Vacuum analysis and measurement Leak detector SmartTest Remote control unit Remote control unit for SmartTest Remote control unit Rugged and reliable Easy operation Clear and unambiguous display Integrated magnetic holder Cable length, up to 28 m Note: For connection to the SmartTest, the connection cable PT445401 is required Dimensions 85 68 220 Order number Remote control unit for SmartTest PT 445 400 Accessories Connection cable for remote control unit, 4 m PT 445 401 Extension cable for remote control unit, 8 m PT 445 402 Page Page 590 590 www.pfeiffer-vacuum.net
Software Software for SmartTest helium leak detector Software Software for SmartTest helium leak detector PT 882 610-T USB Converter to RS-485 interface PM 061 207-T Connection cable, plug M12, RJ 45 PM 051 726-T For display and storage of leak test data Leak detector operation via PC System requirements: Hardware: Pentium PC (166 MHz or higher recommended); 32 MB RAM (128 MB recommended), 20 MB free hard disk memory, Super VGA monitor (with 1024 x 768 display resolution, small type size), 24-bit True Color, free COM port; local printer, mouse Operating system: Windows 98, Windows NT 4.0 operating system with Service Pack 4 installed, Windows 2000, Windows XP (administrative privileges required) Leak detection www.pfeiffer-vacuum.net Page Page 591 591
Vacuum analysis and measurement Leak detector SmartTest Sniffer probe Sniffer probe for sniffer leak detection. Easy connection to the SmartTest by an extra coupling. Enables both vacuum and sniffer leak detection without requiring much alteration work Sniffer probe Sniffer probe with standard tip GO/NO-GO indication by LEDs Button for background suppression Sniffer tip rigid, 120 mm long Capillary filter Easy connection to the SmartTest with an extra interface LP 503, sniffer probe with standard tip, 3 m BG 449 207-T LP 505, sniffer probe with standard tip, 5 m BG 449 208-T LP 510, sniffer probe with standard tip, 10 m BG 449 209-T Accessories Capillary filter, metal version, for sniffer tip BG 449 140-T TP 312, Sniffer tip stiff, 120 mm BG 449 215-T TP 385, Sniffer tip stiff, 385 mm BG 449 216-T TF 312, Sniffer tip flexible, 120 mm BG 449 217-T TF 385, Sniffer tip flexible, 385 mm BG 449 218-T Page Page 592 592 www.pfeiffer-vacuum.net
Sniffer test leak For calibrating sniffer leak detection Sniffer test leak Helium test leak, calibrated acc. to DIN 28417 High accuracy, rugged design Long life With integrated pressure gauge and gas storage tanks Dimensions 20 (0.79 ) 343 (13.5 ) 145 (5.71 ) Leak detection 115 (4.53 ) 160 (6.3 ) CL 004, Sniffer test leak, He leak rate approx. 10-4 mbar l/s, He CL 004, Sniffer test leak, He leak rate approx 10-5 mbar l/s, He CL 004, Sniffer test leak, He leak rate approx 10-6 mbar l/s, He CL 002 A Sniffer test leak, gas mixture He : H 2 = 95 % : 5 % leak rate approx. 10-6 mbar l/s BG 447 704-T BG 447 705-T BG 447 706-T BG 449 025A www.pfeiffer-vacuum.net Page Page 593 593
Vacuum analysis and measurement Leak detector SmartTest Bypass option For vacuum leak detection on large vessels and for protection of the leak detector against dirt Bypass option Optional extra for the SmartTest to reduce the pump-down time of large test items or items with a high exhaust gas rate For protection of the leak detector against dirt Including mains cable with German plug For a mains voltage of 85-248 V, 50/60 Hz Fully configured, easy to install Bypass option, with mains cable and PT 445 410-T German plug Bypass option, with US plug PT 445 412-T Page Page 594 594 www.pfeiffer-vacuum.net
Cart for SmartTest The ideal add-on unit for the SmartTest leak detector. Electrically and mechanically prepared to receive the SmartTest Cart for SmartTest Prepared for rotary vane pump and XtraDry dry pump Easy installation thanks to plug-and-socket connections Provision for a helium gas cylinder holder Safe against overturning Dimensions Leak detection 691 968 500 820 Cart with power connection, 100-120 VAC PT 445 416 Cart with power connection, 230 VAC PT 445 415 www.pfeiffer-vacuum.net Page Page 595 595
Vacuum analysis and measurement Leak detector SmartTest Calibrated test leak Calibrated test leak for vacuum applications, with manually operated valve, including gas storage tank Calibrated test leak Connection flange DN 10 ISO-KF With manually operated valve With integrated gas storage tank Dimensions 36 ø48 170 DN 10 ISO-KF 220 CT 446, He test leak, leak rate adjustable from 10-6 - 10-4 mbar l/s, DN 10 ISO-KF CT 408, He test leak, leak rate approx. 10-8 mbar l/s, DN 10 ISO-KF B8 115 580 B8 116 557 Page Page 596 596 www.pfeiffer-vacuum.net
Helium pistol For local leak detection in plants and systems Helium pistol Locating of leaks in plants and systems Connection to helium cylinder with pressure reducer via a plastic hose Robust Easy metering Spiral hose connection R 1/4" Helium-tight, no unintentional enrichment of the environment Helium pistol BG 512 125-T Leak detection www.pfeiffer-vacuum.net Page Page 597 597
Vacuum analysis and measurement Leak detector SmartTest Signal tower Optical indication of exceeded threshold values Signal tower Indication of exceeded threshold values by red-green lights Easy installation by means of a plug-and socket connection Magnetic holder Connection to digital interface of the leak detector Signal tower B4681891KC Page Page 598 598 www.pfeiffer-vacuum.net
Transport case for SmartTest For transportation of the SmartTest helium leak detector and Transport case for SmartTest For transportation of the leak detector and Dimensions: 730 mm x 570 mm x 500 mm Weight: 18 kg For SmartTest models HLT 550, 560, 570 Transport case PT 445 403 Leak detection www.pfeiffer-vacuum.net Page Page 599 599