COMBINATION SOLUTION FOR COLLECTIVE FLUE, AIR VENTILATION AND EXHAUST SAVING PLACE IN THE SLEEVE SO IT CAN BE DESIGNED SMALLER ONLY ONE ROOF TERMINAL IMPROVING THE AESTHETIC ASPECT TIME- AND COST-EFFECTIVE AS ONLY ONE CHIMNEY HAS TO BE PLACED
Combination solution for collective flue, air ventilation and exhaust The OPSINOX TRIPLE FLOW product range, combines the air flows from both the heating boilers as the ventilation systems in a single chimney. The OPSINOX TRIPLE FLOW consists of 3 concentric ducts in which the air flows from the heating boilers as the ventilation system can be foreseen. The flue gases are discharged through the inner duct and blown out at the top op the roof cap, where as the fresh air for the combustion boiler is supplied via a second inner duct. The outer duct takes care of the removal of contaminated ventilation air, which is blown away laterally in the top element. Easy installation The OPSINOX TRIPLE FLOW is easy to install by the proven system of modular chimney elements with male/female connections. The individual elements are supplied with a clear installation plan so that the chimney can always be assembled correctly. Safe combustion and healthy ventilation The OPSINOX TRIPLE FLOW is designed for the connection of closed heating boilers whose combustion circuit is completely separated from the living areas, what makes the risks associated to poor combustion impossible. Proper ventilation is the base for a healthy indoor environment at your home, so it is important the ventilation system can operate optimally. By connecting the Healtbox from Renson on the OPSINOX TRIPLE FLOW, you lay the foundation of a healthy apartment! Developed in collaboration with the Renson Healthy Apartment Concept As leader in the market in ventilation, Renson is the perfect partner for Opsinox, Belgium s largest producer in flue ducts, to develop this innovation successful. The Renson and Opsinox engineers have developed the patented OPSINOX TRIPLE FLOW system for the purpose of a use- and ease effective installation, which goes hand in hand with a flawless and low maintenance system. Scope The OPSINOX TRIPLE FLOW is the ideal solution for all your projects where multiple units are connected to a central chimney where a decentralized heating and ventilation system is required. This allows each user to enjoy the many benefits offered by its own boiler and its own ventilation system, but still having to provide only one central exhaust duct.
In the top element the various air flows are vented out in a different direction in order to rule out merging of flows Easy connection of the heating boiler and the Renson Healthox
Space saver By already providing the OPSINOX TRIPLE FLOW at the design phase, the technical ducts can be dimensioned up to a 50% smaller. With the ever-rising real estate prices, every square meter useful floor area translate itself directly in increased profitability of the project. An Opsinox representative helps you determine the minimum achieve tube dimensions for your project. Aesthetic Done with tangle on roof outlets. The OPSINOX TRIPLE FLOW needs only one element to eliminate both your combustion gases and ventilation air. Besides the aesthetic advantage, a reduction in the number of roof passages means also a lower heat loss through the roof, as the number of construction nodes are reduced to an absolute minimum. In a sector increasingly seeking for energyefficient homes, it is important to avoid these construction nodes as much as possible! Time and cost saving For the project leader, it is often a challenge to keep track of the many subcontractors and suppliers on site. While traditionally the ventilation system and flue ducts are placed by various parties and placed at different times, the Opsinox Triple Flow can be placed by one team only. Scenarios where after placing the chimney free duct space appears to be too small for ventilation ducts, belong to the past!
Migratory cap OVTOP Adapter TOP Top element Roof passage 10-35 Roof passage 30-45 Storm collar Roof passage for a plat roof Wall support with extension up to 750mm Connection Wall support with extension up to 500mm Duct element long Duct element small BR500 Connection Bottom element on wall support OVBODEM Adapter bottom Condensate tray ventilation duct Duct element small Bottom element on wall support Bottom element