User s Guide Wireless Doorbell for IWATCHALARM (Add-On) Model: SM-105DB

User s Guide Wireless Doorbell for IWATCHALARM (Add-On) Model: SM-105DB

Copyright 2016 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan. The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by SecurityMan. SecurityMan Inc assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. FCC Information Notes on FCC s Consistent Statement of Information This product meet the requirements specified in Part 15 of FCC Regulation. Operation rests with the following two conditions: (1) The equipment should not cause any harmful interference. (2) The equipment must receive and process any interference, including any possible interference caused by operation mistakes. After testing the product, we confirm that the camera complies with the provision for class C digital equipment in the 15th part in FCC regulations; and the receiver complies with the limitations for class B digital equipment in Part 15 of FCC regulation. The product generates, applies and emits radio waves. It might cause harmful interferences to wireless communication if not be installed and used following the description of the manual. The product may cause interference in residential area, and the customer should take remedies to eliminate the interference on their own costs. If the product causes any harmful interference to wireless equipment or disturbs the receiving of TV signals (it can be identified by turning on and off the product), you can solve the trouble by following methods: Readjust the product or put it in another place. Extend the distance between the equipment interfered and the product. Refer to dealers or experienced radio electrician for help. Warranty SecurityMan Inc warrants that this product will be free from defects in title, materials and manufacturing workmanship for one year or otherwise specified on the product packaging. This limited warranty shall commence from the date of purchase. SecurityMan products warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer s only obligation, SecurityMan will repair or replace the product. This warranty shall not apply to products that have been subjected to abuse, misuse, abnormal electrical or environmental conditions, normal wear and tear, or any condition other than what can be considered normal use. Warranty Disclaimer SecurityMan Inc, makes no other warranties, express, implied or otherwise, regarding this product, and specifically disclaims any warranty for merchantability or fitness for a particular purpose. The exclusion of implied warranties is not permitted in some states and the exclusions specified herein may not apply to you. This warranty provides you with specific legal rights. There may be other rights that you have which vary from state to state.

Limitation of Liability The liability of SecurityMan Inc, arising from this warranty and sale shall be limited to a refund of the purchase price. In no event shall SecurityMan be liable for costs of procurement of substitute products or services, or for any lost profits, or for any consequential, incidental, direct or indirect damages, however caused and on any theory of liability, arising from this warranty and sale. These limitations shall apply not withstanding any failure of essential purpose of any limited remedy. For Customer Service: 888-977-3777 SecurityMan 4601 E. Airport Drive, Ontario, CA 91761, USA Tel: 888-977-3777 Tel: 909-230-6668 Fax: 909-230-6889 Email: info@securitymaninc.com Website: http://www.securitymaninc.com Copyright 2016 by SecurityMan v2.2 Features Transmits up to 300ft clear line of sight Real time push notifications (requires SM-025H alarm host) Specifications Battery Type: 3.0V (2 x AAA batteries, last up to 1 year) LED s: 1 (Red) Button: 1 Transmission Distance: 300ft clear line of sight Transmission Frequency: 433Mhz Size (LxWxH): 2.94 x 1.56 x.81 Contents Wireless doorbell Mounting bracket Mounting accessories 2x AAA Batteries Users manual

Product Basics Label Window SETUP Remove the battery cover from the back of the doorbell by sliding it downward, insert the 2 AAA batteries that were provided and slide the cover back on. Once the cover is back on, test the doorbell by pressing the button and the red LED should flash with each press. NOTE: Make sure you remove any plastic wrap covering the battery prior to inserting them.

ADDING THE SENSOR TO THE APP The HOMEBOT Smartphone app has a built in user friendly step-by-step interactive guide that you can follow when adding a device. Make sure you have the app installed on your Smartphone or tablet and that you have successfully added the alarm host to the app. Make sure the device(s) being added is no more than 2 feet from the host during the pairing process. You can place them in the desired location when completed. When you are ready, launch the app and set it to the control center as shown below. 1. On the control center, tap on the doorbell icon and then tap on the + (add) symbol to begin adding the new device.

2 Press and Hold the doorbell button on the sensor being added until the sensors Red LED begins to flash rapidly and then press next on the Smartphone prompt. Once your sensor has been detected by the alarm host you will be given the opportunity to name (front door, living room, etc) the device prior to saving it. When done tap on the Save option. 3. Once the sensor has been successfully added to the host you may proceed to mounting it in the desired location. MOUNTING 1. Remove the backing on the slotted piece of Velcro and attach it to the back end of the doorbell as shown below. Make sure the slots align perfectly around the battery compartment so that it does not complicate changing the batteries later.

2. Find a dry location for the door bell and screw in the abrasive piece of the Velcro using the screws provided. Then attach the doorbell to the abrasive end of the Velcro that was screwed into the wall and you are done. If you encounter any difficulty in the operation of this product after reading the manual, please feel free to contact us. You can reach us by phone at 1-888-977-3777 from 8:30 AM to 5:30 PM Monday through Friday (Pacific Standard Time) or by email techsupport@securitymaninc.com. We will be happy to answer your questions and help you in any way we can.