Job: Item No. Mobile Heated Cabinet Heavy duty heated holding/transport cabinet for use with 12 X 20 pans. All stainless steel construction Fully insulated Cabinets fully framed all vertical and horizontal edges Caster mounting plates fully welded to cabinet framing Caster mounting plates 6 x 6 x 5/16 steel plate drilled and tapped All hardware mounted through framing Door framed, insulated and gasketed Door louvered with adjustable damper Top mounted control panel 60 to 230 degree temperature range Armor Heat system 5 caster standard Low power requirements Pan guides permanently mounted Accommodates 12 x 20 pans in 2, 4 or 6 depth Accommodates 1/2 and 1/3 size pans (NOTE: except C12D2) Models C5D2 C9D2 C12D2 C12UPD2 C16D2 C9D2 shown Made in USA Toll Free 800-733-8073 Local 317-831-7030 Fax 317-831-7036
MODEL # CAPACITY 12 x 20-2 1/2 pans WIDTH DIM A DEPTH DIM B HEIGHT DIM C VOLTAGE WATTAGE AMPERAGE SHIP WEIGHT C5D2 10 36 3/4 29 35 5/16 120 1000 8.33 346 C9D2 18 36 3/4 29 45 1/16 120 1000 8.33 415 C12D2 24 52 3/4 34 37 13/16 120 1500 12.5 441 C12UPD2 24 36 3/4 29 54 3/16 120 1980 16.5 490 C16D2 32 36 3/4 29 65 13/16 120 1980 16.5 530 GENERAL: Cabinet constructed throughout with stainless steel. All double wall construction insulated with high density fiberglass insulation. All exterior surfaces shall be ground and polished to a #4 finish. INTERNAL FRAME: All vertical and horizontal edges framed with a combination of 1 1/2 x 1 1/2 x 1/8 and 1 x 1 x 1/8 angle steel, arc welded, cross braced and reinforced at all corners. BASE FRAME: 1/8 formed steel base. Base shall have, four 6 x 6 x 5/16, steel plates drilled and tapped to accommodate 5, 6 or 8 casters. The plates are fully welded to frame on all four sides. INNER CABINETS: Inner cabinets shall be all 24 gauge 300 series. Stainless steel inner cabinet shall have permanently mounted pan rails. Rails shall accommodate 12 x 20 x 2 1/2 pans or multiples of 4 and 6 pans. Cabinet will also accommodate 1/2 and 1/3 pans. Inner cabinet fully insulated with high density fiberglass; 2 on sides and back, 4 on top and bottom. Inner cabinet shall be heated by the Armor Heat system. There shall be two inner cabinets. DOORS: Door shall be all 20 gauge stainless steel. Door shall have full interior frame constructed of 3/4 x 3/4 14 gauge galvanized steel angle. Doors shall be fully insulated and gasketed. Doors shall have an exterior louver with an interior damper for moisture control. All door hardware shall be secured through framing in cabinet and door. Door shall have a heavy-duty positive and magnetic door latch and heavy-duty refrigeration type door hinges. ELECTRICAL CHARACTERISTICS: Cabinets shall have 2 top mounted control panels consisting of an on/off switch, with power indicator light, and electronic control with digital temperature display. Each cabinet shall be heated by a 120 volt 60 cycle 1 single phase heating system. Cabinets shall come complete with a permanently mounted 8 cord with a Nema #5-15P plug. Top of cabinet is removable for easy access to controls. Models C12UPD2 & C16D2 use Nema #5-20P. CASTERS: Cabinet shall have 4 heavy duty 5 casters, 2- rigid and 2-swivel casters mounted to 6 x 6 x 5/16 steel plate drilled and tapped. Accessories, Options, Variations Pass-thru doors Left hand hinged doors Alternate rail spacing Vertically mounted push handles Heavy duty casters, 5 or 8 Exterior edges protected with 1 x 1 x 1/8 stainless steel angle Flush mounted heavy duty paddle latch Heavy duty transport latch that will accept a padlock, 12 gauge stainless steel Stainless steel perforated shelves Dutch doors Sterno adapter Lexan doors Stainless steel adjustable legs Heavy duty perimeter bumper systems Tamper proof fasteners Control panel cover, lockable Stainless steel welded door hinges 800-733-8073 Local 317-831-7030 Fax 317-831-7036 REV 2016-11
Job: Item No. Mobile Heated Cabinet Designed to accommodate 12 x 20 pans All stainless steel construction Fully insulated Cabinet is fully framed all vertical and horizontal edges Caster mounting plates fully welded to cabinet framing Caster mounting plates 6 x 6 x 5/16 steel plate drilled and tapped All hardware mounted through framing Door framed, insulated and gasketed Door louvered with adjustable damper Top mounted control panel 60 to 230 degree temperature range Armor Heat system 5 casters standard Low power requirements Pan guides permanently mounted Accommodates 12 x 20 pans in 2, 4 or 6 depth Accommodates 1/2 and 1/3 size pans C5, C9, come complete with four sidelift handles C5, C9, available with removable dolly Models C5 C9 C12UP C16 C9 shown Made in USA Toll Free 800-733-8073 Local 317-831-7030 Fax 317-831-7036
MODEL # CAPACITY 12 x 20-2 1/2 pans WIDTH DIM A DEPTH DIM B HEIGHT DIM C VOLTAGE WATTAGE AMPERAGE SHIP WEIGHT C5 5 19 1/2 29 35 5/16 120 500 4.16 SS-160 C9 9 19 1/2 29 45 1/16 120 500 4.16 SS-280 C12UP 12 19 1/2 29 54 3/16 120 900 8.25 300 C16 16 19 1/2 29 65 13/16 120 900 8.25 355 GENERAL: Cabinet constructed throughout with stainless steel. All double wall construction, insulated with high density fiberglass insulation. All exterior surfaces shall be ground and polished to a #4 finish. INTERNAL FRAME: All vertical and horizontal edges framed with a combination of 1 1/2 x 1 1/2 x 1/8 angle steel, arc welded, cross braced and reinforced at all corners. BASE FRAME: 1/8 formed steel base. Base shall have, four 6 x 6 x 5/16, steel plates drilled and tapped to accommodate 5, 6 or 8 casters. The plates are fully welded to frame on all four sides. INNER CABINETS: Inner cabinets shall be all 24 gauge 300 series. Stainless steel inner cabinet shall have permanently mounted pan rails. Rails shall accommodate 12 x 20 x 2 1/2 pans or multiples of 4 and 6 pans. Cabinet will also accommodate 1/2 and 1/3 size pans. Inner cabinet fully insulated with high density fiberglass; 2 on sides and back, 4 on top and bottom. Inner cabinet shall be heated by the Armor Heat system. DOORS: Door shall be all 20 gauge stainless steel. Door shall have full interior frame constructed of 3/4 x 3/4 14 gauge galvanized angle steel. Door shall be fully insulated and gasketed. Doors shall have an exterior louver with an interior damper for moisture control. All door hardware shall be secured through framing in cabinet and door. Door shall have a heavy-duty positive and magnetic door latch and heavy duty refrigeration type door hinges. ELECTRICAL CHARACTERISTICS: Cabinets shall have a top mounted control panel consisting of an on/off switch with power indicator light, and electronic control with digital temperature display. Cabinet shall be heated by a 120 volt, 60 cycle, 1 phase heating system. Cabinets shall come complete with a permanently mounted 8 cord with a Nema #5-15P plug. Top of cabinet is removable for easy access to controls. CASTERS: Cabinet shall come complete with 4-5 casters, 2-rigid and 2-swivel casters mounted to 6 x 6 x 5/16 steel plate drilled and tapped. Accessories, Options, Variations Pass-thru doors Left hand hinged doors Alternate rail spacing Vertically mounted push handles Choice of heavy-duty casters, 5 x 2, 6 & 8 Exterior edges protected with 1 x 1 x 1/8 stainless steel angle Flush mounted heavy duty paddle latch Heavy duty transport latch that will accept a padlock, 12 gauge stainless steel Stainless steel perforated shelves Side mount gravity latch Dutch doors Cord reel Sterno adapter Lexan door Stainless steel adjustable legs Heavy duty bumper system Tamper proof fasteners Control panel cover, lockable Heavy duty perimeter bumper Dolly with casters for C5 800-733-8073 Local 317-831-7030 Fax 317-831-7036 REV 2016-11
Job: Item No. Mobile Heated Cabinet Mobile heated cabinets for heavy duty transporting. Universal angles for 12 x 20 pans and/or 18 x 26 trays. Special height (60 ) permits you to see over the top 8 semi-pneumatic casters to move over any surface. All casters have brakes. All swivel casters to get into the tightest corner Universal angles will hold sheet pans and steam pans securely in transport Capacity of 250 lbs per bracket Angle steel framed door has adjustable damper Magnetic/mechanical latch for positive closing Capacity of cabinet is 22 (12 x 20 x 2 1/2 ) pans or multiples of 4 and 6 and/or 11 (18 x 26 ) trays All welded angle steel frame Three heavy-duty hinges to ensure the door will always close correctly Door has 8 1/2 X 11 card holder 11 gauge stainless steel transport latch for long distance moving/security Heavy-duty chrome plated steel push handles Heavy-duty bumper system, with additional support for loading assistance Efficient Armor Heat system draws only 8.6 amps for use anywhere Temperature ranges from 60 to 230 degrees Model Road Warrior Made in USA Toll Free 800-733-8073 Local 317-831-7030 Fax 317-831-7036
MODEL # M11UA RW Road Warrior CAPACITY 18 x 26 trays - 2 1/2 pans WIDTH DIM A DEPTH DIM B HEIGHT DIM C WATTAGE AMPERAGE SHIP WEIGHT 11 sets U/A 28 1/2 38 60 1/16 990 8.25 530 GENERAL: Cabinet constructed throughout with stainless steel. All double wall construction insulated with high density fiberglass insulation. All exterior surfaces shall be ground and polished to a #4 finish. Cabinet comes complete with heavy-duty push handles, cord wrap, bumper with T bar, transport latch on door, card holder on door and 8 casters. INTERNAL FRAME: All vertical and horizontal edges framed with a combination of 1 1/2 x 1 1/2 x 1/8 angle steel, arc welded, cross braced and reinforced at all corners. BASE FRAME: 1/8 formed steel base. Base shall have, four 6 x 6 x 5/16, steel plates drilled and tapped to accommodate 5, 6 or 8 casters. The plates are fully welded to frame on all four sides. INNER CABINET: Inner cabinet shall be all 24 gauge 300 series stainless steel. Universal angles constructed of heavy gauge wire and vertical and horizontal 11 gauge flat stock. Each pair shall accommodate 250 lbs. Chrome plated with heavy nickel and a clear coat. Angles adjustable on 1 1/2 centers. Holding posts removable for cleaning. Angles will accommodate 2 (12 x 20 ) pans or 1 (18 x 26 ) tray or 2 (14 x 18 ) trays. DOOR: Door shall be all 20 gauge stainless steel. Door shall have full interior frame constructed of 3/4 x 3/4 16 gauge galvanized angle steel. Door shall be fully insulated and gasketed. Door shall have an exterior louver with an interior damper for moisture control. All door hardware shall be secured through framing in cabinet and door. Door have 8 1/2 x 11 card holder. Door shall have a heavy duty positive and magnetic door latch and heavy duty refrigeration type door hinges. Doors shall have 11 gauge stainless steel transport latch that will accept a padlock. ELECTRICAL CHARACTERISTICS: Cabinet shall have a top mounted control panel consisting of an on and off switch with power indicator light, electronic temperature controller and digital temperature display. Each cabinet shall be heated by a 120 volt 60 cycle 1 phase Armor Heat system. Cabinet shall come complete with a permanently mounted 8 cord with a Nema #5-15P plug and cord wrap. Top of cabinet is removable for easy access to controls. CASTERS: Cabinet shall have 4 heavy duty 8 casters, 4 swivel casters with brakes mounted to 6 x 6 x 5/16 steel plate drilled and tapped. Cabinet shall have a full wrap around rubber bumper. Bumper frame shall be 1/8 formed steel plate with aluminum cover, with bumper channels welded and riveted to bumper frame. Bumper frame is secured to bottom of the cabinet with 1/4 screws. Accessories, Options, Variations Left hand hinged doors Choice of heavy duty casters, 5 x 2, 6 & 8 Cord reel Sterno adapter Tamper-proof fasteners Control panel cover, lockable Stainless steel welded door hinge STANDARD Heavy duty push handle Heavy duty 8 casters Heavy duty transport latch Cord Wrap 800-733-8073 Local 317-831-7030 Fax 317-831-7036 REV 2016-11
Job: Item No. Mobile Heated Cabinet Heavy Duty transport cabinets with universal tray slides for use with 12 x 20 pans and 18 x 26 trays. Models M11UA9 M11UA12 M11UA16 Stainless steel interior and exterior Fully insulated Cabinet is fully framed all vertical and horizontal edges Caster mounting plates fully welded to cabinet framing Caster mounting plates 6 x 6 steel plate drilled and tapped All hardware mounted through framing Door framed, insulated and gasketed Door louvered with adjustable damper Top mounted control 60 to 230 degree temperature range Armor Heat system 5 casters standard Low power requirements Universal angles accommodate 250 lbs per pair Universal angles adjustable on 1 1/2 centers Universal angles will accommodate 2 (12 x 20 ) pans. 1 (18 x 26 ) or 2 (14 X 18 ) trays M11UA16 shown with optional perimeter bumper Universal angles designed to minimize pan/tray movement during transport Universal angle posts removable for cleaning Made in USA Toll Free 800-733-8073 Local 317-831-7030 Fax 317-831-7036
MODEL # CAPACITY 18 x26 trays - 2 1/2 pans WIDTH DIM A DEPTH DIM B HEIGHT DIM C VOLTAGE WATTAGE AMPERAGE SHIP WEIGHT M11UA9 9 sets UA brackets 25 1/2" 35 1/2 53 120 990 8.25 410 M11UA12 12 sets UA brackets 25 1/2 35 1/2 71 3/16 120 990 8.25 450 M11UA16 16 sets UA brackets 25 1/2 35 1/2 71 3/16 120 990 8.25 500 GENERAL: Cabinet constructed with stainless steel interior and exterior. All double wall construction, insulated with 2 high density fiberglass insulation on the top, sides, door and bottom. All exterior surfaces shall be ground and polished to a #4 finish. INTERNAL FRAME: All vertical and horizontal edges framed with 1 1/2 x 1 1/2 x 1/8 angle steel, arc welded, cross braced and reinforced at all corners. BASE FRAME: 1/8 formed steel base. Base shall have, four 6 x 6 x 5/16, steel plates drilled and tapped to accommodate 5 or 8 casters. The plates are fully welded to frame on all four sides. INNER CABINET: Inner cabinets shall be all 24 gauge 300 series stainless steel. Universal angles constructed of heavy gauge wire, vertical and horizontal 11 gauge flat stock. Each pair shall accommodate 250 lbs. Universal angles are chrome plated with heavy nickel and a clear coat. Angles adjustable on 1 1/2 centers. Angles will accommodate 2 (12 x 20 ) pans or 1 (18 x 20 ) tray or 2 (14 x 18 ) trays. DOOR: Doors shall be all 20 gauge stainless steel. Door shall have full interior frame constructed of 3/4 x 3/4 14 gauge galvanized angle steel. Doors shall be fully insulated and gasketed. Doors shall have an exterior louver with an interior damper for moisture control. All door hardware shall be secured through framing in cabinet and door. Doors shall have a heavy duty positive and magnetic door latch and heavy duty refrigeration type door hinges. ELECTRICAL CHARACTERISTICS: Cabinets shall have a top mounted control panel consisting of an on/off switch with power indicator light and electronic control with digital temperature display. Each cabinet shall be heated by a 120 volt 60 cycle 1 phase Armor Heat system. Cabinets shall come complete with a permanently mounted 8 cord with a Nema #5-15P plug. Top of cabinet is removable for easy access to controls. CASTERS: Cabinet shall have 4 heavy duty 5 casters, 2 rigid and 2 swivel casters mounted to 6 x 6 x 5/16 steel plate drilled and tapped. Accessories, Options, Variations Pass-thru doors Left hand hinged doors Vertically mounted push handles Heavy duty casters, 5 or 8 Exterior edges protected with 1 x 1 x 1/8 stainless steel angle Flush mounted heavy duty paddle latch Heavy duty transport latch that will accept a padlock, 12 gauge stainless steel Stainless steel perforated shelves Side mount gravity latch Dutch doors Cord reel Sterno adapter Lexan door Stainless steel adjustable legs Heavy duty bumper system Tamper proof fasteners Control panel cover, lockable Continuous 12 gauge stainless steel welded door hinge Additional Universal slides 800-733-8073 Local 317-831-7030 Fax 317-831-7036 REV 2016-11
Job: Item No. Mobile Heated Cabinet Heavy Duty transport cabinets with universal tray slides for use with 12 X 20 pans and 18 X 26 pans. Model M11UA4UC M11UA6 Stainless Steel interior and exterior Fully insulated Cabinet is fully framed all vertical and horizontal edges Caster mounting plates fully welded to cabinet framing Caster mounting plates 6 x 6 x 5/16 steel plate drilled and tapped All hardware mounted through framing Door framed, insulated and gasketed Door louvered with adjustable damper Top mounted electronic control with digital display 60 to 230 degrees temperature range Armor Heat system 5 casters standard Low power requirements Universal angles accommodate 250 lbs per pair Universal angles adjustable on 1 1/2 centers Universal angles will accommodate 2 (12 x 20 ) pans. 1 (18 x 26 ) or 2 (14 X 18 ) trays Universal angles designed to minimize pan/tray movement during transport Universal angle posts removable for cleaning M11UA6 shown Made in USA Toll Free 800-733-8073 Local 317-831-7030 Fax 317-831-7036
MODEL # CAPACITY 18 x 26 trays - 2 1/2 pans WIDTH DIM A DEPTH DIM B HEIGHT DIM C VOLTAGE WATTAGE AMPERAGE SHIP WEIGHT M11UA4UC 4 sets UA brackets 25 1/2 34 1/2 34 120 750 6.25 300 M11UA6 6 sets UA brackets 25 1/2 34 1/2 45 13/16 120 750 6.25 400 GENERAL: Cabinet constructed with stainless steel interior and exterior. All double wall construction, insulated with 2 high density fiberglass insulation top, sides,door and bottom. All exterior surfaces shall be ground and polished to #4 finish. INTERNAL FRAME: All vertical and horizontal edges framed with a 1 1/2 x 1 1/2 x 1/8 angle steel, arc welded, cross braced and reinforced at all corners. BASE FRAME: 1/8 formed steel base. Base shall have, four 6 x 6 x 5/16, steel plates drilled and tapped to accommodate 5 or 8 casters. The plates are fully welded to frame on all four sides. INNER CABINETS: Inner cabinets shall be all 24 gauge 300 series stainless steel. Universal angles constructed of heavy gauge wire and vertical and horizontal 11 gauge flat stock. Each pair shall accommodate 250 lbs. Universal angles are chrome plated with heavy nickel and a clear coat. Angles adjustable on 1 1/2 centers. Angles will accommodate 2 (12 x 20 ) pans or 1 (18 x 20 ) tray or 2 (14 x 18 ) trays. DOORS: Doors shall be all 20 gauge stainless steel. Door shall have full interior frame constructed of 3/4 x 3/4 14 gauge galvanized steel angle. Doors shall be fully insulated and gasketed. Doors shall have an exterior louver with an interior damper for moisture control. All door hardware shall be secured through framing in cabinet and door. Doors shall have a heavy duty positive and magnetic door latch and heavy duty refrigeration type door hinges. ELECTRICAL CHARACTERISTICS: Cabinets shall have a top mounted control panel consisting of an on/off switch with power indicator light and electronic controller with digital temperature. Each cabinet shall be heated by a 120 volt, 60 cycle, 1 single, Armor Heat system. Cabinets shall come complete with a permanently mounted 8 cord with a Nema #5-15P plug. Top of cabinet is removable for easy access to controls. CASTERS: Cabinet shall have 4 heavy duty 5 casters, 2 rigid and 2 swivel casters mounted to 6 x 6 x 5/16 steel plate drilled and tapped. Accessories, Options, Variations Pass-thru doors Left hand hinged doors Vertically mounted push handles Heavy duty casters, 5 or 8 Exterior edges protected with 1 x 1 x 1/8 stainless steel angle Flush mounted heavy duty paddle latch Heavy duty transport latch that will accept a padlock, 12 gauge stainless steel Stainless steel perforated shelves Side mount gravity latch Sterno adapter Lexan door Stainless steel adjustable legs Heavy duty bumper system Tamper proof fasteners Control panel cover, lockable 800-733-8073 Local 317-831-7030 Fax 317-831-7036 REV 2016-11
Job: Item No. Super Hold Cabinet Designed to accommodate 18 x 26 trays and/or 12 x 20 pans Model SH14UA Stainless steel interior and exterior Fully insulated Cabinet is fully framed all vertical and horizontal edges Caster mounting plates fully welded to cabinet base Caster mounting plates 6 x 6 x 5/16 steel plate drilled and tapped All hardware mounted through framing Door framed, insulated and gasketed Door louvered with adjustable damper Top mounted control panel 60 to 230 degree temperature range Armor Heat system 5 casters standard Low power requirements Two completely separate fully insulated inner cabinets Separate controls and heating systems for each compartment Universal angles adjustable on 1 1/2 centers accommodate 250 lbs per pair Universal angles will accommodate 2 (12 x 20 ) pans or 1 (18 x 26 ) tray Universal angles chrome plated with heavy nickel and clear coat Accommodates 5 sets of universal angles per compartment Universal angle posts removable for cleaning Made in USA Toll Free 800-733-8073 Local 317-831-7030 Fax 317-831-7036
MODEL # CAPACITY WIDTH DIM A DEPTH DIM B HEIGHT DIM C VOLTAGE WATTAGE AMPERAGE SHIP WEIGHT SH14UA 10 sets - UA brackets 28 1/2 38 74 7/8 120 1480 12.33 530 GENERAL: Cabinet constructed with stainless steel, all double wall construction. Insulated with high density fiberglass insulation. All exterior surfaces shall be ground and polished to a #3 finish. INTERNAL FRAME: All vertical and horizontal edges framed with a combination of 1 1/2 x 1 1/2 x 1/8 and 1 x 1 x 1/8 angle steel, arc welded, cross braced and reinforced at all corners. BASE FRAME: 1/8 formed steel base. Base shall have, four 6 x 6 x 5/16, steel plates drilled and tapped to accommodate 5, 6 or 8 casters. The plates are fully welded to frame on all four sides. INNER CABINET: SH14 - Inner cabinet shall be all 24 gauge 300 series stainless steel. Inner cabinet shall have permanently mounted rails. Shall have universal angles constructed of heavy gauge wire, and vertical and horizontal, 11 gauge flat stock. Each pair shall accommodate 250 lbs. Universal angles are chrome plated with heavy nickel and a clear coat and adjustable on 1 1/2 centers. Holding posts removable for cleaning. Universal angles will accommodate 2 (12 x 20 ) pans per set, or 1 (18 x 26 ) tray, or 2 (14 x 18 ) trays. Inner cabinet fully insulated with high density fiberglass; 2 on sides, back, top and bottom. Cabinet shall have Armor Heat system. DOORS: Doors shall be all 20 gauge stainless steel. Door shall have full interior frame constructed of 3/4 x 3/4 14 gauge galvanized angle steel. Door shall be fully insulated and gasketed. Doors shall have an exterior louver with an interior damper for moisture control. All door hardware shall be secured through framing in cabinet and door. Door shall have a heavy-duty positive and magnetic door latch and heavy-duty refrigeration type door hinges. ELECTRICAL CHARACTERISTICS: Each cabinets shall have a top mounted control panel consisting of an on and off switch with power indicator light, electronic temperature control with digital display. Each cabinet shall be heated by a 120 volt 60 cycle 1 phase heating system. Cabinets shall come complete with a permanently mounted 8 cord with a Nema #5-15P plug. Top of cabinet is removable for easy access to controls. CASTERS: Cabinet shall have 4 heavy duty 5 casters, 2 rigid and 2 swivel casters mounted to 6 x 6 x 5/16 steel plate drilled and tapped. Accessories, Options, Variations Pass-thru doors Left hand hinged doors Vertically mounted push handles Choice of heavy-duty casters, 5 x 2, 6 & 8 Flush mounted heavy-duty paddle latch Heavy-duty transport latch that will accept a padlock, 12 gauge stainless steel Stainless steel perforated shelves Side mount gravity latch Dutch doors Cord reel Sterno adapter Lexan doors Stainless steel adjustable legs Perimeter bumper guards 800-733-8073 Local 317-831-7030 Fax 317-831-7036 REV 2016-11