Radiant Warm Wall Compact Incubator Reduced Oxygen Incubator Automatic Water-Jacketed Incubator, stacked For more than 45 years, Lab-Line has been on the cutting edge of incubator development. Not only did Lab-Line develop the first radiant warm wall Incubator, the first microprocessor-based system, and the first menu-driven control system, but we offer the Large Capacity Automatic Incubator industry s widest selection of Incubator models. Choose from Water- or Air- Jacketed designs, with Flo-Thru or Automatic control systems. All Lab-Line feature bright finish stainless steel interiors and shelves, silicone door gaskets, and Automatic and fan shut-off when the door is opened. For Air-Jacketed Automatic... 87 Water-Jacketed Automatic.. 88 ACCIS Water-Jacketed... 89 90 Compact Automatic... 91 Radiant Warm Wall Compact 9 2 Flo-Thru Water-Jacketed.. 93 Air-Jacketed Flo-Thru... 94 Large Capacity Automatic... 95 Large Capacity Flo-Thru... 96
Exclusive DECONTAM cycle on TC sensor models set temperature to 100 C for 12 hours Security password protection only authorized users can change set points Exclusive SMARTGAS system for faster recovery rates and more accurate control Model 495 230/0V models are CE certified Air-Jacketed Automatic Microprocessor temperature control from slightly above ambient to 60 C with thermal conductivity sensor; slightly above ambient to 55 C with infrared sensor with ±0.1 C control, ±0.25 C uniformity concentration from 0 20% with ±0.1% control Easy to read LED display scans between actual temperature and % level Temperature adjustable heated door keeps inner glass door free of condensation for improved viewing of cultures Independent hydraulic high limit thermostat protects cultures in case of microprocessor system failure Audible and visual alarms indicate temperature deviations of ±1 C or more, concentration deviations of 1% or greater, or when incubator door has been left open for more than five minutes Keypad programming for fast, easy adjustment of parameters Built-in RS232 port for output of temperature and data Corrosion-resistant polished stainless steel chamber features rounded corners for easy cleaning Six adjustable non-tip perforated shelves included Shelves and supports are easily removed and reinstalled without tools for complete decontamination and easier cleaning Shelves hold approximately twenty-two 3 1 2" (8.9 cm) petri dishes or fourteen 3 1 2" 6 1 2" (8.9 16.5 cm) culture flasks Durable stainless steel exterior construction with smooth enamel finish Dual chamber models come with separate, independent control systems TC IR Sensor Sensor cu. ft. W" x D" x H" W" x D" x H" lbs. lbs. Model Model Volts Hz Amps Watts (<) (cm) (cm) (kg) (kg) 490 495 120 60 7.1 Single 6.2 8 x 25 x 33 850 200 5 490-1 495-1 230/0 50 3.5 (176) (63 x 64 x 84) (91) (111) 492 497 120 60 14.2 Side-by-Side 49 4 x 25 x 33 (125 x 64 x 84) 492-1 497-1 230/0 50 7.1 12.4 400 490 494 499 120 60 14.2 1700 (352) Stacked (181) (222) 5 8 x 25 x 66 (63 x 64 x 168) 494-1 499-1 230/0 50 7.1
Accurate, programmable microprocessor control of temperature and Exclusive SMART GAS system for improved control Security password protection only authorized users can change set points 230/0V models CE certified Model 460 Water-Jacketed Automatic Microprocessor temperature control from slightly above ambient to 60 C with thermal conductivity sensor; slightly above ambient to 55 C with infrared sensor ±0.1 C control, ±0.25 C uniformity concentration from 0 20%, ±0.1% control Easy to read LED display scans between actual temperature and % level Temperature adjustable heated door keeps inner glass door free of condensation for improved viewing of cultures Independent hydraulic high limit thermostat protects cultures in case of microprocessor system failure Keypad programming for fast, easy adjustment of parameters Built-in RS232 port for output of temperature and data Corrosion-resistant polished stainless steel chamber Six adjustable non-tip perforated shelves included Shelves and supports are easily removed and reinstalled without tools for complete decontamination and easier cleaning Shelves hold approximately twenty-two 3 1 2" (8.9 cm) petri dishes or fourteen 3 1 2" 6 1 2" (8.9 16.5 cm) culture flasks Audible and visual alarms indicate temperature deviations of ±1 C or more, concentration deviations of 1% or greater, or when incubator door has been left open for more than five minutes Durable stainless steel exterior construction with smooth enamel finish TC IR Sensor Sensor cu. ft. W" x D" x H" W" x D" x H" lbs. lbs. Model Model Volts Hz Amps Watts (<) (cm) (cm) (kg) (kg) 460 465 120 60 6.3 Single 6.2 750 8 x 25 x 33 210 230 460-1 465-1 230/0 50 3.1 (176) (63 x 64 x 84) (95) (104) 462 467 120 60 12.5 Side-by-Side 49 4 x 25 x 33 (125 x 64 x 84) 462-1 467-1 230/0 50 6.3 12.4 420 460 1500 464 469 120 60 12.5 (352) Stacked (191) (209) 8 x 25 x 66 (63 x 64 x 168) 464-1 469-1 230/0 50 6.3
Digital microprocessor control of all features from to outer door heater Exclusive SMART G A S system provides accurate, trouble-free control Self-diagnostics perform continual system checks to maintain stable incubation environment Model 370 CE certified month warranty Control Panel ACCIS Water-Jacketed Lab-Line s ACCIS Advanced Computer Controlled Incubator System Water-Jacketed provide the ultimate in microprocessor-controlled precision combined with user-friendly programming and ease of use. The control panel features an ergonomic design with access to all programmable features. These units are designed for efficiency, long life, and low maintenance. Temperature control from slightly above ambient to 55 C with ±0.1 C control and ±0.25 uniformity (using platinum RTD sensor) concentration from 0 20% with ±0.1% control and fast recovery after door is opened Self-calibrating infrared sensor Available in single, vertical, and side-by-side See page 97 for Reduced Oxygen configurations Password protection provides security locks out unauthorized access to control menus Alpha-numeric 80-character vacuum fluorescent display for input of all incubation parameters Constant self-checks of critical system parameters help guarantee a uniform, worry-free incubation environment Temperature-adjustable outer door heater keeps inner glass door free of condensation, provides clear viewing of cultures RS232 port captures data to a printer or computer link user selection of BAUD rate and transmission
User-friendly start up menu directly accesses adjustable parameters Easy-to-use four key touchpad interfaces to dialogbased programming High and low limits can be set to 0.5 C or 0.5% Warning on screen and via RS232 connection notifies user of power failure and actual duration of outage flow and fan automatically shut off when door is opened, for greater control and sample protection Individual incubation cycles can be personalized with 18-character titles 6.2 cu. ft. (176 <) seamless, corrosion-resistant stainless steel chamber Six adjustable, non-tip shelves come standard with incubator Shelves hold approximately twenty-two 3 1 2" (8.9 cm) petri dishes or fourteen 3 1 2" 6 1 2" (8.9 16.5 cm) culture flasks Durable stainless steel exterior construction Silicone door gaskets for tight, reliable seal Bi-directional in-line filter keeps chamber atmosphere clean Independent twin sets of programmable relay contacts are available on rear panel connect to any central alarm system for remote alarm monitoring Available autochange automatically switches Model 370 cu. ft. W"x D"x H" W"x D"x H" lbs. lbs. Model Volts Hz Amps Watts (<) (cm) (cm) (kg) (kg) 370 120 60 6.3 Single 6.2 750 8 x 25 x 33 230 325 (176) (63 x 64 x 84) (104) (147) 370-1 230/0 50 3.1 372 120 60 12.5 Side-by-Side 22 x 22 x 26 372-1 230/0 50 6.3 2000 12.4 375 120 60 12.5 (352) Stacked 375-1 230/0 50 6.3 49 1 4 x 25 x 33 (125 x 63 x 84) 5 8 x 25 x 66 (63 x 63 x 168) 460 650 (209) (295)
Precise microprocessor control of temperature Exclusive SMART GAS system for accurate control and faster recovery Compact size conserves valuable lab space Thermal conductivity sensor Model 314 month warranty Compact Automatic Temperature range 5 above ambient to 60 C with ±0.1 C control, ±0.25 C uniformity concentration from 0 20%, ±0.1% control Easy to read LED display of temperature and Nonvolatile memory retains set points in the event of power interruption or failure Convenient soft-touch keypad makes adjustment of parameters fast and easy Built-in RS232 port for output of temperature and data Sample port on control panel for testing with FYRITE analyzer Temperature adjustable heated door keeps inner glass door free of condensation for improved viewing of cultures Audible and visual alarms indicate temperature deviations of more than ±1 C, concentration deviations of 1% or greater from setpoint, and when incubator door is left open for more than five minutes Model 314 features corrosion-resistant seamless stainless steel chamber interior Model 316 features fungus- and bacteria-resistant seamless copper chamber interior Two shelves are supplied standard; chambers can accommodate five cu ft W"x D"x H" W"x D"x H" lbs. lbs. Model Volts Hz Amps Watts (<) (cm) (cm) (kg) (kg) 314 120 60 1.7 200 Stainless Steel 22.5 x 18 x 19 50 70 (57 x 46 x 48) (23) (32) 314-1 230/0 50 0.8 200 Stainless Steel 22.5 x 18 x 19 50 70 (57 x 46 x 48) (23) (32) 316 120 60 1.7 200 Copper 22.5 x 18 x 19 50 70 (57 x 46 x 48) (23) (32) 316-1 230/0 50 0.8 200 Copper 22.5 x 18 x 19 50 70 (57 x 46 x 48) (23) (32)
The economical compact alternative where space is at a premium Choose stainless steel or copper-plated chamber interior month warranty Model 317 Radiant Warm Wall Compact Hydraulic thermostat controls temperature from slightly above ambient to 60 C with ±0.5 C control and ±1.0 C uniformity Tempered glass inner door permits viewing of cultures Convenient front panel LED temperature display Durable, corrosion-resistant stainless steel interior and exterior construction Independent flowmeters control air and tension Model 315 features seamless, crevice-free, corrosion-resistant stainless steel chamber interior Model 317 features fungus- and bacteria-resistant copper chamber interior Two adjustable wire shelves are supplied standard; chambers can hold five Shelves hold approximately nine 3 1 2" (8.9 cm) petri dishes or SPECIFICATIONS Temperature Range Slightly above ambient to 60 C Control ±0.5 C Uniformity ±1.0 C Tension 0 to 20% Control Flowmeter cu ft W"x D"x H" W"x D"x H" lbs. lbs. Model Volts Hz Amps Watts (<) (cm) (cm) (kg) (kg) 315 120 60 1.7 200 Stainless Steel 23 2 x 17 x 15 50 70 (60 x 43 x 38) (23) (32) 315-1 230/0 50 0.8 200 Stainless Steel 23 2 x 17 x 15 50 70 (60 x 43 x 38) (23) (32) 317 120 60 1.7 200 Copper 23 2 x 17 x 15 50 70 (60 x 43 x 38) (23) (32) 317-1 230/0 50 0.8 200 Copper 23 2 x 17 x 15 50 70 (60 x 43 x 38) (23) (32)
Air circulation system moves heat and throughout chamber without disturbing cell cultures eliminates stratification Exclusive KWIK-INJECT feature provides fast recovery after door is opened Available in single, vertical, and side-by-side configurations for best use of space month warranty Model 340 Flo-Thru Water-Jacketed Lab-Line s dependable, economical Flo-Thru Water- Jacketed are designed to deliver uniform temperature and distribution to create a growth environment for tissue cultures, plants, cells, viruses and related organisms. 5.1 cu. ft. (144 <) crevice-free heavy-gauge stainless steel interior Durable steel exterior with baked enamel finish for easy cleaning Heaters located on outside rear wall and bottom of water jacket provide uniform heat distribution Separate flowmeters control air and concentration Heated outer door prevents condensation build-up on inner glass door Inner glass door allows samples to be viewed without disturbing chamber atmosphere Sample port on control panel to take readings without opening door Hydraulic over-temperature thermostat protects samples Warning lights alert user if water level in jacket is cu. ft. W"x D"x H" W"x D"x H" lbs. lbs. Model Volts Hz Amps Watts (<) (cm) (cm) (kg) (kg) 340 120 60 6.3 Single 6.2 750 8 x 25 x 33 210 230 (176) (63 x 64 x 84) (95) (104) 340-1 0 50 3.1 342 120 60 12.5 Side-by-Side 342-1 0 50 6.3 1500 12.4 345 120 60 12.5 (352) Stacked 345-1 0 50 6.3 49 1 4 x 25 x 33 (125 x 64 x 84) 5 8 x 25 x 66 (63 x 64 x 168) 420 460 (191) (209)
Designed to provide reliability, uniformity, and economy Single, vertically-stacked, and side-by-side models available to multiply your incubation capacity 120V models are UL listed and CSA certified month warranty Model 320 Air-Jacketed Flo-Thru Exclusive KWIK-INJECT feature speeds recovery after door is opened Dual thermostat system controls temperature from slightly above ambient to 60 C with ±0.5 C control and ±0.25 C uniformity Velvet flow air system eliminates stratification without disturbing cell cultures Separate flowmeters control air and concentration Heated outer door prevents condensation on inner glass door for improved visibility Sample port provides monitoring without opening door Durable, corrosion-resistant stainless steel interior and exterior construction Six shelves provided standard SPECIFICATIONS Temperature Range Slightly above ambient to 60 C Control ±0.5 C Uniformity ±0.25 C Tension 0 to 20% Control Flowmeter cu. ft. W"x D"x H" W"x D"x H" lbs. lbs. Model Volts Hz Amps Watts (<) (cm) (cm) (kg) (kg) 320 120 60 6.3 Single 6.2 750 8 x 25 x 33 210 230 (176) (63 x 64 x 84) (95) (104) 320-1 230/0 50 3.1 322 120 60 12.5 Side-by-Side 322-1 230/0 50 6.3 1500 12.4 325 120 60 12.5 (351) Stacked 325-1 230/0 50 6.3 49 1 4 x 25 x 33 308 408 (125 x 63 x 84) (140) (185) 5 8 x 25 x 66 312 364 (63 x 64 x 168) (141) (165)
Available in 10.4 cu. ft. (295 <), 28 cu. ft. (793 <), and 34 cu. ft. (963 <) chamber volume models Accurate microprocessor control of temperature and concentration Thermal conductivity sensor month warranty Large Capacity Automatic Exclusive SMART GAS system for faster recovery rates and better control Temperature range from slightly above ambient to 60 C with ±0.1 C control and ±0.25 C uniformity concentration from 0 20% with ±0.1% control Radiant warm wall heat provides excellent temperature control and uniformity Velvet flow air circulation system eliminates stratification without harming cell cultures Easy to read LED display of temperature and tension Audible alarm notifies user of temperature deviations ±1 C and deviations greater than 1% from setpoint, other than due to door openings Six polished stainless steel shelves come standard shelves and brackets remove easily for cleaning Optional autochange switches automatically from empty to full cylinders Model 391 features exclusive DECONTAM cycle 100 C temperature for up to 10 hours and tempered glass inner door with heated outer door for improved culture viewing Model 393 provides built-in humidity control with ±3% accuracy from 20% above ambient to 98% Model 397 has full-size double pane glass door with heated inner pane to eliminate condensation and FACTORY INSTALLED OPTIONS FOR 393 SERIES Model L GW GW2 Description Left Hand Door Model 397 Glass Window 12" x 48" (30 x 122 cm) Glass Window 30" x 60" (76 x 152 cm) cu. ft. W"x D"x H" W"x D"x H" lbs. lbs. Model Volts* Amps Watts (<) (cm) (cm) (kg) (kg) 391 120 11.3 391-1 230/0 5.6 10.4 30 x 20 x 30 32.5 x 25.5 x 45 315 340 1350 391-2** 120 11.3 (295) (76 x 51 x 76) (83 x 65 x 114) (143) (154) 391-3** 230/0 5.6 393 120 11.7 393-1 230/0 5.8 34 36 x 25 x 65 42 x 35 x 91 660 1020 1400 393-2** 120 11.7 (963) (91 x 64 x 165) (107 x 89 x 231) (299) (463) 393-3** 230/0 5.8 397 120 11.7 28 28.5 x 26.75 x 63.5 33.5 x 28.75 x 76.5 625 900 1400 397-1 230/0 5.8 (793) (72.4 x 67.9 x 161.3) (85.1 x 73.1 x 194.3) (283) (408) *All models rated 50/60 Hz **Includes factory-installed recorder
Specially designed for laboratories that handle a high volume of work Produces more cell cultures economically CSA certified month warranty Large Capacity Flo-Thru 34 cu. ft. (963 <) stainless steel chamber Adjustable KWIK-INJECT function injects into the chamber when door is opened and closed provides better recovery and a more stable incubation environment Hydraulic thermostats control temperature from slightly above ambient to 65 C with ±0.5 C uniformity and control Flowmeter controls concentration from 0 20% Velvet flow air circulation system prevents stratification Large, easy-to-read LED temperature display Audible alarm notifies user if setpoint temperature is exceeded All electrical components protected by circuit breakers, not fuses Corrosion-resistant stainless steel interior construction Exterior construction is durable heavy gauge steel with baked enamel finish Six stainless steel shelves included standard FACTORY INSTALLED OPTIONS FOR 399 SERIES cu. ft. W"x D"x H" W"x D"x H" lbs. lbs. Model Volts* Amps Watts (<) (cm) (cm) (kg) (kg) Suffix H L P GW Description Humidity Control Left Hand Door Built-in Air Supply Model 399 Glass Window 12" x 48" (30 x 122 cm) 399 120 11.7 399-1 230/0 5.8 *All models rated 50/60 Hz 1400 34.0 36 x 25 x 65 42 x 35 x 91 700 980 (963) (91 x 64 x 165) (107 x 89 x 231) (318) (445)
Accurate microprocessor control of all major parameters Produces below-ambient oxygen levels to simulate in-vivo conditions Exclusive SMART GAS system provides faster recovery rates and exceptional control Available in single chamber, stacked, and side-by-side configurations CE certified Reduced Oxygen Incubator The Lab-Line Reduced Oxygen are particularly ideal for research and testing applications involving tissue cells. Since ambient atmospheric oxygen levels are far higher than those normally experienced by most tissue cells, the toxic effect of oxygen and cell-damaging oxygen radicals can have adverse results on research outcomes. By decreasing oxygen levels 5 10%, in-vivo cell incubation conditions can be simulated. Microprocessor provides precision control of: from 0 20%, ±0.1% accuracy (with infrared sensor) O 2 from 0 21%, ±0.1% accuracy Model 480 See page 106 for Anaerobic Chambers temperature from slightly above ambient to 55 C, ±0.25 C uniformity Easy-to-use touch keypad programming of all incubator functions 5.1 cu. ft. (144 <) seamless stainless steel chamber has rounded corners for easy cleaning Six adjustable, non-tip shelves come standard Chamber parameters and alarms shown on 80- character fluorescent display Separate LED display of O 2 levels Heated outer door prevents condensation on inner glass door for improved visibility Water jacket plus forced air convection provide cu. ft. W"x D"x H" W"x D"x H" lbs. lbs. Model Volts Hz Amps Watts (<) (cm) (cm) (kg) (kg) 480 120 60 8.3 Single 6.2 1000 8 x 25 x 33 230 325 (176) (63 x 64 x 84) (104) (147) 480-1 230/0 50 4.2 482 120 60 16.7 Side-by-Side 482-1 230/0 50 8.3 1500 12.4 484 120 60 16.7 (352) Stacked 484-1 230/0 50 8.3 49 1 4 x 25 x 33 (125 x 64 x 84) 5 8 x 25 x 66 (63 x 64 x 168) 460 650 (209) (295)
Model 338 Model 370- ACCESSORIES Model Description 336 Autochange, 120V/60 Hz 336-1 Autochange, 0V/50 Hz 370-8 Humidity pan for Model 370 370- Printer for Models 314, 316, 370, 397, 460, 480, 490 337 Two stage regulator 338 FYRITE analyzer kit 339 Replacement Fyrite solution 397-6 Stainless steel shelf for Model 397 370-6 Stainless steel shelf for Models 340, 370 490-4 Stand for 460/490 series 490-5 Mobile cart for 460/490 series 490-6 Stainless steel shelf for Models 460, 480, 490 490-7 Stand with mobile cart for 460/490 series 490-9 HEPA Filter for 460/490 series 315-6 Stainless steel shelf for Models 314, 315 317-6 Copper shelf for Models 316, 317 391-6 Stainless steel shelf for Model 391 393-6 Stainless steel shelf for Model 393 399-6 Stainless steel shelf for Model 399 Model 337 Model 336 Model 370-6 Model 397-6 Model 315-6