Product overview The security program of Wittkopp: Electronic locks Key locks Safe deposit locks works Accessories Carl Wittkopp GmbH Konrad-Zuse-Straße 5 42551 Velbert Germany Telephone +49(0)2051 9566 0 Telefax +49(0)2051 9566 66 info@carl-wittkopp.com www.carl-wittkopp.com Wittkopp - high-security locks since 1857 Carl Wittkopp GmbH - errors and omissions excepted 9999-108-0 10/2013
Mechanical locks Mechanical precision in high-security technology Wittkopp - high-security locks since 1857
2
Contents page The company 4 Key locks 5 Product overview - safe locks 8 1387 10 1609/1619 12 1629 14 1639 16 1819/1839 18 1821 20 1824 22 2608 24 2628 26 2618/2688 28 2648 30 Product overview - safe deposit locks 32 Product overview - lattice door locks 33 5106/5116 34 5347 35 5367 36 5427 37 6117/6110 38 6147/6140 39 6207 40 6317 41 Product overview - key blanks 42 key blanks for safe locks 44 key blanks for safe deposit locks 48 key blanks for lattice door locks 49 Combination lock 7800 50 3
The company The need to safeguard and protect cash and valuables has existed since time immemorial. This can be achieved only with security concepts that are worked out right down to the very last detail, applying both vast experience and innovative prowess. Wittkopp high-security locks are the answer. Our locking solutions either mechanical or electronic satisfy all the safety and security specifications put forth by the safe and vault industry. Wittkopp high-security locks have been developed and manufactured ever since 1857 in Velbert, a town long renowned for its activities in this specific branch of industry. Right down to the present day the mechanical tradition upon which Carl Wittkopp GmbH was built continues to be the basis for confidence in our products. As always, our solutions convince users whenever there is a demand for security paired with unwavering quality and long service lives. Our development standards - To your advantage Mechanical precision is based on careful development and production work. Our products, their quality certified by certification bodies, today pass through a highly modern development process. In that process our technical specialists continuously integrate the latest security industry requirements into the locks. Closeness to our custo- mers both geographically and in our ways of thinking is the wellspring for economical and reliable high-security concepts. Patented Wittkopp designs devolve from intensive communications and closeness to the customer. We don t deliver security off the rack. Instead we supply concepts tailored to your specific needs. 4
Key locks High-security key locks made by Wittkopp since 1857 are a concept of highest quality. Wittkopp s key locks have been certified to be in compliance with European Standard EN 1300 and also with guidelines issued by numerous European testing institutes. Today they are successfully used around the world in critical areas that impose the greatest possible demands in terms of security. Opening and closing - Quality by Wittkopp Whenever it is a matter of securing money and other valuables, it s not just the quality of the enclosure that is important. The opening and closing concepts are equally significant. Uniform, trouble-free mechanical operation is a function of high-quality fittings, selecting the proper materials and perfect manufacturing quality. Wittkopp s keyed locks combine all these important product criteria. Their quality is convincing and they guarantee maximum security. This is reflected in our customers continued faith in our products over the years. Wittkopp s range includes keyed locks in a multitude of different designs. Regardless of whether you need locks for safes, safe deposit boxes or lattice doors the product portfolio offers solutions for a wide variety of applications. 5
Key locks Key types Rigid key Detachable bit keys Folding key Keys Typical for mechanical locks used in safes is the double-bit key. It is synonymous with precision machining and exceptional security. Wittkopp s double-bit keys are available in various types and materials. The depth of the safe door and how often it is locked should be taken into account when selecting a key. Detachable bit keys or folding keys lend themselves to applications with thick safe doors because they are easy to store. While the detachable bit can be stored separate from the rest of the key, folding keys can be reduced to almost half of their normal length. Whenever a lock is opened and closed frequently it is highly advisable to select a red brass or nickel silver key. These materials make the keys far less prone to wear and tear. 6
Key locks Requirements for safe and vault doors Resistance grade as per EN 1143-1 as per VdS 2450 Number of locks Classification as per EN 1300 0/N 1 A 1 I 1 A 1 II 1 A 1 III 1 B 2 IV 2 B 2 V 2 B 2 VI 2 C 3 VII 2 C 3 VIII 2 C 3 IX 2 C 3 X 2 C 3 XI 3 (2) C (D) 3 (4) XII 3 (2) C (D) 3 (4) XIII 2 D 4 Classification as per VdS 2396 ing variations A crucial security criterion when employing keyed locks is the number different key profiles possible. The number of locking possibilities is derived from the number of levers in the lock and the number of notches in the key. According to standard EN 1300 (VdS 2396) the following numbers of variations are required for mechanical locking systems: Class A (1): 25,000 (80,000) Class B (2): 100,000 (200,000) Class C (3): 1,000,000 (1,000,000) 7
Product overview Safe locks Application range 1387 1609/1619 1629 1639 Hotel, small and home safes Gun cabinets Master key systems Safes VDMA A/B Safes EN 0 Safes EN I/II Safes EN III Safes EN IV/V Safes EN VI - XII Characteristics Certification EN 1300 A VdS Class 1 BSI listed EN 1300 A VdS Class 1 EN 1300 A VdS Class 1 Levers 7 9 9 9 Fixing points deviation from standard deviation from standard 3-bolt design square bolt (1609) flat bolt (1619) deviation from standard square bolt flat bolt stroke (mm) 9 12 12 12 Time delay/release left-hand left-hand left-hand Page 10 12 14 16 deviation from standard square bolt flat bolt electronic Characteristics Wittkopp s keyed locks are identified by the side on which the hinge is attached to the safe. If the hinges are on the left-hand side of the safe (looking at the door from the outside) then we refer to the lock as a left-hand lock. If, however, the hinges are on the right, it is a righthand lock. 8
1819 1821 1824 2608 2628 2618 2648 EN 1300 A VdS Class 1 IMP Class A EN 1300 B VdS Class 2 A2P Level B (E) IMP Class B DNV ECBS EN 1300 C VdS Class 3 IMP Class C BSI listed EN 1300 A VdS Class 1 A2P Niveau A (E) IMP Class A ECBS EN 1300 A VdS Class 1 A2P Niveau A (E) IMP Class A ECBS EN 1300 A VdS Class 1 A2P Niveau A (E) IMP Class A ECBS 9 11 14 8 8 8 8 EN 1300 A VdS Class 1 A2P Niveau A (E) IMP Class A ECBS standard standard standard standard standard standard standard square bolt flat bolt square bolt flat bolt square bolt flat bolt square bolt flat bolt square bolt flat bolt square bolt flat bolt 12 12 12 12 12 12 12 square bolt left-hand left-hand left-hand left-hand left-hand left-hand left-hand 18 20 22 24 26 28 30 Safe opening directions Mounting position Turn key clockwise to open Right Turn key counterclockwise to open Hinge on the left = Left-hand lock Left Hinge on the right = Right-hand lock 9
3-bolt lock 1387 Application range Hotel, small and home safes able compartments Inside safes Technical characteristics 1387-000-0 case/bolt steel, galvanized/die-cast zinc Levers 7 Fixing points deviation from standard 3-bolt design stroke (mm) 9 2 double-bit keys (mm) die-cast zinc, 53 10
Characteristics in a 3-bolt design. Ideally suited for direct locking of light duty safes and lockable compartments inside safes Options and accessories Simple installation made possible with lock mounting plate Additional anti-tampering protection with optional anti-drilling plate made of hardened manganese steel M 1:2 options left-hand mounting plate Keyed-alike lock Key removable from lock when open Key options Page 42 Die-cast zinc (mm) 65/95/120 Brass (mm) 72 Red brass (mm) 56 Steel (mm) 65 11
Safe lock 1609/1619 1609 Certification EN 1300 A VdS Class 1 BSI listed Application range Hotel, small and home safes Gun cabinets able compartments Inside safes Master-key systems VDMA A/B safes EN 0 II safes Technical characteristics 1609-000-0 case/bolt steel, galvanized Levers 9 Fixing points deviation from standard square bolt stroke (mm) 12 2 double-bit keys (mm) red brass, 56 12
1609 Characteristics Interior safe lock in a shallow design and with standard mechanism Options and accessories Simple installation made possible with lock mounting plate Vertical extension latches available in various lengths and with a variety of guide lugs actuated by master key: The master key is higher ranking and actuates every lock in the system, whereas user keys can only actuate a single lock. Certification expires M 1:3 A - 170/other lengths available on request options left-hand flat bolt (1619) mounting plate Extension latch (mm) 170/other lengths available on request Guide lugs for extension latch prepared for arrestable extension latch Keyhole cap (mm) Ø 29 x 6.5/Ø 29 x 9.5 actuated by master key - certification expires Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Brass (mm) 72/94 Nickel silver (mm) 96/150 13
Safe lock 1629 Control mechanism Standard mechanism Certification EN 1300 A VdS Class 1 Application range Hotel, small and home safes Gun cabinets VDMA A/B safes EN 0 II safes Technical characteristics 1629-000-0 case/bolt Mechanism Levers per mechanism 9 Fixing points stroke (mm) 12 2 double-bit keys each for control and standard mechanism (mm) steel, galvanized control/standard deviation from standard square bolt red brass, 56 14
Characteristics Dual-key principle: The control mechanism must be opened before it is possible to unlock the standard mechanism. The lock can then be actuated with the standard mechanism Options and accessories Simple installation made possible with lock mounting plate Vertical extension latches available in various lengths and with a variety of guide lugs M 1:3 A - 170/other lengths available on request options left-hand flat bolt mounting plate Extension latch (mm) 170/other lengths available on request Guide lugs for extension latch prepared for arrestable extension latch Keyhole cap (mm) Ø 29 x 6.5/Ø 29 x 9.5 Bushings over lock cover (mm) 3 Keyed-alike lock - certification expires Key can be removed when standard mechanism is open - certification expires Key options Page 42 Brass (mm) 72/94 Nickel silver (mm) 96/150 15
Safe lock 1639 Certification EN 1300 A VdS Class 1 Application range Hotel, small and home safes Gun cabinets VDMA A/B safes EN 0 II safes Technical characteristics 1639-000-0 Time delay electronic case/bolt steel, galvanized Levers 9 Fixing points deviation from standard square bolt stroke (mm) 12 2 double-bit keys (mm) red brass, 56 Battery compartment 1639-201-0 Battery compartment with push-button Cable length (mm) 250 Plug RJ45 Battery* 2 x 1.5 V (AA) Fastening method adhesive pad * not included in scope of delivery 16
Battery compartment A - 170/other lengths available on request Characteristics Electronic time delay and opening window period can be set manually Separate battery compartment, with push button. The time delay is initiated after the key has been turned or the button pressed Options and accessories Simple installation made possible with lock mounting plate Vertical extension latches available in various lengths and with a variety of guide lugs M 1:5 options flat bolt mounting plate Extension latch (mm) 170/other lengths available on request Guide lugs for extension latch prepared for arrestable extension latch Keyhole cap (mm) Ø 29 x 6.5/Ø 29 x 9.5 Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Brass (mm) 72/94 Nickel silver (mm) 96/150 17
Safe lock 1819/1839 Certification EN 1300 A VdS Class 1 IMP Class A Application range Hotel, small and home safes Gun cabinets Master-key systems VDMA A/B safes EN 0 II safes Technical characteristics 1819-043-0 case/bolt steel, galvanized Levers 9 Fixing points standard square bolt stroke (mm) 12 2 double-bit keys (mm) nickel silver, 96 Special model without certification 1839-000-0 case/bolt steel, galvanized Type single-bit Levers 9 Fixing points standard Square bolt with threaded holes 2 x M4 stroke (mm) 12 2 single-bit keys (mm) nickel silver, 96 18
Characteristics Series 18, designed for VdS lock security classes 1 to 3 (EN 1300 A to C) Options and accessories (1819) actuated by master key: The master key is higher ranking and actuates every lock in the system, whereas user keys can only actuate a single lock. Certification expires Special model 1839 with single-bit key, without certification, particularly suitable for retrofitting M 1:2 options left-hand flat bolt Square bolt with threaded holes 2 x M4 Keyhole cap (mm) Ø 29 x 6,5/Ø 29 x 9,5 actuated by master key - certification expires Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Die-cast zinc (mm) - only for locks 115/135/170 Brass (mm) 72/94/114 Red brass (mm) 56 Nickel silver (mm) 150 Nickel silver/steel (mm) 180/230/280/320 Nickel silver/steel (mm) - detachable bit key or folding key 150/180/230/280/320 19
Safe lock 1821 Certification EN 1300 B VdS Class 2 A2P Level B (E) IMP Class B DNV ECBS Application range Hotel, small and home safes Gun cabinets Master-key systems VDMA A/B safes; EN 0 V safes Technical characteristics 1821-000-0 case/bolt Levers 11 Fixing points stroke (mm) 12 steel, chromated/ steel, galvanized standard square bolt 2 double-bit keys (mm) nickel silver, 96 Special model without certification 1821-2 Mechanism control standard Levers 4 7 case/bolt steel, chromated/ steel, galvanized Fixing points stroke (mm) 12 2 double-bit keys each for control and standard mechanism (mm) standard square bolt nickel silver, 96 20
Characteristics Series 18, designed for VdS lock security classes 1 to 3 (EN 1300 A to C) case chromated Options and accessories actuated by master key: The master key is higher ranking and actuates every lock in the system, whereas user keys can only actuate a single lock. Certification expires M 1:2 Special model 1821-2: Control and standard lock mechanisms positioned above each other so only a single keyhole is visible. The control mechanism must be opened before it is possible to unlock the standard mechanism. The lock can then be actuated with the standard mechanism options case/bolt steel, galvanized left-hand flat bolt plate without Square bolt with threaded holes 2 x M4 Keyhole cap (mm) Ø 29 x 6,5/Ø 29 x 9,5 actuated by master key - certification expires Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Die-cast zinc (mm) - only for locks Nickel silver (mm) - lafette key Nickel silver (mm) 150 115/135/170 Nickel silver/steel (mm) 180/230/280/320 Nickel silver/steel (mm) - detachable bit key or folding key 66 150/180/230/280/320 21
Safe lock 1824 Certification EN 1300 C VdS Class 3 IMP Class C BSI listed Application range Hotel, small and home safes Gun cabinets VDMA A/B safes EN 0 XII safes Technical characteristics 1824-107-0 case/bolt Levers 14 Fixing points stroke (mm) 12 steel, chromated/ steel, galvanized standard square bolt 2 double-bit keys (mm) nickel silver, 150 22
Characteristics Series 18, designed for VdS lock security classes 1 to 3 (EN 1300 A to C) case chromated This lock guarantees over 58 million theoretical key profiles M 1:2 options left-hand flat bolt Square bolt with threaded holes 2 x M4 Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Nickel silver (mm) - lafette key 66 Nickel silver (mm) 96 Nickel silver/steel (mm) 180/230/280/320 Nickel silver/steel (mm) - detachable bit key or folding key 150/180/230/280/320 23
Wall safe lock 2608 Certification EN 1300 A VdS Class 1 A2P Niveau A (E) IMP Class A ECBS Application range Hotel, small and home safes Gun cabinets Master-key systems VDMA A/B safes EN 0 II safes Technical characteristics 2608-011-0 case/bolt cover Levers 8 Fixing points stroke (mm) 12 steel, galvanized combined mounting and anti-drilling plate, hardened manganese steel standard flat bolt - bent 2 double-bit keys (mm) die-cast zinc, 65 24
Characteristics with a bent bolt for attaching angle brackets Angle bracket available with or without riveted locking bolt cover simultaneously acts as lock mounting plate and antidrilling plate which means that the lock can be welded straight to the door M 1:3 A - 142/182/232/other lengths available on request L - 120/320 LB - 100/300 Options and accessories actuated by master key: The master key is higher ranking and actuates every lock in the system, whereas user keys can only actuate a single lock. Certification expires. Suited for master key-systems up to 50 safe boxes options left-hand cover without anti-drilling plate flat bolt - straight/square bolt Angle (mm) 120/320 Stud (mm) Ø 18 x 25/Ø 20 x 25/Ø 25 x 25 Extension latch (mm) 142/182/232/ other lengths available on request Guide lugs for extension latch prepared for extension latch actuated by master key - certification expires Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Die-cast zinc (mm) 95/120 Brass (mm) 72/94/114 Red brass (mm) 56 Nickel silver (mm) 96 25
Modular lock 2628 Certification EN 1300 A VdS Class 1 A2P Niveau A (E) IMP Class A ECBS Application range Hotel, small and home safes Gun cabinets VDMA A/B safes EN 0 II safes Technical characteristics 2628-001-0 case/bolt cover cassette Levers 8 Fixing points stroke (mm) 12 steel, galvanized combined mounting and anti-drilling plate, hardened manganese steel replaceable standard flat bolt - with angle, 120 mm 2 double-bit keys (mm) die-cast zinc, 65 26
Characteristics Replaceable lock cassette provides flexibility and security. If the key is lost only the lock cassette and not the entire lock has to be replaced cassette easy to replace: Just loosen 4 screws. Congruity between threaded bushes and drill holes in casing is guaranteed M 1:3 A - 142/182/232/other lengths available on request L - 120/320 LB - 100/300 options left-hand cover without anti-drilling plate Angle (mm) 320 Stud (mm) Ø 18 x 25/Ø 20 x 25/Ø 25 x 25 Extension latch (mm) 142/182/232/ other lengths available on request Guide lugs for extension latch prepared for extension latch Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Die-cast zinc (mm) 95/120 Brass (mm) 72/94/114 Red brass (mm) 56 Nickel silver (mm) 96 cover simultaneously acts as lock mounting plate and antidrilling plate which means the lock can be welded straight to the door 27
Safe lock 2618 Certification EN 1300 A VdS Class 1 A2P Niveau A (E) IMP Class A ECBS Application range Hotel, small and home safes Gun cabinets Master-key systems VDMA A/B safes EN 0 II safes Technical characteristics 2618-000-0 case/bolt steel, galvanized Levers 8 Fixing points standard square bolt stroke (mm) 12 2 double-bit keys (mm) die-cast zinc, 95 28
Characteristics case and bolt glavanized steel be used in a variety of applications Options and accessories actuated by master key: The master key is higher ranking and actuates every lock in the system, whereas user keys can only actuate a single lock. Certification expires. Suited for master key-systems up to 50 safe boxes M 1:2 options left-hand flat bolt Square bolt with threaded holes 2 x M4 extension to the rear Elongated key pin (mm) 10 Bushings over lock cover (mm) 3 actuated by master key - certification expires Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Die-cast zinc (mm) 65/120/145/160 Brass (mm) 72/94/114 Red brass (mm) 56 Nickel silver (mm) 96/150 Nickel silver/steel (mm) 180/230/280/320 Nickel silver/steel (mm) - detachable bit key or folding key 150/180/230/280/320 29
Optima 2648 Certification EN 1300 A VdS Class 1 A2P Niveau A (E) IMP Class A ECBS Application range Hotel, small and home safes Gun cabinets Master-key systems VDMA A/B safes EN 0 II safes Technical characteristics 2648-000-0 case/bolt die-cast zinc Levers 8 Fixing points standard square bolt stroke (mm) 12 2 double-bit keys (mm) die-cast zinc, 95 30
Characteristics case and bolt made of diecast zinc Untold number of applications Options and accessories actuated by master key: The master key is higher ranking and actuates every lock in the system, whereas user keys can only actuate a single lock. Certification expires. Suited for master key-systems up to 50 safe boxes M 1:2 options left-hand square bolt, solid, nickel-plated Square bolt with threaded holes 2 x M4 Elongated key pin (mm) 10 actuated by master key - certification expires Keyed-alike lock - certification expires Key removable from lock when open - certification expires Key options Page 42 Die-cast zinc (mm) 65/120/145/160 Brass (mm) 72/94/114 Red brass (mm) 56 Nickel silver (mm) 96/150 Nickel silver/steel (mm) 180/230/280/320 Nickel silver/steel (mm) - detachable bit key or folding key 150/180/230/280/320 31
Product overview Safe deposit locks Characteristics Levers 5106 5116 5347 5367 5427 6 6 bank 4 client 7 bank 4 client 7 bank 5 client 7 mechanical mechanical electronic Activation mechanical flat bolt flat bolt square bolt square bolt square bolt stroke (mm) 7.5 7.5 10 10 10 Key single-bit single-bit double-bit double-bit double-bit Page 34 34 35 36 37 Characteristics Opening direction of strongbox Wittkopp s safe deposit locks are identified by the side on which the hinge of the strongbox is attached. If the hinges are on the side of the safe deposit box (looking at the door from the outside) then we refer to the lock as a lock. Turn key clockwise to open Hinge on the right = Right-hand lock Hinge on the right = Right-hand lock 32
Product overview Lattice door locks Characteristics 6117 6110 6147 6140 6207 6317 DIN left-hand DIN left-hand DIN left-hand DIN left-hand Type single-bit prepared for profile cylinder single-bit prepared for profile cylinder DIN left-hand/ single-bit ing mechanism 1 1 1 2 Levers 7 7 7 Pin measurement (mm) 69.5 69.5 69.5 69.5 70 69.5 Face plate (mm) 260 x 30 x 4, round 260 x 30 x 4, round 260 x 30 x 4, round 260 x 30 x 4, round 184 x 30 x 4, round latch bolt latch bolt latch bolt latch bolt hook bolt DIN left-hand single-bit 7 per locking mechanism 260 x 30 x 4, round square bolt latch bolt Turns double-turn double-turn double-turn double-turn double-turn double-turn bolt follower follower Page 38 38 39 39 40 41 Opening directions Definition of opening direction for doors and locks as determined by the DIN 107 Opening directions DIN left-hand DIN Left-hand Right-hand 33
Letter box lock 5106/5116 5106 M 1:1 Application range Letter boxes Characteristics for letter boxes, made of steel (5106) or plastic (5116), actuated with single-bit key Technical characteristics 5106-000-0 case/bolt steel, galvanized/die-cast zinc Levers 6 flat bolt stroke (mm) 7.5 2 single-bit keys with box number (mm) die-cast zinc, 56 options case plastic, black (5116) flat bolt - cranked Key options Page 46 Single-bit key without box number 34
Safe deposit lock 5347 M 1:3 Application range Deposit boxes Characteristics Bank and client lock mechanisms positioned above each other so only a single keyhole is visible Dual-key principle: The bank s lock must be opened first. Then the client can insert his key Technical characteristics 5347-009-0 Mechanism bank client Levers 4 7 When lock open case/bolt stroke (mm) 10 key removable steel, survace treated/ die-cast zinc square bolt 2 client double-bit keys with box number (mm) die-cast zinc, 62 Key options Page 46 Client double-bit key Bank double-bit key (mm) steel, 65 without box number key not removable 35
Safe deposit lock 5367 M 1:2 Application range Deposit boxes Characteristics Bank and client lock mechanisms positioned above each other so only a single keyhole is visible Dual-key principle: The bank s lock must be opened first. Then the client can insert his key Technical characteristics 5367-000-0 Mechanism bank client Levers 4 7 When lock open case/bolt stroke (mm) 10 key removable key not removable steel, galvanized/die-cast zinc square bolt 2 client double-bit keys with box number (mm) die-cast zinc, 62 Key options Page 46 Client double-bit key Bank double-bit key (mm) steel, 65 without box number 36
Safe deposit lock 5427 M 1:3 Application range Deposit boxes Characteristics Safe deposit lock with electronic release Dual-actuation principle: The bank s locking mechanism is released electronically by the central control system. Only then is it possible for the client to unlock the box with his or her key In an emergency, e.g. power outage, the bank s mechanism can be pre-locked mechanically with the bank s key Power supplied via a bolt contact Key retention provides protection against manipulation: Client s key cannot be removed unless the deposit box has been locked Technical characteristics 5427-003-0 Mechanism bank client Levers 5 7 When lock open Release Release solenoid Power supply case/bolt stroke (mm) 10 key removable electronic/ mechanical key not removable mechanical 370 ohms, 12 volts: 100% duty cycle bolt contact steel, black finished/ die-cast zinc square bolt with key retainer 2 client double-bit keys with box number (mm) die-cast zinc, 53 options Power supply two-conductor cable, 150 mm Microswitch bolt position indicator Key options Page 46 Client double-bit key without box number Bank double-bit key (mm) steel, 65 37
Lattice door locks 6117/6110 6117 : M 1:4 Application range Lattice doors, e.g. those protecting the entrances to deposit boxes Characteristics Mortise lock with blockable latch, single-bit model Two-turn opening operation: First turn unlocks the latch, second turn retracts the latch Example of how lock can be employed - Days: Only the latch is active - Nights: Latch is blocked, bolt is barred (15 mm excursion) Technical characteristics 6117-000-0 case/bolt/face plate Type Levers 7 steel, nickel-plated DIN left-hand single-bit Pin measurement (mm) 69.5 Face plate (mm) Turns Excursion (mm) 15 260 x 30 x 4, round latch bolt double-turn 2 single-bit keys (mm) steel, 75 options Type 6110 Door opener Emergency door release DIN prepared for profile cylinder prepared for electronic door opener pin to open door from the inside 38
Lattice door locks 6147/6140 6147 : M 1:4 Application range Lattice doors, e.g. those protecting the entrances to safe deposit boxes Characteristics Mortise lock with blockable latch, single-bit model Two-turn opening operation: First turn unlocks the latch Second turn retracts the latch Example of how lock can be employed - Days: Only the latch is active. Latch is moved by actuating the door handle - Nights: Latch is blocked, bolt is barred (15 mm excursion) Technical characteristics 6147-000-0 case/bolt/face plate steel, nickel-plated DIN left-hand Type single-bit Levers 7 Pin measurement (mm) 69.5 Face plate (mm) 260 x 30 x 4, round latch bolt Turns double-turn Follower (mm) 8, square Excursion (mm) 15 2 single-bit keys (mm) steel, 75 options DIN Type 6140 prepared for profile cylinder 39
Lattice door lock 6207 5116 M 1:4 Application range Lattice doors, e.g. those protecting the entrances to deposit boxes Characteristics Mortise lock with blockable hook latch, single-bit model Two-turn opening operation: First turn raises the hook, second turn retracts the hook Example of how lock can be employed - Days: Only the hook is active - Nights: Hook is blocked Technical characteristics 6207-000-0 case/bolt/face plate steel, nickel-plated DIN left-hand/ Type single-bit Levers 7 Pin measurement (mm) 70 Face plate (mm) 184 x 30 x 4, round hook bolt Turns double-turn 2 single-bit keys (mm) steel, 75 40
Lattice door lock 6317 M 1:4 Application range Lattice doors, e.g. those protecting the entrances to deposit boxes Characteristics Mortise lock with square bolt and blockable latch bolt, single-bit model Two-turn bolt release operation: First turn 11.5 mm excursion, second turn 23.5 mm excursion Two-turn latch opening operation: First turn unlocks the latch, second turn retracts the latch Example of how lock can be employed - Days: Only the latch is active - Nights: Square bolt and latch blocked Technical characteristics 6317-000-0 case/bolt/face plate Type ing mechanisms 2 Levers steel, nickel-plated DIN left-hand single-bit Pin measurement (mm) 69.5 Face plate (mm) Turns 7 per locking mechanism 260 x 30 x 4, round square bolt/latch bolt double-turn Excursion square bolt (mm) 11.5/23.5 Excursion latch bolt (mm) 15 2 single-bit keys (mm) steel, 75 options Door opener DIN prepared for electric door opener 41
Product overview Key blanks Material Die-cast zinc Safe locks Page 8 Length (mm) 53 56 62 65 95 115 120 135 145 160 Rigid key blanks 1387 1609/1619/1629/1639 1819 1821 1824 2608/2628 2618/2648/2688 Part number 8202 8230 8231 8232 8255 8247 8252 8248 8249 Blanks for detachable bit keys 1819/1821/1824 2618/2648/2688 Safe deposit locks Page 32 Lattice door locks Page 33 Part number Blanks for folding keys 1819/1821/1824 2618/2648/2688 Part number Rigid key blanks 5106/5116 5347/5367 5427 Part number 8227 8104 8224 Rigid key blanks 6117/6147/6207 6317 Part number Rigid key bit depth hole for key guiding pin slot stem bow bit height bolt step 42
Red Brass Nickel silver Nickel silver/steel Steel brass 170 72 94 114 56 66 96 150 180 230 280 320 65 75 8253 8211 8210 8220 8225 8222 8221 8237 8237 8237 8237 8237 8229 8250 8251 8250 8251 8250 8251 8250 8251 8250 8251 8239 8239 8239 8239 8239 8229 8107 8108 Key with detachable bit Lower stem Upper stem Folding key Upper stem Detaching mechanism Folding mechanism Lower stem 43
Key blanks - Safe locks Die-cast zinc Length (mm) Article number 53 8202-000-0 Length (mm) Article number 53 8230-000-0 18 Length (mm) Article number L1 L2 D 65 28 5,8 8231-000-0 95 58 5,8 8232-000-0 120 81 6,8 8247-000-0 145 106 6,8 8248-000-0 160 120 6,8 8249-000-0 44
Key blanks - Safe locks Die-cast zinc Length (mm) Article number L1 L2 115 64 8255-000-0 135 84 8252-000-0 170 120 8253-000-0 Messing Length Article number (mm) Without slot Slot on the right Slot on the left 72 8211-000-0 8211-005-0 8211-013-0 Length Article number (mm) Without slot Slot on the right Slot on the left 94 8210-000-0 8235-000-0 8235-001-0 Length Article number (mm) Without slot Slot on the right Slot on the left 114 8220-000-0 8220-004-0 8220-010-0 45
Key blanks - Safe locks Red brass Length Article number (mm) Without slot Slot on the right Slot on the left 56 8225-000-0 8225-007-0 8225-008-0 Nickel silver up to L1 180 mm Nickel silver/steel Length (mm) L1 L2 Without slot Article number Slot on the right Slot on the left 96 49 8221-000-0 8240-000-0 8240-002-0 150 103 8237-002-0 8237-000-0 8237-004-0 180 134 8237-018-0 8237-006-0 8237-008-0 230 184 8237-025-0 8237-010-0 8237-011-0 280 234 8237-026-0 8237-012-0 8237-013-0 320 274 8237-027-0 8237-014-0 8237-015-0 Length (mm) Article number 66 8222-000-0 Slot as per customer specifications Lafette key Steel Length (mm) Article number 65 8229-000-0 46
Key blanks - Safe locks Steel Length (mm) L1 L2 Article number 120 99 8250-000-0 170 149 8250-001-0 220 199 8250-002-0 Upper stem of detachable key 260 239 8250-003-0 Nickel silver Length Article number (mm) Without slot Slot on the right Slot on the left 60 8251-002-0 8251-000-0 8251-001-0 Lower stem of detachable key Nickel silver up to L1 180 mm Nickel silver/steel Length (mm) Article number L1 L2 L3 Without slot Slot on the right Slot on the left 150 104 70 8239 180 134 100 8239 230 184 125 8239 280 234 150 8239 Folding key 320 274 170 8239 47
Key blanks - Safe deposit locks Die-cast zinc Length (mm) Article number-client 56 8104-000-0 Length (mm) Article number-client 53 8227-000-0 Length (mm) Article number-client 62 8224-006-0 Steel Length (mm) Article number-bank 65 8229-000-0 48
Key blanks - Lattice door locks Steel Length (mm) Article number 75 8107-000-0 Length (mm) Article number 75 8108-000-0 49
Combination lock 7800 7800-100-0/7800-101-0 7800-102-0 7800-103-0 Certification EN 1300 B VdS Class 2 UL Group 2M ECBS Application range Hotel, small and home safes Gun cabinets VDMA A/B safes EN 0 V safes Technical characteristics 7800-000-0 case/bolt Fixing points stroke (mm) 8 Accessoires Dials & rings Dials & rings Dials & rings Dials & rings 3-wheel-combination lock die-cast zinc standard square bolt with 2 drilled holes plastic, black (7800-100-0) metal, black (7800-101-0) metal, satin chromed (7800-102-0) metal, gloss chromed (7800-103-0) 50
M 1:3 Changing Index Opening Index Characteristics lock 3-wheel-combination lock Approx. 1 million theoretical code combinations Easy changing of code with changing key on the back of the lock Protected against scanning Wheels tamper-proof by additional sealing Easy and time-saving installation of lock and dial & ring Reduction of installation errors - No discharging of lock plate needed - Actuation by square spindle - No spline key necessary - No need of splinting - No confusion of mounting position possible 3-way locking possibilities by insertion of extension latches Characteristics dial & ring Screened scale Separate Changing and Opening Index High-quality versions made of die-cast zinc or plastic Square spindle included in scope of delivery can be used up to a door strength of 125 mm Prepared notches in square spindle simplify trimming Individual front design of dial & ring possible 51