Date: Customer: Project: Type: Qty: M00 My White Tunable White Order Code: L0 - A2 - - - - - - - - - - TW L0 A2 Series L0 M00 Light Engine A2 68lm/8.6W per foot Average values calculated from a fixture with CLL using LW Shielding and DMX driver. For additional information please see page 2. TW CCT Shielding TW Tunable White - 2700K through 6500K LW LED Optimized white lens Mounting C S RS W F 2 Cable Swivel Stem Rigid Stem Wall Mount Surface Mount 2 Over 8 supplied with 2 or more housings that are joined in the field. Nominal Fixture Length 02 2 ft. 0 ft. 0 ft. 05 5 ft. 06 6 ft. 07 7 ft. 08 8 ft. 09 9 ft. 0 0 ft. ft. 2 2 ft. Individual fixtures and Runs are supplied in nominal lengths to ensure full, even, illumination. See pages 2 through 6 for additional details. XX Runs (over 2 ), round up to the nearest foot and replace the xx with the # (i.e. = nominal) Finish WH White BK Black SV Silver SP Specify Premium Color Custom colors are available, Please consult factory Voltage 20 20 Volt 277 277 Volt UNV 20 thru 277 50/60hz capable Fixture Options DL Damp Location Rated FS In-line Fuse SS Separate Switching WC Wall Controller Connections For DMX, please consult factory. See page 9 for full details and restrictions. For use with wall controller - See page 2 for details. N/A with DMD. Dimming Options DMD 5 eldoled DALI (Logarithmic) DMX 5 eldoled DMX (Linear) 5 See page 7-8 for full details Emergency Options EC 6 Emergency Circuit Wiring 6 See page 9 for full details and restrictions 5YEAR LED WARRANTY ARRA Compliant Page of 0
M00 My White (00mm) /6 (9mm) (00mm) Construction: Housing - Continuous, low copper 606-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to 2 ) or Runs. Geartray - Low copper 606-T6 extruded aluminum profile. Shielding - Extruded, impact resistant acrylic lens, LED optimized white lens (LW). Mounting(s) - /6 Aircraft Cable, Ø5/8 Swivel or Rigid Steel Stem, Wall Bracket, Surface mounting (see pages through 6 for details). ** Cable, Stem and Wall mountings may not be symmetrical for Runs due to the use of modular housing lengths. If symmetrical suspensions are required please consult the factory. Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs are available in approximately increments starting at the nominal 8 fixture length. ** Individual luminaires are not joinable in the field. Exact length luminaires - Individual luminaires and Runs are available in exact lengths to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length luminaires. M00 Joiner(s) - Runs are supplied with multiple housings that are joined together in the field using the supplied M00 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 8 for detail). Electrical/Performance: Constant Lumen Level (CLL) Curve Selux recommends utilizing the Constant Lumen Level (CLL) curve for the My White product. This is achieved using an algorithm programmed into the controls for driving the two channels of the driver simultaneously so that while adjusting the CCT, the lumen output remains the same. For recommended controls for CLL, please consult Selux. Max Output An alternate way to control the output is by having each channel of the driver controlled individually while changing the CCT. Controlling the channels individually can result in a higher lumen level (see chart on Photometry page), though the CCT and output may vary. LED Light Engine Brand-name mid-power LEDs create a high efficiency LED lightlaure engine able to provide a lumen maintenance of 95% at 25,000 hours and 88% at 60,000 hours per TM-2 report (based on CLL) LED Life Calculated L70 greater than 68,000 hours and Reported L70 greater than 60,000 hours @ 25 C per TM-2 (for CLL). Delivered Lumens - Due to LED manufacturer s tolerances the listed output has a ±5% tolerance. CCT - Tunable CCT from 2700K thru 6500K, tolerance within a -step MacAdam ellipse. CRI - Min. 80 Driver - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 7. Wall Controller - Optional wall controller can be ordered for use with DMX fixtures. See DMX controller spec sheet for more details. Thermal Performance: Ambient Operating Temperature - Luminaires suitable for Maximum ambient temperature of 5 C (95 F) Minimum ambient temperature of -20 C (- F). Luminaire Finish: Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI. All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultraviolet resistance for color retention. Standard interior colors are White (WH), Black (BK), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. Warranty: 5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M00 MyWhite LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see Selux Terms and Condition of Sale. Certifications and Compliance: NRTL - For Dry and Damp location (I.E. culus) ARRA Compliant RoHS Compliant Page 2 of 0
M00 My White Cable Mounting (C) Cable Mounting (C) Power Feed Nominal Length A Housing Length Cable Mounting (C) - Dimensions * B (Ref.) End Suspensions C D Feed Location DMX In/Out Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 02 (2 ft.) 2' - /" 66 0' - 2 /8" 5 ' - 8" 508 0' - /8" 29 0' - /8" 29 0 ( ft.) ' - 5/6" 92 0' - /8" 79 2' - 6 /8" 76 0' - 2 /8" 5 0' - 2 /8" 5 0 ( ft.) ' - 7/6" 205 0' - /8" 79 ' - 5 /6" 07 0' - 2 /8" 5 0' - 2 /8" 5. Ø /6 Aircraft Cable with chrome gripper for easy adjustment (8 max. from ceiling to luminaire). 05 (5 ft.) ' - 7/6" 50 0' - /8" 79 ' - 5 /6" 5 0' - 2 /8" 5 0' - 2 /8" 5 06 (6 ft.) 5' - 7/6" 85 0' - /8" 79 5' - 5 /6" 656 0' - 2 /8" 5 0' - 2 /8" 5 07 (7 ft.) 6' - 7/6" 29 0' - /8" 79 6' - 5 /6" 96 0' - 2 /8" 5 0' - 2 /8" 5 08 (8 ft.) 7' - 7/6" 22 0' - /8" 79 7' - 5 /6" 2266 0' - 2 /8" 5 0' - 2 /8" 5 09 (9 ft.) 8' - 7/6" 2729 0' - /8" 79 8' - 5 /6" 2570 0' - 2 /8" 5 0' - 2 /8" 5 0 (0 ft.) 9' - 7/6" 0 0' - /8" 79 9' - 5 /6" 2875 0' - 2 /8" 5 0' - 2 /8" 5 ( ft.) 0' - 7/6" 9 0' - /8" 79 0' - 5 /6" 80 0' - 2 /8" 5 0' - 2 /8" 5 2 (2 ft.) ' - 7/6" 6 0' - /8" 79 ' - 5 /6" 85 0' - 2 /8" 5 0' - 2 /8" 5 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance. L0 Cable (C) Suspension Detail (DMX Feed location(s) only) L0 Cable (C) Suspension Detail (Feed location(s) only) L0 Cable (C) Suspension Detail (Non-Feed location(s) only) r Outlet box for feed only (by others) Cross bar with /-20 rod and ground screw 2x Outlet box screws (by others) / x 5 diameter canopy (white) D Cable Grommet /-20 Slip ring coupler DMX cables (white) /6 Aircraft cable 2x White cable stay Chrome gripper luminaire Cable Grommet Outlet box for feed only (by others) Cross bar with /-20 rod and ground screw 2x Outlet box screws (by others) / x 5 diameter canopy (white) Cord strain relief bushing /-20 Slip ring coupler Feed cord (white) /6 Aircraft cable 2x White cable stay Chrome gripper Luminaire / - 20 Threaded Rod (supplied & installed in the field by others) / x 2 diameter Canopy (white) /-20 Slip ring coupler /6 Aircraft cable Chrome gripper Luminaire Page of 0
M00 My White Stem Mounting (S & RS) Stem Mounting (S & RS) Power Feed. Ø 5/8 Swivel Stem provides 0 swivel and can be cut in field (8 max. from ceiling to luminaire). 2. Ø 5/8 Rigid Stem is fixed and is not able to be cut/adjusted in field (8 max. from ceiling to luminaire). Nominal Length A Housing Length Swivel (S) & Rigid Stem (RS) Mountings - Dimensions * B (Ref.) End Suspensions C D Feed Location DMX In/Out Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 02 (2 ft.) 2' - /" 66 0' - 2 /8" 5 ' - 8" 508 0' - 2 /8" 5 0' - 2 /8" 5 0 ( ft.) ' - 5/6" 92 0' - /8" 79 2' - 6 /8" 76 0' - /8" 79 0' - /8" 79 0 ( ft.) ' - 7/6" 205 0' - /8" 79 ' - 5 /6" 07 0' - /8" 79 0' - /8" 79 05 (5 ft.) ' - 7/6" 50 0' - /8" 79 ' - 5 /6" 5 0' - /8" 79 0' - /8" 79 06 (6 ft.) 5' - 7/6" 85 0' - /8" 79 5' - 5 /6" 656 0' - /8" 79 0' - /8" 79 07 (7 ft.) 6' - 7/6" 29 0' - /8" 79 6' - 5 /6" 96 0' - /8" 79 0' - /8" 79 08 (8 ft.) 7' - 7/6" 22 0' - /8" 79 7' - 5 /6" 2266 0' - /8" 79 0' - /8" 79 09 (9 ft.) 8' - 7/6" 2729 0' - /8" 79 8' - 5 /6" 2570 0' - /8" 79 0' - /8" 79 0 (0 ft.) 9' - 7/6" 0 0' - /8" 79 9' - 5 /6" 2875 0' - /8" 79 0' - /8" 79 ( ft.) 0' - 7/6" 9 0' - /8" 79 0' - 5 /6" 80 0' - /8" 79 0' - /8" 79 2 (2 ft.) ' - 7/6" 6 0' - /8" 79 ' - 5 /6" 85 0' - /8" 79 0' - /8" 79 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance. L0 Swivel Stem (S) Suspension Detail (feed wires through stem supplied by Selux) Outlet box (supplied & installed by others) /8 IP Cross bar with ground screws Pin Hemispherical assembly 7/6 x 5 diameter canopy (white) /8 IP steel stem (white) Dress nut Luminaire Square nut L0 Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by Selux) /8 IP nipple (supplied & installed by others) Outlet box (supplied & installed by others) Square nut Suspension hickey Square nut / x 5 diameter canopy (white) Canopy securing screw /8 IP steel stem (white) Dress nut Luminaire Square nut Page of 0
M00 My White Wall Mounting (W) Power Feed Nominal Length A Housing Length Wall (W) Mount - Dimensions * B (Ref.) End Suspensions C D Feed Location DMX In/Out Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 02 (2 ft.) 2' - /" 66 0' - /8" 79 ' - 6 /6" 58 0' - /8" 79 0' - /8" 79 0 ( ft.) ' - 5/6" 92 0' - 6 /8" 56 2' - /8" 62 0' - 6 /8" 56 0' - 6 /8" 56 0 ( ft.) ' - 7/6" 205 0' - 6 /8" 56 2' - /6" 89 0' - 6 /8" 56 0' - 6 /8" 56 05 (5 ft.) ' - 7/6" 50 0' - 6 /8" 56 ' - /6" 99 0' - 6 /8" 56 0' - 6 /8" 56 06 (6 ft.) 5' - 7/6" 85 0' - 6 /8" 56 ' - /6" 50 0' - 6 /8" 56 0' - 6 /8" 56 07 (7 ft.) 6' - 7/6" 29 0' - 6 /8" 56 5' - /6" 808 0' - 6 /8" 56 0' - 6 /8" 56 08 (8 ft.) 7' - 7/6" 22 0' - 6 /8" 56 6' - /6" 2 0' - 6 /8" 56 0' - 6 /8" 56 09 (9 ft.) 8' - 7/6" 2729 0' - 6 /8" 56 7' - /6" 28 0' - 6 /8" 56 0' - 6 /8" 56 0 (0 ft.) 9' - 7/6" 0 0' - 6 /8" 56 8' - /6" 272 0' - 6 /8" 56 0' - 6 /8" 56 ( ft.) 0' - 7/6" 9 0' - 6 /8" 56 9' - /6" 028 0' - 6 /8" 56 0' - 6 /8" 56 2 (2 ft.) ' - 7/6" 6 0' - 6 /8" 56 0' - /6" 2 0' - 6 /8" 56 0' - 6 /8" 56 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance. Wall Mount (W) (Covers a x or 2x J-Box) (02mm). Aluminum wall bracket (by Selux) 2. x or 2 x J-Box at feed location (supplied and installed by others).. /-20 Threaded rod, /-20 lock washer and /-20 nut required to anchor the wall bracket. Mounting hardware supplied and installed to code by others. (02mm) (25mm) 5 /6 (26mm) Page 5 of 0
M00 My White Surface Mounting (F) - to 8 Surface Mounting (F) - Over 9 to 2 Power Feed Nominal Length A Housing Length * B (Ref.) End Suspensions Feet/Inch MM Feet/ Inch Surface Mount (F) - Dimensions * B End Suspensions C Feet/ Inch C Feet/ Inch C2 MM MM Feet/ Inch D Feed Location DMX In/Out MM Feet/Inch MM 02 (2 ft.) 2' - /" 66 0' - 5/8" N/A ' - 9" 5 N/A N/A 0' - /8" 05 0' - /8" 05 0 ( ft.) ' - 5/6" 92 0' - 6 /8" 56 N/A 2' - /8" 62 N/A N/A 0' - 2 /8" 5 0' - 2 /8" 5 0 ( ft.) ' - 7/6" 205 0' - 6 /8" 56 N/A 2' - /6" 89 N/A N/A 0' - 2 /8" 5 0' - 2 /8" 5 05 (5 ft.) ' - 7/6" 50 0' - 6 /8" 56 N/A ' - /6" 99 N/A N/A 0' - 2 /8" 5 0' - 2 /8" 5 06 (6 ft.) 5' - 7/6" 85 0' - 6 /8" 56 N/A ' 9 ' - /6" 590 N/A 0' - 2 /8" 5 0' - 2 /8" 5 07 (7 ft.) 6' - 7/6" 29 0' - 6 /8" 56 N/A ' 9 2' - /6" 89 N/A 0' - 2 /8" 5 0' - 2 /8" 5 08 (8 ft.) 7' - 7/6" 22 0' - 6 /8" 56 N/A ' 9 ' - /6" 99 N/A 0' - 2 /8" 5 0' - 2 /8" 5 09 (9 ft.) 8' - 7/6" 2729 0' - 6 /8" 56 0' - 6" 5 ' - /6" 99 NA ' 9 0' - 2 /8" 5 0' - 2 /8" 5 0 (0 ft.) 9' - 7/6" 0 0' - 6 /8" 56 0' - 6" 5 ' 9 ' - /6" 590 ' 9 0' - 2 /8" 5 0' - 2 /8" 5 ( ft.) 0' - 7/6" 8 0' - 6 /8" 56 0' - 6" 5 ' 9 2' - /6" 89 ' 9 0' - 2 /8" 5 0' - 2 /8" 5 2 (2 ft.) ' - 7/6" 6 0' - 6 /8" 56 0' - 6" 5 ' 9 ' - /6" 99 ' 9 0' - 2 /8" 5 0' - 2 /8" 5 *Dimension(s) rounded to the nearest /6 with a ± /6 (mm) tolerance. Surface Mount (F). Ø 5/6 Mounting hole drilled at the factory (mounting hardware to code by others). Page 6 of 0
M00 My White eldoled Dimming Driver: eldoled DALI dimming (DMD) Luminaires supplied with DUALdrive DALI dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to %. For dim to dark (down to 0.%), please consult factory. *For control recommendation for eldoled drivers, please contact eldoled. eldo DMX dimming (DMX) Luminaires supplied with POWERdrive DMX dimming driver for linear dimming curve. Minimum dimming level preset at factory to %. For dim to dark (down to 0.%), please consult factory. Selux recommends a maximum of drivers in a DMX universe. DMX fixtures can be grouped together (remove the termination resistor at the end of the fixture and connect the DMX cable from the next fixture). *By default, all drivers on a job will be set to the same address. For additional addressing options, please consult factory. Driver Quantity (consult factory for SS option driver quantity) 2 ft. ft. ft. 5 ft. 6 ft. 7 ft. 8 ft. 9 ft. 0 ft. ft. 2 ft. RUN Standard DMD/DMX driver 2 2 2 2 Approximately 2 drivers per ft. *For inrush and control current, please refer to the driver manufacturers spec sheets. Wiring Diagrams DALI Logarithmic (DMD) DMD Dimming - DMX eldoled POWERdrive (DMX) (Individual fixtures) DMX - Feed Feed (Power) Green White Black Driver DMX in DMX out see DMX connector detail DMX DMX = supplied with a DMX in and DMX out control cables. DMX out control cable is supplied with a removable end of run termination resistor*. *When the DMX system is being commissioned the installer to remove the resistors as needed to group fixtures. DMX connector detail Supplied connector (DMX in) ( position connector, 28-2 ga. 00v 0A) Supplied termination resitor Supplied connector (DMX out) ( position connector, 28-2 ga. 00v 0A) Dimming - DMX eldoled POWERdrive (DMX) (Runs) Connection in field (by others) connectors supplied and wired by Selux DMX - Feed Feed (Power) Green White Black Driver Green White Black Driver DMX in DMX out see DMX connector detail Page 7 of 0
M00 My White LED Recessed Wiring Diagrams DMX dimming (DMX) GREEN BLACK WHITE TERMINATION RESISTOR POWER FEED DMX CABLE DMX FEED CABLE When WHEN DAISY Daisy CHANING Chaining FIXTURES, REMOVE fixtures, remove TERMINATION termination RESISTOR AND CONNECT resistor DMX and OUT CABLE connect DMX out cable. SINGLE SECTION LUMINAIRE LED DRIVER HOUSING, INDIVIDUAL/START GREEN POWER FEED BLACK WHITE DMX CABLE HOUSING, MID 2 HOUSING, END 2 TERMINATION RESISTOR DMX FEED CABLE DMX OUT DMX IN DMX OUT DMX IN DMX OUT DMX IN DMX OUT DMX IN DMX OUT LED DRIVER LED DRIVER LED DRIVER DMX IN MULTI SECTION LUMINAIRE 2 2 DMX FEED CABLE BLACK - DMX NEGATIVE WHITE - DMX POSITIVE BARE - SHIELD BARE WHITE BLACK BLACK WHITE BARE CONNECTORS USED FOR CONTROLLER CONNECTION AND TERMINATION RESISTOR CONNECTION. DO NOT GROUND SHIELD IN LUMINAIRE. ONLY CONNECT SHIELD AT CONTROLLER. POSITION MALE CONNECTOR POSITION FEMALE CONNECTOR BLACK WHITE BARE BARE WHITE BLACK 20 V / W DO NOT USE CONNECTORS USED BETWEEN LUMINAIRE SECTIONS. POSITION FEMALE CONNECTOR WITH TERMINATION CONNECTOR. POSITION MALE CONNECTOR POSITION FEMALE CONNECTOR 2 DMX SIGNAL CONNECTORS Page 8 of 0
M00 My White Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed. (supplied with an 8A slow burn fuse). Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing. Separate Switching (SS) - Luminaires available with separately switched (nominal) sections starting at 7 and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use). - To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order. * If the project requires different separate switching than outlined above please consult the factory. Emergency Circuit (EC) - Luminaires with EC option compliant to UL 92 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use. - For to 6 nominal luminaires, the entire fixture is wired for operation on emergency circuit. - For 7 and up nominal luminaires, the first nominal length is wired for operation by a separate EM circuit by default to meet the required Life Safety Code (NFPA 0). *If a different configuration is needed please consult the factory. Joiner System - standard for Runs Page 9 of 0
M00 Photometry LW Optics / W LED / 000K CCT Link to photometry (IES & PDF files) 99 690 60 20 Catalog #: L0-A2-TW-LW-F-0-WH-20 Report #: 7796-0CLL Delievered Lumens: 2590 Input Watts:.W Efficacy: 76 Power Factor: 0.972 Total Harmonic Distortion: 5.28% CCT: 2700K-6500K CRI: 85.7 Max Candela: 99.6 @ 2.5 from Vertical Spacing Criterion (0-80):.28 Spacing Criterion (90-270):.26 Spacing Criterion (Diagonal):.8 Maximum Candela = 99.6 Located At Horizontal Angle = 0, Vertical Angle = 2.5 # - Vertical Plane Through Horizontal Angles (90-270) # 2 - Vertical Plane Through Horizontal Angles (0-80) This photometry can be used for each CCT when using the CLL output 2 This photometry can be used for all CCTs when utilizing the constant lumen level (CLL) curve for My White. For other outputs, please consult the factory. LUMEN OUTPUT BASED ON CONTROL SETTINGS MAX OUTPUT LEVEL Driver may limit output above this line CONSTANT LUMEN LEVEL 2700K 6500K CCT RECOMMENDED AREA OF OPERATION (CONSTANT LUMEN LEVEL [CLL] SETTINGS) ADDITIONAL Results may LUMEN fluctuate ADJUSTABILITY when USING fixture MAX is OUTPUT used outside CURVE of the Constant Lumen Level curve. My White and the Circadian Rhythm Humans have an internal clock that affects everything from sleep patterns to productivity to health. This clock is called the circadian rhythm. As humans evolved in the days before electric lighting, they had natural exposure to various levels (both color temperature and intensity) from the sun. By adjusting electric lighting to mimic the natural hue and intensity of the sun, it can help restore the body to a natural state. Various studies have shown that this can help with alertness, behavioral issues, and productivity. The Selux proprietary My White technology allows you to adjust both the amount and color of your light, creating a comfortable environment for offices, educational facilities, hospitality, or any other installation where varying light could benefit the occupants. Set up the My White luminaires to a whole building solution, and you could create an automatic adjustment to the light to mimic daylight. Page 0 of 0