Glassware Washers WM Series Efficient washing results for laboratory glassware
Washing equipment for research and scientific laboratories ICOS has developed a full range of glassware washer disinfectors to get the perfect solution for any laboratory. The most outstanding features of these washers are: versatility, easy handling, high performance and reliability. Each model of our full range of washer disinfectors combines high productivity with cost efficiency: an effective solution to improve the economy of your laboratory. Chamber volume 171 lt Chamber volume 200/250 lt Standard compliant ICOS Laboratory glassware washers comply with the currents European directives and standards as follow: 200/42/EC, 2014/35/EU, 2014/30/EU and 2011/5/EU Directives, EN 1010-1, EN 1010-2-040, EN 132-1, EN ISO 15883-1 current standards. Cleaning effectiveness & proper drying ICOS high pressure laboratory glassware washing systems are the total cleaning solution for every washing need. The hydraulic circuit maximizes flow and pressure distributing the water evenly throughout the system. Dry air is channeled into the wash chamber and through the hydraulic circuit. Efficient HEP filtering of the drying air ensures the highest level of hygiene. 2
Glassware Washers WM Series Chamber volume 350 lt Chamber volume 500 lt Chamber volume 00 lt Chamber volume 500 lt Process control Washers microprocessor control constantly monitors and displays current cycle status and alarms. The control system provides up to 5 programs with preset parameters for chemistry glassware and additional programs that can be modified to fit any application by adjusting program phases, temperatures, phase times and chemical dosing. Flexibility and Performance The right rack and accessory is the key to ensure cleanliness and increase productivity by perfectly matching your application. ICOS provides a versatile rack system to fit all types of laboratory items (from bottles to pipettes) with various configurations of sizes and quantities of jets. Washing carts custom configuration is also available by combining empty wash cart frame with nozzles. 3
WM 50 Series Undercounter Glassware Washers 2X WM 50 SCL Chamber volume ~171 lt / 45.17 Gal US asket volume ~151 lt / 39.89 Gal US Washing system on two indipendent levels Chamber drying by electrical heating elements Heavy duty washing pump Triple stage water filtering system djustable water temperature (up to 93 C) for washing and thermal disinfection phases Double PT 1000 probe for temperature check Steam condenser Two automatic dispensers for liquid chemicals LCD control panel (40 washing programs) RS232 and US ports LCD display control panel with 40 washing programs for laboratory glassware: 20 standard and 20 additional available for customization. RS 232 port for printer or PC connection to monitor and validate the washing cycles and/or the data storage. US port on the front panel to allow the washing cycles data storage and/or the software updating. 4
Washing and Sterilization Equipment Main options 2X WM 50 SCL WM 50 CL WM 50 DRS 3rd chemical dosing pump 4th chemical dosing pump Extra power 8 kw WM 50 CL Tank for preheating DI water Same features as WM 50 SCL plus: Washing system on two indipendent levels Forced hot air drying system on two indipendent levels uilt-in water softener External printer Integrated printer Glass window Stand (00 mm height) Hepa H14 air filter 2X WM 50 DRS Same features as WM 50 SCL plus: Washing system on two indipendent levels High power - forced hot air drying system on two indipendent levels Integrated lateral compartment (300mm width) for: - storage of chemical tanks - direct access to drying filtering systems - direct access to chemical dosing systems Washer dimensions Width Depth Height WM 50 SCL WM 50 CL WM 50 DRS mm 00 00 900 inches 23.72 23.72 35.43 mm 30 30 30 inches 24.80 24.80 24.80 mm 850 850 850 inches 33.4 33.4 33.4 Stands and side cabinets Different models of 300mm/11.81 wide side cabinets allow to locate: - Tank for preheated DI water - Purification system for DI water - Up to four 5 lt./1.32 Gal US chemical containers Stands (00mm/23.2 height) equipped with doors for storage access are equipped with doors for storage access and improve ergonomics when the machine is not installed under counter. 5
WM 50 Series Full loading space Injection nozzles upper level Injection nozzles lower level C721 - upper washing cart with washing arm, loading space 485x450mm (19.09 x17.72 ) 3 positions max glassware ø 74mm, max glassware h 10mm C711E frame + 3 nozzles C054924 39 positions, max glassware ø 70mm, max glassware h 200...300mm C990E frame + 39 nozzles C054904 C788 - support grid to have a flat surface on a C721, usable height reduced by 50mm Injection nozzles for vials 39 positions, mixed nozzles average glassware ø 70mm, max glassware h 200...300mm C990E frame + 10 nozzles C054905 + 29 nozzles C054904 C52L - lower washing cart, loading space 490x470mm (19.29 x18.50 ) upper level suggested configuration 210 positions max glassware ø 30mm, max glassware h 35...5mm C1342E frame + 210 nozzles C054953 lower level suggested configuration 210 positions max glassware ø 30mm, max glassware h 35...5mm C1341E frame + 210 nozzles C054953
WM 50 washing carts Half space + Injection nozzles lower level Half space + Nozzles for vials Injection nozzles + Nozzles for vials lower level upper level 18 positions, mixed nozzles max glassware ø 2mm, max glassware h 200...300mm loading space mm 250x490 / 9.84 x19.29 C1197E frame + 9 nozzles C054905 + 9 nozzles C054904 12 positions, mixed nozzles with supports max glassware ø 70mm, max glassware h 180...280mm loading space mm 250x490 / 9.84 x19.29 C717E frame + nozzles C054948 + nozzles C054947 upper level C858 224 positions, useful ø 12 mm, equipped with 19mm height nozzles + loading space mm 250x490/9.84 x19.29 lower level C859 224 positions, max ø 12 mm, equipped with 19mm height nozzles + loading space mm 270x500/10.3 x19.8 121 positions max glassware ø 20mm, max glassware h 10mm 18 positions max glassware ø 70mm, max glassware h 10mm C723E frame + 121 nozzles C054903 + 18 nozzles C054924 note: see also C101, C108 and C1105 accessories 121 positions max glassware ø 20mm, max glassware h 10mm 10 positions max glassware ø 89mm, max glassware h 10mm C804E frame + 121 nozzles C054903 + 10 nozzles C054905 note: see also C101, C108 and C1105 accessories 7
WM 50 washing carts Injection Washing for Pipettes Immersion Washing for Pipettes Multipurpose Injection nozzles C759 lower level, max 48 positions. Minimum pipette lenght 250mm/9.84 and 300mm/11.81 Maximum pipette length 535mm/21.0 C119 lower level: 5 positions for pipettes min pipette length 250mm max pipette length 535 mm) 2 nozzles h 220 ø max 130mm 4 nozzles h 220 ø max 98mm 3 nozzles (C054922) h 175 ø max 0mm additional loading space 20mm x 230mm. C720 lower level, with 2 pipettes cassettes. Maximum pipette length 300mm / 11.81 Pipettes must be fully covered by water and therefore must stay within the cassette. C719 lower level, max 121 positions. Maximum pipette length 470mm/18.50 Level positions 2 1 1 480 mm / 18.90 2 210 mm / 8.2 3 250 mm / 9.84 3 The use of an upper level washing cart provided with washing arm reduces the useful height of the level placed below by 40mm/1.57 and allows a gain of 15mm/0.59 on the top. 8
washing cart frame selection for custom configurations n empty version of the rack gives the customer the possibility of full configuration. It is possible to customize the washing cart frame by using different nozzles and/or accessories. Nozzles are listed in the final pages of the catalogue. + = Glassware diameter Upper and lower level empty racks Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C1342E 30 / 1.18 210 U only for mm 2,5/0.1 Ø nozzles C1235E 25 / 0.98 15 U only for mm 2,5/0.1 Ø nozzles C1132E 40 / 1.57 110 U only for mm 2,5/0.1 Ø nozzles C809E 50 / 1.97 4 U only for mm 2,5/0.1 Ø nozzles C815E 57 / 2.24 5 U only for mm 2,5-4/0.1-0.1 Ø nozzles C711E 74 / 2.91 3 U C712E 90 / 3.54 25 U C953E 105 / 4.13 18 U C723E 70 / 2.75 18+121 U see C108, C101, C1105 accessories The table shows the maximum glassware diameter in the washing cart frame and position options. C1341E 30/ 1.18 210 L only for mm 2,5/0.1 Ø nozzles C1133E 40 / 1.57 110 L only for mm 2,5/0.1 Ø nozzles C810E 50 / 1.97 4 L only for mm 2,5/0.1 Ø nozzles C81E 5 / 2.20 5 L only for mm 2,5-4/0.1-0.1 Ø nozzles C990E 70 / 2.75 39 L C715E 70 / 2.75 3 L C71E 89 / 3.50 25 L C954E 105 / 4.13 18 L C1079E 110 / 4.33 1 L C901E 150 / 5.90 9 L C1197E 2 / 2.44 18 L mm 250x490 / 9.84 x19.29 space C717E 70 / 2.75 12 L mm 290x490 / 11.42 x19.29 space C718E 89 / 3.50 10 L mm 25x490 / 10.43 x19.29 space C804E 89 / 3.50 10+121 L see C108, C101, C1105 accessories 9
WM 0 - WM 1 Series Freestanding Glassware Washers 3X WM 0 Chamber volume ~200 lt / 52.83 Gal US asket volume ~170 lt / 44.90 Gal US Washing and forced hot air drying system on three indipendent levels The upper level can be placed at two different water/ air connections depending on the height of the loaded glassware. Heavy duty washing pump Triple stage water filtering system djustable water temperature (up to 93 C) for washing and thermal disinfection phases Double PT 1000 probe for temperature check Steam condenser Two automatic dispensers for liquid chemicals Hinged door with glass window Sliding drawer for storage of chemical tanks (up to three 5 lt/1.32 Gal US) LCD display control panel with 40 washing and thermal disinfection programs for laboratory glassware: 20 standard preset cycles and 20 additional, available for customization RS 232 port dedicated for printer or PC connection to monitor and validate the washing cycles and/or the data storage LCD display control panel with 40 washing programs for laboratory glassware: 20 standard and 20 additional available for customization. RS 232 port for printer or PC connection to monitor and validate the washing cycles and/or the data storage. 10
Washing and Sterilization Equipment 4X 4X WM 1 WM 1 SL Same features as WM 0 plus: Same features as WM 1 plus: Chamber volume ~250 lt /.04 Gal US asket volume ~220 lt / 58.12 Gal US Washing and forced hot air drying system on four indipendent levels. The upper levels can be placed at two different water/air connections depending on the height of the loaded glassware. Full glass sliding down door. Soft touch control panel with graphic color LDC display US port Washer dimensions Width Depth Height WM 0 WM 1 WM 1 SL mm 50 50 85 inches 25.59 25.59 2.97 mm 0 87 7 inches 25.98 27.05 2.2 mm 185 1840 190 inches.34 72.44 77.1 Main options WM 0 WM 1 WM 1 SL 3rd and 4th chemical dosing pump oiler for preheating DI water uilt-in water softener Hepa H14 air filter Integrated printer Light inside the chamber US port Ethernet connection High capacity WM 1 model can be used to clean large bottles up to 0 lt, 15.85 Gal US 11
WM 0 - WM 1 Series Full loading space Injection nozzles upper level Injection nozzles lower level C728 - upper washing cart with washing arm, loading space 485x525mm (19.09 x20.7 ) upper level 42 positions max glassware ø 70mm, max glassware h 10mm C724E frame + 42 nozzles C054924 lower level 42 positions, max glassware ø 70mm, max glassware h 230mm C729E frame + 42 nozzles C054904 20 positions max glassware ø 100mm, max glassware h 230mm C725E frame + 20 nozzles C054922 20 positions max glassware ø 100mm, max glassware h 200...300mm C730E frame + 20 nozzles C054905 C788 - support grid to have a flat surface on a C73, usable height reduced by 50mm C 42 positions, mixed nozzles average glassware ø 70mm, max glassware h 200...300mm C 42 positions, mixed nozzles average glassware ø 70mm, max glassware h 200...300mm C724E frame + 10 nozzles C054922 + 32 nozzles C054924 C729E frame + 10 nozzles C054922 + 32 nozzles C054924 D 42 positions, mixed nozzles with supports average glassware ø 70mm, max glassware h 180...280mm C729E frame + 12 nozzles C054948 + 30 nozzles C054947 C73 - lower washing cart, loading space 490x470mm (19.29 x18.50 ) 12
WM 0 - WM 1 washing carts Half space + Injection nozzles lower level Injection nozzles for big size glassware Injection nozzles for vials lower level 24 positions, mixed nozzles max glassware ø 70mm, max glassware h 200...300mm loading space mm 230x490 / 9.0 x19.29 C731E frame + 12 nozzles C054905 + 12 nozzles C054904 C1039 lower level, capacity: up to 4 items Ø max 240mm/9.45 up to 5 items Ø max 190mm/7.48 C1040 lower level, capacity: up to 2 items Ø max 280mm/11.02 upper level 121 positions, max glassware ø 25mm, max glassware h 90mm C1148E frame + 121 nozzles C054953 note: see also C1150 accessory lower level 12 positions, mixed nozzles with supports max glassware ø 100mm, max glassware h 180...280mm loading space mm 220x490 / 8. x19.29 C732E frame + nozzles C054948 + nozzles C054947 C1121 lower level, for 50 lt carboy. Only for WM 1 model lower level 121 positions, max glassware ø 25mm, max glassware h 140mm C1149E frame + 121 nozzles C054953 note: see also C1150 accessory 13
WM 0 - WM 1 washing carts Injection nozzles + Nozzles for vials Injection Washing for Pipettes Immersion Washing for Pipettes upper level 121 positions max glassware ø 20mm, max glassware h 10mm 24 positions max glassware ø 75mm, max glassware h 10mm C74E frame + 121 nozzles C054903 + 24 nozzles C054924 note: see also C101, C108 and C1105 accessories lower level 121 positions max glassware ø 20mm, max glassware h 10mm 24 positions max glassware ø 75mm, max glassware h 300mm C83E frame + 121 nozzles C054903 + 24 nozzles C054905 note: see also C101, C108 and C1105 accessories C989 lower level, max 5 positions. Minimum pipette lenght 250mm/9.84 and 300mm/11.81 Max. pipette length 70mm/29.92 on WM 1 model and 535mm/21.0 on WM 0 model. C733 lower level, max 121 positions. Maximum pipette length 470mm/18.50 on WM 0 Maximum pipette length 20mm/24.41 on WM 1 C734 lower level, with 2 pipettes cassettes, for WM 1 models only Maximum pipette length 520mm/20.47 C735 lower level, with 3 pipettes cassettes, for WM 1 models only Maximum pipette length 300mm/11.81 C1141 lower level, with 2 pipettes cassettes, for WM 0 models Maximum pipette length 300mm/11.81 Pipettes must be fully covered by water and therefore must stay within the cassette. 14
washing cart frame selection for custom configurations n empty version of the rack gives the customer the possibility of full configuration. It is possible to customize the washing cart frame by using different nozzles and/or accessories. Nozzles are listed in the final pages of the catalogue. max Ø Top view of a portion of a injection washing cart showing the maximum glassware diameter. Level positions Upper and lower level empty racks WM 0 1 480 mm / 18.90 2 250 mm / 9.84 3 180 mm / 7.09 4 210 mm / 8.2 5 280 mm / 11.02 WM 1 3 2 1 4 5 empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C1092E 32 / 1.2 15 U only for mm 2,5/0.1 Ø nozzles C1192E 40 / 1.57 110 U only for mm 2,5/0.1 Ø nozzles C837E 35 / 1.38 84 U only for mm 2,5/0.1 Ø nozzles C724E 70 / 2.75 42 U C725E 100 / 3.93 20 U C838E 110 / 4.33 1 U C991E 20 / 0.79 121 U mm 200x490 / 7.87 x19.29 space C74E 75 / 2.95 24+121 U see C108, C101, C1105 accessories C1148E 25 / 0.98 121 U only for mm 2,5/0.1 Ø nozzles 1 30 mm / 24.80 2 440 mm / 17.32 3 340 mm / 13.38 4 220 mm / 8. 5 170 mm /.9 270 mm / 10.3 7 390 mm / 15.35 8 200 mm / 7.87 9 100 mm / 3.94 9 8 5 4 7 3 2 1 C1149E 25 / 0.98 121 L only for mm 2,5/0.1 Ø nozzles C1093E 40 / 1.57 110 L only for mm 2,5/0.1 Ø nozzles C1127E 0 / 2.3 5 L only for mm 2,5-4/0.1-0.1 Ø nozzles C729E 70 / 2.75 42 L C730E 100 / 3.93 20 L C839E 110 / 4.33 1 L C885E 130 / 5.19 12 L C731E 70 / 2.75 24 L mm 230x490 / 9.0 x19.29 space C732E 100 / 3.93 12 L mm 220x490 / 98. x19.29 space C83E 75 / 2.95 24+121 L see C108, C101, C1105 accessories The use of an upper level washing cart provided with washing arm reduces the useful height of the level placed below by 40mm/1.57 and allows a gain of 15mm/0.59 on the top. The table shows the maximum glassware diameter allowed in the washing cart frame and of the number related positions. 15
WM - WM 8 Series Freestanding Glassware Washers 3X WM Washing and forced hot air drying system on three indipendent levels. The upper levels can be used simultaneously or individually by positioning the washing carts on one of the connections suitable for the height of the loaded glassware Heavy duty washing pump Triple stage water filtering system djustable water temperature (up to 93 C) for washing and thermal disinfection phases Double PT 1000 probe for temperature check Two automatic dispensers for liquid chemicals Hinged door with glass window Sliding drawer for storage of chemical tanks (up to three 10 lt/2.4 Gal US) LCD display control panel with 40 washing and thermal disinfection programs for laboratory glassware: 20 standard preset cycles and 20 additional, available for customization RS 232 port dedicated for printer or PC connection to monitor and validate the washing cycles and/or the data storage Chamber volume ~00 lt / 158.50 Gal US asket volume ~430 lt / 113.59 Gal US Level positions WM The use of an upper level washing cart provided with washing arm reduces the useful height of the level placed below by 50mm/1.97 and allows a gain of 15mm/0.59 on the top. 1 770 mm / 30.31 2 480 mm / 18.90 3 170 mm /.9 4 280 mm / 11.02 5 290 mm / 11.42 580 mm / 22.83 3 5 2 4 1 Washer dimensions WM Width mm 1140 inches 44.88 Depth mm 930 inches 3.1 Height mm 1975 inches 77.7 1
5X WM 8 Same features as WM plus: Two washing pumps feeding washing circuits to ensure high flow rate combined with effective spray pressure Washing and forced hot air drying system on five indipendent levels The upper levels can be used simultaneously or individually by positioning the washing carts on one of the connections suitable for the height of the loaded glassware Possibility to store up to three 10 lt./2.4 Gal US containers into a sliding drawer. Chamber volume ~00 lt / 158.50 Gal US asket volume ~430 lt / 113.59 Gal US Level positions WM 8 The use of an upper level washing cart provided with washing arm reduces the useful height of the level placed below by 50mm/1.97 and allows a gain of 15mm/0.59 on the top. 1 770 mm / 30.31 2 10 mm / 24.02 3 480 mm / 18.90 4 370 mm / 14.57 5 150 mm / 5.91 115 mm / 4.53 7 90 mm / 3.54 8 180 mm / 7.09 9 170 mm /.9 10 280 mm / 11.02 11 290 mm / 11.42 12 390 mm / 15.35 13 580 mm / 22.83 9 8 11 4 3 7 2 1 5 10 12 13 Washer dimensions WM 8 Width mm 1140 inches 44.88 Depth mm 930 inches 3.1 Height mm 1975 inches 77.7 17
WM - WM 8 Series Full loading space Injection nozzles upper level Injection nozzles lower level Half space + Injection nozzles upper level C420 - upper washing cart with washing arm, loading space 585x75mm (23.03 x30.12 ) C419 - lower washing cart without washing arm, loading space 20x75mm (24.41 x30.12 ) C44 - grid to allow the loading of small object on std. washing carts dim. 752x582mm (29.0 x22.91 ) C447 - grid cover to be positioned over light object dim. 752x582mm (29.0 x22.91 ) C 72 positions max glassware ø 5mm, max glassware h 10mm C410E frame + 72 nozzles C054924 48 positions max glassware ø 90mm, max glassware h 230mm C425E frame + 48 nozzles C054922 72 positions, mixed nozzles average glassware ø 5mm, max glassware h 200...300mm C410E frame + 18 nozzles C054922 + 54 nozzles C054924 C D 72 positions max glassware ø 75mm, max glassware h 230mm C414E frame + 72 nozzles C054904 48 positions max glassware ø 90mm, max glassware h 200...300mm C424E frame + 48 nozzles C054905 72 positions mixed nozzles average glassware ø 75mm, max glassware h 200...300mm C414E frame + 18 nozzles C054922 + 54 nozzles C054924 72 positions mixed nozzles with supports average glassware ø 75mm, max glassware h 180...280mm C414E frame + 18 nozzles C054948 + 54 nozzles C054947 suggested configuration 21 positions max glassware ø 85mm, max glassware h 300mm loading space mm 480x585 / 18.90 x23.03 C413E frame + 21 nozzles C054905 18
WM - WM 8 washing carts Injection nozzles for big size glassware Injection nozzles + Nozzles for vials Injection Washing for Pipettes Immersion Washing for Pipettes C130 lower level, capacity: up to 4 items Ø max 240mm/9.45 1 item Ø max 315mm/12.40 C1177 lower level, capacity: up to 4 items Ø max 300mm/11.81 C1178 lower level, capacity: up to 2 items Ø max 400mm/15.75 upper level 121 positions max glassware ø 20mm, max glassware h 10mm 40 positions max glassware ø 75mm, max glassware h 230mm C421E frame + 121 nozzles C054903 + 40 nozzles C054904 note: see also C101, C108 and C1105 accessories C41 lower level, max 88 positions. Minimum pipette lenght 300mm/11.81 Max. pipette length 450mm/17.71 with 2 upper levels installed and 700mm/27.5 with 1 upper level installed. C418 lower level, with 3 pipettes cassettes, Maximum pipette length 520mm/20.47 C417 lower level, with 2 pipettes cassettes, Maximum length 520mm / 20.47 Pipettes must be fully covered by water and therefore must stay within the cassette. Upper and lower level empty racks Wash cart frame selection for custom configurations Selection of an empty rack enables users to customize the wash cart frame using different nozzles and accessories. See final pages of the catalogue. empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C423E 25 / 0.98 330 U only for mm 2,5/0.1 Ø nozzles C410E 5 / 2.55 72 U C411E 84 / 3.30 5 U C425E 90 / 3.54 48 U C1238E 105 / 4.13 35 U C444E 150 / 5.90 18 U C413E 85 / 3.35 21 U mm 480x585 / 18.90 x23.03 space C421E 75 / 2.95 40+121 U see C108, C101, C1105 accessories Glassware diameter Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø C414E 75 / 2.95 72 L C415E 85 / 3.35 5 L C424E 90 / 3.54 48 L C1239E 105 / 4.13 35 L C443E 150 / 5.90 18 L C42E 190 / 7.48 10 L C427E 250 / 9.84 L The table shows the maximum glassware diameter in the washing cart frame and position options. 19
WM 4 SL Freestanding Glassware Washers 4X Full loading space WM 4 SL Washing and forced hot air drying system on four independent levels The upper levels can be docked to three different water/air connections depending on the height of the loaded glassware. Vertical sliding down full glass door. Steelcotronic control system with industrial PLC, 5,7 touch screen display. Up to 5 washing programs for laboratory glassware. Hinged door for access to storage of chemical tanks (up to two 10 lt/2.4 Gal US) C1390 - upper washing cart with washing arm, loading space 570x00mm (22.44 x23.2 ) Single pass final rinse C1502 - support grid to have a flat surface on a C1390, usable height reduced by 50mm WM 4 washer can be equipped with a non recirculated final rinse hydraulic circuit option. Chamber volume ~350 lt / 12.3 ft 3 asket volume ~280 lt / 9.89 ft 3 C1389 - lower washing cart, loading space 570x00mm (22.44 x23.2 ) Level positions 1 30 mm / 24.80 2 440 mm / 17.32 3 340 mm / 13.38 4 220 mm / 8. 5 170 mm /.9 270 mm / 10.3 7 390 mm / 15.35 8 200 mm / 7.87 9 100 mm / 3.94 9 8 5 4 7 3 2 1 The use of an upper level washing cart provided with spray arm reduces the useful height of the level placed below by 40mm/1.57 but allows a gain of 15mm/0.59 on top. Dimensions WM 4 SL Width mm 75 inches 30.10 Depth mm 800 inches 31.50 Height mm 1975 inches 77.7 20
WM 4 SL washing carts Injection nozzles for small size glassware, upper/lower levels Injection nozzles for mid size glassware, upper/lower levels Injection nozzles for large size glassware Injection washing for pipettes upper/lower levels C 208 positions max glassware ø 41mm/1.1, max glassware h 10mm/.30 C1412E frame + 208 nozzles C054903 137 positions max glassware ø 51mm/2.01, max glassware h 180mm/7.09 C1411E frame + 137 nozzles C054924 90 positions, max glassware ø 0mm/2.3, max glassware h 230mm/9.0 C1408E frame + 90 nozzles C054904 Wash cart frame selection for custom configurations Selection of an empty rack enables users to customize the wash cart frame using different nozzles and accessories. See final pages of the catalogue. upper/lower levels C 5 positions max glassware ø 7mm/3.00, max glassware h 230mm/9.0 C1407E frame + 5 nozzles C054904 35 positions max glassware ø 95mm/3.74, max glassware h 280mm/11.02 C140E frame + 35 nozzles C054905 18 positions max glassware ø 120mm/4.72, max glassware h 330mm/13.00 C1405E frame + 18 nozzles C054959 Upper and lower level empty racks empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C1412E 41 / 1.1 208 U/L only for mm 2,5/0.1 Ø nozzles C1411E 51 / 2.01 137 U/L only for mm 2,5/0.1 Ø nozzles C1408E 0 / 2.3 90 U/L only for mm 2,5/0.1 Ø nozzles C1407E 7 / 3.00 5 U/L only for mm 2,5-4/0.1-0.1 Ø nozzles C1521E 80 / 3.15 3 U/L C140E 95 / 3.74 35 U/L C1518E 110 / 4.33 22 U/L C1405E 120 / 4.72 18 U/L C1519E 135 / 5.31 14 U/L C1520E 180 / 7.09 8 U/L C1410E 95 / 3.74 20 U C1404 upper/lower level, capacity: up to 8 items Ø max 200mm/7.87 C1403 upper/lower level, capacity: up to 5 items Ø max 240mm/9.45 C1515 upper/lower level, capacity: up to 4 items Ø max 280mm/11.02 7 measuring cylinders, 4 x max Ø130mm - 3 x Ø 180mm. C1455 upper/lower level, capacity: up to 4 items Ø max 280mm/11.02 1 measuring cylinder Ø max 95mm/3.74 C1402 upper/lower level, capacity: up to 3 items Ø max 305mm/12.00 Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø C1409 lower level, max 200 positions. Min. pipette lenght 150mm/5.91 Max. pipette length 20mm/24.41 C1410E upper level, to be used combined with C1409 wash cart for pipettes suggested configuration 20 positions max glassware ø 95mm/3.74, max glassware h 280mm/11.02 C1410E frame + 20 nozzles C054905 The table shows the maximum glassware diameter in the washing cart frame and position options. 21
WM 90 Series High capacity Glassware Washers 4X WM 90 Washing system on four indipendent levels The upper level can be placed at two different water/air connections depending on the height of the loaded glassware. Two automatic dispensers for liquid chemicals Sliding up, full glass door Storage space for chemical tanks (up to three 10 lt/2.4 Gal US) LCD display control panel with 40 washing and thermal disinfection programs for laboratory glassware: 20 standard preset cycles and 20 additional, available for customization RS 232 port dedicated for printer or PC connection to monitor and validate the washing cycles and/or the data storage Chamber volume ~500 lt / 132.08 Gal US asket volume ~350 lt / 92.4 Gal US Level positions The use of an upper level washing cart provided with washing arm reduces the useful height of the level placed below by 50mm/1.97 and allows a gain of 15mm/0.59 on the top. 1 585 mm / 23.03 2 345 mm / 13.58 3 235 mm / 9.25 4 205 mm / 8.07 5 75 mm / 2.95 75 mm / 2.95 7 125 mm / 4.35 8 315 mm / 12.40 9 185 mm / 7.28 10 425 mm / 1.73 7 7 3 3 9 9 2 2 5 5 1 1 4 4 8 108 10 Washer dimensions WM 90 Width mm 1140 inches 44.88 Depth mm 915 inches 3.02 Height mm 1900 inches 74.80 22
WM 90 washing carts Full loading space Injection nozzles all levels Half space + Injection nozzles all levels Injection nozzles + nozzles for vials C43 - upper washing cart with washing arm, loading space 585x75mm (23.03 x30.12 ) C125 - lower washing cart without washing arm, loading space 20x75mm (24.41 x30.12 ) C44 - grid to allow the loading of small object on std. washing carts dim. 752x582mm (29.0 x22.91 ) C447 - grid cover to be positioned over light object dim. 752x582mm (29.0 x22.91 ) C D 72 positions max glassware ø 75mm, max glassware h 10mm C434E frame + 72 nozzles C054924 48 positions max glassware ø 90mm, max glassware h 230mm C440E frame + 48 nozzles C054922 72 positions, mixed nozzles average glassware ø 75mm, max glassware h 200...300mm C434E frame + 18 nozzles C054922 + 54 nozzles C054924 72 positions, mixed nozzles with supports average glassware ø 75mm, max glassware h 180...280mm C434E frame + 18 nozzles C054948 + 54 nozzles C054947 suggested configuration 21 positions, upper level max glassware ø 85mm, 121 positions max glassware h 300mm max glassware ø 20mm, loading space mm 480x585 / 18.90 x23.03 max glassware h 10mm 40 positions C450E frame max glassware ø 75mm, + 21 nozzles C054905 max glassware h 230mm C441E frame + 121 nozzles C054903 + 40 nozzles C054904 Injection Washing for Pipettes note: see also C101, C108 and C1105 accessories C442 lower level, max 88 positions. Minimum pipette lenght 300mm/11.81 Max. pipette length 500mm/19.8 with 1 upper level installed and 700mm/27.5 without upper levels installed. Wash cart frame selection for custom configurations Selection of an empty rack enables users to customize the wash cart frame using different nozzles and accessories. See final pages of the catalogue. The table shows the maximum glassware diameter in the washing cart frame and position options. Empty wash racks empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C439E 25 / 0.98 330 all only for mm 2,5/0.1 Ø nozzles C434E 75 / 2.95 72 all C435E 84 / 3.30 5 all C440E 90 / 3.54 48 all C445E 150 / 5.90 18 all C1205E 190 / 7.48 10 all C450E 85 / 3.35 21 all mm 480x585 / 18.90 x23.03 space C441E 75 / 2.95 40+121 all see C108, C101, C1105 accessories Glassware diameter Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø 23
WM 100 Series High capacity Glassware Washers 4X WM 100 Washing system with washing carts composed with 4 removable injection cassettes on two levels. Filtered forced hot air drying system The upper level can be removed depending on the height of the loaded glassware Two washing pumps feeding washing circuits to ensure high flow rate combined with effective spray pressure Sliding down full glass door, also available in double door pass-through version Touch screen color display with 5 programs Washing carts The injection rack can accept up to 4 cassettes in two levels. Chamber volume ~500 lt / 132.08 Gal US asket volume ~350 lt / 92.4 Gal US Level positions 1 05 mm / 23.82 2 275 mm / 10.83 3 315 mm / 12.40 WM 100 washing cart system is composed by a support washing cart that can be configurated with removable cassettes on two levels. For injection nozzles details and cassette custom configurations, please refer to the final pages of the catalogue. 2 3 1 Washer dimensions WM 100 Width mm 1100 inches 43.30 Depth mm 90 inches 37.80 Height mm 1940 inches 7.38 24
WM 100 washing carts ase injection washing cart Injection nozzles all levels Injection Washing for Pipettes C408 lower vertical pippettes cassette 8 positions. Minimum pipette lenght 270mm/10.3, maximum pipette length 590mm/23.23. C400W - base injection washing cart suitable for removable cassettes on 2 levels 34 positions max glassware ø 75mm, max glassware h 10mm C402E frame + 34 nozzles C054924 24 positions max glassware ø 98mm, max glassware h 230mm C40E frame + 24 nozzles C054922 Wash cart frame selection for custom configurations Selection of an empty rack enables users to customize the wash cart frame using different nozzles and accessories. See final pages of the catalogue. Empty wash racks empty rack code max Ø mm/in. nr. of injection positions Upper level Lower level notes C409E 40 / 1.57 99 all only mm 2,5/0.1 Ø nozzles can be used C407E 50 / 1.97 7 all C402E 75 / 2.95 34 all C40E 98 / 3.85 24 all C403E 92 / 3.2 22 all Glassware diameter Top view of a portion of a injection washing cart showing the maximum glassware diameter. max Ø The table shows the maximum glassware diameter in the washing cart frame and position options. 25
Technical data WM 50 CL WM 50 DRS WM 0 WM 1 WM 1 SL WM 4 SL Compliance with standards EN 1010-1, EN 1010-2-040, EN 132, EN ISO 15883-1 200/42/EC, 2014/35/EU, 2014/30/EU, 2011/5/EU Washing system Nr. of independent levels of the washing and/or drying system 2 2 3 4 4 4 Nr. of levels that can be used simultaneously 2 2 2 3 3 3 Triple stage water filtering system uilt-in water softener - - oiler/tank for preheating DI water 5 3 djustable water temperature (up to 93 C) Double PT 1000 probe for temperature check Chemicals Std equipment of chemical dosing pumps: nr. 2 2 2 2 2 2 dditional chemical dosing pumps: up to nr. 3 4 4 4 4 4 Storage of chemical tanks, nr. and capacité lt/gal US 2 3 3 3 2 - (capacité may vary depending on option configurated in the washer) 5/1.32 5/1.32 5/1.32 5/1.32 10/2.4 Drying system Convection drying heated by electrical heating elements - - - - - - Forced hot air drying system Pre filter 98% Hepa H14 air filter Steam condenser Device configuration Stainless steel door - - - - Stainless steel door with glass window - - - - - - 2 2 Full glass door Double door pass through version - - - - - - Light inside the chamber Control system and traceability LED display control panel, 10 programs - - - - - - LCD display control panel, 40 programs - - - - 1 1 LCD display soft touch control panel, 40 programs - Touch screen display, 5 programs - - - - - RS232 - US port - Ethernet connection - - External printer - Integrated printer - Complements Integrated lateral compartment (300mm width) - - - - Stands (00 mm height) - - - - Utilities Electrical feeding Steam feading - - Standard electrical connection others available on request 400V 400V 400V 400V 400V 400V 3~+N 50Hz 3~+N 50Hz 3~+N 50Hz 3~+N 50Hz 3~+N 50Hz 3~+N 50Hz Total power W 500 500 8250 8250 8250 13000 note: 1) with glass door version only; 2) with LCD Soft touch only; 3) Preheating tank. Single pass final rinse option on WM 4; 4) On removable cassettes; 5) Into side cabinet ) with forced hot air drying system; 7) when configured with LCD and LCD soft touch control panel = Standard = Optional - = Not available 2
WM WM 8 WM 90 WM 100 3 5 4 4 4 3 4 3 3 - - - - 3 washing system selection, injection nozzles, accessories and components 2 2 2 2 4 4 4 4 3 3 10/2.4 10/2.4 3 10/2.4 3 10/2.4 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 400V 400V 400V 400V 3~+N 50Hz 3~+N 50Hz 3~+N 50Hz 3~+N 50Hz 20000 20000 20000 20000 27
Washing systems selection with preconfigured wash carts Injection washing Immersion and flushing washing ulb, graduated, Pasteur pipettes eakers Jugs Mugs uckets Jars Weighing bottles Funnels Powder funnels Imhoff cones Evaporating dishes Weighing dishes Petri dishes asins Trays Erlenmeyer flasks ottles eakers Weighing bottles Test tubes 28
Washing and Sterilization Equipment with configurable wash carts Test tubes and vials Volumetric flasks narrow neck Wide neck bottles Low capacity volumetric flasks Graduated cylinders Erlenmeyer flasks wide neck Erlenmeyer Flat or round flasks narrow bottom flask neck narrow neck Erlenmeyer flasks wide neck Centrifuge tubes Funnels Wide or narrow neck bottles Graduated cylinders Weighing Graduated bottles cylinders Imhoff cones 29
ccessories - Inserts and components Example of configuration based on C414 washing cart for WM and WM 8 glassware washer for simultaneous washing of ø 70 mm, ø 85 mm, and ø 100 mm glassware by the use of C057002 cap screws for closing injection nozzle seats. C1 insert with 28 spring hooks for laboratory glassware C3 net basket mm.120x120x120 4.72 x4.72 x4.72 C4 cover for C3 C97 2 positions insert for Petri dishes C8 mm 100h/3.93 h, C9 mm 130h/5.11 h C70 mm 200h/7.87 h C77 cover for C8/C9/C70 C8 net separator for 1/4 net basket Net cover for 121 positions test tubes wash carts (i.e. C421, C441, C723, C804...) C101 248x248x250h mm / 9.7 x9.7 x9.84 h C108 248x248x175h mm / 9.7 x9.7 x.89 h C1105 248x248x45h mm / 9.7 x9.7 x1.77 h (C1105 to be laid directly on top of the test tubes) C1150 djustable height net cover for 121 positions test tubes washing carts (i.e. C1148, C1149) dim. 35x35x255h mm / 14.37 x14.37 x10.04 h 30
Injection nozzle support C054925 Ø mm / H. 140 mm Ø 0.23 / H. 5.51 C05492 Ø mm / H. 18 mm Ø 0.23 / H. 7.32 Gasket for pipette Ø max 14mm/0.55, min 4mm/1. C05005 Cap for closing unused holes C05001 Ø 20 mm / H. 21 mm Ø 0.79 / H. 0.83 Injection nozzle bottle support Support for injection nozzle ø 2,5mm/0,01 C054915 Ø mm / H. 200 mm C05004 Ø 25 mm / H. 13 mm Ø 0.23 / H. 7.87 Ø 0.79 / H. 0.51 C05491 Ø mm / H. 130 mm Ø 0.23 / H. 5.11 Cap for closing unused holes C05001 Injector sleeve with silicone guard for pipettes (max pipette ø 11mm/0.43 ) C058902 Plastic cross ø 32mm/1.2 for injection nozzle ø 2,5mm/0.01 C054008 Plastic cone ø 15mm/0.59 for injection nozzle ø 2,5mm/0.01 C057007 Injection nozzle cap ø 4mm/0.15 for injection nozzle ø 2,5mm/0.01 C05400 ottle support ø 28mm/1.10 for injection nozzle ø mm/0.24 C054037 ottle support ø 33mm/1.30 for injection nozzle ø mm/0.24 C054038 ottle support ø 45mm/1.77 for injection nozzle ø mm/0.24 C054040 Plastic cross ø 54mm/2.13 for injection nozzle ø 4mm/0.57 C054009 Injection nozzle cap ø 5mm/0.2 for injection nozzle ø 4mm/0.15 C054005 Plastic cross ø 75mm/2.95 for injection nozzle ø mm/0.24 C402001 Stainless steel cross ø 87mm/3 7 / 1 for injection nozzle ø 8mm/ 5 / 1 C05493 Injection nozzle cap ø 10mm/0.39 for injection nozzle ø mm/0.24 C054007 Injection nozzle support for graduated cylinders ø 105mm/4 1 / 8 h=290mm/11 7 / 1 for injection nozzle ø 8mm/ 5 / 1 C05494 ø mm/ 1 / 4 daptor nipple for for injection nozzle ø 8mm/ 5 / 1 C057013 31
Injection nozzles types C D E C054930 C054924 C054904 C054921 C054910 C054922 C054905 C054959 4 0.15 5 0.2 54 2.13 75 2.95 50 1.97 4 0.15 5 0.2 54 2.13 110 4.33 80* 3.15* 4 0.15 5 0.2 54 2.13 175.89 130* 5.12* C D E 0.23 10 0.39 75 2.95 115 4.53 85 3.35 0.23 10 0.39 75 2.95 135 5.31 95* 3.74* 0.23 10 0.39 75 2.95 175.89 130* 5.12* 0.23 10 0.39 75 2.95 225 8.8 185* 7.28* 0.23 10 0.39 75 2.95 275 10.83 235* 9.25* C05490 C054914 C054953 C054903 C054943 C054908 C054911 C05490 C D E 2,5 0.1 4 0.15 15 0.59 80 3.15 75 2.95 2,5 0.1 4 0.15 15 0.59 80 3.15 75 2.95 2,5 0.1 4 0.15 32 1.2 50 1.97 30 1.18 2,5 0.1 4 0.15 32 1.2 80 3.15 0 2.3 2,5 0.1 4 0.15 32 1.2 155.10 135 5.31 C D E 0.23 10 0.39 75 2.95 135 5.31 105 4.13 0.23 10 0.39 75 2.95 225 8.8 185* 7.28* 0.23 10 0.39 75 2.95 275 10.83 235* 9.25* C054949 C054950 C054951 C054952 C05491 C054947 C054948 C05492 C D E 0.23 10 0.39 75 2.95 115 4.53 85 3.35 0.23 10 0.39 75 2.95 135 5.31 95* 3.74* 0.23 10 0.39 75 2.95 175.89 130* 5.12* 0.23 10 0.39 75 2.95 225 8.8 185* 7.28* 0.23 10 0.39 75 2.95 275 10.83 235* 9.25* C D E 0.23 10 0.39 0.23 10 0.39 0.23 10 0.39 flex flex flex 175.89 225 7.28 275 10.83 - - - bottle support ø 28mm / 1.10 code C054037 The * indicates the maximum dimension for the height regulation of nozzles with spring.
Injection nozzles types Empty version of the racks give the customer the possibility of full configuration. The tables show the maximum glassware diameter allowed in the washing cart frame and of the number related positions. + = It is possible to customize the washing cart frame by using different nozzles and/or accessories. Injection nozzles Nozzles are available in different height sizes. ccording to the glassware shape and dimension, nozzles should be chosen in order to have 10/90 mm clearance from the nozzle final tip and the glassware bottom. Some kind of nozzles are endowed with adjustable spring retainer. Spring retainers allow to place glassware of different heights on the same nozzle. 10 90 mm 0,4 3,54 ø Nozzle dimensions C057911 C057912 C057913 D ø C E The critical dimensions to be considered in choosing the suitable nozzle are the following: E dimension: for the correct coupling nozzle/glassware and the check of the distance nozzle/glassware. The * indicates the maximum dimension for the height regulation of nozzles with spring. C D E 8 5 / 1 8 5 / 1 8 5 / 1 17 17 17 11 / 1 11 / 1 11 / 1 87 87 105 3 7 / 1 3 7 / 1 4 1 / 8 255 320 320 10 1 / 1 12 5 / 8 12 5 / 8 235 300 300 9 1 / 4 11 13 / 1 11 13 / 1 D dimension + clearance: for the compatibility check washing machine/positioning level.
ICOS Pharma S.p.. Via E. Ellero, 15 33080 Cusano di Zoppola (PN) ITLY PHONE +39 0434 5772911 FX +39 0434 5772900 sales@icospharma.com www.icospharma.com member of Products offered for sale may differ from those described or illustrated in this brochure due to later production changes or/and optional configurations. The products and technical specifications are subjected to change without prior notice. Please consult your ICOS/COLUSSI dealer for the latest information. DC-PD-02-WM EN Rev.03