FIESTA No. 2 Slat Profile No. 4 Slat Profile Pitch*: 1.9" steel Pitch*: 2. No. 14 Slat Profile steel Pitch*: 2.45" Model (Face Mounted - Chain Hoist/Motor/Crank) No. 17 Slat Profile ACKET SIZE SIE OOM ACKET SIZE SIE OOM ACKET SIZE 18-1/ SIE OOM ACKET SIZE SIE OOM ACKET SIZE 2 2 24" 23" Up to 10'0" 16 1 Up to 10'0" 18 1 SIE OOM ACKET SIZE Up to 20'0" 16-1/ 7-1 1 9-1 1 18-1/ 7-1 1 9-1 1 FireStar oor Control evices SIE OOM ACKET SIZE ift up and crank operation evolutionary fire door control device utilizing a planetary gear arrangement to disconnect the operator and drop the door in the event of a fire. evolutionary fire door control device utilizing clutch plates and unique counterbalance technology to drop the door in the event of a fire. Up to 24'0" 16-1/ 7-1 1 9-1 1 18-1/ 7-1 1 9-1 1 2 SIE OOM ACKET SIZE SIE OOM SAT 7-1 1 9-1 1 7-1 1 9-1 1 Up to 10'0" 16 1 3" SAT 3" SAT Chain hoist and motor operation Patent pending. HEIGHT SAT Easily drop test and reset a fire door without resetting spring tension and rerouting cables. SIE OOM Model (etween Jambs Mounted-ift up) HEIGHT ACKET SIZE NOTE: Manual lift 2' Slat-up 10' wide or 8' high or 80sqft. Manual lift 3' Slat-up 8' wide or 8' high or 80sqft. Model (etween Jambs Mounted - Under intel Chain Hoist/Motor/Crank) SIE OOM 3" SAT ACKET SIZE SAT 3" SAT Up to 24'0" 16-1/ INNOVATIVE SOUTIONS TO SAFET AN FIE POTECTION HEIGHT SAT Up to 20'0" 16-1/ Pitch*: 1. Model (Face Mounted-ift up) HEIGHT Test evice FireStar doors feature an easy-to-use release handle. FIESTA Slat Profiles 7-1 1 9-1 1 24" 23" 7-1 1 9-1 1 Up to 10'0" 18 1 FO TECHNICA INFOMATION, VISIT WWW.WANE-ATON.COM/COMMECIA Architect esource Center IST IUT E : www.wayne-dalton.com/commercial Go to www.wayne-dalton.com/commercial and click on the Architect esource Center. Here you will quickly find all of the specifications, drawings and documents you need to complete your project. 2014 Wayne alton, a division of Overhead oor Corporation. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. Item 333069 10M 3/14 JA W A N E A T O N C O M M E C I A FireStar O O S hhstana SIZES UP TO 24' WIE AN 24' HIGH THE INUST'S MOST INNOVATIVE FIE OO hhage SIZE OPTIONS AVAIAE Wayne alton FireStar olling Steel Fire oors provide a practical and innovative solution to safety and fire protection. hheas TO TEST FireStar doors can be drop-tested and reset at any time by personnel, such as a facility manager or maintenance supervisor, thanks to a s tandard floor resettable feature. hhnon-tension EEASE The FireStar door features a forward-thinking design that outperforms industry standard fire doors in all areas, including easy testing capability; smooth, quiet operation; and reliable, long-lasting p erformance. hhquiet OPEATION hhfoo ESETTAE hhu/uc/fm ATE hhconfoms TO NFPA STANA 80
FIESTA olling Steel Fire oors Curtain to be correctly balanced by helical springs, oil tempered torsion type. Cast iron barrel plugs will be used to anchor springs to tension shaft and pipe. 20,000 cycle Hood Finish 24 gauge galvanized or stainless steel hood fabricated of sheet metal, flanged at top for attachment to header and flanged at bottom to provide longitudinal stiffness. ust inhibitive primer on non-galvanized surfaces and operating mechanisms. Guides and brackets will be coated with a flat black prime paint Operation Operator Options elease Mechanism Chain Hoist with gear drive reduction, wall crank box, motor operation, motor operation with electrical sensing edge, motor operation with pneumatic sensing edge FireStar release mechanism standard on doors up to 24'x24' Installation Mounting Steel, masonry, fire rated wood, fire rated drywall 16+ gauge steel jambs Applications Factories, warehouses, mills, distribution centers and parking garages *arger size options available up to 36'w x 28'h with mechanical release Options Chain Hoist w/ gear drive reduction FM label option to include hood with steel baffle 2 FireStar s revolutionary design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance. The drop-out mechanism is designed to eliminate down time during drop testing while the viscous governor technology results in smoother, quieter door operation. Factory tested and approved for a minimum of 20,000 cycles, the FireStar door can be used and tested on a regular basis without concerns of premature failure. FONT EEVATION **oors up to 24'x24' SIE EEVATION FONT EEVATION SIE EEVATION (UNE INTE) SIE EEVATION SIE EEVATION (UNE INTE) SIE EEVATION SIE EEVATION (UNE INTE) SIE EEVATION MOTO OPEATION OPENING A ACKET SIEOOM ACKET SIEOOM POWE WHEE INTE POWE EMEGENC HOIST EFT GUIE SIEOOM IGHT GUIE SIEOOM FireStar fire doors have been tested and approved to meet the requirements of well known agencies, such as Underwriters aboratories of Canada and Factory Mutual, and conform to NFPA Standard 80. Wayne alton incorporates one standardized component design for all FireStar** doors regardless of size, and utilizes fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of p otential service calls in the future. SIE EEVATION (UNE INTE) FONT EEVATION IFT UP OPEATION - OTTOM MOUNT POWE WHEE INTE SIE EEVATION (UNE INTE) ANGE GUIES - FACE MOUNTE TO MASON SIE EEVATION FONT EEVATION IFT UP OPEATION - FONT MOUNT ANGE GUIES - MOUNTE ETWEEN JAMS OPENING "A" JAM JAM 1/4"+G OPENING "A" 1/4"+G ANGE GUIES - FACE MOUNTE TO STEE Wind load options available Awning crank Motor operation Motor operation w/electrical sensing edge The FireStar door can be drop tested easily and reset in a matter of seconds at any time; no tools or service t echnicians are required. Counter alance Enclose ends of coil and provide support for counterbalance pipe at each end. Fabricate of steel plates with permanently sealed ball bearings. INTE rackets Two equal angles, 0.1 min thickness, to stiffen curtain ottom ar INTE Interlocking roll-formed slats with alternate slats fitted with metal endlocks/windlocks WHEE Curtain Galvanized or Stainless Steel WHEE OPENING HEIGHT "F" Material Critical elements necessary in the reliable f unction of fire doors are incorporated as standard f eatures with FireStar s revolutionary design. IGHT SIEOOM OPENING A Standard Max Width* EFT SIEOOM CANK OPEATION Standard Max Height* CHAIN HOIST OPEATION Construction FireStar olling Steel Fire doors are a simple and innovative solution for your safety and fire protection needs. Standard Features Overview 1/4"+G OPENING "A" 1/4"+G Series oor G CEA OPENING G WHEE G INTE 2-7/ TO 13' TO 20'0" 2-13/1 3-1/4" TO 24'0" NOTE: imensions are for general reference only and not for construction purposes. Motor operation w/ pneumatic sensing edge Viscous governor, if required by size of door COMMON GUIE MOUNTING OPTIONS FONT EEVATION
FIESTA olling Steel Fire oors Curtain to be correctly balanced by helical springs, oil tempered torsion type. Cast iron barrel plugs will be used to anchor springs to tension shaft and pipe. 20,000 cycle Hood Finish 24 gauge galvanized or stainless steel hood fabricated of sheet metal, flanged at top for attachment to header and flanged at bottom to provide longitudinal stiffness. ust inhibitive primer on non-galvanized surfaces and operating mechanisms. Guides and brackets will be coated with a flat black prime paint Operation Operator Options elease Mechanism Chain Hoist with gear drive reduction, wall crank box, motor operation, motor operation with electrical sensing edge, motor operation with pneumatic sensing edge FireStar release mechanism standard on doors up to 24'x24' Installation Mounting Steel, masonry, fire rated wood, fire rated drywall 16+ gauge steel jambs Applications Factories, warehouses, mills, distribution centers and parking garages *arger size options available up to 36'w x 28'h with mechanical release Options Chain Hoist w/ gear drive reduction FM label option to include hood with steel baffle 2 FireStar s revolutionary design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance. The drop-out mechanism is designed to eliminate down time during drop testing while the viscous governor technology results in smoother, quieter door operation. Factory tested and approved for a minimum of 20,000 cycles, the FireStar door can be used and tested on a regular basis without concerns of premature failure. FONT EEVATION **oors up to 24'x24' SIE EEVATION FONT EEVATION SIE EEVATION (UNE INTE) SIE EEVATION SIE EEVATION (UNE INTE) SIE EEVATION SIE EEVATION (UNE INTE) SIE EEVATION MOTO OPEATION OPENING A ACKET SIEOOM ACKET SIEOOM POWE WHEE INTE POWE EMEGENC HOIST EFT GUIE SIEOOM IGHT GUIE SIEOOM FireStar fire doors have been tested and approved to meet the requirements of well known agencies, such as Underwriters aboratories of Canada and Factory Mutual, and conform to NFPA Standard 80. Wayne alton incorporates one standardized component design for all FireStar** doors regardless of size, and utilizes fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of p otential service calls in the future. SIE EEVATION (UNE INTE) FONT EEVATION IFT UP OPEATION - OTTOM MOUNT POWE WHEE INTE SIE EEVATION (UNE INTE) ANGE GUIES - FACE MOUNTE TO MASON SIE EEVATION FONT EEVATION IFT UP OPEATION - FONT MOUNT ANGE GUIES - MOUNTE ETWEEN JAMS OPENING "A" JAM JAM 1/4"+G OPENING "A" 1/4"+G ANGE GUIES - FACE MOUNTE TO STEE Wind load options available Awning crank Motor operation Motor operation w/electrical sensing edge The FireStar door can be drop tested easily and reset in a matter of seconds at any time; no tools or service t echnicians are required. Counter alance Enclose ends of coil and provide support for counterbalance pipe at each end. Fabricate of steel plates with permanently sealed ball bearings. INTE rackets Two equal angles, 0.1 min thickness, to stiffen curtain ottom ar INTE Interlocking roll-formed slats with alternate slats fitted with metal endlocks/windlocks WHEE Curtain Galvanized or Stainless Steel WHEE OPENING HEIGHT "F" Material Critical elements necessary in the reliable f unction of fire doors are incorporated as standard f eatures with FireStar s revolutionary design. IGHT SIEOOM OPENING A Standard Max Width* EFT SIEOOM CANK OPEATION Standard Max Height* CHAIN HOIST OPEATION Construction FireStar olling Steel Fire doors are a simple and innovative solution for your safety and fire protection needs. Standard Features Overview 1/4"+G OPENING "A" 1/4"+G Series oor G CEA OPENING G WHEE G INTE 2-7/ TO 13' TO 20'0" 2-13/1 3-1/4" TO 24'0" NOTE: imensions are for general reference only and not for construction purposes. Motor operation w/ pneumatic sensing edge Viscous governor, if required by size of door COMMON GUIE MOUNTING OPTIONS FONT EEVATION
FIESTA olling Steel Fire oors Curtain to be correctly balanced by helical springs, oil tempered torsion type. Cast iron barrel plugs will be used to anchor springs to tension shaft and pipe. 20,000 cycle Hood Finish 24 gauge galvanized or stainless steel hood fabricated of sheet metal, flanged at top for attachment to header and flanged at bottom to provide longitudinal stiffness. ust inhibitive primer on non-galvanized surfaces and operating mechanisms. Guides and brackets will be coated with a flat black prime paint Operation Operator Options elease Mechanism Chain Hoist with gear drive reduction, wall crank box, motor operation, motor operation with electrical sensing edge, motor operation with pneumatic sensing edge FireStar release mechanism standard on doors up to 24'x24' Installation Mounting Steel, masonry, fire rated wood, fire rated drywall 16+ gauge steel jambs Applications Factories, warehouses, mills, distribution centers and parking garages *arger size options available up to 36'w x 28'h with mechanical release Options Chain Hoist w/ gear drive reduction FM label option to include hood with steel baffle 2 FireStar s revolutionary design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance. The drop-out mechanism is designed to eliminate down time during drop testing while the viscous governor technology results in smoother, quieter door operation. Factory tested and approved for a minimum of 20,000 cycles, the FireStar door can be used and tested on a regular basis without concerns of premature failure. FONT EEVATION **oors up to 24'x24' SIE EEVATION FONT EEVATION SIE EEVATION (UNE INTE) SIE EEVATION SIE EEVATION (UNE INTE) SIE EEVATION SIE EEVATION (UNE INTE) SIE EEVATION MOTO OPEATION OPENING A ACKET SIEOOM ACKET SIEOOM POWE WHEE INTE POWE EMEGENC HOIST EFT GUIE SIEOOM IGHT GUIE SIEOOM FireStar fire doors have been tested and approved to meet the requirements of well known agencies, such as Underwriters aboratories of Canada and Factory Mutual, and conform to NFPA Standard 80. Wayne alton incorporates one standardized component design for all FireStar** doors regardless of size, and utilizes fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of p otential service calls in the future. SIE EEVATION (UNE INTE) FONT EEVATION IFT UP OPEATION - OTTOM MOUNT POWE WHEE INTE SIE EEVATION (UNE INTE) ANGE GUIES - FACE MOUNTE TO MASON SIE EEVATION FONT EEVATION IFT UP OPEATION - FONT MOUNT ANGE GUIES - MOUNTE ETWEEN JAMS OPENING "A" JAM JAM 1/4"+G OPENING "A" 1/4"+G ANGE GUIES - FACE MOUNTE TO STEE Wind load options available Awning crank Motor operation Motor operation w/electrical sensing edge The FireStar door can be drop tested easily and reset in a matter of seconds at any time; no tools or service t echnicians are required. Counter alance Enclose ends of coil and provide support for counterbalance pipe at each end. Fabricate of steel plates with permanently sealed ball bearings. INTE rackets Two equal angles, 0.1 min thickness, to stiffen curtain ottom ar INTE Interlocking roll-formed slats with alternate slats fitted with metal endlocks/windlocks WHEE Curtain Galvanized or Stainless Steel WHEE OPENING HEIGHT "F" Material Critical elements necessary in the reliable f unction of fire doors are incorporated as standard f eatures with FireStar s revolutionary design. IGHT SIEOOM OPENING A Standard Max Width* EFT SIEOOM CANK OPEATION Standard Max Height* CHAIN HOIST OPEATION Construction FireStar olling Steel Fire doors are a simple and innovative solution for your safety and fire protection needs. Standard Features Overview 1/4"+G OPENING "A" 1/4"+G Series oor G CEA OPENING G WHEE G INTE 2-7/ TO 13' TO 20'0" 2-13/1 3-1/4" TO 24'0" NOTE: imensions are for general reference only and not for construction purposes. Motor operation w/ pneumatic sensing edge Viscous governor, if required by size of door COMMON GUIE MOUNTING OPTIONS FONT EEVATION
FIESTA No. 2 Slat Profile No. 4 Slat Profile Pitch*: 1.9" steel Pitch*: 2. No. 14 Slat Profile steel Pitch*: 2.45" Model (Face Mounted - Chain Hoist/Motor/Crank) No. 17 Slat Profile ACKET SIZE SIE OOM ACKET SIZE SIE OOM ACKET SIZE 18-1/ SIE OOM ACKET SIZE SIE OOM ACKET SIZE 2 2 24" 23" Up to 10'0" 16 1 Up to 10'0" 18 1 SIE OOM ACKET SIZE Up to 20'0" 16-1/ 7-1 1 9-1 1 18-1/ 7-1 1 9-1 1 FireStar oor Control evices SIE OOM ACKET SIZE ift up and crank operation evolutionary fire door control device utilizing a planetary gear arrangement to disconnect the operator and drop the door in the event of a fire. evolutionary fire door control device utilizing clutch plates and unique counterbalance technology to drop the door in the event of a fire. Up to 24'0" 16-1/ 7-1 1 9-1 1 18-1/ 7-1 1 9-1 1 2 SIE OOM ACKET SIZE SIE OOM SAT 7-1 1 9-1 1 7-1 1 9-1 1 Up to 10'0" 16 1 3" SAT 3" SAT Chain hoist and motor operation Patent pending. HEIGHT SAT Easily drop test and reset a fire door without resetting spring tension and rerouting cables. SIE OOM Model (etween Jambs Mounted-ift up) HEIGHT ACKET SIZE NOTE: Manual lift 2' Slat-up 10' wide or 8' high or 80sqft. Manual lift 3' Slat-up 8' wide or 8' high or 80sqft. Model (etween Jambs Mounted - Under intel Chain Hoist/Motor/Crank) SIE OOM 3" SAT ACKET SIZE SAT 3" SAT Up to 24'0" 16-1/ INNOVATIVE SOUTIONS TO SAFET AN FIE POTECTION HEIGHT SAT Up to 20'0" 16-1/ Pitch*: 1. Model (Face Mounted-ift up) HEIGHT Test evice FireStar doors feature an easy-to-use release handle. FIESTA Slat Profiles 7-1 1 9-1 1 24" 23" 7-1 1 9-1 1 Up to 10'0" 18 1 FO TECHNICA INFOMATION, VISIT WWW.WANE-ATON.COM/COMMECIA Architect esource Center IST IUT E : www.wayne-dalton.com/commercial Go to www.wayne-dalton.com/commercial and click on the Architect esource Center. Here you will quickly find all of the specifications, drawings and documents you need to complete your project. 2014 Wayne alton, a division of Overhead oor Corporation. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. Item 333069 10M 3/14 JA W A N E A T O N C O M M E C I A FireStar O O S hhstana SIZES UP TO 24' WIE AN 24' HIGH THE INUST'S MOST INNOVATIVE FIE OO hhage SIZE OPTIONS AVAIAE Wayne alton FireStar olling Steel Fire oors provide a practical and innovative solution to safety and fire protection. hheas TO TEST FireStar doors can be drop-tested and reset at any time by personnel, such as a facility manager or maintenance supervisor, thanks to a s tandard floor resettable feature. hhnon-tension EEASE The FireStar door features a forward-thinking design that outperforms industry standard fire doors in all areas, including easy testing capability; smooth, quiet operation; and reliable, long-lasting p erformance. hhquiet OPEATION hhfoo ESETTAE hhu/uc/fm ATE hhconfoms TO NFPA STANA 80
FIESTA No. 2 Slat Profile No. 4 Slat Profile Pitch*: 1.9" steel Pitch*: 2. No. 14 Slat Profile steel Pitch*: 2.45" Model (Face Mounted - Chain Hoist/Motor/Crank) No. 17 Slat Profile ACKET SIZE SIE OOM ACKET SIZE SIE OOM ACKET SIZE 18-1/ SIE OOM ACKET SIZE SIE OOM ACKET SIZE 2 2 24" 23" Up to 10'0" 16 1 Up to 10'0" 18 1 SIE OOM ACKET SIZE Up to 20'0" 16-1/ 7-1 1 9-1 1 18-1/ 7-1 1 9-1 1 FireStar oor Control evices SIE OOM ACKET SIZE ift up and crank operation evolutionary fire door control device utilizing a planetary gear arrangement to disconnect the operator and drop the door in the event of a fire. evolutionary fire door control device utilizing clutch plates and unique counterbalance technology to drop the door in the event of a fire. Up to 24'0" 16-1/ 7-1 1 9-1 1 18-1/ 7-1 1 9-1 1 2 SIE OOM ACKET SIZE SIE OOM SAT 7-1 1 9-1 1 7-1 1 9-1 1 Up to 10'0" 16 1 3" SAT 3" SAT Chain hoist and motor operation Patent pending. HEIGHT SAT Easily drop test and reset a fire door without resetting spring tension and rerouting cables. SIE OOM Model (etween Jambs Mounted-ift up) HEIGHT ACKET SIZE NOTE: Manual lift 2' Slat-up 10' wide or 8' high or 80sqft. Manual lift 3' Slat-up 8' wide or 8' high or 80sqft. Model (etween Jambs Mounted - Under intel Chain Hoist/Motor/Crank) SIE OOM 3" SAT ACKET SIZE SAT 3" SAT Up to 24'0" 16-1/ INNOVATIVE SOUTIONS TO SAFET AN FIE POTECTION HEIGHT SAT Up to 20'0" 16-1/ Pitch*: 1. Model (Face Mounted-ift up) HEIGHT Test evice FireStar doors feature an easy-to-use release handle. FIESTA Slat Profiles 7-1 1 9-1 1 24" 23" 7-1 1 9-1 1 Up to 10'0" 18 1 FO TECHNICA INFOMATION, VISIT WWW.WANE-ATON.COM/COMMECIA Architect esource Center IST IUT E : www.wayne-dalton.com/commercial Go to www.wayne-dalton.com/commercial and click on the Architect esource Center. Here you will quickly find all of the specifications, drawings and documents you need to complete your project. 2014 Wayne alton, a division of Overhead oor Corporation. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. Item 333069 10M 3/14 JA W A N E A T O N C O M M E C I A FireStar O O S hhstana SIZES UP TO 24' WIE AN 24' HIGH THE INUST'S MOST INNOVATIVE FIE OO hhage SIZE OPTIONS AVAIAE Wayne alton FireStar olling Steel Fire oors provide a practical and innovative solution to safety and fire protection. hheas TO TEST FireStar doors can be drop-tested and reset at any time by personnel, such as a facility manager or maintenance supervisor, thanks to a s tandard floor resettable feature. hhnon-tension EEASE The FireStar door features a forward-thinking design that outperforms industry standard fire doors in all areas, including easy testing capability; smooth, quiet operation; and reliable, long-lasting p erformance. hhquiet OPEATION hhfoo ESETTAE hhu/uc/fm ATE hhconfoms TO NFPA STANA 80