When tested in accordance with Standard AS/NZS 60 For more information and to compare products, refer to: Ifo Sign Toilet Increased Height P Trap AS1428.1:2009 White freestanding toilet suite with 460mm seat height, with cistern as resevior and backrest. FEATURES Free Standing WC 460 mm seat height (excluding seat) 800 mm finished wall to front of pan (based on 200 mm off set) 95 degree cistern to pan angle Cistern complies with all angles thrust test (for AS1428.1:2009) of 1100 N for backrest requirements Pan load rated to 0 kg Seamless cistern offering back and side transfer support Increased foot print for enhanced stability Allows for undisturbed coving seal Tested to comply with 90% of commonly used Australian shower commode chairs WELS 4 star rated (4.5/3L Flush) Fully glazed on back and inside rim to avoid bacteria growth Patented Fresh WC blue stick technology enabled for increased infection control All pans are to be fixed using high grade anti-bacterial silicone of appropriate colour and where exposed mounting holes are provided, 316 stainless steel screws are to be used. Provides 100% consistency and reliability as combined wc and back support - no additional backrest needed to meet requirements of AS1428.1:2009** IFO6872 ** Refer to AS1428.1:2009 for height and spacial requirements *Seat not included Product Code IFO6872 - IFO - Toilet AS1428.1:2009 set up - P Trap OPTIONS Pressalit Hard Seat - anthracite grey IFO554112-BD1999 IFO Sign Raised Flush Button IFO98308 Floor Anchor IFO98015 Fresh Sticks - 10 packets of 5 sticks IFO94568 Images show Raised Height Button and Pressalit Care Toilet Seats - these are not supplied as standard, but can be ordered separately - see options. The more stars the more water efficient A joint government and industry program Licence No. 0058 4.5 litres per full flush Version: Sep 15 3 litres per half flush 3.3 litres per average flush www.waterrating.gov.au AS 1172.1 AS 1172.2 WMKA21026 IAPMO R&T Certifikate Nr. 2004-SKM-AE-825 ISO 101:2004 Certifikate Nr. 2004-SKM-AQ-2054 ISO 9001:2000 Call 1300 369 273 www.enware.com.au/ifo Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 02 8536 00 Fax: 02 8556 55
Ifo Sign Toilet Increased Height P Trap AS1428.1-2009 IFO6872 Back View Side View 355 650 95 900 95 0-455 460 Ø100 190 100 1100 N all angles thrust test compliant 0 kg load rating compliant Version: Sep 15 Call 1300 369 273 www.enware.com.au/ifo Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 02 8536 00 Fax: 02 8556 55
Ifö Sign/Sign Fix/Sign Art 39-12-3 6832, 68, 6860, 6861, 6862, 6870, 6872, 6873, 6893, 6894 WC-Unit 6832 68 6860 6861 6862 6870 6872 6873 6893 6894 95281 www.ifosanitar.com Assembly instructions
Spare parts 2 3 96660 91782 4 5 6 98302 98303 98304 18 96782 18 96769 1 96763 7 8 98305 98300 9 98307 15 96767 10 11 98308 98309 16 96768 12 98310 13 98312 17 96765 14 98313 26 96781 26 96772 19 90613 19 90610 20 96766 96771 22 25 96783 25 96764 96783 23 96770 24 91930 27 98960 27 96760 28 91966 29 96773 31 98951 30 21 96761 21 96759 91967 för 6893/6894,6832 21 96777 21 96784 32 90532 33 90536 34 90533 35 90441 36 90531 37 90439 38 90437 39 90442 90535 41 90534 42 98949 43 94752 44 94751 45 98381 46 98015 47 98030 2
Thank you for choosing Ifö Sign. You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit. To guarantee correct and reliable installation of this product we urge you to follow the installation instructions. Enware cannot accept liability for damage that occurs as a result of faulty installation. WC connections The water connection to the cistern inlet is a 1/2" BSP male. Looking from the front of the pan, it is located on the right hand side, on the bottom of cistern. See Image 1 See page 29 for connection dimensions and other dimensions on WC units. Aavailable as options: Waterproof Floor Mounting Waterproof floor mounting IFO98015 - installation - see image 7. Waterproof floor mounting IFO98030 - installation - see image 8. Bonding/Siliconing This WC unit is suitable for bonding/siliconing, see images 11-15. The method applies to installation of WC units using elastic silicone joint. First clean the floor to obtain a dry and grease-f ree surface. Do not use the WC before the silicone has cured. If the WC unit is bonded / siliconed to the floor, the supplied blind cover plugs (IFO94752) must be used in the screw holes on the WC unit. For toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports, it is recommended that the toilet pan be fixed to the floor using stainless steel pan screws (supplied - IFO98381) together with a silicone bed, or fixed using a water proof floor mounting bracket (IFO98015). The floor surface should be as flat and level as possible, to ensure stability. Fixing the toilet pan with only the silicone seal is not considered to be an adequate method of fixing. Dosing This WC is prepared for the Fresh WC function, with a hygienic dosing of a tablet through the flush button. The tablet is placed inside the flush armature by opening the flush button and releasing the tablet in the blue cover screw, as illustrated in images 16-17. Depending on the content of the tablet, it produces a fresh odour, cleaning effect on the whole bowl and colour. This solution differs from traditional odour and cleaning blocks that are suspended from the rim of the bowl, by perfectly rinsing the entire bowl and retaining full flushing effect. Ifo Fresh Sticks are available from Enware. Product code IFO94568-10 packets of 5 sticks. Ifö Sign 6860, 6861 You have chosen the optimum standard WC unit with built-in S-trap. It can usually be installed as quickly and easily, and in the same situations, as WC units with traditional open S-traps. Remember that the cover must be positioned before installation, see image.6 Ifö Sign 6832, 6862, 6872 These WC units are designed for connection to waste in walls P-trap. 9
Ifö Sign 6893, 6894 You get more free floor space with a wall-hung style WC unit. It facilitates easier cleaning of the bathroom floor. 30 Each increment is 1 litre, adjustable from 2-5 litres, or from 2-3 litres for model 6832. Flush button Ifo Sign WC units are supplied with: unit by turning it a quarter turn clockwise and then lifting 31 32 Flush volume - Polished chrome flush button (IFO98303) Optional: Raised Chrome Button (IFO98308) button, cut away the catch on the lever arm as shown in 33 Removal of Flush Button and cistern cover so that the rear catch is installed facing forwards Remove the flush button, cover mounting and cover as illustrated in images 16-22. Servicing Cistern Components If the WC unit runs - first check that the outlet valve's outlet seal washer is not damaged. If it is, replace the outlet washer (IFO96765), as illustrated in images 23-25. Then check that the inlet valve closes correctly. If it does not, replace the inlet valve (IFO96766) as illustrated in images 26-28. The lever arm to the inlet float is normally installed on the lower float setting for optimum water flow. This setting can handle a water pressre of 10 bars. In the event of the WC unit running at high water pressures, the lever arm can be moved to the upper setting and then handles a maximum water pressure of 12 bars. See image 29. Note: Inlet Water Pressure Max. 500 kpa (AS 3500.1) Reinstalling Reinstall in reverse order. The screws for the cistern mounting must be tightened alternately to a maximum torque of 2.5 Nm as illustrated in image 35. The cover screw must be tightened to a maximum torque of 1.0 Nm as illustrated in image 37. Maintenance advice and cleaning WC units, bidets and wash basins have a glazed surface. Glazed surfaces are easy to keep clean and are resistant against most chemicals. Clean regularly to prevent cleaning problems. Use normal cleaning agents. Clean regularly to prevent cleaning problems. However, use hot water and soap and wipe dry with a cloth. This is because cleaning agents for porcelain are not intended for chrome parts/plastics and can risk cracking This WC-unit is test approved according to NT VVS 120 If necessary See images 30-32. Cleaning utensils, which contain abrasive agents, such as wire wool and green scouring pads, must not be used. Strong acids, e.g. hydrochloric acid and sulphuric acid and strong alkalines, e.g. caustic soda should not be used. Dripping taps and running WC units must be repaired immediately. For repair or to purchase spare parts, contact your local plumbing contractor or plumbing centre. For more information, contact Enware. If the toilet is subject to freezing temperatures, the WC,. 24 23 0.3-0.4 litres of anti-freeze into the water trap and cover evaporation. 10
Spare parts Pos Designation Enware Part Code 1. Cover screw IFO96763 2. IFO96660 3. 4. 5. IFO98303 6. 7. 8. 9. IFO98307 10. IFO98308 11. 12. 13. 14. 15. Bridge assembly IFO96767 16. IFO96768 17. Outlet valve seal washer IFO96765 18. Outlet valve assembly IFO96769 Outlet valve assembly, 6832 IFO96782 19. Cistern cover, white IFO90610 Cistern cover, 6832, white IFO90613 20. Inlet valve assembly IFO96766 21. Inlet pipe assembly IFO96761 Inlet pipe assembly, Sign 6893, 6894 IFO96759 Inlet pipe assembly, Sign 6832 IFO96784 22. IFO96771 23. IFO96770 24. Catch IFO91930 25. O-ring frame, 6832 IFO96783 26. Frame assembly IFO96772 Frame assembly, 6832 IFO96781 27. Inner cistern with gasket IFO98951 Inner cistern with gasket, 6832 IFO98960 28. Seal cistern bowl IFO96760 29. Water distributor 30. Water distributor for 6893/6894/6832 IFO91967 31. Gasket bowl IFO96773 32. Bowl with built-in S-trap, white, 6860 IFO90532 33. Bowl with built-in S-trap, white, raised, 6861 IFO90536 34. Bowl universal trap, white, 6862 IFO90533 35. Bowl universal trap, white, raised, 6872 IFO90441 36. 37. 38. Bowl, white for 6893 IFO90437 39.. 41. 42. Cistern mounting IFO98949 43. White plugs x4 IFO94752 44. 45. Floor screws + white caps + white plugs IFO98381 46. Floor mounting IFO98015 47. Floor mounting, bonding IFO98030 11
1 6 7 8 24
* IMPORTANT NOTE for toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports, it is recommended that the toilet pan be fixed to the floor using stainless steel pan screws (supplied - IFO98381) together with a silicone bed, or fixed using a water proof floor mounting bracket (IFO98015). The floor surface should be as flat and level as possible, to ensure stability. Fixing the toilet pan with only the silicone seal is not considered to be an adequate method of fixing. 11 12 GB / Make sure the surface of the tiles is clean, dry and free from grease. 13 14 15 16 2 1 17 18 25
19 20 21 22 23 2 24 1 1 25 26 26
27 28 29 30 Max 12 bar Max 10 bar 2 liter 5 liter 31 32 2 3 liter 1 8 liter 27
33 34 35 Max 2,5 Nm 1 3 2 4 36 37 Max 1,0 Nm 28
6860 6861 355 650 355 650 95 860 c/c Sitsbulthål 155 95 900 c/c Sitsbulthå l 155 360-415 420 0-455 460 70 20 70 20 Ø 102 Ø 102 6862 355 650 95 860 c/c Sitsbulthå l 155 360-415 420 Ø 102 190 120 6872 6893 355 650 355 660 0-455 95 900 460 c/c Sitsbulthål 155 Ø 102 190 120 max 95 min. 230 105 290 760 100 325 150 c/c Sitsbulthål 155 100 20 75 Ø 102 30
Ifö Sign, Sign Fix 6860, 6861, 6862, 6870, 6872, 6873 Part Code IFO98381 x 4 Z 3 (pozidriv) x 4 GB /For simple access to spare parts, save these instructions! tu viegli piekļūt rezerves daļām! Installatør/Installer/ Paigaldaja/ Instaliavo/ Uzstādī tājs Dato/Date/Kuupäev/ Data /Datums