Product Guide & Price List

the heater people Product Guide & Price List Valid from 1st January 2018 specialists in Commercial and industrial heaters Underfloor heating and Heating cables 2018

Typical heating GARDENS & PATIOS STORE ENTRANCES COMMUNITY HALLS Patio heaters - page 52 OFFICES Air Curtains - page 36 WAREHOUSES Radiant cassettes - page 61 PACKING AREAS Ceiling panels - page 64 Industrial fan heaters - page 38 Halogen heaters - page 56

applications SHOPS CHURCHES System X - page 26 Pew heaters - page 44 DINING AREAS WATER TREATMENT PLANTS Terrace heaters - page 50 HAZARDOUS AREAS ATEX tubular heaters - page 48 Industrial tubular heaters - page 46 WE CAN HELP SELECT THE RIGHT HEATER FOR AN APPLICATION CALL US TO DISCUSS YOUR NEXT HEATING PROJECT

Commercial and Industrial, Electric Heaters and Controls Catalogue and Price List Valid from 1st January 2018 Underfloor Heating Mirror Demisters M Series Underfloor Heating Mats 6 EHC Underfloor Heating Cables 8 F Series Underfloor Foil Mats 10 LH Underfloor Heating Films 12 LH-K Underfloor Heating Film Kits 14 IHC In-Screed Heating Cables 15 CONTROLS for Underfloor Heating 16 MD Mirror Demister Pads 18 6-17 Heating PW Pre-terminated Cables for Pipe Freeze Protection 19 Cables CRJ Self Regulating Cable for Pipe Freeze Protection 20 & Freeze Protection WM Self Regulating Hot Water Maintenance Cable 22 19-24 S Series Snow and Ice Melting Heating Mats 23 GP Self Regulating Cable for Gutters & Downpipes 24 18 Underfloor Heating and Heating Cables Fan Assisted Heaters SYSTEM X The Flexible Commercial Heating System 26 SCH Suspended Ceiling Heaters 28 SMH Surface Mount Ceiling Heaters 30 800 Series Over door/high Level Heaters 32 RH Recessed Ceiling Heaters 34 HCA Air Curtains 36 OUH Industrial Unit Heaters 38 DSU Destratification Units 41 WHE Compact Heavy Duty Wall Heaters 42 26-42 Convection Heaters Radiant Heaters BLS 110V Convector 43 BLC Pew Heaters 44 SWD Industrial Tubular Heaters 46 TX Explosion-Proof Tubular Heaters 48 ETH Terrace Heaters 50 HWP2 Patio Heaters 52 Magic Lamp Halogen Lamp 55 HN Halogen Heaters 56 MC1 Halogen Heater Control Box 59 ESP Radiant Cassettes 61 RP Radiant Ceiling Panels 64 CH Ceramic Heaters 66 RL Replacement Halogen Lamps 68 43-49 50-68 Commercial and Industrial Heaters and Controls Controls CONTROLS Specifications: Thermostats 69 Timers 76 Switches 77 System X 79 69-79 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Underfloor Heating and Heating Cables Underfloor Heating and Heating Cables web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

M Series Heating Mats Standard Output Mats (150W/m²) Suitable as a main source of heating in most rooms UNDERFLOOR HEATING An economic means of heating a room and providing a luxurious warm floor Manufactured to the highest quality and backed by a Lifetime Warranty Application Suitable for any room including conservatories, bathrooms and wet rooms Ideal for use with a wide variety of floor surfaces including ceramic tiles, porcelain tiles, marble, slate, stone, carpet, vinyl, engineered wood and laminate flooring. Features Twin core cable assembled onto fibre glass web 3m power lead Continuous earth protection foil Continuous double sided fixing tape M Series: heat up to 16m² with a single mat Model Heated Area (m²) Mat Size (m) kw List Price M150-005 0.5 1.0 x 0.5 0.07 48.00 M150-010 1.0 2.0 x 0.5 0.15 52.00 M150-015 1.5 3.0 x 0.5 0.22 66.00 M150-020 2.0 4.0 x 0.5 0.30 88.00 M150-025 2.5 5.0 x 0.5 0.37 96.00 M150-030 3.0 6.0 x 0.5 0.45 115.00 M150-035 3.5 7.0 x 0.5 0.52 126.00 M150-040 4.0 8.0 x 0.5 0.60 151.00 M150-045 4.5 9.0 x 0.5 0.67 159.00 M150-050 5.0 10 x 0.5 0.75 173.00 M150-060 6.0 12 x 0.5 0.90 211.00 M150-070 7.0 14 x 0.5 1.05 229.00 M150-080 8.0 16 x 0.5 1.20 240.00 M150-090 9.0 18 x 0.5 1.35 262.00 M150-100 10 20 x 0.5 1.50 280.00 M150-110 11 22 x 0.5 1.65 320.00 M150-120 12 24 x 0.5 1.80 348.00 M150-140 14 28 x 0.5 2.10 385.00 M150-160 16 32 x 0.5 2.40 441.00 High Output Mats (200W/m²) Recommended for Conservatories Model Heated Area (m²) Mat Size (m) kw List Price M200-010 1.0 2.0 x 0.5 0.20 56.00 M200-015 1.5 3.0 x 0.5 0.30 75.00 M200-020 2.0 4.0 x 0.5 0.40 86.00 M200-030 3.0 6.0 x 0.5 0.60 102.00 M200-040 4.0 8.0 x 0.5 0.80 140.00 M200-050 5.0 10 x 0.5 1.00 185.00 M200-060 6.0 12 x 0.5 1.20 225.00 M200-070 7.0 14 x 0.5 1.40 259.00 M200-080 8.0 16 x 0.5 1.60 317.00 M200-090 9.0 18 x 0.5 1.80 344.00 M200-100 10 20 x 0.5 2.00 425.00 6 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Low Output Mats (100W/m²) Recommended for well insulated properties Model Heated Area (m²) Mat Size (m) kw List Price M100-010 1.0 2.0 x 0.5 0.10 50.00 M100-015 1.5 3.0 x 0.5 0.15 60.00 M100-020 2.0 4.0 x 0.5 0.20 87.00 M100-030 3.0 6.0 x 0.5 0.30 107.00 M100-040 4.0 8.0 x 0.5 0.40 147.00 M100-050 5.0 10 x 0.5 0.50 169.00 M100-060 6.0 12 x 0.5 0.60 202.00 M100-070 7.0 14 x 0.5 0.70 220.00 M100-080 8.0 16 x 0.5 0.80 234.00 M100-090 9.0 18 x 0.5 0.90 257.00 M100-100 10 20 x 0.5 1.00 279.00 M100-120 12 24 x 0.5 1.20 347.00 Mat Installation M Series heating mats can be installed in flexible selflevelling compound or directly into tile adhesive. When using with carpet, vinyl, engineered wood or laminate flooring the lowest tog underlay should be selected. If there is any doubt about the suitability of a floor surface for use with underfloor heating, confirmation should be sought from the flooring supplier. Selection Typical M Series Installation Mat cut here LIFETIME WARRANTY NEXT DAY DELIVERY FREE DESIGN SERVICE Kitchen Cabinet Mat cut here UNDERFLOOR HEATING The objective is to cover as high a percentage of the free floor area as possible. Mats should not be installed under fixtures such as kitchen cabinets and shower trays. As a rule of thumb, select a mat covering an area approximately 10% smaller than the free floor area. In larger rooms, it is common practice to use two or more mats. Generally, the mats are connected in parallel and controlled by a single thermostat. Insulation Boards Limits downward heat loss Model Dimensions (mm) Area Covered (m²) List Price F-Board-6 1200 x 600 x 6 0.72 15.00 F-Board-10 1200 x 600 x 10 0.72 16.00 Cold lead Electrical connection + thermostat Mat cut here Accessories Model Description List Price Floorprep Primer for improved adhesion 11.00 500ml (covers 6m² approx - diluted 1:1) Floorroll Roller for applying Primer 6.00 EHM-R-Kit Cable Repair Kit (emergency use) 26.00 F-Board-6 and -10 Emergency Repair Kit Floorprep Primer & Roller FOR THERMOSTATS - See PAGE 16 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 7

EHC Heating Cables UNDERFLOOR HEATING An economic means of heating a room and providing a luxurious warm floor Ideally suited to small and irregularly shaped rooms Manufactured to the highest quality and backed by a Lifetime Warranty Applications Suitable for any room including conservatories, bathrooms and wet rooms Ideal for use with a wide variety of floor surfaces including ceramic tiles, porcelain tiles, marble, stone, carpet, vinyl, engineered wood and laminate flooring. Features Twin core cable supplied with high adhesion tape 3m power lead Continuous earth protection foil Heat Cables Model kw Heated Area (m²) Cable Length (m) List Price EHC-012 0.12 0.7 1.0 11 45.00 EHC-020 0.20 1.1 1.5 19 49.00 EHC-025 0.25 1.6 2.0 24 55.00 EHC-032 0.32 2.1 2.5 32 69.00 EHC-040 0.40 2.6 2.9 37 71.00 EHC-045 0.45 3.0 3.3 46 84.00 EHC-052 0.52 3.4 3.8 50 87.00 EHC-060 0.60 3.9 4.5 64 109.00 EHC-075 0.75 4.6 6.0 76 121.00 EHC-095 0.95 6.1 7.5 87 142.00 EHC-110 1.10 7.6 8.5 115 174.00 EHC-130 1.30 8.6 10.0 131 194.00 EHC-170 1.70 10.1 13.0 159 258.00 EHC-200 2.00 13.1 15.5 194 342.00 Insulation Boards - Limits downward heat loss Model Dimensions (mm) Area Covered (m²) List Price F-Board-6 1200 x 600 x 6 0.72 15.00 F-Board-10 1200 x 600 x 10 0.72 16.00 8 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel +44 (0)1293 547361 fax +44 (0)1293 531432

Tiles Tile adhesive Typical EHC Installation Fixing tape Accessories EHC Heating cable Subfloor F-Board Insulation (optional) Model Description List Price Floorprep Primer for improved adhesion 500ml (covers 6m² approx. diluted 1:1) 11.00 Floorroll Roller for applying Primer 6.00 EHM-R-Kit Cable repair kit (emergency use) 26.00 UNDERFLOOR HEATING Cable Installation EHC heating cables can be installed in flexible self-levelling compound or directly into tile adhesive. When using with carpet, vinyl, engineered wood or laminate flooring the lowest tog underlay should be selected. F-Board-6 and -10 Emergency Repair Kit Floorprep Primer & Roller If there is any doubt about the suitability of a floor surface for use with underfloor heating, confirmation should be sought from the flooring supplier. Selection Electrical connections + thermostat Cold lead The objective is to cover as high a percentage of the free floor area as possible. Cables should not be installed under fixtures such as kitchen cabinets and shower trays. In larger rooms, it is common practice to use two or more cables. Generally, the cables are connected in parallel and controlled by a single thermostat. An EHC heating cable installed in a bathroom FOR THERMOSTATS - See PAGE 16 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 9

F Series Foil Heating Mats for laminate and engineered wood floors UNDERFLOOR HEATING An economic means of heating a room and providing a luxurious warm floor Manufactured to the highest quality and backed by a 10 Year Warranty Installed without adhesives or compounds Applications Suitable for any room including bathrooms Specifically designed for laminate or engineered wood floors Features Heating cables sandwiched between 2 layers of aluminium ensuring excellent heat distribution Can be manipulated to fill a space just like a conventional heating mat Low profile (2mm approximate) keeps floor build-up to a minimum 3m power lead 10 F Series Foil Heating Mats Model Heated Area (m²) Mat Size (m) kw List Price F140-010 1.0 2.0 x 0.5 0.14 57.00 F140-015 1.5 3.0 x 0.5 0.21 79.00 F140-020 2.0 4.0 x 0.5 0.28 92.00 F140-030 3.0 6.0 x 0.5 0.42 124.00 F140-040 4.0 8.0 x 0.5 0.56 161.00 F140-050 5.0 10 x 0.5 0.70 187.00 F140-060 6.0 12 x 0.5 0.84 217.00 F140-070 7.0 14 x 0.5 0.98 259.00 F140-080 8.0 16 x 0.5 1.12 279.00 F140-090 9.0 18 x 0.5 1.26 337.00 F140-100 10 20 x 0.5 1.40 348.00 F140-120 12 24 x 0.5 1.68 406.00 F140-140 14 28 x 0.5 1.96 500.00 F Series foil heating mat specifically designed for laminate and engineered wood floors Insulation and Fixing Tape Model Description Area Covered List Price (m²) I-Pack-6 Pack of 19 sheets of I-Board-6 insulation/underlay 6mm thick 9.76 28.00 I-Board-6 Individual sheet insulation/underlay 6mm thick 0.5 3.00 LHT Fixing tape for I-Board 10 10.00 AL-50 Fixing tape for F Series mat 10 10.00 10 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Mat Installation F Series mats should be installed directly below laminate or engineered wood flooring and held in place with aluminium tape. The mats should be installed on top of a layer of I-Board-6 insulation/underlay which should be held in place with LHT high adhesion tape. A low profile F Series Installation Laminate or engineered wood flooring F Series Foil Heating Mat Selection I-Board-6 Insulation/underlay Subfloor The objective is to cover as high a percentage of the free floor area as possible. Mats should not be installed under fixtures such as kitchen cabinets and shower trays. As a rule of thumb, select a mat covering an area approximately 10% smaller than the free floor area. In larger rooms, it is common practice to use two or more mats. Generally, the mats are connected in parallel and controlled by a single thermostat. UNDERFLOOR HEATING Typical F Series Installation in a bathroom Externally mounted thermostat Cold Lead Cut mat here Cut mat here Cut mat here BATH Cut mat here Cut mat here SHOWER TRAY FOR THERMOSTATS - See PAGE 16 I-Board-6 LHT High Adhesive Tape AL-50 Aluminium Tape web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 11

LH Heating films for laminate and engineered wood floors An economic means of heating a room and providing a luxurious warm floor Manufactured to the highest quality and backed by a 10 Year Warranty Installed without adhesives or compounds UNDERFLOOR HEATING Application Suitable for any room except bathrooms and wet rooms Specifically designed for laminate or engineered wood floors Features Low profile system, combined thickness of film, underlay and vapour barrier approximately 7mm Quick installation without the need for adhesives or compounds Films can be reduced in length on site 4m power leads 10 LH Heating Films Easy to install under laminate or engineered wood without adhesive LH Heating for Laminate & Engineered Wood Floors 400mm wide Heating Film 1030mm wide Heating Film Model kw Length (m) List Price Model kw Length (m) List Price LH4-010 0.04 1.0 25.00 LH10-010 0.13 1.0 42.00 LH4-015 0.06 1.5 30.00 LH10-015 0.19 1.5 55.00 LH4-020 0.09 2.0 34.00 LH10-020 0.26 2.0 68.00 LH4-025 0.11 2.5 39.00 LH10-025 0.32 2.5 82.00 LH4-030 0.13 3.0 41.00 LH10-030 0.39 3.0 95.00 LH4-035 0.15 3.5 43.00 LH10-035 0.45 3.5 108.00 LH4-040 0.17 4.0 54.00 LH10-040 0.52 4.0 122.00 LH4-045 0.19 4.5 58.00 LH10-045 0.58 4.5 135.00 LH4-050 0.21 5.0 63.00 LH10-050 0.65 5.0 148.00 LH4-060 0.26 6.0 73.00 LH10-060 0.78 6.0 175.00 LH4-070 0.30 7.0 84.00 LH10-070 0.91 7.0 204.00 LH4-080 0.34 8.0 93.00 LH10-080 1.04 8.0 230.00 LH4-090 0.39 9.0 100.00 LH10-090 1.17 9.0 257.00 LH4-100 0.43 10 111.00 LH10-100 1.30 10 282.00 Insulation, vapour barrier and fixing tape Model Description Area Covered (m²) List Price I-Pack-6 Pack of 19 sheets of I-Board-6 insulation/underlay 6mm thick 9.76 28.00 I-Board-6 Single sheet insulation/underlay 6mm thick 0.5 3.00 LHT Fixing tape for I-Board and vapour barrier 10 10.00 VB Vapour Barrier 12 20.00 12 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Selection and Installation 1. Cover the entire floor surface with I-Board-6 insulation/underlay and hold in place with LHT tape 2. Select the best combination of LH10 and LH4 films to fill the free floor area and lay on top of the I-Board-6 (where possible keep all electrical connections along one wall) 3. Cover the entire floor area VB vapour barrier and hold in place with LHT tape Laminate floor VB Vapour barrier LH Film I-Board-6 Insulation/ underlay UNDERFLOOR HEATING Subfloor Live + Neutral Cables The components of an LH heating system: no adhesives or compounds are required Electrical connections + thermostat Cold lead I-Board-6 LHT High Adhesive Tape VB Vapour Barrier Built-in Wardrobe FOR THERMOSTATS - See PAGE 16 Typical LH Installation web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 13

LH-K Heating film kits for laminate and engineered wood floor An alternative to our LH pre-terminated films Allows the professional installer to tailor a heating system precisely to a specific space Provides 130W/m² power output Manufactured to highest quality for complete peace of mind and backed by a ten year warranty See LH page 12 for applications, specification and floor build-up. UNDERFLOOR HEATING Features As LH except 500mm wide film can be cut and terminated at any point Kit includes sufficient components (including crimps and cables) for most standard shaped rooms. Kit Contents Roll of 500mm wide 130W/m² heating film 15m insulated cold lead (brown) 15m insulated cold lead (blue) 20 connection crimps 20 insulating discs 1m mastic tape Crimping tool Installation instructions. The following items must be ordered separately (see page 12) I-Board-6 insulation/underlay sufficient to cover the entire floor area VB vapour barrier sufficient to cover the entire floor area LHT fixing tape one roll of LHT tape for every 10m² of floor area Thermostat. LH-K Kit - Specifications and Prices LH-K 'Top Ups' Roll of film Cold Leads Model Square Area Covered List Price Each LH-K05 Up to 5m² 254.00 LH-K10 5 to 10m² 371.00 LH-K15 10 to 15m² 487.00 LH-K20 15 to 20m² 604.00 Pack of 20 crimps Mastic tape LHK- Kit top ups Model Description List Price LHTU-05 Roll of film 5m² 139.00 LHTU-10 Roll of film 10m² 277.00 LHTU-15 Roll of film 15m² 416.00 LHTU-20 Roll of film 20m² 554.00 LHTU-BR 15m cold lead brown 18.00 LHTU-BL 15m cold lead blue 18.00 LHTU-CR 20 Crimps 17.00 LHTU-MA 1m mastic tape 33.00 LHTU-ID 20 insulating discs 2.00 LHTU-CT Crimping Tool 38.00 Pack of 20 insulating discs Crimp tool FOR THERMOSTATS - See PAGE 16 14 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

IHC In-Screed Heating Cable A more robust heating cable suitable for installation in a concrete screed Manufactured to the highest quality and backed by a 10 year warranty Applications Suitable for any type of room and both domestic and commercial installations Specifically designed for installation in a concrete screed Can be used with a wide variety of floor surfaces Features Twin core cable 3m power lead Continuous earth protection Held in place with metal fixing strips 10 Drum of IHC in-screed cable with IHC-F fixing strip UNDERFLOOR HEATING In Screed Heating Cables Model kw Cable length (m) Area Covered (m²) @ 100W/m² Area Covered (m²) @ 150W/m² Area Covered (m²) @ 175W/m² List Price IHC-016 0.16 8.3 1.6 1.1 0.9 37.00 IHC-027 0.27 14.0 2.7 1.8 1.5 48.00 IHC-034 0.34 17.2 3.4 2.3 1.9 56.00 IHC-045 0.45 22.5 4.5 3.0 2.6 67.00 IHC-054 0.54 27.4 5.4 3.6 3.1 73.00 IHC-064 0.64 32.1 6.4 4.3 3.7 85.00 IHC-072 0.72 35.8 7.2 4.8 4.1 95.00 IHC-087 0.87 43.8 8.7 5.8 5.0 109.00 IHC-107 1.07 53.5 10.7 7.1 6.1 118.00 IHC-129 1.29 64.4 12.9 8.6 7.4 133.00 IHC-158 1.58 79.0 15.8 10.5 9.0 154.00 IHC-185 1.85 92.4 18.5 12.3 10.6 193.00 IHC-230 2.30 117.3 23.0 15.3 13.1 249.00 IHC-275 2.75 141.4 27.5 18.3 15.7 315.00 IHC-F Metal fixing strip (10m) typically one strip is required for every 8m² of heated area 23.00 Cable Selection The objective is to cover as high a percentage of the free floor area as possible. Cables should not be installed under fixtures such as kitchen cabinets and shower trays. In larger rooms, it is common practice to use two or more cables which are usually connected in parallel and controlled by a single thermostat. Typically, we suggest a watt density between 150W/m² and 175W/m² however lower densities are often used in well insulated properties Cable Installation IHC cables are installed on a layer of insulation using IHC-F fixing strip. The cable should be arranged in evenly spaced loops and covered in 80mm to 100mm of concrete screed. IHC cables can be used with a wide variety of floor surfaces. If there is any doubt about the suitability of the suitability of a floor surface for use with underfloor heating, confirmation should be sought from the flooring supplier. FOR THERMOSTATS - See PAGE 16 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 15

CONTROLS for Underfloor Heating Thermostats UNDERFLOOR HEATING T16CW Touch screen programmable white A16C Manual T16CS Touch screen programmable silver U16C Basic programmable T16CB Touch screen programmable black Floor probe and conduit supplied as standard 'Air and floor or floor only control Smart Thermostats Control heating using ios (8.0 or later) and Android (4.0 or later) devices T16R Optional air sensor for T16C Floor probe and conduit provided with every BN Thermic thermostat new new S16CW NEW Smart Thermostat - with white, or brushed chrome surround S16CB NEW Smart Thermostat - with black, or black with chrome surround Thermostats Model Load Description Details List Price T16CW 16A Programmable Touch Screen (White) Page 69 102.00 T16CS 16A Programmable Touch Screen (Silver) Page 69 107.00 T16CB 16A Programmable Touch Screen (Black) Page 69 107.00 T16R Optional IP65 remote sensor for T16C thermostats Page 69 14.00 S16CW 16A Smart Thermostat white or brushed chrome (installer selects) Page 70 199.00 S16CB 16A Smart Thermostat black or black with chrome (installer selects) Page 70 199.00 U16C 15A Programmable Thermostat Page 69 80.00 A16C 15A Manual Thermostat Page 69 70.00 16 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Contactors For use when the installed load exceeds the switching capacity of the thermostat Contactors Model Amperage Max kw (230V 1ph) Details List Price CON-32 32 7 Page 79 34.00 CON-50 50 11.5 Page 79 45.00 CON-80 80 18 Page 79 86.00 ENCL-D Enclosure for CON-32 and CON-50 Page 79 18.00 Wireless Control Our wireless thermostat can provide simple, easy to install control in a single room and is especially convenient when one thermostat is required to control more than one heating mat. It can also control larger loads without requiring a noisy contactor. For multi-room installations, the introduction of a central programmer allows all the rooms in a house to be controlled from a single point. CON-32 Contactor Relay Box Usually mounted at skirting level Switching capacity 16A Supplied with floor probe Suitable for any room Programmable Thermostat Can be paired with up to four relay boxes UNDERFLOOR HEATING Optional Central control Touch Screen device Can be paired with up to 24 thermostats Wireless Control Prices WSB-1 Relay Box Model Description Details List Price WSB-1 Wireless Relay Box 16A Page 70 85.00 WST-1 Wireless Thermostat (for use with WSB-1 relay box) Page 70 91.00 WSP-1 Wireless Central Programmer Page 71 194.00 WSP-1 Central Programmer A Typical Wireless Control System WSP-1 Central Programmer WST-1 Wireless Thermostat LARGE ROOM Requiring 2x WSB-1 Relay Boxes WSB-1 Relay Box WSB-1 Relay Box WST-1 Wireless Thermostat WSB-1 Relay Box SMALLER ROOM Requiring 1x WSB-1 Relay Box WST-1 Wireless Thermostat web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 17

MD Mirror Demister Pads MIRROR DEMISTERS MD-50 50W Demister pad with a typical running cost of 5 pence per week Providing a mist free mirror 100% effective in little over 2 minutes Very low energy consumption Simply integrated into the lighting circuit ensuring that they are not left running Features Protects an area approximately 20% larger than the pad itself Double insulated and completely sealed for total safety Less than 1mm thick Peel off adhesive backing 1m long power lead BESPOKE SIZES AVAILABLE Peel-off adhesive backing Selection PLEASE CALL US FOR PRICE AND DELIVERY MD Mirror Demister Pads - Specifications and Prices Model Volts Watts Dimensions (mm) List Price MD-12 230 12 252 x 274 22.00 MD-28 230 28 574 x 274 28.00 MD-50 230 50 519 x 524 39.00 MD-100 230 100 1004 x 524 55.00 18 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

PW Pre-terminated Water Pipe Freeze Protection Cable Prevents water from freezing in metal and plastic pipes Avoids the cost and inconvenience of burst water pipes Quick and simple to install Applications Domestic properties Commercial premises Mobile homes Features 1.5m power lead and 3-pin plug Built-in thermostat (pre-set at 3 C) Fully moisture proof All cables require 230V supply Installed onto pipe and under insulation (20mm max) Straight run of cable protects pipes up to 50mm dia. Can be wound in an evenly spaced helix (always use the shortest suitable cable) PW Water Pipe Freeze Protection Cable a low price for peace of mind PIPE FREEZE & GUTTER PROTECTION Cables and Prices Model Watts Heated Length List Price (m) PW-01 12 1 62.00 PW-02 24 2 68.00 PW-03 36 3 74.00 PW-04 48 4 79.00 PW-06 72 6 85.00 PW-10 136 10 86.00 PW-14 152 14 88.00 PW-21 281 21 96.00 PW-30 337 30 110.00 PW-42 490 42 128.00 Accessories PW-06 with built-in thermostat and UK plug Model Description List Price PF-L Caution label (10 pack) apply to outside of insulation 5.00 PF-T Fixing Tape (33m x 19mm) 2.00 AL-50 Aluminium Tape (45m x 50mm) for wrapping plastic pipes before installing cable 10.00 PF-T Fixing Tape AL-50 Aluminium Tape PF-L Caution Labels web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 19

CRJ Self Regulating Water Pipe Freeze Protection Cable PIPE FREEZE & GUTTER PROTECTION Prevents water from freezing in metal and plastic pipes Avoids the cost and inconvenience of burst water pipes Supplied by the metre order as much or as little as required Typical Applications Stables Sprinkler systems Farms Features Power consumption decreases as ambient temperature increases Can be cut to length on site Can be double wrapped without creating hot spots Full length earth braid All cables require 230V supply Installed onto pipe and under insulation CRJ and CRJM Cables Cables and Prices Model W/m List Price/m (under 50m) List Price/m (50m+) CRJM-11 11 7.00 6.00 CRJM-17 17 8.00 7.00 CRJ-25 25 15.00 14.00 PF-T Fixing Tape AL-50 Aluminium Tape PF-L Caution Labels Accessories Model Description List Price CRJ-T1 Termination Kit (one per circuit) 11.00 CRJ-S Splice/T Kit (one for every splice or T joint) 10.00 PF-L Caution label (10 pack) apply to outside of insulation 5.00 PF-T Fixing Tape (33m x 19mm) 2.00 AL-50 Aluminium Tape (45m x 50mm) for wrapping plastic pipes before installing cable 10.00 20 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

CRJ Selection Table (Based on a minimum ambient temperature of -18 C and rock wool insulation) Outside Pipe Insulation Thickness (mm) Diameter (mm) 12 25 50 12 CRJM-11 Straight CRJM-11 Straight CRJM-11 Straight 25 CRJM-17 Straight CRJM-11 Straight CRJM-11 Straight 50 CRJ-17 1.6m cable/1m pipe or CRJM-11 Straight CRJM-11 Straight CRJ-25 Straight 75 ---------- CRJM-11 Straight CRJM-11 Straight 100 ---------- CRJM-17 Straight CRJ-11 Straight 150 ---------- Maximum Circuit Length and Breaker Size Cable Max. Circuit (m) Breaker (A) CRJM-11 128 16 CRJM-17 102 20 CRJ-25 126 32 CRJ-17 1.6m cable/1m pipe or CRJ-25 Straight Buswires. Inherently temperature-safe self-regulating matrix. CRJM-17 Straight PIPE FREEZE & GUTTER PROTECTION Thermoplastic electrical insulation. FST2-IN Thermostat for indoor use CRJ-T Termination Kit Prepares cable for electrical connection and seals the far end Continuous conductive covering of metal braid. (-C) Thermoplastic or fluoropolymer outer jacket. FST2-EX IP65 Thermostat for outdoor use CRJ-S Splice kit for joining two lengths of cable or for making a T joint CRJ Self Regulating Cable - Dispensed by the metre Controls Type Description Model Details List Price Thermostat Frost thermostat Indoor Use (20A) FST2-IN Page 72 68.00 Thermostat Frost thermostat Outdoor Use (20A) FST2-EX Page 72 129.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 21

WM Self Regulating Hot Water Maintenance Cable PIPE FREEZE & GUTTER PROTECTION Maintains hot water in pipes at desired temperature Ensures hot water is instantly available Eliminates need for return pipework and re-circulating pumps Features Typical Applications Maintains water temperature at approximately 50 C to 60 C Output reduces automatically as water temperature rises Can be cut to length on site Full length earth braid Requires 230V supply and must be installed under insulation Hot water pipes in both domestic and commercial buildings. Insulation Thickness (mm) Cable should be installed in a straight line under installation Maintain Temperature 15mm Pipe 22mm Pipe 28mm Pipe 35mm Pipe 42mm Pipe 54mm Pipe 60 C 25 30 40 50 60 75 55 C 20 25 30 40 50 60 50 C 15 20 25 30 40 50 Maximum Circuit Length and Breaker Size Max. Circuit (m) Breaker (A) 128 20 Cable and Price Model W/m List Price/m WM-09 9 12.00 PF-T Fixing Tape AL-50 Aluminium Tape PF-L Caution Labels Accessories Model Description List Price CRJ-T1 Termination Kit (one per circuit) 11.00 CRJ-S Splice/T Kit (one for every splice or T joint) 10.00 PF-L Caution label (10 pack) apply to outside of insulation 5.00 PF-T Fixing Tape (33m x 19mm) 2.00 AL-50 Aluminium Tape (45m x 50mm) for wrapping plastic pipes before installing cable 10.00 22 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

S Series Snow and Ice Melting Heating Mats Prevents accumulation of snow and ice Ensures year-round access to domestic and commercial buildings Ensures safety in icy conditions Typical Applications Driveways Ramps Disabled access Patios Parking areas Pavements Features 10 Two-core cable assembled onto a web 5m cold lead Continuous earth braid 400W/m² power density Selection and Installation Simply select the mat or combination of mats that cover the area that requires protection. ERC mats can be installed in concrete or in fine washed sand below paving slabs. Control can be by a simple frost thermostat or by our ERC-T1 thermostat. The ERC-T1 is recommended for larger installations as it will only switch on the heating when the temperature is low and there is moisture present. S Series Snow and Ice Melting Mat. An economic means of preventing the accumulation of snow and ice. S Series - Snow and Ice Melting Mats Model Heated Area (m²) Mat Size (m) kw List Price S400-009 0.9 1.1 x 0.75 0.34 100.00 S400-014 1.4 1.9 x 0.75 0.57 108.00 S400-022 2.2 2.9 x 0.75 0.88 131.00 S400-026 2.6 3.4 x 0.75 1.03 149.00 S400-033 3.3 4.4 x 0.75 1.32 179.00 S400-043 4.3 5.7 x 0.75 1.7 206.00 S400-047 4.7 6.3 x 0.75 1.88 217.00 S400-061 6.1 8.2 x 0.75 2.45 286.00 S400-073 7.3 9.7 x 0.75 2.9 311.00 S400-085 8.5 11.3 x 0.75 3.4 397.00 S400-130 13 17.3 x 0.75 5.2 600.00 S400-184 18.4 24.5 x 0.75 7.35 1066.00 PIPE FREEZE & GUTTER PROTECTION ERC-T1 Providing economic control of ERC Snow and Ice Melting Mats FST2-EX Low cost control for smaller installations ERC Snow and Ice Melting Mat providing safe access to an office building Controls Type Description Model Details List Price Thermostat Weatherproof frost thermostat FST2-EX Page 72 129.00 Thermostat Electronic thermostat with ground sensor ERC-T1 Page 75 300.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 23

GP Self-regulating cable for Gutters and Downpipes PIPE FREEZE & GUTTER PROTECTION Stops accumulation of snow and ice Prevents damage to gutters and properties Reduces danger from collapsing gutters and falling icicles Applications Domestic properties Commercial Premises Features Power consumption decreases as ambient temperature increases No chance of hot spots from cables crossing or touching Can be cut to length on site UV resistant Full length earth braid Use a single run for gutters up to 120mm wide and an additional run for every extra 120mm Cables require 230V supply Connection to power lead via a suitable gel filled connector Tin coated copper bus wires Self limiting polymer with bonded jacket Thermoplastic insulation Keep gutters and downpipes ice-free FST2-EX IP65 Frost Thermostat Cable Price Model W/m List Price/m GP-18 18 13.00 Metal braid Thermoplastic over jacket Structure of GP-18 heating cable GC-E gel filled push fit end seal Accessories Model Description List Price GC-E Gel filled end seal 14.00 GP-S Spacer Kit (also protects against sharp edges) 20.00 GP-S spacer kit Optional Control Type Description Model Details List Price Thermostat IP65 Frost thermostat FST2-EX Page 72 129.00 Cable length against breaker size Breaker (A) 6 10 16 20 Max Cable length (m) 28 48 76 92 GP-S spacer protecting GP-18 cable from a sharp edge 24 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Commercial and Industrial Heaters and Controls Commercial and Industrial Heaters and Controls web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

SYSTEM X The Flexible Commercial Heating System FAN ASSISTED HEATERS SLASH INSTALLATION TIMES What is SystemX? A unique system for heating commercial premises ideal for shops Control 4 styles of heater in any combination and any sequence from a single point Why use SystemX? with System X slashes installation times typical shop installation* reduced by 4 hours Cat5 control connections mean zero connection errors System X controllers keep running costs to a minimum *Case study based on installing four ceiling mounted heaters, controller and thermostat Suspended Ceiling Heater Wall mounted heater Controller Surface mounted or Suspended heater Recessed heater SystemX Heaters Ceiling Heaters for 600 x 600 Grid Wall mounted/overdoor heaters Surface mounted or suspended heaters Recessed Heater Model kw List Price Model kw List Price Model kw List Price Model kw List Price XC-30 3.0 375.00 XD-30 3.0 357.00 XS-30 3.0 377.00 XR-20 2.0 303.00 XC-45 4.5 388.00 XD-60 6.0 526.00 XS-45 4.5 390.00 XR-30 3.0 343.00 XC-60 6.0 523.00 XD-90* 9.0 776.00 XS-60 6.0 519.00 XR-60 6.0 556.00 *XD-90 suitable for overdoor duty only 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

SystemX Control Components All System X controllers provide high heat/low heat/fan only (summer use) settings CX1 with thermostat CX3 without thermostat CX2 with tamper resistant thermostat CXS optional remote sensor for CX1 or CX2 XC-30 heaters mounted on a 600 x 600 ceiling grid Ceiling Void Type Description Model Details List Price Controller C/w thermostat CX1 Page 79 129.00 Controller C/w tamper resistant CX2 Page 79 131.00 thermostat Controller Without thermostat CX3 Page 79 121.00 Sensor Optional remote sensor CXS Page 79 24.00 for use with CX1 or CX2 Cable Cat5 terminated 5m DX05 --- 5.00 Cable Cat5 terminated 10m DX10 --- 8.00 Cable Cat5 terminated 20m DX20 --- 12.00 Joiner Cat5 cable joiner JX1 --- 3.00 Control daisy chain using Cat 5 cable XS-30 suspended from ceiling on drop rods Ceiling Void XR-30 recessed into plasterboard ceiling FAN ASSISTED HEATERS XD-30 wall mounted above door cooler air warm air cooler air warm air cooler air warm air cooler air warm air cooler air warm air 600 x 600 ceiling grid plasterboard ceiling CX1 controller A System X heater installation with one CX1 controller controlling 4 styles of heater Heater Technical Data - all heaters 230V except XD-90 which can be 400V 3ph and N if required Model kw Airflow Dimensions (mm) Recommended Mounting Height (m) High Low (m³/h) W D H Min Max XC-30 3.0 2.0 245 576 592 153 2.4 3.0 XC-45 4.5 2.25 345 576 592 153 3.0 4.0 XC-60 6.0 3.0 490 576 592 152 2.4 3.0 XD-30 3.0 2.0 245 635 108 225 1.8 3.0 XD-60 6.0 4.0 490 1105 108 225 1.8 3.0 XD-90 9.0 6.0 735 1620 108 225 1.8 3.0 XS-30 3.0 2.0 245 576 434 180 2.4 3.0 XS-45 4.5 2.25 345 576 434 180 3.0 4.0 XS-60 6.0 4.0 490 576 592 152 2.4 3.0 XR-20 2.0 1.0 132 363 230 175 1.8 2.4 XR-30 3.0 2.0 245 597 230 175 1.8 3.0 XR-60 6.0 4.0 490 1198 230 175 1.8 3.0 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 27

SCH Fan Assisted Heaters for 600 x 600 Ceiling Grid FAN ASSISTED HEATERS High quality commercial fan heaters manufactured in the UK Ceiling mounting allows free use of floor and wall space Suitable for a wide range of commercial premises Applications Shops Cafes Changing rooms Entrance Areas Features Designed to rest in the T bar of a 600 x 600 suspended ceiling grid Air inlet and outlet through the front panel no requirement for air supply from the ceiling void White aluminium egg-crate grille supplied with every heater Pre-wired to convenient rear-mounted terminal enclosures Output can be reduced from high to low by removing link in terminal enclosure Built-in electronic thermostat ('T' suffix only) All models can be switched directly by the CS-7 switch and/or RST2-IN or RST-TP thermostat CS-7 switch for high/low/fan only settings Heater range and pricing Model kw Built-in Thermostat List Price SCHG-30 3.0 No 228.00 SCHG-30T 3.0 Yes 303.00 SCHG-45 4.5 No 270.00 SCHG-45T 4.5 Yes 342.00 SCHG-60 6.0 No 378.00 SCHG-60T 6.0 Yes 460.00 3kW and 4.5kW heaters and grille Physical Data kw Dimension (mm) Required clearance Weight W D H above grid (mm) (kg) 3.0 576 592 153 200 9 4.5 576 592 153 200 10 6.0 576 592 152 200 13 6kW heater and grille 28 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Performance Data kw Volts Airflow (m³/h) db*@2m Recommended Mounting Height (m) High Low Min Max 3.0 2.0 230 245 56 2.4 3.0 4.5 2.25 230 345 60 3.0 4.0 6.0 4.0 230 490 58 2.4 3.0 *Noise levels are factory tested not laboratory tested Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 77 60.00 Thermostat Adjustable thermostat (not for use with 'T' suffix models) RST2-IN Page 72 74.00 Thermostat Tamperproof thermostat (not for use with 'T' suffix models) RST-TP Page 71 80.00 FAN ASSISTED HEATERS SCH heater installed in a school outfitters An SCH fan heater provides simple and reliable heating in a car service reception area Heater specifically designed for integration into a suspended ceiling grid FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 29

SMH Surface Mount Ceiling Heaters FAN ASSISTED HEATERS High quality commercial fan heaters manufactured in the UK Ceiling mounting allows free use of floor and wall space Ideal for premises that do not have suspended ceilings Applications Shops Cafes Changing rooms Entrance Areas Features Compact smart design with white paint finish Simple keyhole screw fixing to a conventional ceiling M6 threaded holes for suspension by drop rods Output can be reduced from high to low by removing link in terminal enclosure Built-in electronic thermostat ('T' suffix only) All models can be switched by the CS-7 controller Models without built-in thermostat can be controlled by the CS-7 controller and/or RST2-IN or RST-TP thermostat 3kW and 4.5kW versions Heater Range and Prices Model kw Built-in Thermostat List Price SMH-30 3.0 No 268.00 SMH-30T 3.0 Yes 345.00 SMH-45 4.5 No 285.00 SMH-45T 4.5 Yes 361.00 SMH-60 6.0 No 376.00 SMH-60T 6.0 Yes 458.00 Physical Data kw Dimension (mm) Weight (kg) 6kW Model W D H 3.0 575 392 152 8.0 4.5 575 392 152 11.0 6.0 575 592 152 12.5 SMH heater suspended from drop rods Performance Data kw Volts Airflow (m³/h) db*@2m Recommended Mounting Height (m) High Low Min Max 3.0 2.0 230/1 245 56 2.4 3.0 4.5 2.25 230/1 345 60 3.0 4.0 6.0 4.0 230/1 490 58 2.4 3.0 CS-7 switch for high/low/fan only settings *Noise levels are factory tested not laboratory tested 30 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 77 60.00 Thermostat Adjustable thermostat (not for use with 'T' suffix models) RST2-IN Page 72 74.00 Thermostat Tamperproof thermostat (not for use with 'T' suffix models) RST-TP Page 71 80.00 FAN ASSISTED HEATERS The rugged SMH is well suited to industrial applications SMH heaters: ideal for an open plan office A warm customer at a trade counter in Scotland FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 31

800 Series High Level Wall or Overdoor Fan Assisted Heaters High quality commercial fan heaters manufactured in the UK Smart modern appearance Can be used as a general purpose commercial space heater or as an overdoor heater FAN ASSISTED HEATERS Typical Applications Space heating or overdoor heating in the following premises Shops Entrance Areas Cafes Community halls Changing rooms Workshops Features Smart design with attractive white paint finish Dual function bracket: vertical discharge (overdoor) or angled discharge (general space heating) - overdoor only for 9kW models M8 threaded hole for drop rod suspension Panel front on/off switch Pre-wired to rear-mounted terminal enclosures Output can be reduced from high to low by removing link in terminal enclosure Built-in electronic thermostat ('T' suffix only) All models can be switched by the CS-7 controller Models without built-in thermostat can be controlled by the CS-7 controller and/or RST2-IN or RST-TP thermostat 830T with wall bracket fitted 860T with wall bracket fitted 890T Model with built in thermostat Heater Range and Prices Model kw Built-in Thermostat List Price 830 3.0 No 198.00 830T 3.0 Yes 252.00 860 6.0 No 339.00 860T 6.0 Yes 404.00 890 9.0 No 594.00 890T 9.0 Yes 677.00 Physical Data kw Dimension (mm) Weight (kg) W D H 3.0 635 108 225 7 6.0 1105 108 225 14 9.0 1620 108 225 17 CS-7 switch for high/low/fan only settings Two 3kW heaters over automatic doors 32 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Performance Data kw Volts Airflow (m³/h) db*@2m Recommended Mounting Height (m) High Low Min Max 3.0 2.0 230 245 56 1.8 3.0 6.0 4.0 230 490 58 1.8 3.0 9.0 6.0 230V or 400/3N 735 58 1.8 3.0 *Noise levels are factory tested not laboratory tested Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 77 60.00 Thermostat Adjustable thermostat (not for use with 'T' suffix models) RST2-IN Page 72 74.00 Thermostat Tamperproof thermostat (not for use with 'T' suffix models) RST-TP Page 71 80.00 3kW heater providing a warm welcome to customers FAN ASSISTED HEATERS 6kW heater combatting draughts in a Hampshire church 3kW heater keeping people warm in a clothing store. FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 33

RH Recessed Fan Assisted Heaters High quality commercial fan heaters manufactured in the UK Recessed installation reduces visual impact Suitable for ceiling or wall mounting FAN ASSISTED HEATERS RH-30 3kW recessed heater commonly installed above a door RH-20 Extremely compact 2kW recessed heater RH-60 6kW recessed heater with integral relay Typical Applications Space heating or overdoor heating in the following premises Shops Cafes Changing rooms Entrance Areas Community halls Workshops Features Air inlet and output through front panel no requirement for air supply to the rear of the heater White aluminium grille is the only visible part of heater Suitable for horizontal or vertical discharge Simple fixing through the face of the heater Pre-wired to rear-mounted terminal enclosures Output can be reduced from high to low by removing link in terminal enclosure Can be switched directly by the CS-7 switch and/or RST2-IN or RST-TP thermostat Heater Range and Prices Model kw List Price RH-20 2.0 173.00 RH-30 3.0 215.00 RH-60 6.0 454.00 RH-30 providing comfort heat in a charity shop 34 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

FAN ASSISTED HEATERS A pair of 3kW heaters welcoming customers in a shopping mall 6kW heater used as an overdoor heater in a hotel Physical Data kw Dimension (mm) Aperture A B Size (mm) Inset Clearance (mm) Weight (kg) 2.0 363 307 315 x 150 200 4 3.0 597 550 560 x 150 200 6 6.0 1198 1138 1148 x 150 230 12 Performance Data kw Volts Airflow db*@2m Recommended Mounting Height (m) High Low (m³/h) Min Max 2.0 1.0 230 132 50 1.8 2.4 3.0 2.0 230 245 56 1.8 3.0 6.0 4.0 230 490 58 1.8 3.0 *Noise levels are factory tested not laboratory tested CS-7 switch for high/low/ fan only settings Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 77 60.00 Thermostat Adjustable thermostat RST2-IN Page 72 74.00 Thermostat Tamperproof RST-TP Page 71 80.00 FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 35

HCA Air Curtain Provides an invisible barrier across entrances to commercial premises Reduces heating and air conditioning costs Minimises ingress of pollutants FAN ASSISTED HEATERS Typical Applications Large shops Offices Hospitals Hotels Features Attractive, sturdy design Wall mounting plate supplied as standard HCA air curtains reduce heating costs Four M6 threaded holes for drop rod suspension Control box provided with every air curtain offering high and low settings for airflow and heat Air Curtain Range and Prices Model kw (high setting) Length (mm) List Price HCA-09 9.0 1113 1159.00 HCA-13 13.5 1621 1430.00 HCA-18 18.0 2121 1868.00 Physical Data Model Dimensions (mm) Weight (kg) L D H HCA-09 1113 265 254 19.6 HCA-13 1621 265 254 25.4 HCA-18 2121 265 254 31.9 Performance Data Model Volts kw Airflow (m³/h) db* @ 3m Recommended Mounting Height (m) High Low High Low Min Max HCA-09 400/3N 9.0 4.5 1879 1444 66 2.5 4.0 HCA-13 400/3N 13.5 6.75 2617 2441 71 2.5 4.0 HCA-18 400/3N 18.0 9.0 4100 3834 68 2.5 4.0 *Noise levels are factory tested not laboratory tested Optional Thermostats and Prices Description Model Details List Price Standard room thermostat RST2-IN Page 72 74.00 Tamperproof Thermostat RST-TP Page 71 80.00 Thermostats are connected to the control box and will control heat output while the fan operates continuously. Control box supplied as standard Important Note. For an HCA air curtain to provide an effective air barrier, a high air velocity is required. The resulting noise output must be considered. For this reason, we do not recommend HCA air curtains for smaller shops or where people are working in close proximity to the entrance. 36 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

A pair of air curtains looking the part in a prestige London office building FAN ASSISTED HEATERS HCA air curtains reducing heating costs in a DIY store HCA air curtain suspended from drop rods web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 37

OUH2 Industrial Fan Heaters FAN ASSISTED HEATERS An effective means of heating industrial premises Extremely robust UK manufactured heaters Exceptional reliability backed by a 5 year warranty Typical applications Warehouses Workshops Factories Features FIVE YEAR WARRNTY Heavy gauge steel construction Bracket provided with every heater for wall or ceiling mounting Suitable for vertical suspension hooks provided as standard Built-in temperature control thermostat Optional control switch providing on/off/fan only settings A number of heaters can be controlled from a single point Auto-reset over-temperature protection and heat purge device to clear residual heat 5 OUH2 Unit Heater Robust, Rugged, Reliable Heater Range and Prices Model kw List Price OUH2-03 3.0 662.00 OUH2-05 5.0 679.00 OUH2-07 7.5 689.00 OUH2-10 10 699.00 OUH2-15 15 1087.00 OUH2-20 20 1148.00 OUH2-25 25 1208.00 Physical Data kw Dimensions (mm) Weight W D H (kg) 3 to 10 435 405 320 18 15 to 25 565 485 445 37 OUH2 wall mounted in a warehouse in Axminster, Devon 38 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Performance Data Model kw Volts Airflow db*@ 2m (m³/h) OUH2-03 3.0 230V or 400/3N 1100 60 OUH2-05 5.0 230V or 400/3N 1100 60 OUH2-07 7.5 230V or 400/3N 1100 60 OUH2-10 10 400V/3N 1100 60 OUH2-15 15 400V/3N 3150 62 OUH2-20 20 400V/3N 3150 62 OUH2-25 25 400V/3N 3150 62 *Noise levels are factory tested not laboratory tested OUH2 installed in a workshop in Billingshurst, West Sussex FAN ASSISTED HEATERS 25kW industrial fan heater installed in an automotive parts store OUH2 Unit Heater suspended using hooks provided Where roof height exceeds 4m we recommend using our DSU Destratification units see page 41 20kW heater providing background heat in a storage facility in Kent Control Options and Prices Type Description Model Details List Price Switch On/off/fan only settings OUH2-S Page 78 50.00 Timer Programmable PROTIM-7 Page 76 114.00 Thermostat Frost protection (overrides heater s built-in thermostat) FST2-IN Page 72 68.00 No neutral, 440V and 480V versions available - contact BN Thermic Continued... web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 39

OUH2 Industrial Fan Heaters Continued Mounting Options FAN ASSISTED HEATERS OUH2-S control switch fitted to a heater. Can be wall mounted if preferred A Typical Control Group The group can be a combination of any models from the OUH2 range 40 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

DSU Destratification Units Reducing heating bills by up to 30% by recycling warm air that has collected at high level. Recommended for industrial premises where roof height exceeds 4m Typical Applications Warehouses Exhibition Halls Ideally suited for use in conjunction with BN Thermic s OUH2 industrial fan heaters Features Reduces energy costs when roof Reduces heating costs by up to 30% height exceeds 4m Heavy duty steel construction Built-in thermostat automatically energises fan 4-way adjustable louvers Suspension kit supplied as standard (4 x 500mm chains and associated hooks) FAN ASSISTED HEATERS Specification and Prices Model Volts Airflow (m³/h) Fan Motor (W) Dimensions (mm) Roof height (m) Area Covered (m) db* at 5m Weight (kg) List Price H W D DSU-4 230 4000 200 385 560 560 4 to 7 20 x 20 45 18 688.00 DSU-8 230 8000 250 385 720 720 7 to 12 25 x 25 50 24 830.00 *Noise levels are factory tested not laboratory tested. Warehouse Example Without DSU Warm air accumulates at high level DSU-4 installed in a vehicle repair shop in Kent With DSU Warm air is recycled reducing heating costs by up to 30% Top view of DSU-8 showing powerful fan web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 41

WHE Compact Heavy Duty Wall Mounted Fan Assisted Heaters Ideal for heating industrial premises where space is limited Robust construction suitable for industrial installations and public areas Exceptional reliability backed by a 5 year warranty FAN ASSISTED HEATERS Typical Applications Crane cabs Toll Booths Workshops Features Common to all Models FIVE YEAR WARRNTY Can be mounted horizontally or vertically Can be recessed or surface mounted with optional surface-mount box Heavy gauge steel construction Available with or without built-in thermostat When thermostat is fitted, it can be made tamperproof if required Heater Range and Prices 5 WHE with optional adjustable thermostat Model kw Voltage Built-in Thermostat List Price WHE-2024 2.0 230 No 295.00 WHE-2024T 2.0 230 Yes 372.00 WHE-1512 1.5 110 No 295.00 WHE-1512T 1.5 110 Yes 372.00 WHE-SB Optional surface mount box 57.00 4 alternative mounting configurations WHE fitted into surface mount box Technical Data Optional surface mount box Description Airflow (m³/h) Dimensions (mm) Weight (kg) W D H All heaters 135 206 108 406 4 Surface Box N/A 206 76 407 1 42 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

BLS 110V Low Level Convector Heaters For use where only 110V supply is available Provides comfort or background heat Low running costs Typical Applications Site huts Space heating in a wide variety of commercial and industrial premises BLS-110-1000T 110V robust convector heater ideal for site huts CONVECTION HEATERS Features Robust steel construction with central baffle plate to promote convection currents Long life metal sheathed finned heating element Auto-reset over-temperature protection Built-in thermostat with external knob allowing easy adjustment of temperature set-point Price Model List Price BLS-110-1000T 155.00 Heater Technical Data kw Volts Dimensions (mm) Weight (kg) L D H 1.0 110 1206 62 148 6.0 We have a heater for almost every heating application Please call our technical sales team for help with heater selection web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 43

BLC Pew Heaters BLC-300 CONVECTION HEATERS BLC-500 BLC-750 BLC Series - ideal for unobtrusive installation under a church pew An economic means of heating a church congregation Minimal pre-heating required ensuring low running costs Visually unobtrusive Features Robust all-steel construction Dark brown paint finish Fixed directly to a pew s backboard or mounted on floor or suspension brackets Cable knockouts at both ends for electrical connection Optional guards available Heater Range and Prices Model Length (mm) kw List Price BLC-300 566 0.3 85.00 BLC-500 691 0.5 89.00 BLC-750 945 0.75 99.00 Heater Technical Data Model kw Volts Dimensions (mm) Weight (kg) L D H BLC-300 0.3 230 566 62 148 3.0 BLC-500 0.5 230 691 62 148 4.0 BLC-750 0.75 230 945 62 148 5.0 BLC-EXG6 optional safety guard can be retro-fitted BLC-HB optional suspension brackets for BLC range BLC with guard installed under a choir stall in a Somerset church BLC-FB Floor Mounting Brackets - For use where pews do not have a conventional back-board 44 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Optional Accessories and Prices Type Description Model List Price Guard For BLC-300 610 x 135 x 160 BLC-EXG6 21.00 Guard For BLC-500 740 x 135 x 160 BLC-EXG7 23.00 Guard For BLC-750 1020 x 135 x 160 BLC-EXG10 25.00 Bracket Floor (pair) assembled height 153mm BLC-FB 20.00 Bracket Suspension (pair) assembled height 234mm BLC-HB 17.00 Pew Heater Section Table Space Between Seat Supports (mm) Minimum Maximum Recommended Heater 650 750 BLC-300 750 1000 BLC-500 1000 1500 BLC-750 1500+ Multiple Heaters Spaces between seat supports CONVECTION HEATERS Pew heaters installed in a Worcestershire church BLC heaters installed under pews in St Bartholomew s Church Notgrove Pew heaters with suspension brackets and guards web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 45

SWD Industrial Finned Tubular Heaters CONVECTION HEATERS Ideal for damp and corrosive environments Suitable for hose-down washing Designed for long life in the most demanding conditions Features Welded stainless steel construction SWD Industrial Finned Tubular Built-in adjustable thermostat (SWD-A models only) Heater ideal for damp and Brackets for wall or floor mounting supplied as standard corrosive environments Waterproof glass fibre terminal box IP66 rated M20 cable gland supplied as standard Optional zinc plated wire guards available (recommended when personnel have access to the heater) Heater Range and Prices Model kw Volts Built-in Thermostat List Price SWD-A-500 0.5 230V Yes 346.00 SWD-A-1000 1.0 230V Yes 410.00 SWD-A-1500 1.5 230V Yes 485.00 SWD-A-2000 2.0 230V Yes 524.00 SWD-A-3000 3.0 230V Yes 674.00 SWD-U-500 0.5 230V No 257.00 SWD-U-1000 1.0 230V or 400V/3 No 316.00 SWD-U-1500 1.5 230V or 400V/3 No 369.00 SWD-U-2000 2.0 230V or 400V/3 No 432.00 SWD-U-3000 3.0 230V or 400V/3 No 590.00 SWD-U-4000 4.0 230V or 400V/3 No 804.00 SWD-U-500-1 0.5 110V No 277.00 SWD-U-1000-1 1.0 110V No 342.00 SWD-U-1500-1 1.5 110V No 393.00 SWD-A with externally adjustable thermostat Heater Technical Data kw Dimensions (mm) Weight (kg) Optional L W H Guard 0.5 440 130 170 3.0 SWG-1 1.0 640 130 170 4.8 SWG-2 1.5 840 130 170 6.2 SWG-3 2.0 1040 130 170 7.7 SWG-3 3.0 1440 130 170 10.9 SWG-4 4.0 1840 130 170 13.7 SWG-5 SWD-U standard format 46 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Optional Guard Range and Prices Model List Price SWG-1 62.00 SWG-2 70.00 SWG-3 82.00 SWG-4 132.00 SWG-5 137.00 Optional Guard Technical Data Model Dimensions (mm) Weight L W H (kg) SWG-1 450 240 240 1.0 SWG-2 650 240 240 1.5 SWG-3 1075 240 240 2.0 SWG-4 1600 240 240 3.5 SWG-5 1900 240 240 4.0 SWD mounted under SWG Guard An SWD guard is recommended when personnel have access to the heaters CONVECTION HEATERS SWD heaters can be floor mounted or wall mounted using the brackets provided web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 47

TX Explosion-Proof Tubular Heaters CONVECTION HEATERS ATEX Certified for use in Hazardous Areas Suitable for Zone 1 and Zone 2 areas (gas) and Zone 21 and Zone 22 areas (dusts) Typical applications Spray shops Petrochemical installations Storage areas where hazardous gases or dusts may be present Features ATEX Certified Equipment protection level Gb (gas) and Db (dust) Certified for Zones 1, 2, 21 and 22 Groups IIC (gas) and IIIC (dust) Temperature Class T3 (maximum ambient 40 C) IP66 rating Steel construction with grey epoxy finish Sturdy mounting feet for wall or floor mounting Optional galvanised steel mesh safety guard Also available (consult BN Thermic) T4 models Alternative outputs up to 2.4kW Alternative voltages including 3 phase Low and high ambient temperature models Stainless steel construction Heater Range and Prices Model kw List Price TXT3-04 0.4 1135.00 TXT3-05* 0.5 1161.00 TXT3-10* 1.0 1260.00 TXT3-15* 1.5 1340.00 TXT3-20 2.0 1455.00 TXST-01 ATEX approved thermostat for use with hazardous gases *Generally available from stock 48 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Heater Specifications Model kw Dimensions (mm) Weight Optional Guard L H W (kg) TXT3-04 0.4 650 157 100 10.0 TXG-01 TXT3-05* 0.5 850 157 100 11.5 TXG-01 TXT3-10* 1.0 1450 157 100 16.0 TXG-02 TXT3-15* 1.5 2050 157 100 19.5 TXG-01 + TXG-02 TXT3-20 2.0 2650 157 100 24.5 2 x TXG-02 Guards TXG guards are recommended for installations where personnel have access to heaters. The guards are open ended allowing more than one guard to be used to protect a single heater. Guards Model Length List Price TXG-01 730mm 46.00 TXG-02 1330mm 55.00 Thermostat Options and Prices CONVECTION HEATERS Description Model Details List Price ATEX thermostat (hazardous gas only) ATEX thermostat (hazardous dust and gas) TXST-01 Page 74 459.00 TXST-02 Page 74 842.00 TXST-02 ATEX approved thermostat for use with hazardous gases and dusts TX ATEX approved heaters installed in a hazardous area web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 49

ETH Terrace Heaters RADIANT HEATERS Provides comfort heat in indoor and outdoor areas Ideally suited to outdoor sheltered locations Can be installed outdoors and left outdoors all year round Typical Applications Commercial and domestic installations Dining areas Pavement cafes Balconies Conservatories ETH Terrace Heater smart modern design Features Sophisticated all black design IP44 rated for outdoor use equally suited to indoor applications Radiant heat with no light output Wall mounting bracket with up and down angle adjustment supplied as standard Suitable for suspension Pre-wired 2m high temperature cable Heater Range and Prices Model kw List Price ETH-10 1.0 264.00 ETH-15 1.5 309.00 ETH Terrace heaters are ideal for suspension above dining areas Technical Specification Model kw Volts Dimensions(mm) Weight (kg) H W D ETH-10 1.0kw 230 140 1080 45 4.0 ETH-15 1.5kW 230 140 1580 45 6.0 Control Options and Prices Description Model Details List Price Push Button Timer (3kW max) TS-6 Page 76 87.00 Push Button Timer (6kW max) TS-5 Page 76 142.00 Terrace heaters installed indoors in a Norfolk sports club 50 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

ETH Terrace Heaters Optional Multi-Heater Brackets Description Model List Price Brackets for 2 heaters (suspend or wall-mount) ETH-B2 67.00 Brackets for 3 heaters (suspend or wall mount) ETH-B3 90.00 Brackets for suspending or wall-mounting 2 and 3 heaters RADIANT HEATERS Two Terrace heaters suspended using a ETH-B2 bracket in a sheltered dining area Terrace heaters mounted above a bar in London's Waterloo Station web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 51

HWP2 Patio Heater RADIANT HEATERS Safe, instant outdoor heating Equally suitable for commercial or domestic installations Can be installed outdoors and left outdoors all year round Typical Applications Patios both commercial and domestic Pub gardens Pavement cafes Golf driving ranges Nightclub queuing areas Smoking areas Features IP55 rated for outdoor use equally suited to indoor applications Aluminium construction with stainless steel safety grille Stylish design with choice of black, white or silver paint finish High quality replaceable halogen lamp with an average 7000 hours operating life Wall mounting bracket with up and down angle adjustment supplied as standard Parasol clamp supplied as standard with single lamp heaters Suitable for suspension Pre-wired 3m high temperature cable HWP2-B HWP2-S HWP2-W HWP2-2B HWP2-2W HWP2-3B HWP2-3W HWP2-45B Heaters mounted on HWP2-ARM for parasols with a centre flange 2kW patio heaters keeping golfers warm at a driving range 52 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Optional Accessories and Prices Description Model Details List Price Dimmer (3kW max) VR-2 Page 79 109.00 Push Button Timer TS-6 Page 76 87.00 (3kW max) Push Button Timer TS-5 Page 76 142.00 (6kW max) Movement Sensor WH-402 Page 78 87.00 Parasol arm (670mm) HWP2-ARM ----- 51.00 A 3kW heater suspended A Battersea bistro providing a warm outdoor dining area RADIANT HEATERS Heater Range and Prices Model kw Finish Lamp Glow List Price HWP2-B 1.5 Black Gold 138.00 HWP2-BM 1.5 Black Magic Lamp (See page 55) 189.00 HWP2-W 1.5 White Gold 138.00 HWP2-WM 1.5 White Magic Lamp (See page 55) 189.00 HWP2-S 1.5 Silver Gold 138.00 HWP2-SM 1.5 Silver Magic Lamp (See page 55) 189.00 HWP2-2B 2.0 Black Red 169.00 HWP2-2W 2.0 White Red 169.00 HWP2-3B 3.0 Black Red 247.00 HWP2-3W 3.0 White Red 247.00 HWP2-45B 4.5 Black Red 353.00 HWP2 Heaters now available in FORMAT All the performance of a true halogen heater but with the gentlest pink glow. See page 55 for full details. web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 53

HWP2 Patio Heaters Continued Area Coverage Wall mounted Wall Mounted kw H (m) X (m) Y (m) Z (m) Area (m²) 1.5 or 2kW 2.0 2.3 2.4 4.0 7.6 1.5 or 2kW 2.5 3.0 3.0 5.2 12.3 3.0 2.0 3.4 2.4 4.5 9.5 3.0 2.5 4.2 3.0 5.8 15.0 4.5 2.0 4.3 2.4 5.0 11.2 4.5 2.5 4.8 3.0 6.4 16.8 H Y X Z RADIANT HEATERS Area Coverage Overhead Mounted kw H (m) X (m) Y (m) Area (m²) 1.5 or 2kW 2.0 3.6 2.5 9.0 1.5 or 2kW 2.5 4.8 3.5 16.8 3.0 2.0 4.3 2.5 10.7 3.0 2.5 5.2 3.5 18.2 4.5 2.0 4.8 2.5 12.0 4.5 2.5 5.6 3.5 19.6 HWP2-S heaters providing instant heat in the smartest-looking smoking area we have ever seen! H Overhead mounted Technical Specification kw Volts Lamp Type Glow Dimensions(mm) Weight (kg) H W D 1.5kw 230 Frosted* Gold* 120 480 140 1.7 2kW 230 Gold Red 120 480 140 1.7 3kW 230 Gold Red 120 960 140 3.2 4.5kW 230/400 Gold Red 120 1440 140 4.9 * available in 'Magic Lamp' format (see page 55). Y X HWP2 outside a Mexican steak house Instant heat all year round for East London hipsters! 54 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Magic Lamp Introducing the REVOLUTIONARY... BN Thermic halogen heaters and patio heaters are now available with the brand-new Magic Lamp. These heaters are true shortwave halogen heaters, and will perform as such, but produce a barely perceptible pink glow. RADIANT HEATERS Magic Lamp heaters are perfect for any installation which requires instant, direct heat but where significant light output cannot the tolerated. Typical applications: Churches Dining areas Sports facilities Show rooms Studios Animal enclosures Light output from a conventional halogen heater Magic Lamp Patio Heaters can be seen on page 52 Gentle pink glow from a Magic Lamp Magic Lamp Halogen Heaters can be seen on page 56 Heaters using the Magic Lamp should not be confused with medium-wave low glow heaters. Magic lamp heaters emit shortwave energy which can travel several metres without losing intensity or being affected by draughts and breezes. web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 55

HN Series Halogen Heaters Heats people rather than space Ideal for heating specific targets within an otherwise unheated building Instantly effective and therefore ideal for infrequently used buildings RADIANT HEATERS HN2-1500G or HN2-200G Halogen Heater Typical Applications Community halls Churches Workshops Packing areas Squash courts Factories Warehouses HN Heaters now available in FORMAT All the performance of a true halogen heater but with the gentlest pink glow. See page 55 for full details. Features Aluminium construction with safety grille HN2-3000G Halogen Heater High quality replaceable halogen lamp with an average 7000 hours operating life Wall mounting bracket with up and down and side to side' angle adjustment Gold lamp with pink/orange glow Pre-wired 1m high temperature cable (2 core and earth) Lamps on 2 and 3 lamp heaters can be switched individually using remote mounted switch Optional suspension kit available HN2-4500G or HN2-6000G Halogen Heater Rear view of HN2-3000G showing wall bracket and terminal enclosure 56 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Heater Range and Prices Model kw List Price HN2-1500G 1.5 155.00 HN2-1500M 1.5 200.00 HN2-2000G 2.0 165.00 HN2-3000G 3.0 240.00 HN2-3000M 3.0 320.00 HN2-4500G 4.5 388.00 HN2-4500M 4.5 490.00 HN2-6000G 6.0 435.00 Heaters with a 'G' suffix have gold (red glow) lamps. Heaters with 'M' suffix have Magic Lamps with an almost imperceptible pink glow (see page 55) Technical Specification kw Volts Dimensions(mm) Weight (kg) H W D 1.5kw/2kW 230 275 420 140 3.8 3kW 230 430 420 140 5.5 4.5kW/6kW 230/400 590 420 140 6.5 2kW halogen heaters spot heating a packing area in a warehouse RADIANT HEATERS HN2-3000G shortwave heaters providing instant economical heating in St Stephen s Church Barnet Four 6kW halogen heaters installed in a dance studio HN Halogen Heater heating the chancel in a Somerset Church Continued... web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 57

HN Halogen Heaters Continued Wall Mounted H Table 1 - Select appropriate W/m² W/m required X Heavy Work Light Work Spot Heating Y Z Highly Insulated 150 200 250 Insulated 175 225 250 RADIANT HEATERS Un-Insulated 200 250 275 Light Cladding 250 300 300 Badly insulated/damp 300 300 300 Table 2 - Select heater type and mounting height HN2-1500G or HN2-2000G HN2-3000G HN2-4500G or HN2-6000G Wall Mounted (m) Area Covered Overhead Mounted (m) Area Covered H X Y Z (m²) H X Y (m²) 2.5 3.2 2.6 6.0 11.9 3.0 3.0 2.0 6.0 3.0 3.4 3.6 6.7 18.2 3.5 3.3 2.3 7.6 3.0 3.7 3.6 7.0 19.2 3.5 3.3 2.6 8.6 3.5 4.0 4.2 7.9 25.0 4.0 5.0 3.1 15.5 3.5 4.0 4.2 8.1 25.4 4.0 5.0 3.4 17.0 4.0 4.3 4.5 8.4 28.6 5.0 5.3 3.7 19.6 H Y X Overhead Mounted Optional Accessories Description Model Full Details List Price Suspension Kit HSK ---- 5.00 On/off switch for 1.5kW, 2kW CS-4 Page 77 38.00 and 3kW heaters Switch for 3kW heater: CS-2 Page 77 50.00 full/½ heat settings Switch for 4.5kW and 6kW CS-3 Page 77 69.00 heaters: full/⅔/⅓ heat settings Dimmer (3kW max) VR-2 Page 79 109.00 Push Button Timer (3kW max) TS-6 Page 76 87.00 Push Button Timer (6kW max) TS-5 Page 76 142.00 Movement Sensor (3kW max) WH-402 Page 78 87.00 4.5kW Halogen Heater providing instant controllable heat in a car valeting tent For multi-heater control see page 59-60 58 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

MC1 Halogen Heater Control Box An MC1 control box provides variable output control for a group of BN Thermic s HN2 halogen heaters from a single point. This approach allows the intensity of heat to be adjusted by means of a simple wall-mounted switch enhancing comfort and improving economy. Each system must incorporate one primary control box and a wall-mounted switch (either CS-2 or CS-3 depending on the heaters being controlled). For larger installations additional secondary control boxes (MC1-S) will be required. Control Box Range and Prices Model Primary/ Secondary Halogen Heaters Controlled Max No. Heaters List Price MC1-P-L2 Primary 2 lamp 6 611.00 MC1-S-L2 Secondary 2 lamp 6 547.00 MC1-P Primary 3 lamp 4 611.00 MC1-S Secondary 3 lamp 4 547.00 Switch Range and Prices Model Suitable for Details List Price CS-2 MC1-P-L2 Page 77 50.00 CS-3 MC1-P Page 77 69.00 RADIANT HEATERS Controlling HN2-3000G (3kW) Heaters each with 2 lamps Each MC1-P-L2 will control up to six heaters. The CS-2 switch allows the heaters lamps to be switched individually meaning that outputs of 1.5kW or 3kW can be selected. CS-2 Wall Mounted Switch MC1-P-L2 MC1-S-L2 Primary Control Box controlling up to six heaters Secondary Control Box each controlling up to six heaters A selection of optional additional control devices WH-402 Movement Sensor CS-5 Push Button (activates rundown timer) CS-6 Master Control Button For larger installations up to eleven secondary control boxes can be connected in a control daisy chain with each controlling up to six additional heaters. FST2-IN Frost Thermostat Continued... web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 59

MC1 Halogen Heater Control Box Continued Controlling HN2-4500G (4.5kW) Heaters or HN2-6000G (6kW) Heaters each with 3 lamps Each MC1-P will control up to four heaters. The CS-3 switch allows the heaters lamps to be switched individually meaning that outputs of 1/3, 2/3 or full power can be selected. RADIANT HEATERS CS-3 Wall Mounted Switch MC1-P Primary Control Box controlling up to four heaters MC1-S Secondary Control Box each controlling up to four heaters WH-402 Movement Sensor A selection of optional additional control devices CS-5 Push Button (activates rundown timer) CS-6 Master Control Button FST2-IN Frost Thermostat For larger installations up to eleven secondary control boxes can be connected in a control daisy chain with each controlling up to four additional heaters. Two MC-1 control boxes providing variable heat control in a Norfolk church Optional additional control devices and prices Type Description Model Details List Price Thermostat Frost protection overrides switch and other control FST2-IN Page 72 68.00 devices Thermostat Prevents heaters being energised above set-point RST2-IN Page 72 74.00 (standard model) Thermostat Prevents heaters being energised above set-point RST-TP Page 71 80.00 (tamperproof model) Timer Programmable timer PROTIM-7 Page 76 114.00 Movement Sensor Prevents unoccupied area from being heated WH-402 Page 78 87.00 Push Button Triggers control boxes built-in run down timer (preset CS-5 Page 78 37.00 between 5 secs and 18 minutes) Master Control Button Switches the system off overriding everything but frost thermostat CS-6 Page 78 39.00 60 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

ESP Radiant Cassettes An extremely economic means of heating large commercial spaces Attractive unobtrusive design well suited to modern facilities High mounting positions allows flexible use of floor and wall space Typical Applications Community halls Sports halls Showrooms Food Halls Squash courts Features Radiant heat without light output Robust steel case with white epoxy finish Specially treated aluminium heat emitter Ceiling mounting brackets supplied as standard (these brackets also provide suspension points) Optional angle adjustable wall brackets available The ESP range providing an economic means of heating large areas Radiant cassettes are ideally suited to squash courts Heater Range and Prices Model kw List Price ESP2-09 0.9 268.00 ESP2-12 1.2 275.00 ESP2-18 1.8 379.00 ESP2-24 2.4 400.00 ESP2-30 3.0 537.00 ESP2-36 3.6 542.00 ESP2C-06 0.6 297.00 ESP2C-08 0.85 310.00 ESP2-B (optional wall bracket - pair) 30.00 RADIANT HEATERS Wall mounted cassettes using ESP2-B brackets Continued... ESP2 cassettes suspended from the ceiling in a garden centre web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 61

RADIANT HEATERS ESP Radiant Cassettes Continued Energy Saving ESP Radiant Cassettes are our most economic heaters for buildings with high roofs for the following reasons: The gentle radiant effect means that the experienced temperature can be up to 4 C warmer than the actual air temperature. This means that the thermostat can be set up to 4 C lower. The temperature gradient is negligible. Typically air temperature will increase by 0.3 C per metre above floor level. This figure compares to a typical 2.5 C per metre when using fan heaters. Height above floor level Approx Air Temp 6m 18.5 C 5m 18.2 C 4m 17.9 C 3m 17.6 C 2m 17.3 C 1m 17 C Heating a building using ESP Radiant Cassettes Height above floor level Approx Air Temp 6m 32.5 C 5m 30 C 4m 27.5 C 3m 25 C 2m 22.5 C 1m 20 C Heating a large building using fan heaters Energy saving heating in a Brighton theatre Ceiling mounted radiant cassettes allowing flexible use of space in a village hall 62 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

ESP2 radiant cassettes are ideal for modern industrial applications such as this glass-printing shop RADIANT HEATERS Technical Specification Model kw Volts Dimensions(mm) Recommended Mounting Height (m) Weight H W D Min Max (kg) ESP2-09 0.9 230 60 1550 150 3.0 8.0 5.8 ESP2-12 1.2 230 60 1550 150 3.0 8.0 5.8 ESP2-18 1.8 230 60 1550 250 3.5 8.0 9.9 ESP2-24 2.4 230 60 1550 250 3.5 8.0 9.9 ESP2-30 3.0 230/400 60 1550 350 3.5 8.0 13.9 ESP2-36 3.6 230/400 60 1550 350 3.5 8.0 13.9 ESP2C-06 0.6 230 60 650 250 3.0 8.0 5.5 ESP2C-08 0.85 230 60 650 250 3.0 8.0 5.5 Control Options and Prices Type Description Model Details List Price Thermostat Hard Case tamperproof HC-T2 Page 73 161.00 Thermostat Hard Case tamperproof with temperature set-back HC-ST2 Page 73 190.00 Thermostat Tamperproof tool for Hard Case thermostats HC-D Page 73 22.00 Timer Programmable PROTIM-7 Page 76 114.00 Contactor 32A 3-pole CON-32 Page 79 34.00 Contactor 50A 3-pole CON-50 Page 79 45.00 Contactor 80A 3-pole CON-80 Page 79 86.00 Contactor Enclosure for CON-32 and CON-50 ENCL-D Page 79 18.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 63

RP Radiant Ceiling Panels RADIANT HEATERS A sophisticated means of heating commercial premises Very safe as personnel have no access to heaters High mounting positions allows flexible use of floor and wall space Typical Applications Offices Trade counters Care homes Meeting rooms Features Radiant heat without light output Specifically designed for quick and easy installation into a suspended ceiling grid Fitted with a bracket for easy mounting onto a conventional ceiling Attractive white easy-clean finish Mounting height up to 4m RP-03 provides an almost invisible source of gentle radiant heat Energy Saving RP Ceiling Panels are a more economic means of heating commercial premises than conventional heating systems. The gentle radiant effect means that the experienced temperature can be up to 4 C warmer than the actual air temperature. This means that the thermostat can be set up to 4 C lower. The temperature gradient is negligible. Typically air temperature will increase by 0.3 C per metre above floor level. This figure compares to a typical 2.5 C per metre when using fan heaters. Heater Range and Prices Model kw List Price RP-03 0.3 150.00 RP-06 0.6 206.00 Technical Specification Model kw Volts Dimensions(mm) Weight H W D (kg) RP-03 0.3 230 25 595 595 5 RP-06 0.6 230 25 1195 595 10 RP radiant panels in a changing room making best use of available space 64 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

RADIANT HEATERS RP radiant panels ceiling mounted in a cricket pavilion RP-06 radiant panels providing an economic and stylish means of heating a flying school in Sussex 300W panels integrated into a suspended ceiling grid Control Options and Prices Type Description Model Details List Price Thermostat Standard RST2-IN Page 72 74.00 Thermostat Tamperproof RST-TP Page 71 80.00 Thermostat Programmable PROSTAT-7 Page 71 93.00 Timer Programmable PROTIM-7 Page 76 114.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 65

CH Ceramic Heaters Heats people rather than space Direct radiant heating without light output Virtually instant heat ideally suited to irregularly used premises RADIANT HEATERS Typical Applications Community halls Workshops Kennels Zoos Features Aluminium construction with safety grille Long life no glow ceramic heat emitters Wall mounting bracket with up and down and side to side' angle adjustment 1m high temperature cable CH-3000 3kW Ceramic Heater providing directional radiant heat without light output CH-1500 1.5kW Ceramic Heater a few minutes after switching on Heater Range and Prices Model kw List Price CH-1500 1.5 139.00 CH-3000 3.0 238.00 Technical Specification kw Volts Dimensions(mm) Weight (kg) H W D 1.5kw 230 190 405 72 1.8 3kW 230 345 405 72 2.8 A 3kW ceramic heater provides localised heating for visitors to a London craft centre 66 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Control Options and Prices Description Model Details List Price Dimmer (3kW max) VR-2 Page 79 109.00 Push Button Timer TS-6 Page 76 87.00 Movement Sensor WH-402 Page 78 87.00 Spot the Iguana! RADIANT HEATERS CH-1500 Ceramic heater providing warmth in a fisherman's cafe Ceramic heater keeping a flower seller warm at a London station web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 67

RL Replacement Infrared Lamps RADIANT HEATERS A range of shortwave quartz halogen heat lamps to suit almost all available heaters from a variety of manufacturers. Lamps with flexible leads and SK15 caps Used in a variety of open fronted commercial and industrial heaters. Average lamp life 7000 hours Colour options Ruby Gold Silver (Magic Lamp) Fork terminal Push fit terminal Model kw Voltage Colour Lamp length (mm) Lead length (mm) Terminal List Price RL10RF 1 230 Ruby 346 230 Fork 51.00 RL10GF 1 230 Gold 353 230 Fork 51.00 RL15RF 1.5 230 Ruby 346 230 Fork 51.00 RL15GF 1.5 230 Gold 353 230 Fork 54.00 RL15MF 1.5 230 Silver 353 230 Fork 94.00 RL15RF/1 1.5 120 Ruby 346 230 Fork 51.00 RL15RP 1.5 230 Ruby 346 440 Push Fit 56.00 RL15GP 1.5 230 Gold 346 440 Push Fit 51.00 RL15GH 1.5 230 Gold 353 230 Fork 51.00 RL20RF 2 230 Ruby 346 230 Fork 51.00 RL20GF 2 230 Gold 353 230 Fork 51.00 Weatherproof (IP55) lamps with flexible leads Generally used in open fronted patio heaters. Average lamp life 7000 hours Lead length Lamp length Lamp length Colour options Clear Gold Silver (Magic Lamp) Lead length Model kw Voltage Colour Lamp length (mm) Lead length (mm) Terminal List Price RL15CW 1.5 230 Frosted 440 375 Plain Ferrule 39.00 RL15GW 1.5 230 Gold 440 375 Plain Ferrule 51.00 RL15MW 1.5 230 Silver 440 375 Plain Ferrule 96.00 RL15GW/3 1.5 230 Gold 440 200 & 600 Plain Ferrule 51.00 RL15GW/4 1.5 230 Gold 440 430 & 905 Plain Ferrule 51.00 RL20GW 2 230 Gold 440 375 Plain Ferrule 55.00 Spare Lamps for BN Thermic Heaters Heater HWP2-B/W/S HWP2-2B/W HWP2-3B/W HWP2-45B HN2-1500G HN2-2000G HN2-3000G HN2-4500G HN2-6000G HB-1500 Lamp RL15CW RL20GW RL15GW/3 RL15GW (centre lamp) RL15GW/4 (outside lamps) RL15GF RL20GF RL15GF RL15GF RL20GF RL15GH Lamps with R7s caps Generally used in glass fronted patio heaters. This lamp is used with spring loaded fittings. Average lamp life 3000 hours in glass fronted heaters. Lamp length Model kw Voltage Colour Lamp length List Price (mm) RL13GS 1.3 230 Gold 254 44.00 68 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

CONTROLS Thermostats A16C - Manual thermostat Application Underfloor heating Adjustable Range +5 C to +30 C (manual adjustment) Mounting Recessed into a single-gang back box Sensors Integral air sensor with floor sensor supplied as standard Switching capacity 15A 230V Voltage supply 230V Contacts Single pole, single throw Dimensions 82mm (H) x 78mm (W) x 17mm (D) - when installed Ingress protection IP20 Special features Manual on/off switch Can be configured for air and floor sensor or floor sensor only List Price 70.00 U16C - Programmable thermostat Application Adjustable Range Mounting Programming Periods Sensors Switching capacity Voltage supply Contacts Dimensions Ingress protection Special Features Underfloor heating +5 C to +30 C Recessed into a single-gang back box 7-day/4 per day Integral air sensor with floor sensor supplied as standard 15A 230V 230V Single pole, single throw 82mm (H) x 78mm (W) x 17mm (D) - when installed IP20 Can be configured for air and floor sensor or floor sensor only Back-lit screen Summer switch (switches off heating but retains programme) List Price 80.00 CONTROLS T16R optional IP65 air sensor T16C - Touchscreen programmable thermostat Application Adjustable Range Mounting Programming Periods Sensors Switching capacity Voltage supply Contacts Dimensions Ingress protection Special Features Underfloor heating +5 C to +34 C Recessed into a single-gang back box 7-day with no restriction of number of events per day Integral air sensor with floor sensor supplied as standard 16A 230V 230V Single pole, single throw 90mm (H) x 90mm (W) x 18mm (D) - when installed IP21 Available in white, black or silver Can be configured for air and floor sensor or floor sensor only Screen colour can be changed Built-in energy use monitor Can be used with remote, wall mounted air sensor model T16R (IP65) List Prices T16CW (white): 102.00 T16CB (black): 107.00 T16CS (silver): 107.00 T16R (optional remote air sensor): 14.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 69

CONTROLS Thermostats - Continued S16C Smart Thermostat CONTROLS Application App Enabled Adjustable Range Mounting Programmed Periods Sensors Switching Capacity Contacts Ingress protection Dimensions Finish Special Feature Underfloor heating and general space heating Android (4.0 or later) and ios (8.0 or later) +5 C to +35 C Recessed into a single-gang black box 5+1+1 days/6 per day Integral air sensor with floor sensor supplied as standard 16A 230V Single pole single-throw IP30 86mm (H) x 130mm (W) x 18mm (D) - when installed S16CW choice of white or brushed chrome S16CB choice of black or black with chrome detail Adjustable screen brightness Automatic screen dimming with adjustable timing List price S16CW (white/chrome): 199.00 S16CB (black): 199.00 WST-1 - Wireless thermostat Application Underfloor heating and general commercial and domestic heating Use with WSB-1 relay boxes Adjustable Range +5 C to +37 C Mounting Surface mount or rest on stand provided Programming Periods Weekly in 30 minute periods Sensor Integral air sensor Voltage supply 2 x AAA batteries (provided) Number of WSB-1 relay 4 maximum boxes controlled Ingress protection IP30 Special Features Keyboard lock function Low battery indication Frost protection (holiday) mode Temporary override when used with WSP-1 wireless central programmer List Price 91.00 WSB-1 - Wireless relay box Application Use with Mounting Sensor Switching capacity Voltage supply Contacts Dimensions Ingress Protection Special features Underfloor heating and general commercial and domestic heating WST-1 wireless thermostat Recessed into a single-gang back box Floor probe (when used with underfloor heating) 16A 230V 230V List Price 85.00 Single pole, single throw 90mm (H) x 90mm (W) x 24mm (D) - when installed IP20 (see special features) Ingress protecting improved to IP21 when clip provided is fitted 70 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

WSP-1 - Wireless central programmer Application Underfloor heating and general commercial and domestic heating Use with WST-1 wireless thermostat and WSB-1 wireless relay boxes Adjustable Range +5 C to +37 C Mounting Recessed into a single-gang back box Programming Periods 7-day with no restriction of number of events per day Voltage supply 230V Dimensions 90mm (H) x 90mm (W) x 18mm (D) - when installed Number of heating 24 maximum zones controlled Ingress protection IP21 Special Features Individual zones (rooms) can be renamed and numbered Frost protection (holiday) mode Energy use monitor List price 194.00 PROSTAT-7 - Programmable thermostat Application Programmable temperature control in commercial premises Adjustable Range +5 C to +30 C Mounting Surface Switching capacity 6A 230V Voltage supply 3 x AA batteries (supplied) Contacts Single pole, change over Dimensions 142mm x 71mm x 30mm Ingress protection IP30 Special features Battery life in excess of 2 years Up to 6 programmable events per day Temporary temperature override until next pre-set period Temperature lock permanent temperature override until reset List price 93.00 CONTROLS RST-TP - Tamperproof thermostat Application Commercial heating Adjustable Range +5 C to +25 C Mounting Surface Switching capacity 20A 230V Voltage supply 230V Contacts Single pole, single throw Dimensions 85mm x 85mm x 35mm Ingress protection IP30 Special features Concealed temperature adjustment Optional shear-off cover fixing screws Heat anticipator improves control accuracy List price 80.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 71

RST2-IN - Standard room thermostat Application Commercial heating Adjustable Range +5 C to +30 C Mounting Surface Switching capacity 20A 230V Voltage supply 230V Contacts Single pole, change over Dimensions 85mm x 85mm x 35mm Ingress protection IP30 Special features Heat anticipator improves control accuracy Price 74.00 CONTROLS RST-EX - IP54 Thermostat Application Industrial heating in damp conditions Adjustable Range +5 C to +35 C Mounting Surface Switching capacity 15A 230V Voltage supply None required Contacts Single pole, change over Dimensions 105mm x 105mm x 60mm Ingress protection IP54 List price 76.00 FST2-IN - Frost thermostat (indoor) Application Frost protection Adjustable Range -15 C to +10 C Mounting Surface Switching capacity 20A 230V Voltage supply 230V Contacts Single pole, change over Dimensions 85mm x 85mm x 35mm Ingress protection IP30 Special features Heat anticipator improves control accuracy List price 68.00 FST2-EX - Frost thermostat (outdoor) Application Frost protection Adjustable Range -15 C to +10 C Mounting Surface Switching capacity 20A 230V Voltage supply 230V Contacts Single pole, change over Dimensions 125mm x 125mm x 75mm Ingress protection IP65 Special features Heat anticipator improves control accuracy List Price 129.00 72 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

HC-T2 - Hard Case thermostat Application Heating control in industrial and public areas Adjustable range 12 C to 25 C (comfort) 0 C to 12 C (frost protection) Use internal dip switch to select range Differential Adjustable 0.25 C to 5 C Accuracy To within +/- 0.5 C Mounting Surface Switching capacity 16A 230V Voltage supply 230V Contacts Single pole, changeover Dimensions 120mm x 95mm x 57mm Case Die-cast aluminium Sensor Side mounted black sensor (option of IP55 rated remote mounted sensor HC-S2) Thermostat ingress protection IP30 when installed Special features Tamperproof design requiring HC-D tool to access Vandal resistant List prices Thermostat (HC-T2): 161.00 Tamperproof tool (HC-D): 22.00 Optional remote sensor (HC-S2): 43.00 CONTROLS HC-ST2 - Hard Case thermostat with set-back HC-S2 optional IP55 remote mounted air sensor HC-D tamperproof tool Application Heating control in industrial and public areas Adjustable range 12 C to 25 C (comfort) Adjustable set-back Up to 20 C below comfort setting Indication Set-back operation: Blue LED (default mode) Comfort operation: red LED Comfort selection Side mounted button activating built-in run-down timer (adjustable up to 7.5 hours) OR Remote device such as PROTIM-7 programmable timer Differential Adjustable 0.25 C to 5 C Accuracy To within +/- 0.5 C Mounting Surface Switching capacity 16A 230V Voltage supply 230V Contacts Single pole, changeover Dimensions 120mm x 95mm x 57mm Case Die-cast aluminium Sensor Side mounted black sensor (option of IP55 rated remote mounted sensor HC-S2) Thermostat ingress protection IP30 when installed Special features Tamperproof design requiring HC-D tool to access Vandal resistant List prices Thermostat (HC-ST2): 190.00 Tamperproof tool (HC-D): 22.00 Optional remote sensor (HC-S2): 43.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 73

CONTROLS Thermostats - Continued TXST-01 - ATEX Thermostat (hazardous gases only) CONTROLS Approval ATEX Equipment Protection Level Gb (gas) Zones Zones 1 and 2 (gas) Group Group IIC Temperature Class T6 Adjustable Range 0 to 40 C Differential 4 C (+/- 2 C) Temperature Sensing Bulb and Capillary (stainless steel) Cable Entries 2 x M20 Enclosure Material Cast aluminium with black anodised finish Mounting plate material Powder coated steel Switching Capacity 16A 230V resistive load Contacts Single pole double throw (changeover) Ingress protection IP66 Dimensions 210mm (w) x 300mm (h) x 91mm (d) Weight 5kg List Price 459.00 TXST-02 - ATEX Thermostat (hazardous gases and dusts) Approval ATEX Equipment Protection Level Gb (gas) Db (dust) Zones Zones 1 and 2 (gas) Zones 21 and 22 (dust) Group Group IIC (gas) Group IIIC (dust) Temperature Class T6 Adjustable Range -20 to 40 C Temperature Sensing Stainless steel 316Ti capillary Cable Entries 2 x M20 Certified Cable Glands M20 x 1.5 with clamping range Ø 6-13mm M20 x 1.5 with clamping range Ø 7-17mm Enclosure Material Black polyester Switching Capacity 16A 230V resistive load (break on rise/heating) 6A 230V resistive load (make on rise/cooling) Contacts Single pole double throw (changeover) Ingress protection IP65 Dimensions 200mm (w) x 106mm (h) x 90mm (d) Weight 1.2kg List price 842.00 74 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

ERC-T1 - Snow and ice melting controller and sensor Application Adjustable range Adjustable run-on time Mounting Switching capacity Voltage supply Contacts Thermostat dimensions Thermostat ingress protection Ground Sensor Sensor dimensions Sensor ingress protection Special features Controlling snow and ice melting mats 0 C to +10 C 0 to 5 hours DIN-rail 16A 230V 230V Single pole, single throw 86mm x 52mm x 59mm IP20 Detecting temperature and moisture 60mm dia x 32mm with 10m cable IP68 LED indicators: power on, moisture detected, low temperature detected, output on List price 300.00 CONTROLS web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 75

CONTROLS Thermostats - Continued CONTROLS Timers CONTROLS TS-5 - Push button timer 6kW Application Mounting Time delay Switching capacity Voltage supply Contacts Dimensions Ingress protection Special features Soft start switching List price 142.00 Ideal for controlling halogen heaters including patio heaters Surface 5 minutes to 70 minutes 6kW 230V (250W minimum) 230V Single pole, single throw 110mm x 168mm x 80mm IP55 Can be used in conjunction with a programmable timer and/or a thermostat TS-6 - Push button timer - 3kW Application Mounting Time delay Switching capacity Voltage supply Contacts Dimensions Ingress protection Special features Ideal for controlling halogen heaters including patio heaters Surface 2 minutes to 2 hours 16A 230V 230V Single pole, single throw 85mm x 85mm x 67mm IP66 Touch activated Blue light indicates heating off Red light indicates 1minute operation remaining List price 87.00 PROTIM-7 - Programmable timer Application Programming Mounting Maximum events per day Switching Capacity Voltage Supply Dimensions Ingress Protection Special Features Ideal for use with a variety of commercial and industrial heating schemes 7day, 5 + 2 days or 24hour Surface 4 13A 230V (not recommended for direct switching of halogen heaters) 230V 90 x 115 x 57mm IP30 Advance to next programme Boost (select 1 hour or 2 hours) Override permanently on or permanently off Automatic summer update Battery back up Tough aluminium case List price 114.00 76 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

CONTROLS Switches CS-7 - Three gang switch for fan heater control For use with 800 Series SCH RH SMH Settings On/off/high heat/low heat/fan only (summer use) Voltage supply 230V Mounting Surface Dimensions 148 x 88 x 45mm Ingress protection IP30 List price 60.00 CS-2 - Two gang switch for halogen heater control For use with HN2-3000G/M Settings Full heat/½ heat Voltage supply 230V Mounting Surface Dimensions 85 x 85 x 48mm Ingress protection IP30 List price 50.00 CONTROLS CS-3 - Three gang switch for halogen heater control For use with HN2-4500G/M HN2-6000G Settings Full heat/⅔ heat/⅓ heat Voltage supply 230V Mounting Surface Dimensions 146 x 85 x 48mm Ingress protection IP30 List price 69.00 CS-4 - Single gang DP switch for halogen heater control For use with HN2-1500G/M HN2-2000G HN2-3000G/M Settings On/off Voltage supply 230V Mounting Surface Dimensions 85 x 85 x 48mm Ingress protection IP30 List price 38.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 77

CS-5 - Push button For use with MC1 halogen control box Function Triggers MC1 s built-in run-down timer (pre-set between 10 minutes and 140 minutes) Voltage supply 230V Mounting Surface Dimensions 85 x 85 x 48mm Ingress protection IP30 List price 37.00 CS-6 - Master Switch CONTROLS For use with MC1 halogen control box Function Switches system on and off overrides all controls except frost thermostat Voltage supply 230V Mounting Surface Dimensions 85 x 85 x 48mm Ingress protection IP30 List price 39.00 OUH2-S Switch for OUH2 industrial fan heater control For use with Any heater or group of heaters from the OUH2 range Settings On/off/fan only (summer use) Voltage supply 230V Mounting Remote surface mounting or mounted onto an OUH2 heater Dimensions 85 x 85 x 48mm Ingress protection IP30 List Price 50.00 CONTROLS Miscellaneous Controls WH-402 - Movement sensor Application Ideal for use with halogen heaters including patio heaters Mounting Surface Switching capacity 16A 230V Voltage supply 230V Sensing range 12m/180 (both distance and angle can be reduced) Time delay 5 seconds to 18 minutes (adjustable) Dimensions 65mm x 83mm x 115mm Ingress protection IP55 List price 87.00 78 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

VR-2 - Dimmer Application Ideal for use with halogen heaters including patio heaters Mounting Surface Output adjustment 30% to 100% Switching capacity 13A 230V (halogen heaters up to 3kW) Voltage supply 230V Contacts Single pole, single throw Dimensions 115mm x 90mm x 58m Ingress protection IP55 Special features Definite click to off List price 109.00 Contactors Model Poles Amps per Pole Max kw per Pole @230V List price CON-32 3 32 7 34.00 CON-50 3 50 11.5 45.00 CON-80 3 80 18 86.00 ENCL-D Enclosure for CON-32 and CON-50 18.00 CONTROLS CONTROLS SystemX CX1 - Controller with thermostat CX1 with thermostat CX2 with tamper resistant thermostat For use with Maximum number of heaters controlled Thermostat range Settings Connection to first heater Mounting Dimensions All heaters in System X range in any sequence 12 0 to 30 C on/off/high heat/low heat/fan only (summer use) Cat5 cable Surface 120mm x 80 x 40mm List price 129.00 CX2 - Controller with tamper resistant thermostat As CX1 except Thermostat is tamper resistant List price 131.00 CX3 - Controller without thermostat CX3 without thermostat As CX1 except Without built-in thermostat List price 121.00 CXS - Optional Remote Sensor CXS optional remote sensor for CX1 or CX2 Can be used with CX1 CX2 When connected overrides built-in sensor List price 24.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 79

the brand promise We provide heating systems for just about every commercial and industrial application We are experts in underfloor heating and carry vast stocks Friendly experienced staff are always available to provide technical assistance We offer a free design service We carry out free of charge and no obligation site visits throughout the UK Next day delivery is available for almost all products How to Order BN Thermic products can be ordered from almost all UK electrical wholesalers Visit www.bnthermic.co.uk or call us for details of a wholesaler in your area This price list shows list prices call your preferred wholesaler for your trade price Contact us for technical advice, free designs or detailed quotations BN Thermic Ltd 34 Stephenson Way Crawley West Sussex RH10 1TN Find us on Tel 01293 547361 Fax 01293 531432 Email sales@bnthermic.co.uk Web www.bnthermic.co.uk