SECURITY PORTALS and DOORS

SECURITY PORTALS and DOORS COMETA SPA

SECURITY PORTALS with interlocking door system

SECURITY PORTALS (interlocking door system) Classic Portals, square base Co132 Co135 Main features Monoblock (High Security Level) Self-managed High Security Portal with weighing cell system: - Single passage checking system (Antihostage system) - Abandoned object detection (weight higher than 200 grams) Possibility of embedding in floor up to 65mm Doors and side walls: Bulletproof laminated glass 26/27mm BR3/S EN1063 and antiburglary P6B EN356 Corner construction is available only for Co135 model Paint finish: embossed, according to RAL color scale, or Stainless Steel covering Traffic Light Panels & Multilingual synthvoice for transit communications Professional Console for Portal functions management Co135C Armored versions: with armored steel door Optionals Co132 Emergency exit management Camera Card reader IR sensor for people presence monitoring Biometric registration system: Biobank Anti masking System: Face Detection CEIA Metal Detector Co135C0 Armored door + bulletproof side glass Co135C3 Armored door + «blind» sides Co135.R60 (R= ribassata / lowered) Professional Console for Portal functions management. Model Co132.60 Co135.60 Overall Dimensions W x D x H (mm) Width of Passage (mm) Floor Thickness (mm) Weight (Kg) 995 x 995 x 2400 600 65 800 1050 x 1050 x 2400 600 65 800 Certified Glasses Bulletproof BR3/S EN1063 Co135.60 with ramp Co135.R60 1050 x 1050 x 2340 600 30 800 Co135.C 1050 x 1050 x 2400 600 65 900 Anti-burglary P6B EN356 *These models can be made of stainless steel.

SECURITY PORTALS (interlocking door system) 600 Cylinder Portals, round base Co136 Co137 Co138 Main features 40/10 steel pressure bent sheet Co136 and Co137 monoblock, Co138 removable structure Self-managed Security Portal with weighing floor system (abandoned object detection, weight higher than 200 grams) Single passage checking system (anti-hostage system) Doors and side walls: - Laminated glass 20/21 mm EN1063-BR2/S (Co138) EN356-P6B - Laminated glass 23/24 mm EN1063-BR2/S (Co137) EN356-P6B - Laminated glass 26/27 mm EN1063-BR3/S (Co136) EN356-P6B Paint finish: embossed, according to RAL color scale, is possible also the Stainless Steel covering Traffic Light Panels & Multilingual synth-voice for transit communications Professional Console for Portal s functions management and monitoring Ø1050 600 / 700 Ø1050 / Ø1150 Co136.60 Co137.60 Co137.70 Optionals 900 Emergency exit management Camera Card reader IR sensor for people presence monitoring Biometric registration system: Biobank Anti masking System: Face Detection CEIA metal detectors: - Metal detector CEIA 02PN8HIPE/CF - Metal detector CEIA 02PN8HIPE Ø1500 Co138.S90 Model Overall Dimensions Ø x H (mm) Width of Passage (mm) Floor Thickness (mm) Weight (Kg) Professional Console for Portal functions management. Co136.60 Co137.60 Co137.70 Co138.S90 1050 x 2400 600 65 800 1050 x 2350 600 20 900 1150 x 2350 700 20 900 1500 x 2400 900 25 1300 *These models can be made of stainless steel

SECURITY PORTALS (interlocking doors system) Panorama Portal, ellipse base Co139 Main features Monoblock: 40/10 Steel pressure bent sheet Self-managed Security Portal with weighing floor system (abandoned object detection, weight higher than 200 grams) Single passage checking system (anti-hostage system) Doors and side walls: Laminated glass 20/21mm EN1063-BR2/S - EN356-P6B Paint finish: embossed, according to RAL color scale Traffic Light Panels & Multilingual synth-voice for transit communications Professional Console for Portal s functions management and monitoring Optionals Emergency exit management Camera Card reader IR sensor for people presence monitoring. Biometric registration system: BIOBANK Anti masking System: FACE DETECTION CEIA Metal Detector: 02PN8HIPE large Secondary door for service access Professional Console for Portal functions management. 900 mm (A) 900 mm (A) D 1900 mm 550 mm (B) W 1500 mm W 1500 mm Model Overall Dimensions W x D x H (mm) Width of Passage (mm) Width of Passage (mm) Floor Thickness (mm) Weight (Kg) Co139 1500 x 1900 x 2400 900 (A) 550 (B) 25 1500

SECURITY PORTALS (interlocking doors system) Half moon Portal Co140 Main features Monoblock: 30/10 Steel pressure bent sheet Suitable for disabled person transit Weighing floor system, for: - Presence person detection - More than one person detection (anti-hostage) - Abandoned object detection (weight higher than 200 grams) Doors and side walls: Laminated glass 18/19mm bulletproof BR1/S EN1063 - anti-burglary P5B EN356 Paint finish: embossed, according to RAL color scale, is possible also the Stainless Steel covering Internal Emergency button with alarm functions Traffic Light Panels & Multilingual synth-voice for transit communications Professional Console for Portal s functions management and monitoring Professional Console for Portal functions management. Optionals Emergency exit management Camera Card reader IR sensor for people presence monitoring. Biometric registration system: BIOBANK Anti masking System: FACE DETECTION CEIA metal detector - Metal detector CEIA 02PN8HIPE/CF Large - Metal detector CEIA 02PN8HIPE - Metal detector CEIA 02PN7 D 1920 mm W 1250 mm 900 mm (A) 960 mm (B) Model Overall Dimensions W x D x H (mm) Width of Passage (mm) Width of Passage (mm) Floor Thickness (mm) Weight (Kg) Co140 1250 x 1920 x 2400 900 (A) 960 (B) 25 1100

SECURITY PORTALS (interlocking doors system) Crystal Portal, glass-body Co143 Professional Console for Portal functions management. Main features Removable structure (installed on the existing floor) Glass structure Glasses: laminated, bulletproof BR1/S EN1063 Side glasses: anti-burglary 18/19mm PB5 EN356 Door glasses: anti-burglary 12/13mm P4B EN356 Paint finish: according to RAL color scale Single passage checking system (anti-hostage system) Infrared sensors for person detection Infrared sensors for door opening request Internal Emergency button with alarm functions Traffic Light Panels & Multilingual synth-voice for transit communications Professional Console for Portal s functions management and monitoring Optionals Emergency exit management Camera Card s reader IR sensor for people presence monitoring Biometric registration system: BIOBANK Anti masking System: FACE DETECTION Model Dimensions (mm) Width of Passage (mm) Weight (Kg) Glasses Co143 Ø1156 x H2400 660 450 Bulletproof BR1/S EN1063 Side glasses: Anti-burglary.18/19mm P5B EN356 Door glasses: Anti-burglary 12/13mm P4B EN3456

SECURITY PORTALS - MANUAL INTERLOCKING DOORS Manual doors Portal Coi122.70 / Coi122.90 Main features Monoblock: 40/10 Steel pressure bent sheet Internal door and side walls: Laminated glass 23/24mm bulletproof BR2/S EN1063 - anti-burglary P6B EN356 Paint finish: embossed, according to RAL color scale Possibility of embedding in floor up to 35mm Traffic Light Panels & Multilingual synth-voice for transit communications High Security Locks with Anti-burglary Top Grade (level 7) certification according to EN12209 Internal Emergency button with alarm functions Traffic Light Panels & Multilingual synth-voice for transit communications Professional Console for Portal s functions management and monitoring Certifications Anti-burglary protection Bullet proof protection Glass - External door P6B UNI EN356 BR2/S EN1063 Glass - Internal door and lateral sides P6B UNI EN356 BR3/S EN1063 Locks Class 7 UNI EN12209 Cylinder Class 6 UNI EN1303 Optionals Emergency exit management Card reader Camera Biometric registration system: BIOBANK Anti masking System: FACE DETECTION CEIA metal detectors: - Metal detector CEIA 02PN8HIPE/CF - Metal detector CEIA 02PN8HIPE - Metal detector CEIA 02PN7 Anti-burglary Grade 7 Locks certified according to EN12029 Electric Lock single action, closed when not powered. Supplied with temporary unlocking control with an excludible key (or handle). Professional Lock with self-locking bolt system (patented). Corrosion resistant stainless steel case The spring latch allows the correct alignment for a safe closing (cylinder output even in the absence of power supply) Stainless steel Bolt Coi122.701 Co122.901 Cylinder backset Stainless steel Face Plate Built-in door position sensor and bolt status Coi122.703 Coi122.903 Easy installation - No maintenance Coi122.704 Coi122.904

FUNCTIONS AND OPERATION INTERLOCKING SECURITY PORTALS Mode of Operation The doors are always locked shut when are in the rest position. An authorized signal let the booth opens the first door, allowing the user to step into the booth (where a presence is detected by checking weight increase on the floor, side panels and doors). The first door closes and the second door opens, thus allowing the user to pass through. When the unit is vacated, the system closes the second door automatically, resetting the cycle. Prevention fo Multi Person Entry Electronic weight sensing determines if more than one person is present within the booth. The booth is set with a predetermined, but adjustable anti hostage threshold (upper and lower limit). As an authorized user stands in the booth, it confirms acceptance of the occupant and authorises the door to close. Should the misured weight not be authorized, i.e. more than one person present or over weight non-permitted additional baggage, a vocal synthesiser will ask the occupants to leave the booth. Once the occupants have vacated the booth, the door will close and the system will automatically reset. Standard upper and lower weight limit range from 1 to 140 Kg. For heavy requirements a maximum setting of 160Kg. Is also available. Passage Confirmation Depending on the access control functions (installed in the cabin), the system will open the second (exit) door when an a valid passage is confirmed. Otherwise, when the user s passage is rejected, the system will lock the second (exit) door and will open again the first (entrance) door, just to let the user get out.

SECURITY AIRLOCK SYSTEM WITH CERTIFIED METAL DETECTOR HIPE CF Security Airlock System CoMETA production includes security airlock system designed to integrate the Metal Detector CEIA HIPE CF, which allows a high discrimination between metal personal objects and firearms. This feature drastically reduces the improper alarms, limiting the operator s intervention and making the passages more fluid. COMPARISON BETWEEN VALID ACCESSES AND FALSE ALARMS The graph compares two systems installed in the same context, where a sample of 100 people passed through in each of the two systems. Main features Digitally adjustable sensitivity with a wide range of values International Standards: Direct selection of the International Security Standards Very high discrimination Very high immunity to electromagnetic and mechanical interference All functions programmable and controlled by a microprocessor Programming: via built-in keypad and RDU or RS232/RS485 serial connection to PC or computer network Programming access protected by both a mechanical lock and by two software level passwords. Automatic synchronization between two or more metal detectors, at a distance of up to 5 cm, from each other, without using cables Professional high integration and high reliability electronics Electronic control unit separated from the archway No need for initial or periodic calibration Easy maintenance. The electronic control unit can be replaced in less than one minute Color: light gray RAL 7040

MULTIPLE SYSTEMS CENTRALIZATION CoJ953 Main features New developments in Physical Security for locations, assets and people. The evolution in this field has led to enhance systems centralization and development of remote control devices; as a result, the request for new features, as remote monitoring, system integration and interactive monitoring is increasing. A lot of products need additional devices in order to comply to the new centralization requests; in this way, network security infrastructures become more complex, by adding modules for every single existing device, in order to support remote management and monitoring features. CoMETA S.p.A. presents a new solution, introducing a single module able to gather warnings and to register events from each device within the whole Security System (Cabin, Emergency Door, Vaults, Biometrics, Alarm System, etc.). Monitoring & Management System based on CoJ953 Centralizer Device is able to achieve quality and efficiency purposes in the field of physical security, by using one single device. CoJ953 CoJ953 architecture, in line with the main requirements of security centralization permits, through the LAN interface, the connection to the alarm systems, by using TCP/IP protocol. Furthermore the CoJ953 has an integrated Web Server for the monitoring and the remote maintenance of connected devices, in order to limit the cost of human interventions. Moreover, the CoP953.J software (CoJ953 Centralization Setup, installed on the Service PC), is conceived to give the access to CoMETA s centralization systems, both by RS485 interface on devices bus, and by TCP, in order to carry out the following operations: system configuration, events visualization, events exportation.

SECURITY REVOLVING DOORS

REVOLVING DOORS Co146.180.N Particularly suitable for stylish sites, CoMETA Co146.NA Security Revolving Doors Series a smart solution for entrances of: congress centers, airports, industries, companies, museums, hotels, datacenters and shopping centers. Co146.NA Revolving Doors are also perfect as access control system with the integration of badge readers and biometric devices (fingerprint acquisition). Co146.N: main features No base (directly installed on the floor) Single passage checking system on each turnstile sector: Tailgating and Piggybacking detection system Internal glass: BR1/S 13/14mm (optional BR3/S) External glass: BR2/S 20/21mm (optional BR4/S) Portal Console with digital display and menu-guided commands Intercom, voice messages and traffic-lights Easy-link to third party manufactured access control systems (RS232 - RS485 - IBIS interfaces) Proxy and swipe-card and biometric readers easily added Automatic unlock system in case of emergency Mechanical Lock for additional locking during night-times Armored defender for key cylinder protection, anti-drill (optional) Rain cover: honeycomb PVC cover cap panel, UV resistant Reinforced upper cover: steel panel for cap protection (optional) Model Co146.160.N Co146.180.N Co146.230.N Overall Dimensions Ø x H (mm) 1600mm x 2325mm 1800mm x 2325mm 2300mm x 2325mm Tailgating detection system Passage Width L x H (mm) 660mm x 2090mm 750mm x 2090mm 1400mm x 2090mm Details 3 wings turnstile (on request) 3 or 4 wings turnstile 4 wings turnstile (on request) Piggybacking detection system Co146.NB Model with reinforced steel structure, a special version mounted with FB4 grade bulletproof resistance steel according to UNI EN 1522. Co146.180.N (without doors and no base) Co146.160.N Co146.180.N Co146.230.N

REVOLVING DOORS Co147.D (with Metal Detector) Co147.S (with Metal Detector) CoMETA Co147.D &.S Security Revolving Doors are a multi-sectors revolving-type entrance control systems with built-in Metal Detector for patrolled areas. Additional sliding doors at the protected area dramatically improved passage flow maintaining a high security level (with 3 or 4 wings turnstiles, custom models available). Special versions: Co147.DB and Co147.SB with reinforced steel structure, mounted with FB4 grade bulletproof resistance steel according to UNI EN 1522. Co147.D: main features 2-leaves door on protected side Co147.S: main features 1-leaf door on protected side No base (directly installed on the floor) Single person passage checking system on each turnstile sector: Tailgating and Piggybacking detection system Built-in Metal Detector (also available without Metal Detector) Internal glass: BR1/S 13/14mm (optional BR3/S) External glass: BR2/S 20/21mm (optional BR4/S) Portal Console with digital display and menu-guided commands Intercom, voice messages and traffic-lights Easy-link to third party manufactured access control systems (RS232 - RS485 - IBIS interfaces) Proxy and swipe-card and biometric readers easily added Automatic unlock system in case of emergency Double sliding door (automatic closing system if metal detector alarmed or two persons try to get in the same sector) Mechanical Lock for additional locking during night-times Armored defender for key cylinder protection, anti-drill (optional) Rain cover: honeycomb PVC cover cap panel, UV resistant Reinforced upper cover: steel panel for cap protection (optional) Tailgating detection system Piggybacking detection system Model Overall Dimensions Ø x H (mm) Passage Width L x H (mm) Details Co147.180.D (2-leaves door on protectedside) Co147.180.S (1-leaf door on protected side) Co147.180.DA 1800mm x 2375mm 750mm x 2090mm 3 or 4 wings turnstile with 2 sliding doors on protected side Co147.180.SA 1800mm x 2375mm 750mm x 2090mm 3 or 4 wings turnstile with 1 sliding door on highside

SECURITY DOORS

ARMORED DOOR Co155 CoMETA Co155 Armored door with RC4 grade anti-burglary certification a iron&steel solution for security entrances. Armored with 25 x 25mm internal structural tubulars (2mm thick) and external steel layers (3mm thick) with a 12 locking-points professional Lock. RC4 ANTI-BURGLARY CERTIFICATION Doorknob Mechanical Lock Mechanical Lock Cylinder Electric Lock Co404 Electric Lock Cylinder Closing-door Spring 12 locking-points Professional Lock 11 locking-points Lock + 1 Electric lock Co155: main features Door dimensions (up to): W 970 x D 63 x H2113mm Counterframe dimensions: W 1090 x H 2180 mm Passage: W 900 x H 2100 mm Profiles: 20/10 galvanized steel Embossed finish: RAL colors Inwards or outwards opening, with hidden hinges and flexible couplings, right or left opening-hand (on request); Removable access panel (internal side) for door s inspection and maintenance; 11 locking-points Professional Lock (grade 7 antiburglary according to EN12209) of which 9 in the main body: 5 central points, 2 lower and 2 upper points and 2 further expansion points, one to the top and one to the bottom 1 Electric Lock (Co404 model) from the frame to the door Class 6-2 Cylinder with European profile (according to EN1303); Class 4 external Cylinder Protection Defender (according to EN 1906); Opening Knob (internal side); Ready-for CoMETA Mechanical Lock Control Sensor; Ready-for additional CoMETA Co404N or I series electric lock, mounted in fixed part, top class antiburglary certification, grade 7 according to UNI EN 12209

EMERGENCY EXIT DOOR Co156 CoMETA Co156 Armored Emergency Door with RC4 grade anti-burglary certification. A double-use solution: armored door + CE certified emergency exit for escape-routes. Armored structure with 4 and 5mm steel thickness + 3 locking-points Professional Lock. Co156: accessories RC4 ANTI-BURGLARY CERTIFICATION Traffic light panel with intercom Central Unit with Electromagnet (holding force up to 650 Kg) Anti-panic push bar (new Co3M3) Professional Lock (Co306 with 3 locking-points and automatic relock system) Emergency signage panel Emergency push button Emergency Exit with Bullet-proof glass Blind version, steel structure The new Co3M3 Anti-panic push bar

ACCESS CONTROL SYSTEMS

ACCESS CONTROL CENTRALIZATION SYSTEMS CoMETA produces professional Access Control Systems with which is possible to create a system centralization, to perform the complete programming and monitoring of: electric security locks, security doors, emergency exits, interlocking security portals, gates, etc. Access Control Unit for: Interlocking Security Portals Emergency Exits Alarm Center Security Systems DVR Systems Etc. Access Control Units for: Electric Security Locks Badge Readers Fingerprint Readers Etc.

REAL APPLICATIONS: ITALY INTERLOCKING SECURITY PORTALS

OUR PRODUCTS SECURITY LOCKS SECURITY PORTALS with interlocking doors EMERGENCY EXITS & ARMORED DOORS INTERLOCKING SYSTEMS SECURITY SYSTEMS BIOMETRIC SYSTEMS (Fingerprint & Face Detection) SECURITY REVOLVING DOORS SPECIAL SECURITY PORTALS SWINGING-SLIDING SECURITY PORTALS TRANSPARENT SECURITY SHUTTERS SECURITY DRAWERS & STORAGE CABINETS ELECTROMAGNETS & ACCESSORIES

We are what we repeatedly do. Excellence then, is not an act, but a habit. Aristotle

CoMETA offers high quality solutions for «security» and for «safety». Our solid reputation comes from our ethic driven way of work and many controls imposed by international certifications: ISO 9001 certified quality systems, OHSAS 18001 occupational health & safety, ISO 14001 environmental management system. All the certifications constitute a valid reference point for those who demand: high performance, quality and reliability.

CoMETA SpA HEADQUARTERS & PRODUCTION Florence, Italy 50028 Tavarnelle Val di Pesa Via Leonardo Da Vinci, 116 Tel. +39 055 8070303 Cometa France Headquarters Paris, France 33 Rue des Chardonnerets ZAC de Paris Nord II 93290 Tremblay en France +33 (0)148630204 info@cometafrance.com Milan Business Branch Milan, Italy +39 3315270237 infomi@cometaspa.com Padua Business Branch Padua, Italy Viale del Lavoro, 70 Z.I. Roncajette 35020 Ponte S. Niccolò +39 0498966592 infopd@cometaspa.com Rome Business Branch Rome, Italy +39 3917380513 inform@cometaspa.com