All you need is the concrete Concrete products... from site prep to fi nishing www.wackerneuson.com
Wacker Neuson has the innovative products you need to get your next concrete job done efficiently and economically. All you need is the concrete... Wacker Neuson products will handle the rest. SITE PREP Excavators Wacker Neuson s compact excavators are performance proven machines that will out-dig and outlast the competition. Ranging in class from 1.5 to 9.5 tons, the line spans everything from a mini-sized unit to machines with high output engines and zero tail swing options that out perform digging tasks in the tightest confines to wheeled excavators for ultimate mobility. These units offer the best service access, large and comfortable cabs/canopy options and a full line of attachments for greater versatility and function. Compaction Quality concrete depends on excellent ellent base preparation. Wacker Neuson has a full line of vibratory rammers, single direction and reversible vibratory plates and vibratory rollers all ideally suited for the compaction of level sublayers. Before pouring footings or slabs, turn to the industry s most diverse line of compaction equipment to get the job done efficiently and economically. Hydronic Heaters Hydronic surface heaters allow you to work year round. This product line is designed to quickly, easily and economically thaw frozen ground, prevent frost, preheat sub-base se and forms, cure concrete and provide temporary heat during cold weather. Five models with a variety of accessories are available allowing contractors to thaw up to 18,000 sq. ft. of frozen ground at one-foot per day.
REINFORCEMENT PREP Rebar Cutters Rebar cutters offer efficient and easy cutting and bending of reinforced steel. The cost per cut is lower when using electric-hydraulic equipment compared with alternative cutting techniques, plus the operator is not exposed to noise or sparks. These rebar cutters offer clean and quick cuts for applications with different rebar diameters bringing versatility and high productivity to any job site. Rebar Tiers Automatic rebar tiers make it possible to tie up to 1000 knots per hour. When compared to conventional hand tying, this mechanical unit delivers increased speed and efficiency. With outstanding ergonomics, this rebar r tier also improves productivity on the job site. The operator can work in a comfortable upright position, eliminating back and overall body strain. PLACEMENT Dumpers Articulated wheel dumpers are quickly becoming the bulk material mover of choice on jobsites. These versatile machines feature dumping from the front or the bucket can be rotated 90 degrees es in both directions to dump from either side. This makes them ideal for placing concrete, especially in difficult to reach areas. Featuring payload capacities ranging from 2,204 lbs. to 13,280 lbs. and liquid capacities from 0.36 yd³ to 2.5 yd³ these units are easier on the landscape than trucks.
CONSOLIDATION Vibrators Improve the quality of your concrete with a Wacker Neuson internal or external vibrator. From the popular flex-shaft models which offer a variety of head, motor and shaft combinations, to the high frequency motor-in-head units with integrated inverters to external vibration systems for on-site or pre-cast applications, there is an innovative unit to easily and cost effectively get the best concrete results. Wet Screeds A wet screed can fit the demands of every job site with a variety of blade lengths for quick and accurate strike-off of concrete slabs with or without the support of grade stakes. The unique twin handle system is fully height adjustable offering maximum operator comfort and isolators reduce vibration to the operator. CURING Hydronic Heaters Use the same heaters that thawed the ground to cure your slab or walls. Wacker Neuson s hydronic surface heaters will l accelerate the curing process by raising the concrete to an ideal temperature of 65-75 F, greatly reducing costs and delays. Air Heaters A large variety of indirect-fired air heaters create an ideal environment that allows contractors rs to work year round. Small portable units to larger heavy duty units will safely maintain indoor work areas at a optimal temperature e for curing and other work.
FINISHING Trowels When it comes time to finish a slab, Wacker Neuson has the right trowel to get the job done. Edging A compact 24-inch edging trowel eliminates hand work and offers better floating and finishing capabilities along wall lines and obstacles. Walk-behind From the occasional finisher to the large concrete professional, Wacker Neuson has a walk-behind trowel to meet your job site needs. A variety of 36-inch and 48-inch walk-behind trowels are available with standard, high horsepower engines and variable speed transmission systems. All walk-behind trowels offer a patented system to minimize a runaway handle and are dynamically balanced for nearly effortless operation. Ride-on The 36-inch, 48-inch and 60-inch ride-on trowel models offer quality results, high productivity and operator comfort. Wacker Neuson offers both mechanical and electronic power steer units that are ergonomically designed for excellent maneuverability and better floating for high production finishing jobs. The 60-inch adds hydraulic drive with the electric hydraulic steering for the ultimate professional finishing machine.
DEMOLITION Saws Wacker Neuson offers a full line of walk-behind and portable cut-off saws to fit every application. Compact and lightweight floor saws offer outstanding performance, maximum cutting speed, smooth operation and excellent maneuverability. Portable cut-off saws are designed for fast cutting and feature a durable design for easy operation and optimum productivity. Breakers Electric and gasoline breakers offer maximum performance. The electronic units feature an air percussion system that offers high single stroke energy with minimal machine weight. The gasoline unit is powered by the Wacker Neuson engineered 2-cycle engine that was designed to withstand tough construction applications. All units are designed with the lowest hand-arm vibration in their weight class for long hours of operation. Rotary/demolition hammers mers Lightweight electric rotary and demolition on hammers are designed for maximum efficiency and productivity. The combination of extreme durability, low service requirements plus powerful impact performance provides top results and excellent operating efficiency. A builts motor in electronic frequency inverter with brushless allows some units to deliver three-phase power from an everyday single-phase current source. Your Wacker Neuson dealer is ready to serve you with superior products, parts, service, maintenance and support that will keep you working productively at your jobsite. Look no further than Wacker Neuson for equipment and job site consulting for all phases of the construction process. 0985613/April-2012/Layout Goes Studio/Printing Marek Group www.wackerneuson.comeuson.com