Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Element Materials Technology Oil and Gas UK Limited, Trading as ccredited to No 6 Coronet Way Centenary Park Eccles Manchester M50 1RE Contact: Ms Marta Jurado Paez Tel: +44 (0)161 787 3250 Fax: +44 (0)161 787 3251 E-Mail: Marta.Jurado.Paez@exova.com Website: www.element.com Testing performed at the above address only Element Materials Technology Oil and Gas UK Limited, UKS reference, is accredited for a flexible scope that enables them to conduct accredited testing through the update of currently accredited test methods to the latest versions of those test methods, for the activities detailed below, in accordance with their documented in-house procedure E-E-OP-GE-X-SD-SOP001. details ctivity code ddress No 6 Coronet Way Centenary Park Eccles Manchester M50 1RE Local contact Ms Marta Jurado Paez Tel: +44 (0)161-787 3250 Fax: +44 (0)161-787 3251 E-Mail: Marta.Jurado.Paez@exova.com Metals & Weldments - Corrosion tests Metals & Weldments - Mechanical tests Metals & Weldments - Metallurgical tests Organic Coatings and Paints - Performance Tests Iron Pipes - Condition assessment Plastics including PE, PVC & GRP and thermoplastic liners Mechanical, Physical and Pressure tests ssessment Manager: MS5 Page 1 of 5
Schedule of ccreditation United Kingdom ccreditation Service ccredited to DETILS OF CCREDITION METLS, LLOYS and METL PRODUCTS Corrosion Tests ustenitic stainless steels Ferric chloride pitting corrosion resistance STM G48 Method Shell ES/247 Revision 2, 2003 (Withdrawn) Susceptibility to intergranular attack (excluding sensitisation heat treatment): STM 262 Practice & E BS EN ISO 3651-2 Salt spray BS 3900-F4 BS EN ISO 9227 STM B117 STM G85 nnex 5 Documented In-House Method E-E-OP-GE-CT-SD-MD015 Mechanical Tests Bend BS EN ISO 7438 STM 370 STM E190 STM E290 Hardness: Brinell (HB10/3000 and HB1/30) BS EN ISO 6506-1 STM E10 Rockwell (B and C Scales) BS EN ISO 6508-1 STM E18 STM 370 Vickers HV5, 10 & 30 BS EN ISO 6507 STM E384 Low Force Vickers HV1 BS EN ISO 6507-1 STM E384 Micro Hardness Vickers HV0.1, 0.3 & 0.5 Knoop HK0.1, 0.2 & 0.5 Micro Hardness Vickers HV0.1, 0.3 & 0.5 STM E384 BS EN ISO 6507-1 ssessment Manager: MS5 Page 2 of 5
Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS and METL PRODUCTS (cont'd) Mechanical Tests (cont'd) Impact Izod BS 131-1 Charpy V-notch Including % shear and lateral expansion BS EN ISO 148-1 STM E23 STM 370 Crystallinity BS 131-5 Tensile (forces 5 kn up to 600 kn) (ambient temperature) BS EN ISO 6892-1 BS EN 2002-1 STM E8/E8M STM 370 Weldments Bend, Fracture, Hardness, Impact, Tensile and Macroexamination in accordance with specific welding codes BS EN 287-1 BS 4871-3 BS 4872-1 BS 4872-2 BS EN ISO 9606-2 BS EN ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 4136 BS EN ISO 5173 BS EN ISO 5178 BS EN ISO 9015-1 BS EN ISO 9016 BS EN ISO 9017 BS EN ISO 17639 SME IX PI 5L PI 1104 ssessment Manager: MS5 Page 3 of 5
Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS and METL PRODUCTS (cont'd) Metallurgical Tests Depth of carburized and hardened case (micrographic method) BS 6286 BS EN ISO 2639 Depth of decarburisation (micrographic method) BS EN ISO 3887 Phase volume fraction STM E562 Shell ES/247 Revision 2:2003 (Withdrawn) Grain size BS EN ISO 643 STM E112 Inclusion Count STM E45 Method ustenite Spacing STM E112 DNV RP F112 (ppendix B) Duplex ustenitic/ferritic stainless steels Detecting detrimental intermetallic phases STM 923 Classification of third phase precipitates Documented In-House Method E-E-OP-GE-ME-SD-MD020 ORGNIC COTINGS and PINTS Performance Tests ccelerated weathering STM G154 Cathodic disbonding T/SP/CW6 Part 1 BS 3900-F11 Coating thickness BS 3900-C5 BS EN ISO 2808 STM D1186 Coating Thickness BS EN ISO 2360 mplitude-sensitive eddy current method High voltage holiday detection T/SP/CW6 Part 1 V-cut coating adhesion T/SP/CW6 Part 1 ssessment Manager: MS5 Page 4 of 5
Schedule of ccreditation United Kingdom ccreditation Service ccredited to ORGNIC COTINGS and PINTS (cont d) Performance Tests (cont d) Pull off adhesion STM D4541 Method E and F Strain polarisation T/SP/CW6 Part 1 brasion resistance STM D4060 Hot water immersion T/SP/CW6 Part 1 Flexibility T/SP/CW6 Part 1 Measurement of Specular Gloss of non-metallic paint films at 20, 60 and 85 ssessment of Degree of Blistering Exposure to Filtered Xenon arc radiation BS EN ISO 2813 BS EN ISO 4628-2 BS EN ISO 16474-1 BS EN ISO 16474-2 Colour Differences ISO 7724-3 Determination of resistance to humidity BS EN ISO 6270-2 PLSTICS including PE, PVC and GRP and thermoplastic liners Mechanical and Physical Tests Tensile Strength, Strain and Modulus BS EN ISO 527-1 BS EN ISO 527-2 BS EN ISO 527-3 BS EN ISO 527-4 METLS, LLOYS and METL PRODUCTS Physical Tests Iron Pipes Condition ssessment Document No. 9 Water Mains Rehabilitation Manual, WRC 1986 END ssessment Manager: MS5 Page 5 of 5