Formulas and Calculations for Drilling Operations by G. Robello Samuel Copyright 2010 Scrivener Publishing LLC. Bibliography 1. Azar, J. J., G. Robello Samuel, "Drilling Engineering" Pennwell Publishers, 2006 Marvin R. Jones., "Problems Affecting the Design of Drilling Risers" SPE 5268, SPE 1975. 2. "API Recommended Practice for Drill Stem Design and Operation Limits," API RP7G. 3. "API Bulletin on Performance Properties of Casing, Tubing and Drill Pipe,", API Bui. 5C2,18th Ed., March 1982. 4. Boresi, A. P., Schmidt, R. J., and Sidebottom, O. M. Advanced Mechanics of Materials - 5th Edition, Wiley (New York), 1993. 5. Bourgoyne, A. T., Chenevert, M. E., Mülheim, K. K. and Young, F. S., "Applied Drilling Engineering," Society of Petroleum Engineers, Richardson, TX, 1986. 6. Burkhardt, J. A.: "Wellbore Pressure Surges Produced by Pipe Movement," /. Pet. Tech., (June 1961) 595-605; Trans. A1ME, 222. 7. Colebrook, C. F.: "Turbulent Flow in Pipes, with Particular Reference to the Transition Region between the Smooth and Rough Pipe Laws," J. Inst. Civil Engs., London (1938-39). 8. Chambie Syndicate de la Recherche, Comitedes Technicians, Blowout Prevention and Well Control, 1981 Editions Technip, Paris. 9. Chien, S. F, "Annular Velocity for Rotary Drilling Operations" Proc, SPE Fifth Conference on Drilling and Rock Mechanics. Austin, TX (Jan. 5-6,1971)5-16. 10. Chen, Yu-Che, Lin, Yu-Hsu, and Cheatham, John B., "Tubing and Casing Buckling in Horizontal Wells," Journal of Petroleum Technology, February 1990. 11. Dawson, Rapier and Paslay, P. R.: "Drillpipe Buckling in Inclined Holes," Journal of Petroleum Technology, October 1984. 12. Dodge, D. W. and Metzner, A. B., "Turbulent Flow of Non- Newtonian Systems," Journal of American Institute of Chemical Engineer, 5, 189 (1959). 13. Deli Gao "Down-Hole Tubular Mechanics and Its Applications" China University of Petroleum at Beijing, China Copyright 2006 by 371
372 BIBLIOGRAPHY PETROLEUM UNIVERSITY PRESS, Shandong Province, China. - Contribution from Dali Gao on the Uncertainty of Wellbore Trajectory. 14. Dellinger, T., Gravley, W., and Tolle, G. C. "Directional Technology will Extend Drilling Reach," Oil and Gas Journal Sept.15, 1980, pp. 153-169. 15. Dodge, N. A.: "Friction Losses in Annular Flow," ASME Paper No. 63-WA-ll (1963). 16. Dawson, R., and P. R. Paslay, "Drill Pipe Buckling in Inclined Holes," SPE Paper No. 11167, presented at the 57th Annual Fall Technical Conference and Exhibition of SPE, New Orleans, September 26-29, 1983. 17. Edwards, Jack W., "Engineering Design of Drilling Operations," Presented at the Southern District/API Meeting, March, 1964. 18. Echel,J. R. and Nolley, J. P., "An Analysis of Hydraulic Factors Affecting the Rate of Penetration of Drag-Type Rotary Bits," API Drilling and Production Practice, 1950 and 1951. 19. Feenstra, R. and Zijsling, D. H., The Effect of Bit Hydraulics on Bit Performance in Relation to the Rock Destruction Mechanism at Depth. 20. Fischer, W and Milton Ludwig, Design of Floating Vessels Drilling Riser, SPE 1220 JPT, March 1966. 21. Fontenot, J. E. and Clark, F. E.: "An Improved Method for Calculating Swab and Surge Pressures and Circulating Pressures in a Drilling Well," Soc. Pet. Eng. (Oct. 1974) 451-62. 22. Fredrickson, A. G. and Bird, R. B., "Non-Newtonian Flow in Annuli," Ind. and Eng. Chem. 347 (1958). 23. Glowka, D., Optimization of Bit Hydraulic Configurations," SPE 10240 presented at 56th Annual Fall Tech. Conf., San Antonio, TX, 1981. 24. George R. Gray, H.C.H. Darley, Composition and Properties of Oil Well Drilling Fluids, 4 th Edition, 1981, Gulf Publishing Co., Houston, TX. 25. Galle, E. M. and Woods, H. B., "Variable Weight and Rotary Speed for Lowest Cost Drilling," Annual Meeting of AAODC, New Orleans, LA, September 25-27,1960. 26. Govier, G. W. and Aziz, K., The Flow of Complex Mixtures in Pipes, Van Nostrand Reinhold Pub. Co. (1972), N.Y., New York. 27. Garcia-Cauito, D. and Azar, J. J., "Proper Nozzle Location, Bit Profile, and Cutter Arrangements Have Significant Effects on PDC Bit Performance," SPE 20415 presented at Annual Tech. Conf., New Orleans, LA 1990. 28. Herschel, W. H. and Bulkley, R., Kolloid Z., 39, 291-300 (1926). 29. Herschel, W. H. and Bulkley, R., Proc. ASTM, Part II, 26, 621-629 (1926). 30. Iyoho, A. W. and Azar, J. J., "An Accurate Slot-Flow Model for Non-Newtonian Fluid Flow through Eccentric Annuli," paper SPE 9447 presented at the SPE-AIME Annual Fall Meeting, Dallas, September 21-24,1980.
BIBLIOGRAPHY 373 31. Johancsik, C. A., Friesen, D. B. and Dawson, Rapier. "Torque and Drag in Directional Wells - Prediction and Measurement," Journal of Petroleum Technolog]/, June 1984 (987-992). 32. Kendal, W. A. and Goins, W. C, "Design and Operation of Jet-Bit Programs for Maximum Hydraulic Horsepower, Impact Force, or Jet Velocity," Trans. ASME (1960) 219, 238-247. 33. Kai Sun, Robello Samuel, Boyun Guo, "Effect of Stress Concentration Factors due to Corrosion on Production-String Design" SPE journal of Production & Facilities, Volume 20, Number 4, November, pp. 334-339SPE 90094. 34. Kendal, H. A. (1977-78). Fundamentals of pressure control. Petroleum Engineer International, 6 part series, October, November and December 2977, and January, February and March 1978. 35. Kral, E. et al., "Fracture Mechanics Estimates Drill Pipe Fatigue," Oil Gas Journal, Tulsa, 82(32): 50-5, August 1984. 36. Lubinski, A., Developments in Petroleum Engineering. Volume I, edited by S. Miska, Gulf Publishing Co., 1987. 37. Lubinski, A., Developments in Petroleum Engineering, Volume II, edited by S. Miska, Gulf Publishing Co., 1988. 38. Lubinski, A., "Maximum Permissible Dog Legs in Rotary Boreholes," /. Pet. Technol, Dallas, 13(2): 256-75, February 1961. 39. Lubinski, A., "Fatigue of Range 3 Drillpipe," Rev. Inst. Fr. Pet., Paris, 32(2): 209-31, March/April 1977. 40. Melrose, J. C, Savins, J. G., Foster, W. R., and Parish, E. R., "A Practical Utilization of the Theory of Bingham Plastic Flow in Stationary Pipes and Annuli," Trans. A1ME, 213, 316 (1958). 41. Metzner, A. B., in Advances in Chemical Engineering, edited by T. B. Drew and J. W. Hoopes, Vol.1, p. 77, Academic Press, New York, 1956. 42. Metzner, A. B., Ind. Eng. Chem., 49, 1429 (1957). 43. Metzner, A. B. and Reed, J. C, "Flow of Non-Newtonian Fluids - Correlation of the Laminar, Transition, and Turbulent-flow Regions," Journal of American Institute Chemical Engineers, 1, 434, (1955). 44. Millheim, K. K., et al., "Evaluation and Planning Directional Wells Utilizing Post Analysis Techniques and 3-Dimensional Bottomhole Assembly Program", paper SPE 8339, 1979 SPE ATCE, Las Vegas, September 23-26. 45. McGehee, D.Y., Dahlem, J.S., Gieck, J.C., Lafuze, D, Reinsvold, C.H., Steinke, S.C. "The IADC Roller Bit Classification System" I ADC/SPE 23937, IADC Conference, New Orleans, Feb.18-21,1992. 46. M. T. W. de Zwart "Theory on Loading, Torque, Buckling, Stresses, Strain, Twist, Burst and Collapse" Shell Doc. FS920101. 47. Mitchell, R., Robello S., "How Good is the Torque Drag Model" SPE 105068. SPE/IADC Conference, February 2006. 48. Moore, P. L., "Drilling Practices Manual", Petroleum Publishing Company., Tulsa, (1974).
374 BIBLIOGRAPHY 49. Paul Pastusek and Van Brackin.: "A Model for Borehole Oscillations" SPE 77617 presented at The SPE Annual Technical Conference, Denver, Colorado, U.S.A., pp. 5-8 October 2003. 50. Pratt, C. A.: "Increased Penetration Rates Achieved with New Extended Nozzle Bits," /. Pet. Tech. 51. Recommended Practice for Drill Stem Design and Operating Limits, API 7G, Sixth Edition, 1998. 52. Riley Sheffield. Floating Drilling: Equipment and Its Use. Gulf Publishing Company. 1980. 53. Robello Samuel, Kaiwan Bharucha, Yuejin Luo, Tortuosity Factors for Highly Tortuous Wells: A Practical Approach, SPE 92565,SPE/IADC Drilling Conference, 23-25 February, Amsterdam, Netherlands. 54. Reed, D., Pilehvari, Ali, "A New Model for Laminar, Transitional and Turbulent Flow of Drilling Muds", SPE/IADC Drilling Conference held in Amsterdam, February, 1993, SPE paper no. 25456. 55. Rasmussen, B., Sorheim, J. O., Seiffert, E., Angeltvadt, O., Gjedrem, T., Statoil, World Record in Extended Reach Drilling, Well 33/9-C10, Statfjord Field, Norway, SPE/IADC Drilling Conference, 11-14 March, Amsterdam, Netherlands. 56. Robertson, R. E. and Stiff, H. A., An improved rheological Model for Relating Shear Stress to Shear Rate in Drilling Fluids and Cement Slurries, Trans AIME, Soc. Pet. Eng. J., 261,1976, 31-37. 57. Samuel G. Robello "Downhole Drilling Tools - Theory and Practice for Students and Engineers" Gulf Publishing, 2007. 58. Schuh, F., Engineering Essentials of Modern Drilling, Energy Publications Division of HBJ. 59. Smalling, D. A. and Key, T. A., "Optimization of Jet-Bit Hydraulics Using Impact Pressure," SPE 8440, 54th Annual Fall Tech. Conference presented at Las Vegas, Nev, 1979. 60. Sutko, A. A., "Drilling Hydraulics - A Study of Chip Removal Force Under a Full-Size Jet Bit," Soc. Pet. Eng. ). (Aug. 1973) 233-238. 61. Sutko, A. A. and Myers, G. M.: "The Effect of Nozzle Size, Number, and Extension on the Pressure Distribution under a Tricone Bit," /. Pet. Tech. Skelland, A. H. P., Non-Newtonian Flow and Heat Transfer, John Wiley & Sons Inc., New York, 1967. 62. Savins, J. G., "Generalized Newtonian (Pseudoplastic) Flow in Stationary Pipes and Annuli," Trans. AIME, 213, 325 (1958). 63. Schuh, Frank J.: "Horizontal Well Planning-Build Curve Design", Presented at the Centennial Symposium Petroleum Technology into the Century, New Mexico Tech., N.M., Oct. 1989. 64. Schuh, F. J.: "Computer Makes Surge Pressure Calculations Useful," Oil and Gas }. (Aug. 3, 1961) 96. 65. Stroud, D., Peach, S., Johnston, I., Optimization of Rotary Steerable System Bottomhole Assemblies Minimizes Wellbore Tortuosity and
BIBLIOGRAPHY 375 Increases Directional Drilling Efficiency", SPE 90396. Presented at the SPE Annual Technical Conference, Houston, Texas, U.S.A., and September 2004. 66. Subramanian, R., Azar, J. J., "Experimental Study of Friction Pressure Drop for Non-Newtonian Drilling Fluids in Pipe and Annular Flow", SPE International Oil and Gas Conference Held in Beijing, China, November, 2000. 67. Tomita, Y., Bulletin J.S.M.E., 2, 469 (1959); 4, 77 (1961). 68. Tidewell, D. R., and Ilfrey, W. T., "Developments in Marine Drilling Riser Technology, ASME paper no. 69 - PET-14. 69. Timoshenko, S. P. and Goodier, J. N., Theory of Elasticity - 3rd Edition, McGraw-Hill (New York), 1970. 70. Tom Gaynor, Doug Hamer, David Chen, Darren Stuart, and Blaine Comeaux.: "Tortuosity versus Micro-Tortuosity - Why Little Things Mean a Lot" SPE 67818 SPE/I ADC Drilling Conference held in Amsterdam, The Netherlands, 27 February-1 March 2001. 71. Walker, R. E., and Mayes, T. M., "Design of Muds for Carrying Capacity" J. Pet. Tech (July 1975) 893-900, Trans., AIME. W. C. Goins and Riley Sheffield, Blowout Prevention, Second Edition, Gulf Publishing Co., Houston, TX. 72. Xiaojun He and Age Kyllingstad, "Helical Buckling and Lock-Up Conditions for Coiled Tubing in Curved Wells," SPE Drilling and Completions, (March 1995). 73. Xiushan, L., "Geometry of Wellbore Trajectory," Petroleum Industry Press, Beijing, China, 2006. 74. Young, Jr., F. S., "Computerized Drilling Control," SPE Paper No. 2241, Presented Fall Meeting SPE, 1968. 75. Yuejin Luo, Kaiwan Bharucha, Robello Samuel, Faris Bajwa: "Simple practical approach provides a technique for calibrating tortuosity factors" Oil & Gas Journal 15, 2003.