Equipment Decontamination System P19200 Page 1
The Equipment Decontamination System P19200 contains the necessary components to clean the response equipment at an oil spill site. The Equipment Decon Van contains a cleaning pool, a steam cleaner or saltwater pressure washer, a storage/shipping container, and the ancillary equipment to support the system while operating in the field. Oil spill response equipment requires extensive cleaning prior to demobilization and return to the warehouses. Without proper cleaning equipment, this task is difficult, time consuming, and costly. The Equipment Decon Van provides the full array of cleanup tools and materials necessary for efficient cleaning and demobilization of equipment. A major spill response operation may require several Equipment Decon Vans to expedite the time-consuming and costly cleaning process. System Components for ESSM No Nomenclature Type Qty NS Cont VA2119A VAN, EQUIPMENT DECON BL 1 Y CP0831 POOL, CLEANING, 30' X 70' X 18" Contents 1 CP3000 CONTAINMENT POOL, MCHRY, 5' X 5' X 12" Contents 1 CP3020 CONTAINMENT POOL, 6' X 4' X 12" ALTN CS0507 CLEANER, STEAM Contents 1 WA0820 WASHER, PRESSURE, SALTWATER, DSL ALTN HC0001 HOSE CLEANING MANIFOLD PALLET, 43" X 42" X 2 Contents 1 HC0002 HOSE CLEANING PIG LAUNCHER PALLET, 32" X 32" Contents 1 HC0004 PIG CATCHER Contents 1 PC0815 POOL, CLEANING, 10' X 10' X 12" Contents 1 PU2108 PUMP, DIAPHRAGM, 3", DIESEL Contents 1 TK0020 TANK, FAST ERECT, 2500-GAL, 12' X 12' X 28" Contents 1 CP3025 CONTAINMENT POOL, 14' X 14' X 18" ALTN VA2119B VAN, EQUIPMENT DECON ALTN VA2119C VAN, EQUIPMENT DECON ALTN VA2119D VAN, EQUIPMENT DECON ALTN VA2119E VAN, EQUIPMENT DECON ALTN Baseline verified on 1/8/2018, * Not shown in catalog. P19200 Alternates Page 2
ESSM - VA2119A VAN, EQUIPMENT DECON Equipment Decon Van VA2119A Equipment Decon Van VA2119A (Interior) Page 3
The Equipment Decon Van VA2119A/B/C/D/E is a modified 8' x 8' x 20' shipping container used to store and ship the oil spill response equipment cleaning system. The main components of the cleaning system are a highpressure steam cleaner or saltwater pressure washer, cleaning solvents, sorbents, brushes, hand tools, and cleaning pools. There are five configurations of the Equipment Decon Van; the configurations are functionally the same. The characteristics and inventories of each may vary slightly from one another. ESSM Facility Model VA2119A Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight 11176 lbs References Ref No Reference 1 None Page 4
EQUIPMENT DECONTAMINATION SYSTEM ESSM - CP0831 POOL, CLEANING, 30' X 70' X 18" 30' X 70' X18" Cleaning Pool CP0831 (Shipping Configuration) 30' X 70' X18" Cleaning Pool CP0831 (Operational Configuration) Page 5
The Cleaning Pool CP0831 is a rubber container in which pollution equipment can be cleaned after use on oil spills. The pool is large enough to hold two skimmers for cleaning. The pool contains the oil and chemicals from the equipment until it can be pumped out and transported to a disposal site. Basic Concepts Model BCI-CUR-A1-187X Shipping Operating Length 5 ft, 2 in 70 ft, 0 in Width 3 ft, 10 in 30 ft, 0 in Height 2 ft, 8 in 1 ft, 6 in Cube 53 cu ft 22 cu ft Footprint 20 sq ft 15 sq ft Weight 1010 lbs 1010 lbs References Ref No Reference 1 None Page 6
ESSM - CP3000 CONTAINMENT POOL, MCHRY, 5' X 5' X 12" 5' x 5' x 12" Machinery Containment Pool CP3000 (Shipping Configuration) 5' x 5' x 12" Machinery Containment Pool CP3000 (Operational Configuration) Page 7
The Machinery Containment Pool CP3000 is a 5' x 5' x 12" urethane berm. It is used to provide a means of catching and containing any oil, fuel, or contaminants leaking or spilled from the component that it is supporting. Basic Concepts Model 1003-00221-201A Shipping Operating Length 1 ft, 8 in 5 ft, 0 in Width 1 ft, 8 in 5 ft, 0 in Height 0 ft, 10 in 1 ft, 0 in Cube 3 cu ft 25 cu ft Footprint 3 sq ft 25 sq ft Weight 40 lbs 40 lbs References Ref No Reference 1 None Page 8
ESSM - CP3020 CONTAINMENT POOL, 6' X 4' X 12" 6' X 4' X 12" Containment Pool CP3020 The Machinery Containment Pool CP3020 is a 6' x 4' x 12" urethane berm. It is used to catch and contain any oil, fuel, hydraulic fluid, or contaminants leaking or spilled from diesel powered or hydraulically driven components. Basic Concepts Model 1003-00704-201A Shipping Operating Length 2 ft, 3 in 6 ft, 0 in Width 2 ft, 4 in 4 ft, 0 in Height 0 ft, 8 in 1 ft, 0 in Cube 4 cu ft 24 cu ft Footprint 6 sq ft 24 sq ft Weight 35 lbs 35 lbs Page 9
References Ref No Reference 1 None Page 10
ESSM - CS0507 CLEANER, STEAM Steam Cleaner CS0507 The Steam Cleaner CS0507 is a high pressure, hot water unit used to clean off oil, salt spray, and dirt by spraying a chemical cleaner on the equipment. The main components of the steam cleaner are a high pressure pump, diesel engine, oil fluid burner, heating coils, and a 60-cycle, 115-volt generator. Landa Model SDHW5-3000 Diesel Engine Kubota Cooled Water Cycle 4 Cylinders 1 Starter Electric Horsepower 13.5 Rpm 2200 Pump Page 11
General Pump Model TS2021 Type Tri-plunger oil bath Discharge capacity 4.4 gpm Operating pressure 3000 psig Operating temperature 200 F BTU/hour 380,000 Burner Oil-fired auto light Fuel type Kerosene/diesel Burner Motor Horsepower 1/8 Volts 115 V ac Hertz 60 Phase 1 Ignition Transformer Coil 105' of 1/2" schedule 80 pipe High pressure hose 3/8" ID x 50' wire braid Gun Insulated shutoff Nozzle (4 ea) 0, 15, 25, 40 Pressure control Variable pressure wand Chemical control Needle meter value Generator Volts 115 V ac Hertz 60 Amps 17.4 Shipping Length 4 ft, 11 in Width 3 ft, 4 in Height 3 ft, 10 in Cube 63 cu ft Page 12
Footprint 17 sq ft Weight 1236 lbs References Ref No Reference 1 Kubota Instruction Manual 2 Kubota Parts List Manual 3 Landa Operator s Manual SDHW5-3000 Page 13
ESSM - WA0820 WASHER, PRESSURE, SALTWATER, DSL Salt Water Pressure Washer WA0820 The Diesel Driven, Salt Water Pressure Washer WA0820 is a high pressure, hot water cleaner that is used to clean oil and dirt from equipment by spraying water and cleaner on the equipment at a high pressure and temperature. The pressure washer can use either fresh or salt water as a cleaning medium. The main components of the pressure washer are a high-pressure pump, diesel engine, oil-fired burner, and heating coils. Engine Ruggerini Cooling Air Cylinders 2 Bore/stroke 80mm/65mm Displacement 654 cm3 Horsepower 13 Operating rpm 3600 Compression ratio 19 : 1 Starting Electric Battery 12 V dc/60ah/300 amp Page 14
Fuel Diesel Fuel source: Engine 4-gal int. tank Burner 5-gal jerry can Fuel consumption: Engine.79 gph Burner @140 F 1.98 gph Pressure Washer Model Maximum pump pressure Water volume @min./max. press. Max. inlet water temp. Temp. range Self-priming max. lift KEW Industries KEW Contr Diesel 2610 psig 5.42/20.5 gal 95 degrees F/35 degrees C 86-302 degrees F/30-150 degrees C 16.5 ft Shipping Length 2 ft, 11 in Width 3 ft, 10 in Height 4 ft, 0 in Cube 45 cu ft Weight 435 lbs References Ref No Reference 1 Owner Manual for KEW Contractor Diesel 2 Use and Maintenance Manual for MD/1-MD/2 Engine Page 15
ESSM - HC0001 HOSE CLEANING MANIFOLD PALLET, 43" X 42" X 22" Hose Cleaning Manifold Pallet HC0001 The Hose Cleaning Manifold Pallet HC0001 is connected in-line with oil contaminated hoses, a cleaning tank filled with approved cleaning solvent, and a pump (used to circulate cleaning fluid). The manifold comes with a 4-inch and a 6-inch adapter manifold for the cleaning of either 4- or 6-inch hoses. Either of these adapter manifolds can be fitted with other adapters of different sizes to clean other hoses of different sizes. Once connected, the circulation pump is started and circulates the cleaning fluids through the hose until the hoses are clean. Diesel fuel is circulated through the hose first to break down the crude oil. After the hoses are flushed with diesel fuel they are then flushed with an approved cleaning solvent such as Citrikleen until the desired state of cleanliness is achieved. ESSM Facility Model HC0001 Shipping Length 3 ft, 6 in Width 3 ft, 8 in Height 2 ft, 0 in Cube 26 cu ft Page 16
Footprint 13 sq ft Weight 385 lbs References Ref No Reference 1 None Page 17
ESSM - HC0002 HOSE CLEANING PIG LAUNCHER PALLET, 32" X 32" X 26" Hose Cleaning Pig Launcher Pallet HC0002 The Hose Cleaning Pig Launcher Pallet HC0002 contains a 4-inch and a 6-inch manifold assembly that, when connected to the proper sized hose, launches either a 4- or 6-inch cleaning pig. The pig launcher can be used to clear the hose of crude oil after a transfer or to clear the hose after cleaning. ESSM Facility Model HC0002 Shipping Length 2 ft, 8 in Width 2 ft, 8 in Height 2 ft, 3 in Cube 16 cu ft Footprint 8 sq ft Weight 210 lbs Page 18
References Ref No Reference 1 None Page 19
ESSM - HC0004 PIG CATCHER Hose Cleaning Pig Catcher HC0004 The Hose Cleaning Pig Catcher HC0004 contains a 4-inch and 6-inch manifold assembly that when connected to the proper sized hose catches either a 4- or 6-inch cleaning pig. The pig catcher can be used to clear the hose of crude oil after a transfer or to clear the hose after cleaning. ESSM Facility Model HC0004 Shipping Length 2 ft, 7 in Width 2 ft, 11 in Height 2 ft, 3 in Cube 17 cu ft Footprint 8 sq ft Weight 265 lbs Page 20
References Ref No Reference 1 None Page 21
ESSM - PC0815 POOL, CLEANING, 10' X 10' X 12" 10' X 10' X 12" Cleaning Pool PC0815 The Cleaning Pool PC0815 is a 10' x 10' x 12 urethane berm. Its is used to catch and contain any oil, fuel, or contaminants leaked, spilled or cleaned from the component that it is supporting. Engineered Fabrics, Rockmart, GA Material Goodyear rubber Sides Inflatable pockets Length 2 ft, 4 in Width 1 ft, 9 in Height 1 ft, 3 in Volume (ft³) 6 cu ft Footprint (ft²) 5 sq ft Weight (lb) 68 lb Page 22
References Ref No Reference 1 None Page 23
ESSM - PU2108 PUMP, DIAPHRAGM, 3", DIESEL 3" Diesel Diaphragm Pump PU2108 3" Diesel Diaphragm Pump PU2108 Performance Curve Page 24
The 3" Pump PU2108 is a self-priming, diesel-driven, diaphragm pump that is designed to pump water and transfer viscous materials. The pump will pump water at a maximum rate of 100 gpm with a maximum discharge pressure of 10 psig. Maximum practical suction lift is 26 feet above the water surface. The pump is skid-mounted with two carrying handles that double as a protective roll cage. The pump is powered by a 1-cylinder, 4.2 hp, air-cooled, 4-cycle, diesel engine. The engine has a recoil starter and direct fuel injection with a variable speed control and is designed to operate off of its own integral fuel system. Pump C H & E Mfg. Co. Model 5500 Type Diaphragm Max. capacity 100 gpm @ 10 psig Engine Yanmar Diesel Engine Co. Model L40AE Cylinders 1 Bore/stroke 68 mm/55 mm Displacement 199 cm3 Compression ratio 20 : 1 Rpm 3600 Horsepower 4.2 Fuel Diesel Fuel source Integral fuel tank Fuel consumption 0.5 gph Shipping Operating Length 3 ft, 5 in 3 ft, 5 in Width 2 ft, 11 in 2 ft, 11 in Height 2 ft, 5 in 2 ft, 5 in Cube 25 cu ft 25 cu ft Footprint 10 sq ft 10 sq ft Weight 245 lbs 245 lbs Page 25
References Ref No Reference 1 Yanmar Service Manual for Model L-A Series Engine 2 Yanmar Operations Manual, Model L-A Series Engine 3 Yanmar Diesel Engine Parts Catalog, Pub. No. 00Y00R3981 Page 26
ESSM - TK0020 TANK, FAST ERECT, 2500-GAL, 12' X 12' X 28" 2500-Gallon Fast Erect Tank TK0020 The 2500-Gallon Fast Erect Tank TK0020 is designed for the primary containment of fuel. The tank is used for holding cleaning agent during the hose cleaning process. The unit consists of an aluminum frame and a 12' x 12' x 28" tank made of a nylon base fabric coated with urethane. Cooley Incorporated Style L3284NESU Construction Style 84 Base fabric: Weight 13 oz. per square yard (psy) Fiber Nylon Fabric count Fill Coated fabric: Total weight 32 oz psy Type of coating Urethane Coating distribution Face, 50; Back, 50 Color Tan Tensile strength 1000 lb grab, 600 1-inch strip pounds Page 27
Tear strength weight 40 lb Puncture resistance 175 psig Hydrostatic pressure 600 psig Temperature: Low -50 F High continuous 160 F Intermittent 180 F Drain 4-in female pipe flange Shipping Length 12 ft, 0 in Width 12 ft, 0 in Height 2 ft, 4 in Cube 336 cu ft Footprint 144 sq ft Weight 125 lbs References Ref No Reference 1 None Page 28
EQUIPMENT DECONTAMINATION SYSTEM ESSM - CP3025 CONTAINMENT POOL, 14' X 14' X 18" 14' X 14' X 18' Containment Pool CP3025 (Shipping Configuration) 14' X 14' X 18' Containment Pool CP3025 (Operational Configuration) Page 29
The Containment Pool CP3025 is a 14' x 14' x 18 urethane berm. It is used to catch and contain any oil, fuel, or contaminants leaked, spilled or cleaned from the component that it is supporting. Basic Concepts Model BCI-CUR-A1-037X Shipping Operating Length 3 ft, 1 in 14 ft, 0 in Width 2 ft, 8 in 14 ft, 0 in Height 0 ft, 8 in 1 ft, 6 in Cube 6 cu ft 294 cu ft Footprint 9 sq ft 196 sq ft Weight (lb) 165 lb 165 References Ref No Reference 1 None Page 30
ESSM - VA2119B VAN, EQUIPMENT DECON The Equipment Decon Van VA2119A/B/C/D/E is a modified 8' x 8' x 20' shipping container used to store and ship the oil spill response equipment cleaning system. The main components of the cleaning system are a highpressure steam cleaner or saltwater pressure washer, cleaning solvents, sorbents, brushes, hand tools, and cleaning pools. There are five configurations of the Equipment Decon Van; the configurations are functionally the same. The characteristics and inventories of each may vary slightly from one another. ESSM Facility Model VA2119B Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight 13175 lbs References Ref No Reference 1 None Page 31
ESSM - VA2119C VAN, EQUIPMENT DECON The Equipment Decon Van VA2119A/B/C/D/E is a modified 8' x 8' x 20' shipping container used to store and ship the oil spill response equipment cleaning system. The main components of the cleaning system are a highpressure steam cleaner or saltwater pressure washer, cleaning solvents, sorbents, brushes, hand tools, and cleaning pools. There are five configurations of the Equipment Decon Van; the configurations are functionally the same. The characteristics and inventories of each may vary slightly from one another. ESSM Facility Model VA2119C Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight 14940 lbs References Ref No Reference 1 None Page 32
ESSM - VA2119D VAN, EQUIPMENT DECON The Equipment Decon Van VA2119A/B/C/D/E is a modified 8' x 8' x 20' shipping container used to store and ship the oil spill response equipment cleaning system. The main components of the cleaning system are a highpressure steam cleaner or saltwater pressure washer, cleaning solvents, sorbents, brushes, hand tools, and cleaning pools. There are five configurations of the Equipment Decon Van; the configurations are functionally the same. The characteristics and inventories of each may vary slightly from one another. ESSM Facility Model VA2119D Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight 14940 lbs References Ref No Reference 1 None Page 33
ESSM - VA2119E VAN, EQUIPMENT DECON The Equipment Decon Van VA2119A/B/C/D/E is a modified 8' x 8' x 20' shipping container used to store and ship the oil spill response equipment cleaning system. The main components of the cleaning system are a highpressure steam cleaner or saltwater pressure washer, cleaning solvents, sorbents, brushes, hand tools, and cleaning pools. There are five configurations of the Equipment Decon Van; the configurations are functionally the same. The characteristics and inventories of each may vary slightly from one another. ESSM Facility Model VA2119E Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight 11176 lbs References Ref No Reference 1 None Page 34