Movement-based energy control

04 Movement-based energy control 94 International catalogue 2015

4.1 Microwave-based movement sensors 4.2 PIR-based movement sensors 4.2.1 Ceiling-mount 4.2.2 Wall-mount 4.3 Twilight switches 4.4 LED lights with sensor 4.5 Smoke detectors International catalogue 2015 95

PRESENCE DETECTION CONTROL Presence detectors are devices designed to detect moving heat sources within there feel of action and they turn the light on and off automatically. 1 PIR Technology How do they do it? Using passive infrared technology. Research and technology have developed highly sensitive sensors of infrared electromagnetic waves that are not visible to the human eye. For example, thermometers for measuring temperature or pyroelectric detectors for measuring radiated heat are devices designed to detect electromagnetic waves in the infrared spectrum. A "passive infrared detector" (PIR for short) records electromagnetic emissions with a wavelength of 5-20 microns, which includes the heat radiation of people or animals. The sensor converts the thermal radiation of moving objects into electrical signals. The sensors themselves do not emit any radiation, which is why they are known as passive infrared sensors (PIR). 96 International catalogue 2015

FRESNEL sensor-lens system A multi-segment FRESNEL lens is placed in front of the passive infrared sensor (PIR), which divides the area covered by the detector into a number of segments, so that they concentrate the infrared radiation received from the environment. Each segment registers room temperature at rest, i.e. without movement, so that when the moving heat source crosses a segment, it registers a change in temperature. When two consecutive segments are crossed by the moving body, an electrical signal that activates a relay output is generated under certain conditions, i.e. movement is captured. Due to its operating principle, the movement is best detected when the detector is transversal, not frontal. Therefore two cover areas are differentiated in the sensor, depending on how the movement occurs. The light fitting will be activated when not only movement is captured, but also the light level demanded by the user is greater than the ambient light level when the movement occurs. In addition, the sensors time the lighting for a certain period after the movement so that, when people are still for short periods, the light does not go out. Typical applications PRIVATE USE Rooms Corridors Bathrooms Basements and attics Garages Parking COMMERCIAL USE Stairs Hotel corridors Lift landings Corridors WCs Terraces POINTS OF LIGHT Workshops Entrance lamps Loading docks International catalogue 2015 97

Installation recommendations Is important to note the following points during planning and installation, so that the detectors operate in optimum fashion: - The cover area increases proportionally with the height of the installation. At the same time, sensitivity is reduced and the individual segments are increased. - For optimum detection, the movement must be transverse to the point of installation, i.e. the segments must be cut laterally. - If someone comes to the front detector, it is more difficult for the sensor to register a temperature change, leading to a smaller coverage area. - Fluctuations in ambient temperature caused by the seasons make detection conditions change. For example, in winter there is a greater difference between room temperature and human body temperature, which favours detection and increases the coverage area; however, people wear more clothes in winter and therefore the body does not give off so many infrared waves. - Atmospheric phenomena such as rain, snow or fog can cause a decrease in the sensitivity of the detector and a reduction in its coverage area, since they absorb infrared waves and therefore the amount of infrared radiation that reaches the sensor is lower. When selecting the point of installation, it is important to consider the following facts, which may cause interference: - Animals, such as cats or dogs. - Plants in motion, such as trees or shrubs. - Fans and radiators. - Lamps installed near the sensor. - The detector must have an unobstructed field of view, since the infrared waves can not pass through doors, windows, glass partitions, etc. 98 International catalogue 2015

2 Microwave Technology Unlike PIR technology, microwave sensors (HF - High Frequency) only need movement for detection. Microwave sensors have an antenna that transmits ambient radiation waves at a frequency within the microwave spectrum. If an intruder enters the environment, the waves will be reflected on it and back to the device with a frequency offset (Doppler effect), then the sensor will enter alarm status. This technology is active and more sensitive than PIR. It detects extremely small movements and, therefore, is ideal for detecting presence in offices, classrooms, etc. where people "sit still". Another advantage of HF technology is that the sensor does not need to "see" what is being detected, which can almost be hidden. Therefore, the sensor can be hidden in false ceilings, inside walls or behind thin, non-metallic objects. Furthermore, the microwave sensor is insensitive to dirt, unlike the PIR lens, where the performance is degraded if it is soiled, for example, in a dusty environment. The microwave sensor is not affected by the temperature difference that can occur in different seasons; it is more stable than other technologies. Typical applications PRIVATE OR COMMERCIAL USE Dusty-areas with dirt or obstructions such as warehouses or car parks. -Areas with draughts or vibrations. -Areas with activities that involve low-level mobility, workshops, offices, etc. -Areas with temperature changes. -Areas that need hidden sensors for aesthetic reasons or for security. Installation recommendations The following must be taken into account for the installation: The opening angle and range, and correct installation height. If more than one microwave sensor is used, they must operate at different frequencies to prevent them from interfering with each other. No sensors should be installed facing each other. They must not be installed facing windows because microwaves pass through the glass International catalogue 2015 99

4.1 Microwave-based movement sensors KDP16 360FP-HF Microwave technology movement sensor (5.8GHz). Surface ceiling mounting. Typical applications: specially suitable for dusty areas or areas with temperature changes, warehouses, garages, etc. Article Code Packaging Power Description 110-130 V 60 Hz KDP16 360FP-HF 0767800 1 KDP16 360FP-HF-127 8767800 1 220V-240V 50 Hz 110V-130V 60 Hz Installation height: 1.5-3.5m Max. sensing distance: Ø 16mm, adjustable Set time: 10 s. to 12 min., adjustable Twilight Range: <3-2000LUX, adjustable Loads type Max (230V/127V).: - Incandescent: 1200W - 800W - Halogen: 1200W - 800W - Fluorescent: 300W - 200W - Lamp. Low consumption 300W - 200W - LED: 300W - 200W IP 20 KDP18 360FP-HF Microwave technology movement sensor (5.8GHz). Flush-mount ceiling mounting. Typical applications: specially suitable for dusty areas or areas with temperature changes, warehouses, garages, etc. Article Code Packaging Power Description 110-130 V 60 Hz KDP18 360FP-HF 0767802 1 KDP18 360FP-HF-127 8767802 1 220V-240V 50 Hz 110V-130V 60 Hz Installation height: 1.5-3.5m Max. detection distance: Ø 16mm, adjustable Time adjustment: 10 s. to 12 min., adjustable Twilight Range: <3-2000LUX, adjustable Loads type Max (230V/127V).: - Incandescent: 1200W - 800W - Halogen: 1200W - 800W - Fluorescent: 300W - 200W - Lamp. Low consumption 300W - 200W - LED: 300W - 200W IP 20 100 International catalogue 2015

4.1 Microwave-based movement sensors KDP17 360FP-HF Microwave technology movement sensor (5.8GHz). Wall mounting. Typical applications: specially suitable for dusty areas or areas with temperature changes, warehouses, garages, etc. Article Code Packaging Power Description 110-130 V 60 Hz KDP17 360FP-HF 0767801 1 KDP17 360FP-HF-127 8767801 1 220V-240V 50 Hz 110V-130V 60 Hz Installation height: 1.5-3.5m Max. sensing distance: - Wall: 15 m. adjustable - Roof: 16 m. Ø Adjustable Time adjustment: 10 s. to 12 min., adjustable Twilight Range: <3-2000LUX, adjustable Loads type Max (230V/127V).: - Incandescent: 1200W - 800W - Halogen: 1200W - 800W - Fluorescent: 300W - 200W - Lamp. Low consumption 300W - 200W - LED: 300W - 200W IP 44 PHOTO1. Great heights sensor Microwave technology movement sensor (5.8GHz). Surface or flush mount ceiling (as accessories). Typical applications can be installed at heights of 10 metres, suitable for use in buildings with high ceilings such as warehouses or gyms. Compatible with KDP5 remote control. Article Code Packaging Description KDP5 0775866 1 Power supply: 220-240V/AC Installation height: 2.5-5m/5,5-10m Detection distance: Ø 14-10m, Adjustable Time adjustment: 10 s. 30 min., (adjustable) + pulse 1s Twilight Range: 10-2000LUX Adjustable type loads (max.): - Incandescent: 1200W - Halogen: 1000W - Fluorescent: 900VA/100uF - Lamp. Low consumption 600VA/400W - LED: 400W IP 40 with accessory to embed 0775876 IP 54 with accessory for surface 0775877 KDP3/5 ACCESSORIES FP 0775876 1 Flush-mount accessory KDP3/5 SURFACE ACCESSORY 0775877 1 Accessory for surface mounting International catalogue 2015 101

PIR detectors 4.2/4.2.1 Ceiling mount KDP1 360FP. Flush-mount sensor Flush or surface mount in ceiling (with accessory). Typical applications: ideal for use in industrial, residential and commercial installations. Its adjustable time and light selectors adjust to your needs according to different on and off functions. KDP1 0775860 1 KDP1 surface mount accessory Installation height: 2.5m Max. detection distance: Ø 7m adjustable Time adjustment: 5sec. 30min (adjustable) + pulse 1s Twilight range 10-2000LUX (adjustable) type loads (max.): - Incandescent: 2000W - Halogen: 1000W - Fluorescent: 900VA/100uF - Low consumption lamp: 600VA/400W - LED: 500VA/400W IP 40 flush mounting IP 44 with surface mount accessory 0775861 0775861 1 Accessory for surface mounting KDP19 360S Surface ceiling mounting. Typical applications: ideal for use in industrial installations, residential and commercial installations. Its adjustable time selectors and light selectors adjust to your needs according to different on and off functions. KDP19 360S 0767807 1 Installation height: 2.2-4m Max. detection distance: Ø 12mm, adjustable Time adjustment: 7min 10sec (adjustable) Twilight Range: 3-2000LUX (adjustable) Type loads (max.): - Incandescent: 1200W - Halogen: 1200W - Fluorescent: 300W - Low consumption lamp: 300W - LED: 300W IP 20 surface mount 102 International catalogue 2015

PIR detectors 4.2/4.2.1 Ceiling mount KDP2 360FP. Flush-mount sensor NEXT INCORPORATION Ceiling flush mount. Typical applications: ideal for use in industrial installations, residential and commercial installations. Its dual relay enables control of two channels separately (one for lighting control, and one for activating air conditioning, ventilation, heating or alarm). KDP2 0775862 1 Installation height: 2.5 m Max. detection distance: Ø 7m adjustable Time adjustment: 5sec. to 30 min. (Adjustable) Twilight range 10-2000LUX (adjustable) Type loads (max.): - Incandescent: 2000W - Halogen: 1000W - Fluorescent: 300VA/150W - Low consumption lamp: 250VA/150W - LED: 150W IP 44 Compatible with remote KDP 360 KDP3 flush mount sensor PIR motion detector technology. Ceiling flush mount. Typical applications: flush mount sensor for automatic control of lighting. With it you can select the desired values for lighting and on/off times at low cost and with energy savings. Specially designed for use at home, in stores, offices, conference rooms, classrooms, etc. KDP3 0775863 1 KDP3/5 ACCESSORIES FP 0775876 1 Flush-mount accessory Installation height: 2.5 Max. detection distance: Ø 8mm adjustable Time adjustment: 10 sec. 30 min. (Adjustable) Twilight range 10-2000LUX (adjustable) Type loads (max.): - Incandescent: 2000W - Halogen: 1000W - Fluorescent: 900VA/100uF - Low consumption lamp: 600VA/400W - LED: 500VA/400W IP 40 with accessory for flush mount 0775876 IP 54 with accessory for surface mount 0775877 Compatible with KDP remote control KDP3/5 SURFACE ACCESSORY 0775877 1 Accessory for surface mounting International catalogue 2015 103

PIR sensors 4.2/4.2.1 Ceiling mount KDP4 FP. Sensor for large surfaces Range of motion sensors for large surfaces, up to 20m. Set of latest-generation lenses that make it possible to cover a large area. Timing: from 5 sec. to 30 min. Protection grade IP44 Suitable for incandescent, halogen and fluorescent lamps Optional remote control. Programmable with KDP remote control. Load control according to motion detection and twilight level. Twilight setting of 10-2000 lux. Power supply: AC, 50-60 Hz. KDP4 FP 0775880 1 Maximum range at h = 2.5m: ø = 20m Supply voltage: /50-60 Hz Type loads (max.): - Incandescent: 2000W - Halogen: 100W - Fluorescent: 900VA/100 uf - Low consumption lamp: 600VA/400W - LED: 500 VA/400W EFIMAT 360 Surface ceiling mounting. Typical applications: ideal for use in industrial installations, residential and commercial installations. Its adjustable time selectors and light selectors adjust to your needs according to different on and off functions. 110-130 V 60 Hz EFIMAT 360 0713103 1 Power: 127V-60Hz Installation height: 2.2-4m Maximum detection distance: 12mm (diameter) Time adjustment: 7min to 5sec (adjustable) Twilight Range: 10-2000LUX (adjustable) Type loads (max.): - Incandescent: 800W - Halogen: 800W - Fluorescent: 200W - Low consumption lamp: 200W - LED: 200W IP 20 104 International catalogue 2015

PIR sensors 4.2/4.2.1 Ceiling mount KDP20 360FP Ceiling flush mount. Typical applications: flush mount sensor for automatic control of lighting. With it you can select the desired values for lighting and on/off times at low cost and with energy savings. Specially designed for use at home, in stores, offices, conference rooms, classrooms, etc. Article Code Packaging Power Description 110-130 V 60 Hz KDP20 360FP 0767810 1 360FP-127 KDP20 8767810 1 220V-240V 50 Hz 110V-130V 60 Hz Installation height: 2-2.4m Detection distance: Ø 6m. Time adjustment: 10 sec. 15 min. (Adjustable) Twilight range: 3-2000LUX (adjustable) Loads type Max (230V/127V).: - Incandescent: 800W - 500W - Halogen: 800W - 500W - Fluorescent: 400W - 200W - Low consumption lamp: 400W - 200W - LED: 400W - 200W IP 20 KDP21 360FP Ceiling flush mount. Typical applications: flush mount sensor for automatic control of lighting. With you can select the desired values for lighting and on/off times at low cost and with energy savings. Specially designed for use at home, in stores, offices, conference rooms, classrooms, etc. KDP21 360FP 0767811 1 Installation height: 2-2.4m Detection distance: max. Ø 6m. Time adjustment: 10 sec. 15 min. (Adjustable) Twilight Range: 3-2000LUX (adjustable) Type loads (max.): - Incandescent: 1200W - Halogen: 1200W - Fluorescent: 300W - Low consumption lamp: 300W - LED: 300W IP 20 International catalogue 2015 105

PIR sensors 4.2/4.2.1 Ceiling mount KDP4 GS20 Ceiling mounting surface. Typical Applications: suitable for covering large areas (up to 4x20m). KDP4 GS20 0775865 1 Installation height: 2.2-6m Detection distance: Ø 20mm. Time adjustment: 10 sec. 30 min. (Adjustable) Twilight Range: 3-2000LUX (adjustable) Type loads (max.): - Incandescent: 2000W - Halogen: 2000W - Fluorescent: 1000W - Low consumption lamp: 1000W - LED: 1000W IP 20 KDP GA10 Ceiling mounting surface. Typical applications: It can be installed at heights of 10 metres, suitable for use in buildings with high ceilings such as warehouses or gyms. Article Code Packaging Power Description 110-130 V 60 Hz KDP GA10 0767808 1 220 KDP GA10-127 8767808 1 110 Installation height: 4-10m Detection distance: max 4x20m. Time adjustment: 10 sec. 30 min. (Adjustable) Twilight Range: 3-2000LUX (adjustable) Loads type Max (230V/127V).: - Incandescent: 2000W - 1000W - Halogen: 2000W - 1000W - Fluorescent: 1000W - 500W - Low consumption lamp: 1000W - 500W - LED: 1000W - 500W IP 20 106 International catalogue 2015

PIR sensors 4.2/4.2.1 Ceiling mount KDP9 360 mini Ceiling flush mount. Typical applications: ceiling-mount presents sensor for medium-sized interiors, such as offices, warehouses, kitchens, public toilets for automatic lighting control. KDP9 0775864 1 Installation height: 2.5m Detection distance: 6m Time adjustment: 1min/5min/10min/15min + pulse 1sg Twilight Range: 3-2000LUX (adjustable) Type loads (max.): Incandescent: 2000W. Halogen: 1000W Fluorescent: 900VA/100uF IP 40 (IP 20 power unit) KDP9 360 supermini Ceiling flush mount. Typical applications: ceiling-mount presence sensor for medium-sized interiors, such as offices, warehouses, kitchens, public toilets for automatic lighting control. KDP9 360 supermini 0767812 1 Installation height: 2-3m (wall)/ 2.2-4m-2.5m (ceiling) Detection angle: 120/360 Detection distance: 3m/6m Ø. Time adjustment: 5sec, 30sec, 1min, 3min, 5min, 8min (adjustable) Twilight Range: 10-2000LUX (adjustable) Loads type (Max.): Incandescent: 800W. Halogen: 800W fluorescent: 200W Lamp. low consumption: 200W and LED: 200W IP 20 Remote control KDP remote control 0775874 1 Control for models KDP 2 KDP 3 KDP5 remote control 0775878 1 Control for model KPD 5 International catalogue 2015 107

PIR sensors 4.2/4.2.2 Wall mount KDP6. Wall-mount sensor Wall and ceiling mounting. Typical applications: infrared with automatic switch for indoors and outdoors. Its programming off and on will let you save energy. It is ideal for use in supermarkets, shops and factories and to control lighting in the home and office. KDP6 110 0775867 1 KDP6 180 0775868 1 KDP6 270 0775869 1 Installation height: 2-3m Detection angle: 110/180/270 Detection distance: up to 10m (selectable) Set time: 6 sec., 10 min., Twilight Range: 10-2000LUX (adjustable) type loads (max.): - Incandescent: 1000W (KDP6110/180), 1840W (KDP6 270) - Halogen: 500W (KDP6 110/180), 1000W (KDP6 270) - Fluorescent: 400VA (KDP6 270) IP 44 KDP10 180W Wall. Typical applications: infrared with automatic switch for indoors and outdoors. Its programming off and on will let you save energy. It is ideal for use in supermarkets, shops and factories and to control lighting in the home and office. KDP10 180W 0767805 1 Installation height: 1.8-2.5m Detection angle: 180º Detection distance: up to 12m (> 24ºC)) Set time: 10 sec., 7min. Twilight Range: 3-2000LUX (adjustable) type loads (max.): - Incandescent: 1200W - Halogen: 1200W - Fluorescent: 300W - Low consumption lamp: 300W - LED: 300W IP 44 108 International catalogue 2015

PIR sensors 4.2/4.2.2 Wall mount KDP7. Surface-mount sensor Mounting on wall surfaces. Typical Applications: Ideal for use in corridors, stairways, bathrooms tools, basements, garages, etc. KDP7 150 0775870 1 KDP7 180 0775871 1 Installation height: 2m Detection angle: 150th Detection distance: up to 12m (> 24ºC)) Set time: 5sec. to 12min. Twilight Range: 5-2000LUX (adjustable) Loads type (Max.): Incandescent: 1000W. Halogen: 500W fluorescent: 200W Lamp. low consumption: 150W LED: 100W IP 44 Installation height: 2m Detection angle: 180 Detection distance: up to 12m (> 24ºC)) Set time: 5sec. to 12 min. Twilight Range: 5-2000LUX (adjustable) Loads type (Max.): Incandescent: 1000W. Halogen: 500W fluorescent: 200W Lamp. low consumption: 150W LED: 100W IP 44 KDP11 180W Mounting on wall surfaces. Typical Applications: Ideal for use in corridors, stairways, bathrooms tools, basements, garages, etc. KDP11 180W 0767803 1 Installation height: 1.8-2.5m Detection angle: 180º Detection distance: max. 12m (> 24ºC)) Set time: 10 sec., 7 min. Twilight Range: 3-2000LUX (adjustable) type loads (max.): - Incandescent: 1200W - Halogen: 1200W - Fluorescent: 300W - Low consumption lamp 300W - LED: 300W IP 44 International catalogue 2015 109

PIR sensors 4.2/4.2.2 Wall mount KDP12 180W IP65 Surface mount wall. Typical Applications: Ideal for use in corridors, stairways, bathrooms tools, basements, garages, etc. and in environments with dirt/ dust or outdoors. 110-130 V 60 Hz KDP12 180W IP65 0767804 1 KDP12 180W IP65-127 8767804 1 Installation height: 1.8-2.5m Detection angle: 180º Detection distance: max. 12m (> 24ºC)) Set time: 10sec., 7 min. Twilight Range: 3-2000LUX (adjustable) Loads type Max (230V/127V).: - Incandescent: 1200W - 800W - Halogen: 1200W - 800W - Fluorescent: 300W - 200W - Low consumption lamp 300W - 200W - LED: 300W - 200W IP 65 KDP15 360W Wall and corner mount. Typical Applications: Ideal for use in corridors, stairways, bathrooms tools, basements, garages. KDP15 360W 0767806 1 Installation height: 1.8-2.5m Detection distance: max. 12m (> 24ºC)) Set time: 10 sec., 7 min. Twilight Range: 3-2000LUX (adjustable) type loads (max.): - Incandescent: 1200W - Halogen: 1200W - Fluorescent: 300W - Low consumption lamp 300W - LED: 300W IP 44 110 International catalogue 2015

PIR sensors 4.2/4.2.2 Wall mount PHOTO1. Two-wire detector Wall flush-mount (monoblock). Typical applications: wall sensor with a switch that lets you control lighting. It is an apparatus for indoor use only. It is ideal for not very large spaces, shops, offices, homes, etc. KDP8 2H 0775872 1 Installation height: 0.8-1.2m Detection angle: 180º Detection distance: max. 8m Set time: 6s. to 12 min. Twilight Range: 5-2000LUX (adjustable) type loads (max.): Incandescent: 400W. Halogen: 400W IP 20 PHOTO1. Three-wire detector Wall flush-mount (monoblock). Typical applications: wall sensor with a switch that lets you control lighting. It is an apparatus for indoor use only. It is ideal for not very large spaces, shops, offices, homes, etc. KDP8 3H 0775873 1 Installation height: 0.8-1.2m Detection angle: 180º Detection distance: max. 8m Set time: 6s to 12 min. Twilight Range: 5-2000LUX (adjustable) type loads (max.): - Incandescent: 1600W - Fluorescent: 300VA max. - Halogen: 300W - Low power consumption: 120VA max. - LED: 120W. IP 20 International catalogue 2015 111

PIR sensors 4.2/4.2.2 Wall mount KDPT-01 Motion detector PIR technology with built-in buzzer Surface Mount. Typical Applications: ideal for alert of access to commercial establishments It Includes alarm/off/buzzer mode selector KDPT-01 0713110 1 Power supply: 9V dc Detection angle: 140th Maximum detection distance: 8m (diameter) Sound level:> 70dB IP 20 112 International catalogue 2015

International catalogue 2015 113

Summary table motion detectors FUNCTIONS Reference Technology Installation. Installation height Ver. Detection angle Detection distance KDP16 360FP-HF KDP16 360FP-HF-127 0767800 8767800 Microwave (5.8GHz) Ceiling (surface) 1.5-3.5m 220-240Vac 110-130Vac 360º Max. 8m KDP17 360FP-HF KDP17 360FP-HF-127 0767801 8767801 Microwave (5.8GHz) Wall 1.5-3.5m 220-240Vac 110-130Vac 180/360 Max. 8m KDP18 360FP-HF KDP18 360FP-HF-127 0767802 8767802 Microwave (5.8GHz) Ceiling (flush-mount) 1.5-3.5m 220-240Vac 110-130Vac 360º Max. 8m KDP5 0775866 Microwave (5.8GHz) * Ceiling (surface + Built) 2.5-10m 220-240Vac 360º Max. 14m KDP1-360FP 0775860 PIR * Ceiling (surface +Built) 2.5m 220-240Vac 360º Max. 7m KDP 19,360 FP 0767807 PIR Ceiling (surface) 2.2-4m 220-240Vac 360º Max. 12m KDP2 0775862 PIR Ceiling (flush-mount) 2.5m 220-240Vac 360º Max. 7m KDP3 0775863 PIR Ceiling (surface + Built) 2.5m 220-240Vac 360º Max. 8m KDP20 360FP 360FP-127 KDP20 0767810 8767810 PIR Ceiling (flush-mount) 2-2.4m 220-240Vac 110-130Vac 360º Max. 6m KDP21 360FP 0767811 PIR Ceiling (flush-mount) 2-2.4m 220-240Vac 360º Max. 6m KDP4 GS20 0775865 PIR Ceiling (surface) 2.2-6m 220-240Vac 360º 4x20m KDP GA10 KDP GA10-127 0767808 8767808 PIR Ceiling (surface) 4-10m 220-240Vac 110-130Vac 360º 4x20m KDP9 360 mini 0775864 PIR Ceiling (flush-mount) 2.5m 220-240Vac 360º Max. 6m KDP9 360 supermini 0767812 PIR Ceiling/wall (flush-mount) 1.8-2.5m 2.2-4m 220-240Vac 120/360 Max. 3/6m KDP6 110 0775867 PIR Ceiling and wall (surface) 2-3m 220-240Vac 110th Max. 10m KDP6 180 0775868 PIR Ceiling and wall (surface) 2-3m 220-240Vac 180º Max. 10m KDP6 270 0775869 PIR Ceiling and wall (surface) 2-3m 220-240Vac 270 Max. 10m KDP10 180W 0767805 PIR Wall (surface) 1.8-2.5m 220-240Vac 180º Max. 12m KDP7 150 0775870 PIR Wall (surface) 2m 220-240Vac 150th Max. 12m KDP7 180 0775871 PIR Wall (surface) 2m 220-240Vac 180º Max. 12m KDP11 180W 0767803 PIR Wall (surface) 1.8-2.5m 220-240Vac 180º Max. 12m KDP12 180W IP65 KDP12 180W IP65-127 0767804 8767804 PIR Wall (surface) 1.8-2.5m 220-240Vac 110-130Vac 180º Max. 12m KDP15 180W 0767806 PIR Ceiling/Wall (surface and corners) 1.8-2.5m 220-240Vac 360º Max. 12m KDP8 2H 0775872 PIR Wall (box with mechanisms) 0.8-1.2m 220-240Vac 180º Max. 8m KDP8 3H 0775873 PIR Wall (monoblock) 0.8-1.2m 220-240Vac 180º Max. 8m 114 International catalogue 2015

Summary table motion detectors Adjustment Timer Brightness adjustment IP Loads Remote control Remarkable 10-12' 3-2000Lux 20 10-12' 3-2000Lux 44 10-12' 3-2000Lux 20 Incandescent: 1200W/800W Halogen: 1200W/800W Fluorescent: 300W/200W Low power consumption: 300W/200W LED: 300W/200W Incandescent: 1200W/800W Halogen: 1200W/800W Fluorescent: 300W/200W Low power consumption: 300W/200W LED: 300W/200W Incandescent: 1200W/800W Halogen: 1200W/800W Fluorescent: 300W/200W Low power consumption: 300W/200W LED: 300W/200W 10"-30' 1 s. 10-2000Lux * 40/54 Incandescent: 2000W Halogen: 1000W Fluorescent. 900VA/100uF Low consumption 600VA/400W LED: 500VA/400W KDP5 High altitudes 5"-30' 1 s. 10-2000Lux * 40/44 Incandescent: 2000W Halogen: 1000W Fluorescent. 900VA/100uF Low consumption 600VA/400W LED: 500VA/400W 10"-7' 3-2000Lux 20 Incandescent: 1200W, Halogen: 1200W, Fluorescent: 300W Low power consumption: 300W LED: 300W 5"-30' 1 s. 10-2000Lux 44 Incandescent: 2000W Halogen: 1000W Fluorescent: 300VA/150W Low consumption 250VA/150W LED: 150W KDP Double channel 10"-30' 1 s. 10-2000Lux * 40/54 Incandescent: 2000W Halogen: 1000W Fluorescent: 300VA/150W Low power consumption: 250VA/150W LED: 150W KDP 10"-7' 3-2000Lux 20 Incandescent: 800W/500W Halogen: 800W/500W Fluorescent: 400W/200W Low power consumption: 400W/200W LED: 400W/200W 10"-7' 3-2000Lux 20 Incandescent: 1200W, Halogen: 1200W. Fluoresc.: 300W Low power consumption: 300W LED: 300W 10"-30' 3-2000Lux 20 Incandescent: 2000W Halogen: 2000W, Fluorescent: 1000W Low consumption 1000W, LED: 1000W Large stores 10"-30' 3-2000Lux 20 Incandescent: 2000W/1000W Halogen: 2000W/1000W Fluorescent: 1000W/500W Low power consumption: 1000W/500W LED: 1000W/500W Large heights and surfaces 1 '/5'/10 '/15'/ 1 s. 3-2000Lux 40 Incandescent: 2000W Halogen: 1000W Fluorescent: 900VA/uF 5"/30"/1 '/3'/5'/8' 10-2000Lux 20 Incandescent: 800W Halogen: 800W, Fluorescent: 200W Low consumption 200W LED: 200W 6"-10' 1 s. 10-2000Lux 44 Incandescent: 1000W Halogen: 500W 6"-10' 1 s. 10-2000Lux 44 Incandescent: 1000W Halogen: 500W 6"-10' 1 s. 10-2000Lux 44 Incandescent: 1000W Halogen: 500W Fluorescent: 400VA 10"-7' 3-2000Lux 44 5"-12' 5-2000Lux 44 5"-12' 5-2000Lux 44 10"-7' 3-2000Lux 44 10"-7' 3-2000Lux 65 10"-7' 3-2000Lux 44 Incandescent: 1200W, Halogen: 1200W Fluorescent 300W Low power consumption: 300W LED: 300W Incandescent: 1000W Halogen: 500W Fluorescent: 200W Low power consumption: 150W LED: 100W Incandescent: 1000W Halogen: 500W Fluorescent: 200W Low power consumption: 150W LED: 100W Incandescent: 1200W, Halogen: 1200W, Fluorescent: 300W Low consumption 300W LED: 300W Incandescent: 1200W/800W Halogen: 1200W/800W Fluorescent: 300W/200W Low power consumption: 300W/200W LED: 300W/200W Incandescent: 1200W, Halogen: 1200W, Fluorescent: 300W Low consumption 300W LED: 300W IP65 6"-12' 5-2000Lux 20 Incandescent: 400W halogen: 400W Connection 2h. 6"-12' 5-2000Lux 20 Incandescent: 1600W, Fluorescent: 300VA max, halogen. 300W Low consumption 200VA max LED.: 120W. Connecting 3h. International catalogue 2015 115

4.3 Twilight switches PHOTO1. Twilight switch Twilight switch. Wall. Typical applications: the KIC1 with LUX adjustment is a twilight switch for turning incandescent and fluorescent lamps on and off. KIC1 0775875 1 Power supply: 220-240V (50Hz) Twilight Range: 5-2000LUX (adjustable) Status: Red LED ON/OFF Set delay time: ON 60sec. /OFF 60 sec. after LED ON or OFF type loads (max.): - Incandescent: 10A - Fluorescent: 3A Working temperature: -25 to 45ºC IP 44 KIC2. Twilight switch Twilight switch. DIN rail. Typical applications: the KIC2 with LUX adjustment is a twilight switch for automatic turning on and off of incandescent and fluorescent lamps. For soiled environments, dust or outdoors. KIC2 0767818 1 V supply: 220-240V (50Hz) Twilight Range: 2-100LUX (adjustable) Contact capacity: 20A IP 65 116 International catalogue 2015

4.3 Twilight switches Photocells Surface Mount. Typical Applications: ideal for automatic lighting control IP44 110-130 V 60 Hz KOBALIGHT 0713101 1 Twilight threshold cut: 10-25 Lux 120V-220V 10A 1200W Blue Colour KOBALIGHT ACCS 0713102 1 Bracket Set - photocell receptacle KOBALIGHT KOBALIGHT RECEP 0713108 1 KOBALIGHT photocell receptacle MENS KOBALIGHT 0713109 1 KOBALIGHT Photocell KOBALIGHT ACCS KOBALIGHT RECEP MENS KOBALIGHT International catalogue 2015 117

4.4 LED lights with sensor KLD1 Lamp with sensor. LED and PIR Technology. Typical applications: efficient interior lighting. KLD1 0767813 1 Installation height: 2-2.4m Detection distance: 3m/6m (selectable) Set time: 5sec., 30sec., 1min., 3min., 5min., 8min. (Selectable) Twilight Range: 10-2000LUX (adjustable) Loads (Max.): 20W (108 pcs SMD LED) IP 20 Colour Temperature: 4000 K 1400 lumens KLD2 Light fitting with ceiling mount sensor. LED and PIR Technology. Typical Applications: Outdoor lighting (under cover) for front of industrial buildings, gardens, porches, etc. KLD2 0767814 1 Installation height: 1.8-2.5m Detection angle: 180º Detection distance: max. 12m (<24ºC)) Set time: 10 sec. 7 min. (Selectable) Twilight Range: 3-2000LUX (adjustable) Loads (Max.): 25W (12 pcs SMD LED) IP 44 Colour Temperature: 6000 K 1500 lumens 118 International catalogue 2015

4.4 LED lights with sensor KLD3-18 Luminaire detector. Microwave Technology and LED. Typical applications: interior lighting in garages, basements, etc. or dirt or dust and outdoors. KLD3-18 0767815 1 Transmission frequency: CW radar 5.8GHz ISM band Installation height: 2-4m Detection distance: 1-8M (<24 C)) Set time: 10 sec. to 12 min. (Selectable) Twilight Range: 3-2000LUX (adjustable) Loads (Max.): 18W (280 pcs SMD LED) IP 65 Colour Temperature: 6000 K 1350 lumens KLD3-36 Light fitting with sensor. Microwave Technology and LED. Typical applications: interior lighting in garages, basements, etc. or dirt or dust and outdoors. KLD3-36 0767816 1 Transmission frequency: CW radar 5.8GHz ISM band Installation height: 2-4m Detection distance: 1-8M (<24 C)) Set time: 10 sec. to 12 min. (Selectable) Twilight Range: 3-2000LUX (adjustable) Loads (Max.): 36W (602 pcs SMD LED) IP 65 Colour Temperature: 6000 K 2750 lumens KLD4 Light E27 with sensor. PIR and LED technology. Typical Applications: ideal for replacing incandescent lamps for more efficient LED solution, for interiors. 110-130 V 60 Hz KLD4 0767817 1 Power supply: 110-240V (50/60Hz) Installation height: 2-3.5m Detection distance: 6m (<24ºC)) Set time: 120 sec. Twilight Range: <20lux Loads (Max.): 6W (12 pcs LED) IP 20 Colour Temperature: 4000 K 450 lumens International catalogue 2015 119

4.5 Smoke detectors KDH-BAT. Photoelectric smoke detector Photoelectric smoke detector. Battery operated, 9V. Alarm volume: 85dB to 3. Low battery warning. Test button. Easy installation with mounting bracket. Surface mounting. KDH-BAT 0713107 1 Photoelectric smoke detector. 120 International catalogue 2015

International catalogue 2015 121