard on Industrial Facility Fire Brigades, 2010 2015 edition. NFPA 921, Guide for Fire and Explosion Investigations, 2011 2014 edition. Submittal Date: Tue May 20 10:27:10 EDT 2014 Response Message: In accordance with the Manual of Style, the NFPA References for Extracts have been updated to the latest editions. 4
of 39 7/30/2014 10:17 AM First Revision No. 12-NFPA 115-2014 [ Section No. 3.3.10.2 ] 3.3.10.2 Flammable Gas. Any substance that exists in the gaseous state at normal atmospheric temperature and pressure and is capable of being ignited and burned when mixed with the proper proportion of air, oxygen, or other oxidizers. [99,2012 2015 ] Submittal Date: Tue May 20 10:32:53 EDT 2014 Updated the extract to the latest published edition in accordance with the NFPA Manual of Style. 4
of 39 7/30/2014 10:17 AM First Revision No. 13-NFPA 115-2014 [ Section No. 3.3.11 ] 3.3.11* Hazardous Chemical. A chemical with one or more of the following hazard ratings as defined in NFPA 704, Standard System for the Identification of the Hazards of Materials for Emergency Response : Health 2, 3, or 4; Flammability 2, 3, or 4; Reactivity 2, 3, or 4. [ 99, 2012] Submittal Date: Tue May 20 10:40:36 EDT 2014 Response Message: Removed the reference and brackets from this definition as the the source documents for this definition in the NFPA Glossary of Terms include NFPA 99 and NFPA 318. Both NFPA 99 and NFPA 318 are currently in cycle and have removed the definition from their standards. 4
1 of 39 7/30/2014 10:17 AM First Revision No. 14-NFPA 115-2014 [ Section No. 3.3.12 ] 3.3.12 Industrial Facility Fire Brigade. An organized group of employees within an industrial occupancy at a facility who are knowledgeable, trained, and skilled in at least basic fire-fighting operations, and whose full-time occupation might or might not be the provision of fire suppression and related activities for their employer. [600,2010 2015 ] Submittal Date: Tue May 20 10:43:38 EDT 2014 Updated the extract to the latest published edition in accordance with the NFPA Manual of Style. 4
2 of 39 7/30/2014 10:17 AM First Revision No. 15-NFPA 115-2014 [ Section No. 3.3.14 ] 3.3.14* Joule. The preferred SI unit of heat, energy, or work. A joule is the heat produced when one ampere is passed through a resistance of one ohm for one second, or it is the work required to move a distance of one meter against a force of one newton. There are 4.184 joules in a calorie, and 1055 joules in a British thermal unit (Btu). A watt is a joule/second. [921,2011 2014 ] Supplemental Information File Name FR_15_A.3.3.14_edited.docx Description Submittal Date: Tue May 20 10:45:11 EDT 2014 Updated the extract to the latest published edition in accordance with the NFPA Manual of Style. 4
4 of 39 7/30/2014 10:17 AM First Revision No. 3-NFPA 115-2014 [ New Section after 3.3.18 ] 3.3.19 Lecture Bottle. A small compressed gas cylinder with a physical volume of less than 500 cm 3. Submittal Date: Mon May 19 10:38:47 EDT 2014 Add the definition of Lecture Bottle extracted from NFPA 45, section 3.3.40. This change will add the definition of a term not defined in NFPA 115 so that readers will understand the meaning of the term. Also consideration should be given to adding a standard for "Lecture Bottles" if there is such a standard. The will suggest to NFPA 45 that they adopt this definition to keep correlation to NFPA Standards. Response Message: Public Input No. 10-NFPA 115-2014 [New Section after 3.3.18] 4
First Revision No. 16-NFPA 115-2014 [ Section No. 3.3.19 ] 3.3.20 Liquid. Any material that (1) has a fluidity greater than that of 300 penetration asphalt when tested in accordance with ASTM D 5 D5, Standard Test Method for Penetration of Bituminous Materials, or (2) is a viscous substance for which a specific melting point cannot be determined but that is determined to be a liquid in accordance with ASTM D 4359 D4359, Standard Test for Determining Whether a Material Is a Liquid or a Solid. [30,, 2012 2015 ] 3.3.20.1 Combustible Liquid. Any liquid that has a closed-cup flash point at or above 37.8 C (100 F). [306,2009 2014 ] 3.3.20.1.1 Combustible Liquid, Class II. Any liquid that has a flash point at or above 100 F (37.8 C) and below 140 F (60 C). [30:4.3.2] 3.3.20.1.2 Combustible Liquid, Class IIIA. Any liquid that has a flash point at or above 140 F (60 C), but below 200 F (93 C). [30:4.3.2] 3.3.20.1.3 Combustible Liquid, Class IIIB. Any liquid that has a flash point at or above 200 F (93 C). [30:4.3.2] 3.3.20.2 Flammable Liquid. A liquid that has a closed-cup flash point that is below 37.8 C (100 F) and a maximum vapor pressure of 2068 mm Hg (40 psia absolute pressure of 40 psi ) at 37.8 C (100 F) 3.3.20.2.1 Flammable Liquid Class I. Any liquid that has a closed-cup flash point below 37.8 C (100 F) and a Reid vapor pressure not exceeding 2068.6 mm Hg (40 psia absolute pressure of 40 psi ) at 37.8 C (100 F). 3.3.20.2.2 Flammable Liquid Class IA. Any liquid that has a flash point below 22.8 C (73 F) and a boiling point below 37.8 C (100 F). 3.3.20.2.3 Flammable Liquid Class IB. Any liquid that has a flash point below 22.8 C (73 F) and a boiling point at or above 37.8 C (100 F). 3.3.20.2.4 Flammable Liquid Class IC. Any liquid that has a flash point at or above 22.8 C (73 F), but below 37.8 C (100 F). 3.3.20.3 Ignitible Liquid. Any liquid or the liquid phase of any material that is capable of fueling a fire, including a flammable liquid, combustible liquid, or any other material that can be liquefied and burn. Submittal Date: Tue May 20 10:48:03 EDT 2014 In accordance with the Manual of Style, the NFPA extract has been updated to the latest edition. 6 of 39 7/30/2014 10:17 AM
7 of 39 7/30/2014 10:17 AM 4
8 of 39 7/30/2014 10:17 AM First Revision No. 19-NFPA 115-2014 [ Section No. 3.3.22 ] 3.3.23* Maximum Allowable Working Pressure (MAWP). The maximum gauge pressure permissible at the top of completed equipment, a container, or a vessel in its operating position for a design temperature. [59A,, 2009 2016 ] Submittal Date: Tue May 20 10:57:33 EDT 2014 Response Message: Updated the definition with the acronym that is being added to NFPA 59A. Also updated the extract to the latest published edition in accordance with the NFPA Manual of Style. 4
9 of 39 7/30/2014 10:17 AM First Revision No. 17-NFPA 115-2014 [ Section No. 3.3.26 ] 3.3.27 Oxygen-Enriched Atmosphere (OEA). An atmosphere in which the concentration of oxygen exceeds 21 percent by volume or its partial pressure exceeds 21.3 kpa (160 torr). [53, 2011 2016 ] Submittal Date: Tue May 20 10:54:50 EDT 2014 Updated the extract to the latest published edition in accordance with the NFPA Manual of Style. 4
0 of 39 7/30/2014 10:17 AM First Revision No. 18-NFPA 115-2014 [ Section No. 3.3.35 ] 3.3.36 Watt (W). Unit of power, or rate of work, equal to one joule per second, or the rate of work represented by a current of one ampere under the potential of one volt. [921,2011 2014 ] Submittal Date: Tue May 20 10:55:31 EDT 2014 Updated the extract to the latest published edition in accordance with the NFPA Manual of Style. 4
1 of 39 7/30/2014 10:17 AM First Revision No. 6-NFPA 115-2014 [ Section No. 6.1 ] 6.1 General. Before a laser is used, the beam intensity profile and alignment shall be determined verified, the appropriate beam stop materials shall be in place, and the facility, control measures, safety, and training programs shall be established, using in accordance with ANSI Z136.1, Safe Use of Lasers. Submittal Date: Mon May 19 11:28:14 EDT 2014 Section 6.2.2 has been removed. A reference to source intensity profiles has been removed from this section. 4
2 of 39 7/30/2014 10:17 AM First Revision No. 4-NFPA 115-2014 [ Section No. 6.2.1 ] 6.2.1 Beam Alignment. If an alignment beam is present, proper coincidence with the treatment beam shall be verified before each use in accordance with the manufacturer s recommendations. Submittal Date: Mon May 19 10:59:17 EDT 2014 Response Message: Based on the type of laser, verification can vary and in order to account for all types of lasers, it is best to go back to the manufacturer's specifications. Public Input No. 6-NFPA 115-2013 [Section No. 6.2.1] 4
3 of 39 7/30/2014 10:17 AM First Revision No. 5-NFPA 115-2014 [ Section No. 6.2.2 ] 6.2.2 Beam Intensity Profile. If the laser has been determined to be a beam ignition hazard, the intensity profile shall be determined before each use. Submittal Date: Mon May 19 11:24:37 EDT 2014 Response Message: The laser intensity profile has no safety impact, but is a quality issue. Taking this measurement is not something that is typically performed in the field. Public Input No. 5-NFPA 115-2013 [Section No. 6.2.2] 4
4 of 39 7/30/2014 10:17 AM First Revision No. 7-NFPA 115-2014 [ Section No. 7.5.4.1 ] 7.5.4.1 Degradation of components that lead to a fire shall be monitored according to parameters that shall include one or more of the following: (1) Component temperature (2) Device electrical parameters (current, voltage) (3) Laser power (4) Frequency or magnitude of power excursions (5) Light leakage or scatter Submittal Date: Mon May 19 11:37:54 EDT 2014 : Light leakage or scatter is a source of degradation that should be addressed in this list. Public Input No. 4-NFPA 115-2013 [Section No. 7.5.4.1] 4
6 of 39 7/30/2014 10:17 AM First Revision No. 8-NFPA 115-2014 [ Section No. 7.6.3 ] 7.6.3 Laser system users and service staff shall be trained on the laser system fire safety features and procedures for responding to fire emergencies prior to the laser system s user s first use and at least once per year thereafter shall continue ongoing training in accordance with ANSI Z136.1, Safe Use of Lasers. Submittal Date: Mon May 19 11:56:59 EDT 2014 : Ongoing training has been changed to correspond with ANSI standards. Public Input No. 3-NFPA 115-2013 [Section No. 7.6.3] 4
7 of 39 7/30/2014 10:17 AM First Revision No. 9-NFPA 115-2014 [ Section No. 9.2.8 ] 9.2.8 No modifications shall be made to pressure containers or pressure relief devices except as authorized by anyone except the supplier. Submittal Date: Mon May 19 12:12:02 EDT 2014 : This revision clarifies the intent of allowing modifications where permitted by the supplier. Public Input No. 1-NFPA 115-2013 [Section No. 9.2.8] 4
8 of 39 7/30/2014 10:17 AM First Revision No. 21-NFPA 115-2014 [ Section No. 11.1.1 ] 11.1.1 Lasers. Global FR-20 Hide Deleted Lasers and laser systems shall be operated and maintained in accordance with the following documents: (1) ANSI Z136.1, Safe Use of Lasers, revised (2) ANSI Z136.3, Safe Use of Lasers in Health Care Facilities (3) Occupational Safety and Health Administration (OSHA) Instruction Pub 8-1.7 (4) NFPA 99, pertaining to electrical systems, electrical equipment, gas and vacuum systems, and gas equipment (5) The Joint Commission on Accreditation of Healthcare Organizations (JCAHO) documents (6) State rules and standards Submitter Full Name: Jacqueline Wilmot Organization: National Fire Protection Assoc Submittal Date: Thu Jun 19 17:10:06 EDT 2014 4 In accordance with the Manual of Style, referenced publications need to be updated to the latest edition.
0 of 39 7/30/2014 10:17 AM First Revision No. 10-NFPA 115-2014 [ Section No. 11.4.3 ] 11.4.3 Training records shall be maintained by the LSO The LSO shall ensure the necessary training records are maintained. Submittal Date: Mon May 19 12:20:45 EDT 2014 : This change aligns with the ANSI Z136.1 standard currently referenced. Public Input No. 2-NFPA 115-2013 [Section No. 11.4.3] 4
1 of 39 7/30/2014 10:17 AM First Revision No. 26-NFPA 115-2014 [ Section No. E.1 ] E.1 The following text is extracted from the 2012 2015 edition of NFPA 30. Flash point is a direct measure of a liquid s ability to emit flammable vapors. The lower the flash point, the greater the risk of fire. Flash point is determined using one of several different test procedures and apparatus that are specified in Section 4.4 of NFPA 30. A liquid that has a flash point at or below ambient temperature is easy to ignite and will burn quickly. On ignition, the spread of flame over the surface of such a liquid will be rapid, because it is not necessary for the fire to expend energy heating the liquid to generate more vapor. Gasoline is a familiar example. A liquid with a flash point above ambient temperature presents less risk because it must be heated to generate enough vapor to become ignitible; it is more difficult to ignite and presents less potential for the generation and spread of vapor. A common example is home heating oil (Fuel Oil No. 2). Home heating oil must be atomized to a fine mist in order for it to be easily ignited. Certain solutions of liquids in water exhibit a flash point using the standard closed-cup test procedures but will not burn and could even extinguish a fire. To assist identifying such solutions, the following standards are helpful: (1) ASTM D 4207 D4207, Standard Test Method for Sustained Burning of Low Viscosity Liquid Mixtures by the Wick Test (2) ASTM D 4206 D4206, Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus Liquid mixtures that do not sustain combustion for a specified time at a specified temperature are considered to be noncombustible. The tests described in the references listed in (1) and (2) provide additional data for determining proper storage and handling of such mixtures. In a confined space, such mixtures could still create an ignitible vapor air mixture, depending on the amount of flammable liquid in the mixture and the quantity of the spill. Related to the flash point is the fire point. The fire point of a liquid is the temperature at which ignition of vapors will result in continued burning. As the term flash point suggests, the vapors generated at that temperature will flash but will not necessarily continue to burn. The difference between flash point and fire point has some significance when conducting flash point tests [see 9.1.4 of NFPA 30 for references to ASTM D 92 D92, Standard Test Method for Flash and Fire Points by Cleveland Open Cup, and 49 CFR (U.S. Department of Transportation Hazardous Materials Regulations), Method of Testing for Sustained Combustibility]. However, a closed-cup flash point is used to classify the liquid and characterize its hazard. For more information, see ASTM E 502 E502, Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods, and the ASTM Manual on Flash Point Standards and Their Use. Submitter Full Name: Michael Beady Submittal Date: Fri Jun 20 12:27:30 EDT 2014 : Updated edition year of NFPA 30
2 of 39 7/30/2014 10:17 AM 4
3 of 39 7/30/2014 10:17 AM First Revision No. 22-NFPA 115-2014 [ Section No. F.1.1 ] F.1.1 NFPA Publications. National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. NFPA 30, Flammable and Combustible Liquids Code, 2012 2015 edition. NFPA 55, Compressed Gases and Cryogenic Fluids Code, 2010 201 6 edition. NFPA 70, National Electrical Code, 2011 2014 edition. NFPA 220, Standard on Types of Building Construction, 2012 2015 edition. NFPA Fire Protection Guide to Hazardous Materials, 14th edition, 2010. NFPA Fire Protection Handbook, 20th edition, 2008. Submitter Full Name: Jacqueline Wilmot Organization: National Fire Protection Assoc Submittal Date: Thu Jun 19 17:15:02 EDT 2014 In accordance with the Manual of Style, referenced publications need to be updated to the latest edition. 4
First Revision No. 23-NFPA 115-2014 [ Section No. F.1.2 ] F.1.2 Other Publications. F.1.2.1 ANSI Publications. American National Standards Institute, Inc., 25 West 43rd Street, 4th Floor, New York, NY 10036. ANSI Z136.1, Safe Use of Lasers, 2000 2014. F.1.2.2 ASME Publications. American Society of Mechanical Engineers, Three Two Park Avenue, New York, NY 10016-5990. Boiler and Pressure Vessel Code, 1992 2013. F.1.2.3 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM D 92 D92, Standard Test Method for Flash and Fire Points by Cleveland Open Cup, July 1, 2005 2012. ASTM D 4206 D4206, Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus, 2001 2013. ASTM D 4207 D4207, Standard Test Method for Sustained Burning of Low Viscosity Liquid Mixtures by the Wick Test, 1991 2012. ASTM E 136 E136, Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C, 1993 2012. ASTM E 502 E502, Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods, 2000 2013. ASTM E 1354 E1354, Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter, 2003 2013. ASTM STP 882 STP822, Quintiere, J. G., and Harkleroad, M. T., New Concepts for Measuring Flame Spread Properties, Fire Safety: Science and Engineering, pp. 239 269, 1985. ASTM Manual on Flash Point Standards and Their Use, 1992. F.1.2.4 IEC Publications. International Electrotechnical Commission. Available from American National Standards Institute, 25 West 43rd Street, 4th Floor, New York, NY 10036, U.S. National for the IEC (www.ansi.org). IEC 60825-1, Ed. 1.2: 2001-8 2007-3, Safety of laser products Part 1: Equipment classification, requirements and user's guide. F.1.2.5 NIST Publications. National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899-1070. NSBIR 81-2271, Babrauskas, V., Will the Second Item Ignite? 1982. F.1.2.6 U.S. Government Publications. U.S. Government Printing Office, Washington, DC 20402. Title 21, Code of Federal Regulations, Part 1040, Performance standards for light-emitting products. Title 49, Code of Federal Regulations. F.1.2.7 Additional Publications. Bauman, N., Laser Drape Fires: How Much of a Risk? Laser Medicine & Surgery, News & Advances, Vol. 7, No. 4, August 1989. Submitter Full Name: Jacqueline Wilmot Organization: National Fire Protection Assoc 5 of 39 7/30/2014 10:17 AM
6 of 39 7/30/2014 10:17 AM Submittal Date: Thu Jun 19 17:16:20 EDT 2014 In accordance with the Manual of Style, referenced publications need to be updated to the latest edition. 4
7 of 39 7/30/2014 10:17 AM First Revision No. 24-NFPA 115-2014 [ Section No. F.2.1 ] F.2.1 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM D 56, D56 Standard Test Method for Flash Point by the Tag Closed Tester,2002 2010. ASTM D 93 D93, Standard Test Method for Flash Point by the Pensky-Martens Closed Tester,2002 2013. ASTM D 3278 D3278, Standard Test Methods for Flash Point of Liquids by Setaflash Small Scale Closed-Cup Apparatus,1996 2004. ASTM D 3828 D3828, Standard Test Methods for Flash Point by Small Scale Closed Tester,2002 2012. Submitter Full Name: Jacqueline Wilmot Organization: National Fire Protection Assoc Submittal Date: Thu Jun 19 17:19:12 EDT 2014 In accordance with the Manual of Style, referenced publications need to be updated to the latest edition. 4
9 of 39 7/30/2014 10:17 AM First Revision No. 25-NFPA 115-2014 [ Section No. F.3 ] F.3 References for Extracts in Informational Sections. NFPA 30, Flammable and Combustible Liquids Code, 2012 2015 edition. Submitter Full Name: Jacqueline Wilmot Organization: National Fire Protection Assoc Submittal Date: Thu Jun 19 17:20:05 EDT 2014 In accordance with the Manual of Style, referenced publications need to be updated to the latest edition. 4