Multi Digital Scroll System (R-22 and R-410A)

Multi Digital Scroll System (R-22 and R-410A) All Product Brochure

About Acson International ith products available in more than 55 countries spread across 7 continents around the world, Acson is truly international. Backed by an advanced research and development team, state-of-the-art manufacturing facilities as well as highly-trained and extensive service network, Acson International has the key to provide ideal solution for any air-conditioning system. ith more than 25 years of manufacturing experience, Acson International has the proficient skills to continue to strive for quality excellence. Meanwhile, we devote our energy and effort to fulfil world wide customer satisfaction. Even in light of our past efforts and success, we are as determined as ever to keep bringing our products and services to every corner of the world. Acson International is indeed a global force with local presence. Central America Barbados Oceania Australia Fiji New Caledonia Papua New Guinea Middle East Jordan Kuwait Lebanon Oman Qatar Reunion Saudi Arabia Syria UAE Tunisia Europe Austria Czech Republic Croatia Denmark England Finland Germany Greece Hungary Italy Kazakhstan Netherlands Poland Portugal Romania Russia Spain Sweden Turkey Asia Bangladesh India Indonesia Malaysia Myanmar Nepal Pakistan Sri Lanka

PRODUCT Horizontal Discharge MDS R-22 Condensing Unit Vertical Discharge Horizontal Discharge MDS R-410A Condensing Unit Vertical Discharge Specification R-22-1 R-22-2 R-22-2 R-410A - 1 R-410A - 1 R-410A - 2 R-410A - 3 Features Pg.12 Pg.12 Pg.12 Pg.12 Pg.12 Pg.12 Pg.12 9,000 15,000 20,000 25,000 30,000 Capacity (r) 40,000 50,000 60,000 100,000 200,000 300,000 400,000 450,000 500,000 Cooling only Model Heat Pump Model System Features Application OTHERS MDS100BR IPLV Testing COP (/) 4.5 Heating 4 3.5 Cooling 3 2.5 IPLV(C) = 3.56 IPLV(H) = 3.71 Temp. Tr Ts Building Type: House / Apartment / Condominium Building Type: School / College / University 2 Capacity (%) 0 20 40 60 80 100 IPLV Testing Condition: Cooling cycle: 27 C DB / 19 C B indoor and 27 C DB outdoor Heating cycle:20 CD B /15 CB indoor and 7 C DB / 6 C B outdoor Pg.4 1 2 3 4 Time The temperature fluctuation range of traditional air conditioning system The temperature fluctuation range of A5MDS system Tr = Room Temperature Ts = Set Temperature Building Type: Department Store / Restaurant Pg.10 2

LINE-UP all Mounted G Series Ceiling Cassette A Series Ceiling Cassette C Series Ceiling Convertible E Series Ceiling Convertible D Series Ceiling Concealed C Series Ducted Blower R-410A - 3 R-22-3 R-410A - 4 R-22-3 R-410A - 5 R-22-4 R-410A - 5 R-22-4 R-410A - 6 R-22-5 R-410A - 6 R-22-5&6 R-410A - 7 R-22-6 Pg.12 Pg.13 Pg.14 Pg.14 Pg.15 Pg.16 Pg.17 Pg.18 Software Accessories Job Reference Pg.19 Pg.20 Pg.21 3

S y s t e m F e a t u r e s Utilising the digital scroll compressor technology, the Acson Multi Digital Scroll System (AMDS) is seen as the next generation products for high-efficiency air conditioning. Better Part Load Efficiency Most air-conditioning system operates in the 30%~70% region. Integrated with the digital scroll compressor technology, AMDS is capable to modulate AMDS100BR IPLV Testing COP (/) its supply capacity to 4.5 meet most indoors Heating 4 requirement closely. This modulating capability enable the AMDS system to offer higher IPLV (Integrated Part Load Value). 3.5 3 2.5 Cooling IPLV(C) = 3.56 IPLV(H) = 3.71 2 Capacity (%) 0 20 40 60 80 100 IPLV Testing Condition: Cooling cycle: 27 C DB / 19 C B indoor and 27 C DB outdoor Heating cycle: 20 C DB / 15 C B indoor and 7 C DB / 6 C B outdoor AMDS 100B System 100% Digital Operating 5% Fixed Compressor Operating Digital Operating Loading Unloading More Economical Operation ith higher IPLV, AMDS is able to operate with lower power consumption. No Conversion Lost Comparing to the traditional inverter drive air-conditioner, AMDS has eliminated the possibility of lost of energy during the conversion of power signal. AC Digital Compressor Capacity Controller PM valve Transformation Comsumption = 0% AC AC DC Transformer Capacity Controller DC Transformation Concumption = 0% AC DC Frequency Conversion Converted Frequency Motor Consumption = 5-10% Inverter Compressor AMDS System T r a d i t i o n a l I n v e r t e r S y s t e m 4

Improved Electromagnetic Compatibility Unlike variable speed compressors air conditioners, AMDS runs at a constant speed throughout the operation, thus 5th there is lower electromagnetic 7th interference. This unique feature reduces the need for expensive 11th electromagnetic suppression 13th electronics required to ensure electromagnetic compatibility. 17th 19th AMDS System EMC Standard Inverter System 0 1 2 3 4 5 EMC comparison during development stage Tighter Temperature Control The ambient of the outdoor and indoor change frequently and this will affect the indoor cooling and heating load. ith AMDS system, using an improved control algorithm, the temperature is kept closer to the set temperature. Temp. Tr Ts 1 2 3 4 The temperature fluctuation range of traditional air conditioning system The temperature fluctuation range of AMDS system Tr = Room Temperature Ts = Set Temperature Time Better Dehumidifying Performance The continuously operating compressor in the AMDS system provides better dehumidifying performance, and hence able to reduce the indoor RH to a more desired level. ith lower RH in the interior, the growth of the bacteria and fungus are inhabited. 5

Better PERFORMANCE Better CHOICE Better SOLUTIONS Temperature C ider Operating Range AMDS system undergo rigorous test to ensure that the system can operate within -15ºC to 43ºC. 50 40 30 20 10 0-10 -20 Cooling Cycle 43 CDB 0 CDB Heating Cycle 16 CB -15 CDB Rapid Cooling and Heating Capability The improved heat-exchanger combining with the better efficiency compressor promotes rapid exchange between refrigerant and air, ensuring set temperature to be achieved faster compared to traditional air-conditioning system. Intelligent Capacity Modulation The AMDS system operates in a stepless capacity modulation ranging from 10~100%. The modulation will closely match the demand capacity whereby contributing higher IPLV. Initial Temperature Setting Temperature t1 Traditional Air Conditioning AMDS System t2 Time 6

Long Piping Design For Flexibility Piping length between outdoor and indoor unit can be extended up to 150 meters. The height between outdoor unit and indoor unit can be extended up to 50 meters. The height difference between indoor units can be as high as 15 meters. This greatly reduces constraint and offers more flexibility in system design. Piping Length 150m Height 50m Height 15m Better Place Utilisation AMDS uses the single outdoor multiple indoors combination. This concept has greatly reduced outdoor units and enhances flexibility during installation. Better Solution Comparing to conventional chilled water system, AMDS required far less equipment. Boilers, cooling tower are things in the past with AMDS. Thus, AMDS is a better solution for new projects or even retrofit purposes. Conventional Chilled ater System AMDS System Easier Installation In-house designed piping joints and wiring connection make it possible to install AMDS system faster and easier. The refnet joint is provided by the factory in accordance with different indoor units, which will reduce the work force at site. Only a common 2-core, screen cable wire is required to enable communication between outdoor and indoors. 7

Floor by Floor Installation* The optional outdoor fan with external static pressure of 50Pa is suitable for short-discharge ductwork application. ith this feature, an outdoor unit can be placed on each floor, thus allowing installation to be performed floor by floor. * Please contact your local sales office for more information. Adapts Easier to Any Floor Plan The wide indoor models can meet the needs of building size and interior design easier. Incorporate with the flexible piping design, the AMDS system is suitable for most type of floor layout and various applications. Alarm and Diagnosis System The AMDS system is built in with an alarm system, alerting owners or users for abnormal operation. A user-friendly diagnosis system helps to identify the problems, ensuring continuous operation of the AMDS system. AUTO 8

Auto-Random Restart After power failure, the AMDS system will automatically restart operation base on the last state memory. Setting of the unit will not be lost, thus eliminating the needs for re-programming. Central Control System The AMDS System Management Software is designed with user-friendly interface, enable simple monitoring and control of the system via a computer. Variety of Indoors The AMDS indoors come with a variety of design and capacity which can be selected to suit most air conditioning needs. Large Capacity AMDS-B series is capable to connect up to 48 units of indoors. Total indoor units capacity can range from 50% to 120% of the outdoor capacity. 9

A p p l i c a t i o n ith all these advantages, it is very clear that AMDS is a better solution for centralised air-condition system. hat would be the consideration factor to select AMDS? Here are some of the main consideration factors and examples. Factor 1 - Location for outdoor is limited. AMDS can be used due to the ability to couple multiple indoors with only 1 outdoor. Better space utilization. Factor 2 - Various type of indoor unit with separate temperature requirement AMDS system can be couple with various type of indoors. Each indoor can be design to supply to a specific area only and the temperature setting is base on individual indoor setting. Factor 3 - Heat load of the same air-conditioned area varies AMDS is able to match the indoor load requirement with its part loading capability. Factor 4 - Centralized Control AMDS outdoors and indoors can be linked together and control using the AMDS Control & Monitoring Software. The software can also perform scheduling of the indoor units base on the operating duration. Factor 5 - Places that require low or no EMC interference The AMDS modulation is control by mechanical parts. No change in power supply (frequency or current), thus lower electromagnetic interference. Building Type: House / Apartment / Condominium Consideration: Location for outdoor is limited. Various type of indoor unit with separate temperature requirement. Heat load of the same air-conditioned area varies Building Type: Exhibition / Concert Hall Consideration: Heat load of the same air-conditioned area varies. Various type of indoor unit with separate temperature requirement Centralized Control 10

Building Type: Department Store / Restaurant Consideration: Heat load of the same air-conditioned area varies. Various type of indoor unit with separate temperature requirement Centralized Control Building Type: Hospital Consideration: Places that require low or no EMC interference Heat load of the same air-conditioned area varies. Various type of indoor unit with separate temperature requirement Centralized Control Building Type: Offices Consideration: Heat load of the same air-conditioned area varies. Various type of indoor unit with separate temperature requirement Location for outdoor is limited Centralized Control 11

O u t d o o r F e a t u r e s The brain of the AMDS system is the compressor which is incorporated in the outdoor condensing unit. ith this technology, the outdoor is constructed in a uniform and solid design and focusing on smaller footprint to provide better space utilisation. Reliable Technology AMDS system adopts the advantaged capacity modulation technology to reduce the control devices, which reduce the malfunction odds mostly. AMDS system has better oil return performance even at low capacities, which will make sure that all of the removable parts of the compressor can be lubricated and cooled down. It reduces the start/stop times, which will reduce the attack to the electricity supply net. The PM (Pulse idth Modulation) valve has the longevity of 40 million times. The design is simple and there is no requirment for bypass valve. Unique Return Oil Technology Small Footprint The outdoor unit of AMDS system is designed as package, the structure occupies less space and is easier to move. Uniform Design The outdoor units can be located on the rooftop. The uniform outlook and dimension allows side by side installation. Quiet Operation The condensing unit utilises an advanced spiral fan blades. The smooth material and fan blade design help to reduce the turbulent flow and thus reduce the air flow noise. 12

all Mounted G Series Acson is focused on developing new and exciting products to improve everyday living environment of the 21st century. The all-new NanoShield combines powerful sterilizing and deodorizing effect of NanoSilver and Nano-Photocatalyst. Silver is used from the days of Hippocrates (Father of Medicine) as a healing agent and its use has been expanded into anti-bacterial applications ever since. Modern nanotechnology provides through full-infusion onto the filters and larger coated surface area. I n d o o r F e a t u r e s AMD 09/10/15/20/25 G A5MD 09/10/15/20/25 G Cooling Heating 8,500 22,200 2.5 k 6.5 k 9,600 25,200 2.8 k 7.4 k NanoPhotocatalyst - devocs & deodorization (150 times stronger than high performance activated carbon) NanoSilver-bacteria & germs elimination Pre Filter New Aesthetically Outlook A smooth front panel makes the cleaning process much easier for the user. These units blended easily into any interior decoration and design. The centrally located LED light makes it easier for user to check the operating conditions. 3-Fold Heat Exchanger The compact design of this 3-fold structure provides a large surface area for better & efficient heat exchange. Double Louver This new louver design together with its automatic air swing function fully optimizes the room comfort by distributing the air evenly to every corner of the room. 13

Ceiling Cassette A and C Series ACKD 10/15/20 C ACKD 20/25/30/40/50 A A5CKD 10/15/20 C A5CKD 20/25/30/40/50 A Cooling Heating 9,600 47,800 2.8 k 14.0 k 10,900 54,600 3.2 k 16.0 k Stylish And Slim Panel The slim panel can be blended easily into most interior decoration and design. 4 ay Air Discharge And Air Swing It comes with 4 way air discharge and air swing function to ensure better air distribution and circulation in the room. Built-In High Head Drain Pump The unit comes with a built-in high head drain pump 700mm head. A safety float is incorporated in the drain pump to monitor its water level. 700mm 14

Ceiling Convertible E Series ACMD 20/25/28 E A5CMD 15/20/25/28 E Cooling 19,100 27,300 5.6 k 8.0 k Heating 21,500 30,700 6.3 k 9.0 k Ceiling and Floor Installation Option The ACMD is designed with the option to install either below the ceiling or mounted at low wall position to suit most interior design requirement. all bracket supplied as optional item Flexible Installation The unit is designed to work with high pressure head drain pump (optional). Thus offering flexibility for installation on condensate drain pipe. The drain pump comes with a high head and is incorporate with the float switch as safety protection. 700mm Better Serviceability The washable filter can be easily access by just pulling down the intake grill. During servicing or repairing, only the bottom panel need to be remove in order to access. Fan Motor Blower iring Connection Control Box Piping Connection 15

Ceiling Convertible D Series RCMD 40/50 D RCMD 62 C R5CMD 40/50 D R5CMD 62 C Cooling 38,200 56,000 11.2 k 16.4 k Heating 42,700 63,100 12.5 k 18.5 k Ceiling And Floor Installing Option The unit is designed with possibility to be installed under the ceiling or sitting on the floor to suit most interior design requirements. Two ay Air Discharge Equipped with two way air discharge, at front and bottom discharge; to provide better air distribution, for both cooling and heating effect. Automatic Air Swing The swing mode enables the air flow to be evenly distributed into the room from the front discharge area. 16

Ceiling Concealed C Series ACCD 10/15/20/25/30/ 40/50/60 C A5CCD 10/15/20/25/28/30/ 38/40/50/60 C Cooling 9,600 56,000 2.8 k 16.4 k Heating 10,900 63,100 3.2 k 18.5 k Double Protection Drainage System The primary drain pan is designed with higher thermal insulation material and moulded in gradient for better condensate water drainage. The extra secondary drain pan built in to the standard unit offers extra protection against possible water leaking problems. Primary Drain Pan Polysterene (Ps) ith Height Impact Polystyrene (Hips) Cover Secondary Drain Pan ith Insulation Flexibility In System Design The unit offers fan motor that can operate up to 4 speeds, thus provide choices of external static pressure for designing ducting system. Duct Accessories (Optional) A set duct accessories specifically designed to fit and to suit the ACCD-C model is being created. Thus offers a one stop solution to installing the unit. Flexible Round Duct (field supply) Discharge Adaptor Square Grille Secondary Drain Pan Assembly with Insulation c/w Adaptor Available for ACCD 10-25 C/CR only. Ceiling Concealed Unit Square Return Grille Assembly c/w Adaptor & Filter Primary Drain Pan ACC Return Assembly Bracket c/w Adaptor Flexible Round Duct (field supply) 17

Ducted Blower ADBD 80 / 100 Cooling 76,400 95,500 22.4 k 28.0 k Heating 85,300 107,500 25.0 k 31.5 k Better Air Distribution For Comfortable Living The conditioned air can be effectively distributed to the room through ducting. ICE CREAM ICE CREAM Complete Model To ease installation, this model has the Electronic Expansion Valve (EXV) built into the unit. User do not need to worry about the noise from the EXV as it is properly insulated. Extended Indoor Model The ducted blower is designed to cater higher indoor capacity required. Combining ceiling concealed and ducted blower, the MDS system is able to fulfill ducted application with capacity range from 2.8k to 28.0k 18

I n t e g r a t e d S o f t w a r e As a system provider, Acson AMDS system is equipped together with a collection of customized software to provide system design & selection and individual units control & monitoring. AMDS System Management Software For central monitoring and control purposes, the AMDS offers a real time system. This software is the system to human interface, allowing users or owners to monitor and to control the AMDS system. ith this software, user or owners is able to ; Monitor & control any AMDS indoor & outdoor unit Zoning & grouping capabilities Alarming alert Scheduling option Design Software This software is incorporated with data on indoor models. This allow the designers to choose the appropriate indoors model to suit they needs. Besides that, this software will determine the required quantity of refnet joints, pipes and other accessories base on the design. ith this software, most designs can be completed with just a few simple clicks. 19

C o n t r o l l e r & A c c e s s o r i e s Standard Controller ireless G18 ired Controller Standard wireless handset for wall mounted, ceiling cassette and ceiling convertible. Basic control such as ON/OFF, mode setting, temperature setting and others. Standard wired controller for ACCD-C. Basic control such as ON/OFF, mode setting, temperature setting and others. Optional Controller and Accessories AC 5300 Optional Item. To provide wireless control for wired controller. Basic control such as ON/OFF, mode setting, temperature setting and others. Central Controller Optional Item. To provide group or individual control to indoors (Up to 32 indoors). Basic control such as ON/OFF, mode setting, temperature setting and others. PC Control Refnet & Distributors Joint AMDS Central Monitoring Software (known as Smart Commander) act as the system to human interface. A communication gateway is inclusive for the wiring connection. Piping joint design for the AMDS system. A total of 6 types of refnet joint is available for different piping combination. 20

J o b R e f e r e n c e Shenzhen Xi Yuan, China Residential Sector Indoor Type: Ceiling Concealed AMDS systems has proven to be reliable and a system of choice. Many projects, whether government or privately own premises had chosen AMDS as their comfort provider: Chendu Tian Fu Software Park, China Commercial Sector Indoor Type: Ceiling Concealed Solar Alert Sdn. Bhd., Malaysia Commercial Sector Indoor Type: Ceiling Cassette, all Mounted Pahang IKM Institute, Malaysia Education Sector Indoor Type: Ceiling Cassette, all Mounted 21

R-22 Outdoor Specifications AMDS-AR AMDS 30AR AMDS 40AR AMDS 50AR AMDS 60AR AMDS 70AR 29,002 8,500 34,120 10,000 42,650 12,500 49,474 14,500 61,400 18,000 30,708 9,000 39,238 11,500 46,062 13,500 56,298 16,500 68,200 20,000 NOMINAL TOTAL INPUT POER - 1Ø <3Ø> COOLING HEATING 3,000 2,500 3,500 3,400 4,400 <4,300> 4,200 <3,900> 5,000 <5,000> 4,200 <4,200> 6,200 6,000 AMDS 30A AMDS 40A AMDS 50A AMDS 60A AMDS 70A 29,002 8,500 34,120 10,000 42,650 12,500 49,474 14,500 61,400 18,000 NOMINAL TOTAL INPUT POER - 1Ø <3Ø> 3,000 3,500 4,400 <4,300> 5,000 <5,000> 6,200 POER SOURCE - 1Ø <3Ø> 220-240/1/50 220-240/1/50 220-240/1/50 <380-415/3/50> 220-240/1/50 <380-415/3/50> 380-415/3/50 REFRIGERANT TYPE R-22 R-22 R-22 R-22 R-22 AIR FLO l/s / cfm 1055/2230 695+695/1470+1470 695+695/1470+1470 1055+1055/2230+2230 2225/4694 SOUND PRESSURE LEVEL UNIT EIGHT TYPE IDTH LIQUID db(a) 59 900/35.4 840/33.0 408/16.0 85/188 Flare 9.52 / 3/8 15.88 / 5/8 59 1044/41.1 1058/41.7 430/16.9 115/254 Flare 9.52 / 3/8 19.05 / 3/4 59 1044/41.1 1058/41.7 430/16.9 120/265 Flare 9.52 / 3/8 19.05 / 3/4 60 1247/49.1 1058/41.7 430/16.9 130/287 Flare 9.52 / 3/8 19.05 / 3/4 62 1445/56.9 1058/41.6 430/16.9 140/309 Flare 9.52 / 3/8 19.05 / 3/4 AMDS-BR AMDS 80BR AMDS 100BR AMDS 120BR AMDS 150BR 83,594 24,500 95,536 28,000 110,890 136,480 32,500 40,000 88,712 26,000 102,360 30,000 116,008 146,716 34,000 43,000 NOMINAL TOTAL INPUT POER (COOLING) 7,500 8,500 9,800 12,900 NOMINAL TOTAL INPUT POER (HEATING) 7,200 8,300 9,000 1,100 1 AMDS 80B AMDS 100B AMDS 120B AMDS 150B 83,594 24,500 95,536 28,000 110,890 136,480 32,500 40,000 NOMINAL TOTAL INPUT POER 7,500 8,500 9,800 12,900 POER SOURCE 380-415/3/50 REFRIGERANT TYPE R-22 R-22 R-22 R-22 AIR FLO HI-FAN LO-FAN l/s / cfm l/s / cfm 3194/6768 1528/3237 3194/6768 1528/3237 3472/7357 3750/7945 2083/4414 2222/4708 SOUND PRESSURE LEVEL db(a) 62 64 66 67 UNIT EIGHT IDTH TYPE (LIQUID/) 1840/72.4 990/39.0 840/33.0 275/606 Flare/Brazed 1840/72.4 990/39.0 840/33.0 385/628 Flare/Brazed 1840/72.4 1840/72.4 990/39.0 1290/50.8 840/33.0 840/33.0 290/639 355/783 Flare/Brazed Flare/Brazed LIQUID 12.7/0.5 28.6/1.125 12.7/0.5 28.6/1.125 15.88/0.625 15.88/0.625 28.6/1.125 34.9/1.375 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT THE MACHINE AND 1.42m ABOVE THE MACHINE BASE. 5) THE VALUE OF REFRIGERANT CHARGE IS THE REFRIGERANT CHARGED IN THE BEFORE LEAVING FACTORY. THIS CHARGE DOES NOT INCLUDE THE AMOUNT NEEDED FOR EXTENDED PIPING. R-22-1

AMDS-BR AMDS 180BR AMDS 200BR AMDS 220BR AMDS 240BR NOMINAL TOTAL INPUT POER (COOLING) NOMINAL TOTAL INPUT POER (HEATING) NOMINAL TOTAL INPUT POER POER SOURCE REFRIGERANT TYPE AIR FLO SOUND PRESSURE LEVEL HI-FAN l/s / cfm LO-FAN l/s / cfm db(a) IDTH UNIT EIGHT TYPE (LIQUID/) LIQUID 162,070 170,600 187,660 221,780 47,500 50,000 55,000 65,000 170,600 180,836 197,896 232,016 50,000 53,000 58,000 68,000 14,100 15,200 16,700 19,800 13,200 14,700 16,200 18,500 AMDS 180B AMDS 200B AMDS 220B AMDS 240B 162,070 170,600 187,660 221,780 47,500 50,000 55,000 65,000 14,100 15,200 16,700 19,800 380-415/3/50 R-22 R-22 R-22 R-22 3194+3194/6768+6768 3194+3194/6768+6768 3194+3194/6768+6768 3472+3472/7357+7357 1528+1528/3237+3237 1528+1528/3237+3237 1528+1528/3237+3237 2083+2083/4414+4414 66 66 66 68 1840/72.4 1840/72.4 1840/72.4 1840/72.4 1990/78.3 1990/78.3 1990/78.3 1990/78.3 840/33.0 840/33.0 840/33.0 840/33.0 520/1 146 560/1235 560/1235 570/1257 Flare/Brazed Flare/Brazed Flare/Brazed Flare/Brazed 15.88/0.625 15.88/0.625 19.05/0.75 19.05/0.75 34.9/1.375 34.9/1.375 38.1/1.5 38.1/1.5 AMDS-BR MASTER UNIT+SLAVE UNIT NOMINAL TOTAL INPUT POER (COOLING) NOMINAL TOTAL INPUT POER (HEATING) MASTER UNIT+SLAVE UNIT NOMINAL COOLING CAP ACITY NOMINAL TOTAL INPUT POER POER SOURCE REFRIGERANT TYPE AIR FLO HI-FAN l/s / cfm LO-FAN l/s / cfm SOUND PRESSURE LEVEL db(a) IDTH UNIT EIGHT TYPE (LIQUID/) LIQUID AMDS 260BR AMDS 280BR AMDS 300BR AMDS 320B AMDS 120BRM+AMDS 150BRS AMDS 150BRM+AMDS 130BRS AMDS 150BRM+AMDS 150BRS AMDS 160BRM+AMDS 160BRS 238,840 255,900 272,960 290,020 70,000 75,000 80,000 85,000 255,900 272,960 290,020 313,904 75,000 80,000 85,000 92,000 21,300 22,800 26,200 27,700 20,900 22,000 23,600 25,500 AMDS 260B AMDS 280B AMDS 300B AMDS 320B AMDS 120BM+AMDS 150BS AMDS 150BM+AMDS 130BS AMDS 150BM+AMDS 150BS AMDS 160BM+AMDS160BS 238,840 255,900 272,960 290,020 70,000 75,000 80,000 85,000 21,300 22,800 26,200 27,700 380-415/3/50 R-22 R-22 R-22 R-22 3472+3750/7357+7945 3750+3750/7945+7945 3750+3750/7945+7945 3750+3750/7945+7945 2083+2222/4414+4708 2222+2222/4708+4708 2222+2222/4708+4708 2222+2222/4708+4708 68 69 69 69 1840/72.4 1840/72.4 1840/72.4 1840/72.4 2290/90.2 2590/102.0 2590/102.0 2590/102.0 840/33.0 840/33.0 840/33.0 840/33.0 645/1422 710/1565 710/1565 720/1587 Flare/Brazed Flare/Brazed Flare/Brazed Flare/Brazed 19.05/0.75 19.05/0.75 19.05/0.75 19.05/0.75 41.3/1.625 41.3/1.625 41.3/1.625 41.3/1.625 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT THE MACHINE AND 1.42m ABOVE THE MACHINE BASE. 5) THE VALUE OF REFRIGERANT CHARGE IS THE REFRIGERANT CHARGED IN THE BEFORE LEAVING FACTORY. THIS CHARGE DOES NOT INCLUDE THE AMOUNT NEEDED FOR EXTENDED PIPING. R-22-2

R-22 Indoor Specifications AMD-G POER SOURCE REFRIGERANT TYPE/ CONTROL AIR DISCHARGE CONTROL OPERATION HIGH AIR FLO MEDIUM LO SOUND PRESSURE LEVEL (H/M/L) IDTH UNIT EIGHT CONDENSATE DRAIN TYPE LIQUID k k l/s / cfm l/s / cfm l/s / cfm dba AMD 09G AMD 10G AMD 15G AMD 20G AMD 25G 8500 9600 12300 19100 22200 2.5 2.8 3.6 5.6 6.5 9600 10900 13600 21500 25200 2.8 3.2 4.0 6.3 7.4 220-240 / 1 / 50 R-22 / EXV DOUBLE LOUVER (UP & DON) & GRILLE (LEFT & RIGHT) IRELESS REMOTE CONTROL 130 / 275 142 / 300 163 / 345 231 / 490 397 / 630 106 / 225 118 / 250 135 / 285 193 / 410 231 / 490 83 / 175 94 / 200 104 / 220 160 / 340 208 / 440 40 / 35 / 29 39 / 34 / 28 42 / 36 / 29 43 / 40 / 35 49 / 44 / 42 260 / 10.2 304 / 12.0 304 / 12.0 799 / 31.5 899 / 35.4 1062 / 41.8 1062 / 41.8 198 / 7.8 222 / 8.7 222 / 8.7 10/22.05 16 / 0.63 12/26.46 16 / 35.27 16 / 35.27 20 / 0.79 FLARE VALVE 6.35 / 1/4 9.52 / 3/8 9.52 / 3/8 12.70 / 1/2 15.88 / 5/8 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND 1m BELO THE UNIT. 5) ALL INDOOR S CAN BE USED FOR COOLING ONLY OR HEATPUMP APPLICATION. ACKD-A POER SOURCE REFRIGERANT TYPE / CONTROL AIR DISCHARGE CONTROL OPERATION HIGH AIR FLO MEDIUM LO EXTERNAL STATIC PRESSURE (H/M/L) SOUND PRESSURE LEVEL (H/M/L) IDTH ( ) - ITH PANEL UNIT EIGHT (UNIT + PANEL) CONDENSATE DRAIN TYPE LIQUID k k Pa / in.wg. dba ACKD 20A ACKD 25A ACKD 30A ACKD 40A ACKD 50A 19100 22200 30700 38200 47800 5.6 6.5 9.0 11.2 14.0 21500 25200 34100 42700 54600 6.3 7.4 10.0 12.5 16.0 220-240 / 1 / 50 R-22 / EXV 220-240 / 1 / 50 R-22 / EXV 4 AY AUTOMATIC LOUVER (UP & DON) IRELESS REMOTE CONTROL 220-240 / 1 / 50 R-22 / EXV 349 / 740 368 / 780 415 / 880 467 / 990 491 / 1040 297 / 630 311 / 660 349 / 740 406 / 860 448 / 950 283 / 600 283 / 600 321 / 680 359 / 760 411 / 870 0 0 0 0 42 / 39 / 37 45 / 42 / 40 49 / 45 / 43 51 / 48 / 46 53 / 52 / 50 335 (378) / 13.2 (14.9) 820 (930) / 32.2 (36.6) 820 (930) / 32.2 (36.6) 31 + 4 / 68.3 + 8.8 32 + 4 / 70.5 + 8.8 35 + 4 / 77.2 + 8.8 38 + 4 / 83.8 + 8.8 40 + 4 / 88.2 + 8.8 19.05 / 3/4 FLARE VALVE 6.35 / 1/4 9.52 / 3/8 15.88 / 5/8 19.05 / 3/4 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS C 9612 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1.4m BELO FASCIA. 5) ALL INDOOR S CAN BE USED FOR COOLING ONLY OR HEATPUMP APPLICATION. R-22-3

ACKD-C POER SOURCE REFRIGERANT TYPE / CONTROL CONTROL AIR FLO EXTERNAL STATIC PRESSURE (H/M/L) AIR DISCHARGE OPERATION SOUND PRESSURE LEVEL (H/M/L) ( ) - ITH PANEL UNIT EIGHT (UNIT + PANEL) CONDENSATE DRAIN HIGH MEDIUM LO IDTH TYPE LIQUID k k Pa / in.wg. dba ACKD 10C 9600 2.8 10900 3.2 ACKD 15C 12300 3.6 13600 4.0 ACKD 20C 19100 5.6 21500 6.3 220-240 / 1 / 50 R-22 / EXV 220-240 / 1 / 50 R-22 / EXV 194 / 410 184 / 390 175 / 370 0 44 / 43 / 42 4 AY AUTOMATIC LOUVER (UP & DON) IRELESS REMOTE CONTROL 194 / 410 184 / 390 170 / 360 0 44 / 42 / 41 212 / 450 203 / 430 194 / 410 0 47 / 46 / 44 250 (295) / 9.8 (11.6 570 (640) / 22.4 (25.2) 570 (640) / 22.4 (25.2) 22 + 2 / 48.5 + 4.4 23.2 / 50.7 + 4.4 19.05 / 3/4 23 + 2 / 50.7 + 4.4 FLARE VALVE 6.35 / 1/4 9.52 / 3/8 12.70 / 1/2 15.88 / 5/8 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS C 9612 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1.4m BELO FASCIA. 5) ALL INDOOR S CAN BE USED FOR COOLING ONLY OR HEATPUMP APPLICATION. ACMD-E k k POER SOURCE REFRIGERANT TYPE / CONTROL AIR DISCHARGE CONTROL OPERATION HIGH AIR FLO MEDIUM LO EXTERNAL STATIC PRESSURE (H/M/L) Pa / in.wg. SOUND PRESSURE LEVEL (H/M/L) dba IDTH UNIT EIGHT CONDENSATE DRAIN TYPE ACMD 20E ACMD 25E 19100 22200 5.6 6.5 21500 25200 6.3 7.4 220-240 / 1 / 50 R-22 / EXV AUTOMATIC LOUVER (UP & DON) IRELESS REMOTE CONTROL 245 / 520 274 / 580 217 / 460 250 / 530 192 / 406 231 / 490 0 0 48 / 46 / 43 50 / 47 / 46 218 / 8.58 1080 / 42.52 630 / 24.80 27 / 60 19.05 / 3/4 FLARE VALVE LIQUID 6.35 / 1/4 9.52 / 3/8 15.88 / 5/8 ACMD 28E 27300 8.0 30700 9.0 293 / 620 269 / 570 245 / 520 0 51 / 48 / 47 28 / 62 NOTE: 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND 1m BELO THE UNIT. 5) ALL INDOOR S CAN BE USED FOR COOLING ONLY OR HEATPUMP APPLICATION. R-22-4

RCMD-D/C POER SOURCE REFRIGERANT TYPE / CONTROL AIR DISCHARGE CONTROL OPERATION HIGH AIR FLO MEDIUM LO SOUND PRESSURE LEVEL (H/M/L) IDTH UNIT EIGHT CONDENSATE DRAIN TYPE LIQUID RCMD 40D RCMD 50D RCMD 62C 38200 47800 56000 k 11.2 14.0 16.4 42700 54600 63100 k 12.5 16.0 18.5 220-240 / 1 / 50 R-22 / EXV AUTOMATIC LOUVER (UP & DON) & MANUAL LOUVER (BOTTOM) IRELESS REMOTE CONTROL 477 / 1010 491 / 1040 731 / 1550 420 / 890 448 / 950 623 / 1320 368 / 780 387 / 820 472 / 1000 dba 54 / 53 / 52 54 / 53 / 52 56 / 53 / 46 249 / 9.80 285 / 11.2 1714 / 67.40 1903 / 74.9 670 / 26.30 680 / 26.8 70 / 154.3 85 / 187.4 19.05 / 3/4 FLARE VALVE 9.52 / 3/8 12.7 / 1/2 19.05 / 3/4 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND 1m BELO THE UNIT. 5) ALL INDOOR S CAN BE USED FOR COOLING ONLY OR HEATPUMP APPLICATION. ACCD-C POER SOURCE REFRIGERANT TYPE / CONTROL CONTROL AIR FLO SUPER HIGH LO EXTERNAL STATIC PRESSURE (H/M/L) AIR DISCHARGE OPERATION HIGH MEDIUM SOUND PRESSURE LEVEL (H/M/L) EIGHT CONDENSATE DRAIN IDTH TYPE LIQUID NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) ALL INDOOR S CAN BE USED FOR COOLING ONLY OR HEATPUMP APPLICATION. k k Pa (in.wg.) dba ACCD 10C 9600 2.8 10900 3.2-142 / 300 123 / 260 104 / 220 49/39/29(0.20/0.16/0.12) 33 / 30 / 26 261 / 10.28 765 / 30.12 411 / 16.18 17 / 37.5 9.52 / 3/8 ACCD 15C 12300 3.6 13600 4.0-241 / 510 208 / 440 170 / 360 49/39/20(0.20/0.16/0.08) 37 / 34 / 29 261 / 10.28 905 / 35.63 411 / 16.18 21 / 46.3 220-240 / 1 / 50 R-22 / EXV DUCTED IRED CONTROL 19.05 / 3/4 FLARE VALVE 6.35 / 1/4 12.70 / 1/2 ACCD 20C 19100 5.6 21500 6.3-316 / 670 302 / 640 278 / 590 69/65/42(0.28/0.26/0.17) 38 / 36 / 34 261 / 10.28 1065 / 41.93 411 / 16.18 22 / 48.5 15.88 / 5/8 ACCD 25C 22200 6.5 25200 7.4-382 / 810 359 / 760 288 / 610 41/31/18(0.16/0.12/0.07) 40 / 39 / 36 261 / 10.28 1200 / 47.24 411 / 16.18 25 / 55.1 9.52 / 3/8 R-22-5

ACCD-C POER SOURCE REFRIGERANT TYPE / CONTROL CONTROL AIR FLO EXTERNAL STATIC PRESSURE (H/M/L) AIR DISCHARGE OPERATION SUPER HIGH HIGH MEDIUM LO SOUND PRESSURE LEVEL (H/M/L) EIGHT IDTH CONDENSATE DRAIN TYPE LIQUID k k Pa (in.wg.) dba ACCD 30C 30700 9.0 34100 10.0 425 / 900 392 / 830 359 / 760 335 / 710 206/167/127/88(0.83/0.67/0.51/0.35) 49 / 46 / 42 / 38 378 / 14.88 929 / 36.57 541 / 21.30 39 / 85.98 15.88 / 5/8 ACCD 40C ACCD 50C 38200 47800 11.2 14.0 42700 54600 12.5 16.0 220-240 / 1 / 50 R-22 / EXV DUCTED IRED CONTROL 519 / 1100 500 / 1060 467 / 990 425 / 900 206/176/127/93(0.83/0.71/0.51/0.37) 51 / 49 / 45 / 41 378 / 14.88 1045 / 41.14 541 / 21.30 42 / 92.59 750 / 1590 651 / 1380 604 / 1280 571 / 1210 176/157/137/108(0.71/0.63/0.55/0.43) 53 / 52 / 50 / 47 378 / 14.88 1299 / 51.14 541 / 21.30 54 / 119.05 19.05 / 3/4 FLARE VALVE 9.52 / 3/8 19.05 / 3/4 ACCD 60C 56000 16.4 63100 18.5 779 / 1650 722 / 1530 675 / 1430 609 / 1290 176/157/137/98(0.71/0.63/0.55/0.39) 55 / 53 / 50 / 47 378 / 14.88 1499 / 59.02 541 / 21.30 62 / 136.69 12.70 / 1/2 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) ALL INDOOR S CAN BE USED FOR COOLING ONLY OR HEATPUMP APPLICATION. ADBD NOMINAL TOTAL INPUT POER POER SOURCE REFRIGERANT TYPE CONTROL AIR FLO LO EXTERNAL STATIC PRESSURE (H/M/L) REFRIGERANT CONTROL (EXPANSION DEVICE) AIR DISCHARGE OPERATION HIGH MEDIUM SOUND PRESSURE LEVEL (H/M/L) EIGHT CONDENSATE DRAIN IDTH TYPE LIQUID Pa (in.wg.) dba ADBD 80 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVEL ARE ACCORDING TO GB/D17758 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1.4M BELO THE UNIT (FREE RETURN AND THE DISCHARGE AIR AS DUCTED TO ADJACENT ROOM). 76400 22400 85300 1700 1444 / 3058 1250 / 2647 1083 / 2294 100 / 0.40 420 / 16.5 1690 / 66.5 879 / 34.6 100 / 220 25.4 / 1.0 ADBD 100 95500 28000 107500 25000 31500 1480 220 ~ 240 / 1 / 50 380 ~ 415 / 3 / 50 R-22 EXV DUCTED IRED CONTROL 1750 / 3706 FLARE VALVE 12.7 / 1/2 12.7 / 1/2 28.6 / 1 1/8 28.6 / 1 1/8 - - 150 / 0.60 57 57 520 / 20.5 1580 / 62.2 1020 / 40.2 150 / 330 25.4 / 1.0 R-22-6

R-410A Outdoor Specification A5MDS-BR A5MDS 50BR A5MDS 60BR A5MDS 70BR 46,000 13,500 51,100 15,000 64,800 19,000 51,100 15,000 59,700 17,500 71,600 21,000 NOMINAL TOTAL INPUT POER COOLING HEATING 4,400 4,300 4,700 4,400 6,000 5,900 A5MDS 50B A5MDS 60B A5MDS 70B 46,000 13,500 51,100 15,000 64,800 19,000 NOMINAL TOTAL INPUT POER 4,400 4,700 6,000 POER SOURCE 380-415 / 3 / 50 380-415 / 3 / 50 380-4150/ 3/ 50 REFRIGERANT TYPE R-22 R-22 R-22 AIR FLO l/s / cfm 1220 / 2590 1665 / 3530 1775 / 3765 SOUND PRESSURE LEVEL db(a) 59 60 62 UNIT EIGHT IDTH TYPE (LIQUID/) 1044 / 41.4 1058 / 41.7 430 / 16.9 120 / 265 FLARE / BRAZE 1247 / 49.1 1058 / 41.7 430 / 16.9 130 / 287 FLARE / BRAZE 1349 / 53.1 1058 / 41.6 430 / 16.9 135 / 297 FLARE / BRAZE LIQUID 9.52 / 3/8 15.88 / 5/8 9.52 / 3/8 15.88 / 5/8 9.52 / 3/8 15.88 / 5/8 A5MDS-BR A5MDS 80BR A5MDS 100BR A5MDS 120BR A5MDS 140BR A5MDS 160BR NOMINAL TOTAL INPUT POER COOLING 85,300 95,536 95,536 109,184 7,200 112,596 126,244 8,000 129,656 143,304 9,700 143,304 160,364 11,300 12,900 HEATING 25,000 28,000 28,000 32,000 7,000 33,000 37,000 7,900 38,000 42,000 9,400 42,000 47,000 10,900 11,900 A5MDS 80B A5MDS 100B A5MDS 120B A5MDS 140B A5MDS 160B 85,300 95,536 112,596 129,656 143,304 25,000 28,000 33,000 38,000 42,000 NOMINAL TOTAL INPUT POER 7,200 8,000 9,700 11,300 12,900 POER SOURCE 380-415 / 3 / 50 380-415 / 3 / 50 380-415 / 3 / 50 380-415 / 3 / 50 380-415 / 3 / 50 REFRIGERANT TYPE R-410A R-410A R-410A R-410A R-410A AIR FLO HI-FAN l/s / cfm 3056 / 6474 3056 / 6474 3055 / 6474 3333 / 7063 3333 / 7063 LO-FAN l/s / cfm 1528 / 3237 1528 / 3237 1528 / 3237 2083 / 4414 2083 / 4414 SOUND PRESSURE LEVEL db(a) 56 57 60 60 60 1840 / 72.4 1840 / 72.4 1840 / 72.4 1840 / 72.4 1840 / 72.4 IDTH 990 / 39.0 990 / 39.0 990 / 39.0 1290 / 50.8 1290 / 50.8 840 / 33.0 840 / 33.0 840 / 33.0 840 / 33.0 840 / 33.0 UNIT EIGHT 290 / 639 300 / 661 305 / 672 350 / 771 360 / 793 TYPE (LIQUID/) Flare / Brazed Flare / Brazed Flare / Brazed Flare / Brazed Flare / Brazed LIQUID 9.52 / 1 /2 12.7 / 1 /2 12.7 / 1 /2 12.7 / 1 /2 12.7 / 1 /2 22.2 / 7 /8 22.2 / 7 /8 22.2 / 7 /8 28.6 / 1 1 /8 28.6 / 1 1 /8 REFRIGERANT CHARGE 7.9 / 17.4 10.0 / 22.0 10.6 / 23.4 12.2 / 26.9 13.4 / 29.5 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVEL ARE ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT THE MACHINE AND 1.42m ABOVE THE MACHINE BASE. 5) THE VALUE OF REFRIGERANT CHARGE IS THE REFRIGERANT CHARGED IN THE BEFORE LEAVING FACTORY. THIS CHARGE DOES NOT INCLUDE THE AMOUNT NEEDED FOR EXTENDED PIPING. R-410A - 1

A5MDS-BR NOMINAL TOTAL INPUT POER POER SOURCE REFRIGERANT TYPE MASTER UNIT+SLAVE UNIT A5MDS 260BR A5MDS 120BRM + A5MDS 140BRS 242,252 71,000 266,136 COOLING 14,500 16,200 17,700 19,800 21,000 HEATING 13,800 14,700 16,900 18,500 20,300 NOMINAL TOTAL INPUT POER AIR FLO SOUND PRESSURE LEVEL UNIT EIGHT PIPE CONNECTION MASTER UNIT+SLAVE UNIT 78,000 A5MDS 260B 242,252 71,000 21,000 380-415 / 3 / 50 HI-FAN l/s / cfm 3472 / 7357 3056 x 2 / 6474 x 2 2778 x 2 / 5886 x 2 3056 x 2 / 6474 x 2 3056 + 3333 / 6474 + 7063 LO-FAN l/s / cfm 2222 / 4708 1528 x 2 / 3237 x 2 1528 x 2 / 3237 x 2 1528 x 2 / 3237 x 2 1528 + 2083 / 3237 + 4414 1840 / 72.4 1840 / 72.4 1840 / 72.4 1840 / 72.4 1840 / 72.4 IDTH 1290 / 50.8 1990 / 78.3 1990 / 78.3 1990 / 78.3 2290 / 90.2 840 / 33.0 840 / 33.0 840 / 33.0 840 / 33.0 840 / 33.0 TYPE (LIQUID/) REFRIGERANT CHARGE db(a) A5MDS 180BR - 160,364 47,000 180,836 53,000 A5MDS 180B - 160,364 47,000 14,500 380-415 / 3 / 50 R-410A 61 370 / 816 Flare / Brazed A5MDS 200BR - 180,836 53,000 201,308 59,000 A5MDS 200B - 180,836 53,000 16,200 380-415 / 3 / 50 R-410A 61 590 / 1301 Flare / Brazed A5MDS 220BR R-410A 62 655 / 1444 Flare / Brazed LIQUID 12.7 / 1 /2 15.9 / 5 /8 15.9 / 5 /8 15.9 / 5 /8 15.9 / 5 /8 28.6 / 1 1 /8 28.6 / 1 1 /8 28.6 / 1 1 /8 28.6 / 1 1 /8 34.9 / 1 3 /4 14.8 / 32.6 18.0 / 39.7 19.6 / 43.2 21.5 / 47.4 22.8 / 50.3-197,896 58,000 221,780 65,000 A5MDS 220B - 197,896 58,000 17,700 380-415 / 3 / 50 R-410A 62 590 / 1301 Flare / Brazed A5MDS 240BR - 218,368 64,000 242,252 71,000 A5MDS 240B - - 218,368 64,000 19,800 380-415 / 3 / 50 R-410A 62 600 / 1323 Flare / Brazed A5MDS-BR POER SOURCE REFRIGERANT TYPE AIR FLO SOUND PRESSURE LEVEL UNIT EIGHT NOMINAL TOTAL INPUT POER NOMINAL TOTAL INPUT POER MASTER UNIT+SLAVE UNIT A5MDS 360BR A5MDS 180BRM + A5MDS 180BRS 255,900 272,960 290,020 303,668 320,728 75,000 80,000 85,000 89,000 94,000 279,784 296,844 324,140 341,200 361,672 82,000 87,000 95,000 100,000 106,000 COOLING 22,600 24,200 25,800 27,400 29,000 HEATING 21,300 23,200 24,700 25,700 27,600 MASTER UNIT+SLAVE UNIT HI-FAN LO-FAN A5MDS 360B A5MDS 180BM + A5MDS 180BS 255,900 272,960 290,020 303,668 320,728 75,000 80,000 85,000 89,000 94,000 22,600 24,200 25,800 27,400 29,000 380-415 / 3 / 50 380-415 / 3 / 50 380-415 / 3 / 50 380-415 / 3 / 50 380-415 / 3 / 50 l/s / cfm l/s / cfm A5MDS 280BR A5MDS 120BRM + A5MDS 160BRS A5MDS 280B A5MDS 120BM + A5MDS 160BS R-410A 3056 + 3333 / 6474 + 7063 1528 + 2083 / 3237 + 4414 A5MDS 300BR A5MDS 120BRM + A5MDS 180BRS A5MDS 300B A5MDS 120BM + A5MDS 180BS R-410A 3056 + 3472 / 6474 + 7357 1528 + 2222 / 3237 + 4708 A5MDS 320BR A5MDS 180BRM + A5MDS 140BRS A5MDS 320B A5MDS 180BM + A5MDS 140BS A5MDS 340BR A5MDS 180BRM + A5MDS 160BRS A5MDS 340B A5MDS 180BM + A5MDS 160BS db(a) 62 62 63 63 63 1840 / 72.4 1840 / 72.4 1840 / 72.4 1840 / 72.4 1840 / 72.4 IDTH 2290 / 90.2 2290 / 90.2 2590 / 102.0 2590 / 102.0 2590 / 102.0 840 / 33.0 840 / 33.0 840 / 33.0 840 / 33.0 840 / 33.0 R-410A 665 / 1466 675 / 1488 720 / 1587 730 / 1609 740 / 1631 TYPE (LIQUID/) Flare / Brazed Flare / Brazed Flare / Brazed Flare / Brazed Flare / Brazed PIPE LIQUID 15.9 / 19.1 / 3 /4 CONNECTION 5 /8 15.9 / 5 /8 15.9 / 3 /4 19.1 / 3 /4 34.9 / 1 3 /4 34.9 / 1 3 /4 34.9 / 1 3 /4 34.9 / 1 3 /4 34.9 / 1 3 /4 REFRIGERANT CHARGE 24.0 / 52.9 30.0 / 66.1 32.0 / 92.6 34.0 / 75.0 34.0 / 75.0 R-410A 3472 + 3333 / 7357 + 7063 2222 + 2083 / 4708 + 4414 R-410A 3472 + 3333 / 7357 + 7063 2222 + 2083 / 4708 + 4414 3472 x 2 / 3753 x 2 2222 x 2 / 4708 x 2 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVEL ARE ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT THE MACHINE AND 1.42m ABOVE THE MACHINE BASE. 5) THE VALUE OF REFRIGERANT CHARGE IS THE REFRIGERANT CHARGED IN THE BEFORE LEAVING FACTORY. THIS CHARGE DOES NOT INCLUDE THE AMOUNT NEEDED FOR EXTENDED PIPING. R-410A - 2

A5MDS-BR NOMINAL TOTAL INPUT POER COOLING HEATING NOMINAL TOTAL INPUT POER POER SOURCE MASTER UNIT+SLAVE UNIT REFRIGERANT TYPE HI-FAN AIR FLO LO-FAN SOUND PRESSURE LEVEL IDTH UNIT EIGHT PIPE CONNECTION REFRIGERANT CHARGE MASTER UNIT+SLAVE UNIT TYPE (LIQUID/) LIQUID l/s / cfm l/s / cfm db(a) A5MDS 380BR A5MDS 240BRM + A5MDS 140BRS 348,024 102,000 385,556 113,000 31,100 29,400 A5MDS 380B A5MDS 240BM + A5MDS 140BS 348,024 102,000 31,100 380-415 / 3 / 50 R410a 3056 x 2 + 3333 / 6474 x 2 + 7063 1528 x 2 + 2083 / 3237 x 2 + 4414 64 1840 / 72.4 3290 / 129.5 840 / 33.0 950 / 2094 Flare / Brazed 19.1 / 3 /4 41.3 / 1 5 /8 38.0 / 83.4 A5MDS 400BR A5MDS 240BRM + A5MDS 160BRS 361,672 106,000 402,616 118,000 32,700 30,400 A5MDS 400B A5MDS 240BM + A5MDS 160BS 361,672 106,000 32,700 380-415 / 3 / 50 R410a 3056 x 2 + 3333 / 6474 x 2 + 7063 1528 x 2 + 2083 / 3237 x 2 + 4414 65 1840 / 72.4 3290 / 129.5 840 / 33.0 960 / 2116 Flare / Brazed 19.1 / 3 /4 41.3 / 1 5 /8 40.0 / 88.2 A5MDS 420BR A5MDS 240BRM + A5MDS 180BRS 378,732 111,000 423,088 124,000 34,300 32,300 A5MDS 420B A5MDS 240BM + A5MDS 180BS 378,732 111,000 34,300 380-415 / 3 / 50 R410a 3056 x 2 + 3472 / 6474 x 2 + 7357 1528 x 2 + 2083 / 3237 x 2 + 4708 65 1840 / 72.4 3290 / 129.5 840 / 33.0 970 / 2138 Flare / Brazed 19.1 / 3 /4 41.3 / 1 5 /8 42.0 / 92.6 A5MDS 440BR A5MDS 240BRM + A5MDS 200BRS 399,204 117,000 443,560 130,000 36,000 33,200 A5MDS 440B A5MDS 240BM + A5MDS 200BS 399,204 117,000 36,000 380-415 / 3 / 50 R410a 3056 x 4 / 6474 x 4 1528 x 4 / 3237 x 4 65 1840 / 72.4 3990 / 129.5 840 / 33.0 1190 / 2624 Flare / Brazed 19.1 / 3 /4 41.3 / 1 5 /8 44.0 / 97.0 A5MDS-BR NOMINAL TOTAL INPUT POER NOMINAL TOTAL INPUT POER POER SOURCE REFRIGERANT TYPE MASTER UNIT+SLAVE UNIT COOLING HEATING HI-FAN AIR FLO LO-FAN SOUND PRESSURE LEVEL IDTH UNIT EIGHT PIPE CONNECTION REFRIGERANT CHARGE MASTER UNIT+SLAVE UNIT TYPE (LIQUID/) LIQUID l/s / cfm l/s / cfm db(a) A5MDS 460BR A5MDS 240BRM + A5MDS 220BRS 416,264 122,000 464,032 136,000 37,500 35,400 A5MDS 460B A5MDS 240BM + A5MDS 220BS 416,264 122,000 37,500 380-415 / 3 / 50 R410a 3056 x 4 / 6474 x 4 1528 x 4 / 3237 x 4 65 1840 / 72.4 3990 / 129.5 840 / 33.0 1190 / 2624 Flare / Brazed 19.1 / 3 /4 41.3 / 1 5 /8 46.0 / 101.4 A5MDS 480BR A5MDS 240BRM + A5MDS 240BRS 436,736 128,000 484,504 142,000 39,600 37,000 A5MDS 480B A5MDS 240BM + A5MDS 240BS 436,736 128,000 39,600 380-415 / 3 / 50 R410a 3056 x 4 / 6474 x 4 1528 x 4 / 3237 x 4 65 1840 / 72.4 3990 / 129.5 840 / 33.0 1200 / 2646 Flare / Brazed 19.1 / 3 /4 41.3 / 1 5 /8 48.0 / 105.8 A5MDS 500BR A5MDS 250BRM + A5MDS 250BRS 457,208 134,000 504,976 148,000 41,800 39,000 A5MDS 500B A5MDS 250BM + A5MDS 250BS 457,208 134,000 41,800 380-415 / 3 / 50 R410a 3056 x 4 / 6474 x 4 1528 x 4 / 3237 x 4 65 1840 / 72.4 3990 / 129.5 840 / 33.0 1220 / 2690 Flare / Brazed 19.1 / 3 /4 41.3 / 1 5 /8 50.0 / 110.2 NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVEL ARE ACCORDING TO JIS B 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT THE MACHINE AND 1.42m ABOVE THE MACHINE BASE. 5) THE VALUE OF REFRIGERANT CHARGE IS THE REFRIGERANT CHARGED IN THE BEFORE LEAVING FACTORY. THIS CHARGE DOES NOT INCLUDE THE AMOUNT NEEDED FOR EXTENDED PIPING. R410A - 3

R410A Indoor Specifications A5MD-G INDOOR A5MD 09G A5MD 10G A5MD 15G 8500 9600 12300 2500 2800 3600 9600 10900 13600 2800 3200 4000 NOMINAL TOTAL INPUT POER POER SOURCE 24 26 29 220-240/1/50 HIGH l/s / cfm 130 / 275 142 / 300 163 / 345 AIR FLO MEDIUM l/s / cfm 106 / 225 118 / 250 135 / 285 LO l/s / cfm 83 / 175 94 / 200 104 / 220 SOUND PRESSURE LEVEL (H/M/L) IDTH dba 40 / 35 / 29 39 / 34 / 28 42 / 36 / 29 260 / 10.2 799 / 31.5 899 / 35.4 198 / 7.8 UNIT EIGHT 10/22.05 12/26.46 TYPE FLARE VALVE LIQUID 6.4 / 1/4 9.5 / 3/8 12.7 / 1/2 A5MD-G INDOOR A5MD 20G A5MD 25G NOMINAL TOTAL INPUT POER 19100 22200 5600 6500 21500 25200 6300 47 7400 66 POER SOURCE 220-240/1/50 HIGH l/s / cfm 231 / 490 397 / 630 AIR FLO MEDIUM l/s / cfm 193 / 410 231 / 490 LO l/s / cfm 160 / 340 208 / 440 SOUND PRESSURE LEVEL (H/M/L) IDTH dba 43 / 40 / 35 49 / 44 / 42 304 / 12.0 1062 / 41.8 222 / 8.7 UNIT EIGHT TYPE LIQUID 12.7 / 1/2 16 / 35.27 FLARE VALVE NOTE : 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS C 9612 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1m IN FRONT AND 0.8m BELO THE UNIT. 6.4 / 1/4 15.9 / 5/8 R410A - 4

A5CKD-A INDOOR NOMINAL TOTAL INPUT POER POER SOURCE AIR FLO HIGH MEDIUM SOUND PRESSURE LEVEL (H/M/L) ( ) - ITH PANEL EIGHT (UNIT + PANEL) LO IDTH TYPE LIQUID dba A5CKD 20A A5CKD 25A A5CKD 30A A5CKD 40A A5CKD 50A 19100 22200 30700 38200 47800 5600 6500 9000 11200 14000 21500 25200 34100 42700 54600 6300 7400 10000 12500 16000 35 45 60 83 120 349 / 740 368 / 780 220-240/1/50 415 / 880 467 / 990 491 / 1040 297 / 630 311 / 660 349 / 740 406 / 860 448 / 950 283 / 600 283 / 600 321 / 680 359 / 760 411 / 870 42 / 39 / 37 45 / 42 / 40 49 / 45 / 43 51 / 48 / 46 53 / 52 / 50 335 (378) / 13.2 (14.9) 820 (930) / 32.2 (36.6) 820 (930) / 32.2 (36.6) 31 + 4 / 68.3 + 8.8 32 + 4 / 70.5 + 8.8 35 + 4 / 77.2 + 8.8 38 + 4 / 83.8 + 8.8 40 + 4 / 88.2 + 8.8 FLARE VALVE 6.4 / 1/4 6.4 / 1/4 9.5 / 3/8 9.5 / 3/8 9.5 / 3/8 12.7 / 1/2 15.9 / 5/8 15.9 / 5/8 15.9 / 5/8 15.9 / 5/8 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) FOR A5CKD 20/025 A, SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS C 9612 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1.4m BELO FASCIA. FOR A5CKD 30/040/050 A, SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS C 8615 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1.5m BELO FASCIA. A5CKD-C INDOOR A5CKD 10C A5CKD 15C A5CKD 20C 9600 12300 19100 2800 3600 5600 10900 13600 21500 3200 4000 6300 NOMINAL TOTAL INPUT POER 16 18 22 POER SOURCE 220-240 / 1 / 50 HIGH 189 / 400 194 / 410 212 / 450 AIR FLO MEDIUM 184 / 390 184 / 390 203 / 430 LO 175 / 370 170 / 360 194 / 410 SOUND PRESSURE LEVEL (H/M/L) ( ) - ITH PANEL IDTH dba 44 / 43 / 42 44 / 42 / 41 47 / 46 / 44 250 (295) / 9.8 (11.6) 570 (640) / 22.4 (25.2) 570 (640) / 22.4 (25.2) UNIT EIGHT (UNIT + PANEL) 22 + 2 / 48.5 + 4.4 23.2 / 50.7 + 4.4 23 + 2 / 50.7 + 4.4 TYPE LIQUID FLARE VALVE FLARE VALVE 6.4 / 1/4 9.5 / 3/8 12.7 / 1/2 12.7 / 1/2 1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER ITHOUT PRIOR NOTICE. 3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELO : a) COOLING - 27 C DB / 19 C B INDOOR AND 35 C DB / 24 C B OUTDOOR b) HEATING - 20 C DB INDOOR AND 7 C DB / 6 C B OUTDOOR 4) SOUND PRESSURE LEVELS ARE MEASURED IN AN ANECHOIC CHAMBER, ACCORDING TO JIS C 9612 STANDARD. POSITION OF THE MEASUREMENT POINT IS 1.4m BELO FASCIA. R-410A - 5