ArgoMatic Integrated Automation Rexroth Bosch Group System Integrator Have you ever thought about Retrofit? DeLorean-BackToTheFuture - Fred Ottens
2 - Argomatic
Argomatic - 3 Retrofit / Modernization: achieve the highest levels The mechanics of your machine is still in good condition, the controls work well for decades, but no longer correspond to current technical level? Updates, new environmental laws or regulations may require an upgrade? New Features To continue to use your system without problems, ArgoMatic can upgrade your machines with the latest servodrives and control systems. The new hardware provides reliable and economical operation of your system. With a new control system it s also easily add new features. Support for you ArgoMatic technicians are able to check your current system and based on your specifications, are able to put forward a new offer includes new features for your plant. ArgoMatic technicians are able to follow the installation and the commissioning of the plant and are able to ensure the training of your operating personnel.
4 - Argomatic [CC BY 2.0] Tipping Painted Cars - Richie Diesterheft
Argomatic - 5 When retrofit: the hardware in use has been discontinued or hardly available in case of failure need to update the plant with a low budget available need to make the plant compliant with current regulations the maintenance has become very expensive high plant downtime due to length of service The advantages: reduction of maintenance activities extension of the plant life fast ROI of retrofit/modernization activity improvement of system efficiency increase of plant productivity increase of safety standards
6 - Argomatic Retrofit for the automation The current evolution of supervisory and control system available today makes integrated solutions able to fulfill even the most extreme requirements while at the same time keep costs low. So it s possible to modernize an existing plant with a limited budget. Many years of experience developed by ArgoMatic technicians into develop and installation of automation for metal forming machines allow ArgoMatic to retrofit any existing type of system: feeder, transfer, a Cartesian or anthropomorphic robot. p ArgoMatic, in addition to the retrofit activities, has the skills and knowledge in order to extend or replace your system.
Argomatic - 7 Retrofit for the press The recent regulations provides the press in service since 1 October 1987 are equipped with defined safety devices. Moreover, as noted, the mechanical part of aging much more slowly than electronics. The rapid obsolescence of electronics parts, coupled with the necessary adjustments in terms of safety and new production requirements, put the user in front of a dilemma: replace old machines with new ones suited to current standards with a high budget solution, not always available; retrofit the existing machines, replacing obsolete parts and keeping the fully functional ones. Performing the retrofit, also old machines regain new life and greater productivity.
8 - Argomatic Retrofit of thermoforming machines Replacement of old and discontinued components can provide new efficiencies to thermoforming machine still mechanically in good condition. The retrofit of a thermoforming machine provides as follows: Siemens touchscreen panel PC Siemens PLC S7-300 series Siemens HS Heating control card Sick-Stegmann wire encoder with SSI interface PLC software for plant control HMI software for human-machine interface Replacement of hydraulic solenoid valves Updated technical documentation teleservice system for remote maintenance p The Siemens HS Heating provides: single output channel diagnostic in tension: no internal or external error firmware upgrade by F-EPROM replacing management of up to 16 zones output full-wave controlled from 0% to 100% in 1% steps p Clear and simple HMI pages make setting operations faster.
Argomatic - 9 System Integrator: Providing expertise for intelligent automation ArgoMatic, as Bosch Rexroth System Integrator, supply you with accredited solutions and services to provide genuine added value to your plant or machine. ArgoMatic is able to guide you through Bosch Rexroth world control technology leader with her skills, solid expertise and ongoing accredited training. Rexroth s scalable drive and control systems pave the way for you to totally new solutions in mechanical engineering and plant design. ArgoMatic was founded in 2009 and taking advantage by the wide experience of its members, propose itself as a partner for companies that find themselves facing the challenges of the global market, needing to automate their productive processes. ArgoMatic as a company with a strong innovative vocation, has as target the research and development of systems and products with high technological content, in order to bring to the market advanced and competitive solutions. ArgoMatic consider strategically relevant the in-house design of mechanical, hydraulic, pneumatic, electric/electronic and software projects of machines, owning the know-how and be able to transfer it in the best way to its customers. In this perspective ArgoMatic was selected by Bosch Rexroth as a System Integrator for Motion Control systems.
10 - Argomatic A package of services for a complete solution Consultancy Configuration Programming Solution concept Choosing components Quotation issued Drafting of design and performance specifications Drive design CAE/CAD Design Function programming Drive parametrization Visualisation Software conversion Implementation Commissioning Assembly Control cabinet engineering Installation Process optimization Functional testing Acceptance Istruction Technical support Documentation Training Service Construction drawings Circuit diagrams Operation instruction Parts catalog Service manuals Operator training courses Service training courses 12 months warranty Parts Servicing Maintenance
Argomatic - 11
ArgoMatic Integrated Automation Headquarter: Via del Pascolo, 15 I-24046 Osio Sotto (BG) TEL +39 035 80 85 37 FAX +39 035 199 62 325 www.argomatic.com info@argomatic.com Argomatic Retrofit (EN) REV 140901