SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ZHONGJIAN NANFANG TESTING CO., LTD. 1 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao an District, Shenzhen, Guangdong, People s Republic of China Bruce Zhang Phone: +86-755-2311 8282 Email: bruce.zhang@ccis-cb.com ELECTRICAL Valid to: November 30, 2019 Certificate Number: 4346.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following electrical tests: Test Technology: Radiated and Conducted Emissions Test Method(s): ANSI C63.4:2014; ANSI C63.10:2013; ANSI C63.17:2013; FCC MP-5:1986; FCC Part 15B, C, D, E, F; FCC Part 18; ICES-001; ICES-003; ICES-005; ICES-006; EN 55011; EN 55013; EN 55014-1; EN 55015; EN 55022; EN 55032; CISPR 11; AS/NZS CISPR 11; CISPR 13; AS/NZS CISPR 13; CISPR 14-1; AS/NZS CISPR 14-1; CISPR 15; AS/NZS CISPR 15; CISPR22; AS/NZS CISPR 22; CISPR 32; HKTA 1007 Immunity ESD EN 61000-4-2; IEC 61000-4-2 EFT/Burst EN 61000-4-4; IEC 61000-4-4 Surge EN 61000-4-5; IEC 61000-4-5 Conducted Immunity EN 61000-4-6; IEC 61000-4-6 VDI EN 61000-4-11; IEC 61000-4-11 Magnetic Field EN 61000-4-8; IEC 61000-4-8 Generic and Product Family Standards IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4; IEC 61547; IEC 61326-1; EN 61000-6-1; EN 61000-6-2; EN 61000-6-3; EN 61000-6-4; EN 55024; CISPR 24; EN 61547; EN 61326-1; CISPR 24; EN 55014-2; EN 301 489-1; EN 301 489-3; EN 301 489-5; EN 301 489-6; EN 301 489-7; EN 301 489-8; EN 301 489-9; EN 301 489-17; EN 301 489-19; EN 301 489-23; EN 301 489-24; EN 301 489-34; EN 301 489-50; EN 301 489-52; EN 301 489-53 (A2LA Cert. No. 4346.01) Revised 10/23/2018 Page 1 of 5

Test Technology: Test Method(s): Product Safety IEC 60065, EN 60065, AS/NZS 60065, UL 60065 (Excluding clauses 6, 8.18, 8.22, 10.1, 12.3, 12.5, 13.3.4, 13.4, 13.5, 13.6, 13.7, 14.1, 14.2, 14.4, 14.5, 14.6, 14.7, 14.12, 18, Annex H); EN 60950-1, IEC 60950-1, UL 60950-1, AS/NZS 60950.1 (Excluding clauses 1.5, 2.8, 2.10.3.2, 2.10.4.2, 2.10.6, 2.10.7, 2.10.8, 2.10.12, 4.2.8, 4.3.10, 4.3.11, 4.3.12, 4.3.13, Annex A); EN 62368-1, IEC 62368-1, UL 62368-1, AS/NZS 62368.1 (Excluding clauses 5.4.1.10.2, 5.4.4.6.5, 7.3, 10.4, 10.5, 10.6, Annex C, Annex G1, G2, G3, G8, G9, G12, G13, G14, G15, G16, Annex J, Annex S, Annex K, Annex U) Radio Communications Intentional and Unintentional Radiators 47 CFR Part 2; 47 CFR Part 15B (using ANSI C63.4:2014); 47 CFR Part 15C, F (using ANSI C63.10:2013); 47 CFR Part 15D (using ANSI C63.17:2013); 47 CFR Part 15E (using ANSI C63.10:2013 or FCC KDB 905462 D02 (v01)); 47 CFR Parts 20, 22, 24, 25, 27, 74, 90, 95, 97, 101; ANSI C63.4; ANSI C63.10; ANSI C63.26; ANSI/TIA 603-C/D/E; TIA-102.CAAA-D; FCC KDB 935210 D03 (v04); FCC KDB 935210 D04 (v02); FCC KDB 935210 D05 (v01r01); RSS-102; RSS-112; RSS-130; RSS-131; RSS-132; RSS-133; RSS-134; RSS-139; RSS-195; RSS-197; RSS-199; RSS-210; RSS-213; RSS-216; RSS-247; RSS-310; RSS-GEN; AS/NZS 4771; AS/NZS 4268; AS/NZS 4295; EN 300 328; EN 301 893; EN 300 220-1; EN 300 220-2; EN 300 220-3-1; EN 300 220-3-2; EN 300220-4; EN 300 220; EN 300 440-1; EN 300 440-2; EN 300 440; EN 300 113; EN 300 330-1; EN 300 330-2; EN 300 330; EN 302 291-1; EN 302 291-2; EN 302 208-1; EN 302 208-2; EN 302 208; EN 303 413; EN 303 417; EN 301 357-1; EN 301357-2; EN 301 357; EN 303 609; EN 300 442-1; EN 300 442-2; EN 302 502; EN 300 609-4; EN 301 511; EN 301 908-1; EN 301 908-2; EN 301 908-11; EN 301 908-13; EN 301 908-15; EN 300 086-1; EN 300 086-2; EN 300 086; EN 300 296-1; EN 300 296-2; EN 300 296; EN 301 406; HKCA 1020; HKCA 1039; HKCA 1042; HKCA 1048; HKCA 1046; HKCA 1034; HKCA 1043; AS/ACIF S042.3:2005; AS/CA S042.4:2015; ARIB T-33; ARIB T-66; ARIB T-71; Article 2, Paragraph 1 of the Ordinance: Item 19, Item 19-2, Item 19-2-2, Item 19-2-3, Item 19-3, Item 19-3-2, Item 11-3, Item 11-7, Item 11-19; IMDA TS WBA; IMDA TS GMPCS; IMDA TS UWB; IMDA TS CT-CTS; IMDA TS SRD; IMDA TS CMT; IMDA TS CBS; IMDA RS AR; IMDA TS LMR; IMDA TS WSD; LP0001; LP0002; PLMN01; PLMN05; (A2LA Cert. No. 4346.01) Revised 10/23/2018 Page 2 of 5

Test Technology: Radio Communications Intentional and Unintentional Radiators (cont d) Human Exposure to RF Electromagnetic Specific Absorption Rate (SAR) Test Method(s): PLMN007; PLMN008; RTTE01 EN 50360; EN 50371; EN 62311; EN 62479; EN 50364; EN 50566; EN 50385; 47 CFR Part 2, FCC OET 65, Supplement C; Australian Communications Authority, Radio communications (Electromagnetic Radiation, Human Exposure) Standard 2003; IEC 62209-1; RSS-102; IEC 62209-2; EN 62209-1; EN 62209-2; IEEE Std.C95.1; IEEE Std. C95.3; IEEE 1528:2003 +A1; IEEC 1528a:2005; IEEE Std. 1528:2013; AS/NZS 2772.1; AS/NZS 2772.2 On the following products and materials: Telecommunications Terminal Equipment (TTE), Network Equipment, Information Technology Equipment (ITE), Medical Electrical Equipment (A2LA Cert. No. 4346.01) Revised 10/23/2018 Page 3 of 5

Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.1 1 : Rule Subpart/Technology Test Method Maximum Frequency MHz Unintentional Radiators Part 15B ANSI C63.4:2014 40000 Industrial, Scientific, and Medical Equipment Part 18 FCC MP-5 (February 1986) 40000 Intentional Radiators Part 15C ANSI C63.10:2013 40000 Unlicensed Personal Communication Systems Devices Part 15D ANSI C63.17:2013 40000 U-NII without DFS Intentional Radiators Part 15E ANSI C63.10:2013 40000 U-NII with DFS Intentional Radiators Part 15E FCC KDB 905462 D02 (v01) 40000 (A2LA Cert. No. 4346.01) Revised 10/23/2018 Page 4 of 5

Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.1 1 : Rule Subpart/Technology Test Method Maximum Frequency MHz UWB Intentional Radiators Part 15F ANSI C63.10:2013 40000 Commercial Mobile Services (FCC Licensed Radio Service Equipment) Parts 22 (cellular), 24, 25 (non-microwave), and 27 General Mobile Radio Services (FCC Licensed Radio Service Equipment) Parts 22 (non-cellular), 90 (non-microwave), 95, 97, and 101 (non-microwave) ANSI/TIA-603-E; TIA-102.CAAA-E 40000 ANSI/TIA-603-E; TIA-102.CAAA-E 40000 Microwave and Millimeter Bands Radio Services Parts 25, 74, 90 (90Y, 90Z, DSRC), and 101 ANSI/TIA-603-E; TIA-102.CAAA-E 40000 RF Exposure Devices Subject to SAR Requirements IEEE Std 1528:2013 3000 Signal Boosters Part 20 (Wideband Consumer Signal Boosters, Provider-specific signal boosters, and Industrial Signal Boosters) FCC KDB 935210 D03 (v04); FCC KDB 935210 D04 (v02); FCC KDB 935210 D05 (v01r01) 40000 1 Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the FCC website (https://apps.fcc.gov/oetcf/eas/) for a listing of FCC approved laboratories. (A2LA Cert. No. 4346.01) Revised 10/23/2018 Page 5 of 5

Accredited Laboratory A2LA has accredited SHENZHEN ZHONGJIAN NANFANG TESTING CO., LTD. Shenzhen, People s Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 10 th day of October 2017. President and CEO For the Accreditation Council Certificate Number 4346.01 Valid to November 30, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.