Energy efficient lighting control

Energy efficient lighting control 2016/2017

Brighter ighting With intelligent sensors, Aura ight takes lighting control to the next level. The smart components and systems enable us to simplify the installation process and customise the lighting control installation to the needs of both users and premises. The fundamental concept upon which our systems are based is de-centralized lighting control. By splitting the installation into clusters of smaller lighting groups, each group can be both controlled individually, as well as communicate with other groups. ot only does this give users a better experience, but it also significantly reduces energy consumption. It is also a cost effective solution for both purchaser and installer. Intelligent lighting controls in combination with an efficient luminaire and light source, can enable users to reduce their energy consumption by up to 80%. We know about the the challenges you face and can help you select the best possible combination of luminaires, light sources and intelligent lighting control. Upgrading to sustainable energy efficient lighting is easy, just give us a call: +46 (0)8 564 881 40. Contents Full range of high-quality sensors 4 How do I choose the right sensor? 7 Solution examples 8 Getting lighting control right 20 Aura ight PIR sensors 21 Aura ight HF sensors 35 Aura ight wireless A10 sensors 45 Aura ight KX sensors 52 General accessories 60 A10 wireless sensor components 64 Settings and commissioning 67 Aura ight International group companies 71 Bright idea: ighting control from Aura ight can help you reduce your energy consumption by up to 80%. 2

3

Full range of high-quality sensors Aura ight offers sensors for a wide range of applications, from parking garages and logistic centers to office and retail applications. Our sensors are available for both wired and wireless installations. PIR - Infrared technology Passive Infrared (PIR) sensors detect variations of thermal radiation in a given range. For use both indoor and outdoor, these sensors activate upon any sudden change in heat/ temperature, thereby detecting human motion or the motion of other living creatures that emit heat. Upon detection, sensors connected to lighting can be set to turn on/off or dim the lights automatically. HF - Microwave technology High-frequency (HF) microwave sensors send out signals that are reflected back to the sensor. The sensor inteprets differences in the reflected signal as movement. More sensitive than PIR technology, HF motion detection technology instantly responds to the smallest movement. This makes HF sensors ideal for presence detection in areas such as offices and classrooms, where there are small movements. HF sensors detect presence through glass, wood and thin walls. This ensures that there are no undetected areas behind for example partitions or furniture. HF sensors are also able to detect all types of vehicles, making it an excellent choice where it is important to monitor access to open spaces, such as those in warehouses, parking- and logistics areas. HF sensors are virtually insensitive to dirt, thereby offering a distinct advantage over PIR sensors, which experience impaired operation in dusty or dirty environments due to accumulation of airborne particles on the optical lens. KX - bus system Some of our sensors are available in KX. This is a bus system that connects the facility s technical components such as lighting, heating, cooling, ventilation etc. KX is an open, standardized communication system (ISO / IEC 14543-3, E 50090). All of the KX-certified products are fully compatible and can be used together regardless of manufacturer. PIR - Infrared technology HF - Microwave technology Infrared detection technology (PIR) is a passive detection of heat sources. Changes of thermal radiations are interpreted as movements. This detection technology is perfect for bigger movements of humans. HF sensor technology sends out a signal and interprets changes on reflected signal as movement. The HF sensors are more sensitive and detects all type of movement. This makes them ideal for detection of humans and vehicles. The HF waves can detect through walls, windows and doors, which is something that needs to be considered when chosing the right sensor for the application. 4

A10 range - wireless sensors Designed to control lighting, heating, ventilation and air conditioning (HVAC), the A10 wireless system can operate either as a stand-alone control system or as an integral part of a new or existing lighting control system. What makes the A10 unique is that the connection between sensor and receiver is wireless. This eliminates the need for expensive wiring. It also provides great flexibility because there are no limitations on increasing or decreasing the sensor system as required. This is especially advantageous for large areas that require flexibility to adapt to changing space requirements. Typical applications include open-plan offices, sports halls and other large commercial premises. The A10 is also ideal for cultural buildings, religious institutions, notable landmarks and other similar structures where aesthetic requirements and technical complexities make it impossible to lay wires or cables to control lighting. Wireless lighting control All radio frequency (RF) components need power (AC 230V / 50Hz) and these are often easily available in building installations. Only the wired control connection for diming (DAI /1-10V) and switching will be replaced by RF. A10 technology is an innovative control system for professional lighting control. Depending on conditions the operation range differs on building, installation environments and other RF application in same area. The professional RF transmission technology ensures a reliable functionality once the system is set up. The mesh network will also broadcast information of different lighting groups. A10 a wireless alternative The innovative coding system protects other wireless applications on same frequnecy range. The coding system can also be used to group or re-group sensors and receivers for light scene arrangements. Sub local Code ocal - Code Area - Code Building - Code 868 MHz broadband European harmonized frequency range (SRD- band) Short range device with impulse information RF output power < 10mW Operation range up to 30m (open area) Patent A10 technology compatible to all A10 components 4-step coded RF transmission All components are transceiver (transmitter and receiver in one) Mesh-etwork Topography All devices have the same coding for plug and play. All components which should talk to each other need the same coding. Different codes can easily be grouped. ocal Code: 1 Area Code: 1 And / Or Building Code: 1 5

6 Bright idea: KX sensors enable you to connect the facility s technical components, such as lighting, heating, and ventilation.

How do I choose the right sensor? Mini PIR Sensor Art. 760115 High bay PIR Sensor Art. 760128 Universal PIR Sensor (FM) Art. 760139 Switching arge Range PIR Sensor Art. 760109 Universal PIR Sensor (SM) Art. 760067 Wall PIR Sensor Art. 760152 Big movements (PIR) Wired / 230V Dimming Mini PIR Sensor DD- Art. 760116 AD- Art. 760117 High bay PIR Sensor DD- Art. 760126 AD- Art. 760127 Universal PIR Sensor (SM) DD- Art. 760066 AD- Art. 760065 arge Range PIR Sensor DD- Art. 760089 AD- Art. 760111 Universal PIR Sensor (FM) DD- Art. 760138 AD- Art. 760140 Switching Universal PIR Sensor (FM) Art. 760160 arge Range PIR Sensor Art. 760073 Wireless Indoor application Dimming Universal PIR Sensor (FM) DD- Art. 760161 AD- Art. 760162 arge Range PIR Sensor DD- Art. 760074 AD- Art. 760075 Bus KX KX: arge Range PIR Sensor Art. 760194 KX: Universal PIR Sensor (SM) Art. 760102 Switching Mini HF Sensor Art. 760104 Universal HF Sensor (FM) 1 CH- Art. 760123 2 CH - Art. 760185 Universal HF Sensor (SM) Art. 760373 Small movements (HF) Wired / 230V Dimming Corridor HF Sensor Art. See page 40 Mini HF Sensor DD- Art. 760106 AD- Art. 760107 Wall HF Sensor Art. See page 42 Universal HF Sensor (FM) DD- Art. 760122 AD- Art. 760143 Universal HF Sensor (SM) DD - Art. 760374 AD - Art. 760375 Corridor HF Sensor DD- Art. See page 40 AD- Art. See page 40 Switching Corridor Sensor Art. See page 50 Wireless Dimming Corridor HF Sensor DD- Art. See page 50 AD- Art. See page 50 Bus KX KX: Universal HF Sensor (FM) Art. 760196 KX: Corridor HF Sensor Art. See page 59 7

ighting control in offices The challenge An office consists of different types of areas like open-plan cubicles, fixed offices, meeting rooms and corridors. One of the challenges when planning lighting control in an office is to ensure that even small movements are detected. The sensors must also be adequately placed so that there are no blind-spots, and unwanted detection needs to be minimised. An efficient lighting control system for offices must also be flexible enough to adapt to changes in office space use over time. Sensors must ensure minimum lighting levels required for office work, but also be able to dim lighting to take full advantage of available natural light. In addition, sensors must be compatible with today s luminaires as well as those that will be used in the future. For optimal control with true presence detection, sensors must be equipped with two channels one to control HVAC systems and the other to control the lighting. The solution The Aura ight sensor range solves all of these office lighting challenges. A single sensor from Aura ight provides 100% presence detection for small office areas, such as a typical three-by-three-metre office module. The constant light stepless dimming function (daylight linking function) in all of our sensors ensure the required lux level, considering both available natural light as well as artificial light from the luminaires. Choices & recommendations It is important to consider client s requirements for dimmable office lighting. If dimming is required, then the next step is to determine which dimming technology, DSI/DAI or 1-10 V, that best suits the client needs. Aura ight offers a full range of both technologies. In installations with older non-dimmable luminaires we still recommend our dimming sensors, since this offers flexibility for dimming in the future, at a small additional cost. Our wireless A10 range is a great choice if you want to adapt the system to changes in office space without having to re-wire. A PIR sensor is preferred in areas with a lot of movement, for example cafeteria or corridor, while an HF sensor is the best solution for offices with less movements. For open office environments where partitions, furnitures and plants are used to separate work places, we recommend our HF sensors, since they detect presence behind such obstacles. 8

HF & PIR Universal Sensor Detection range PIR 360 o / Ø 7 m at ceiling height 2.8 m and HF 360 o / Ø 16 m Available in 1-10V, DAI, KX and A10 wireless versions Presence detection and daylight linking Invisible mounting due to low profile (3,7 mm) Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment PIR arge range Sensor Selectable detection area of 360/270/180/90 Available in on/off, 1-10V, DAI, KX and wireless A10 versions Presence or motion detection selectable Special designed lens for reliable detection of high ceilings Semi- and fully automatic function Detection range separation Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment Accessories UCDHS Art. 760136 Profi-handset For advanced programming of all functions of the Switcher, Dimmers and A10 range CD display for clear programming Settings can be saved as macros with guiding names DBB Art. 760132 Ceiling bracket, small Bracket for surface mounted installation Supplied with spacer ring with room for extra cabling when the sensor can t be flush mounted Remote control, user For recall of light scenes, on/off dim up & down function UHS7 Art. 760137 9

ighting control in industrial areas The challenge There are many different types of industrial environments. These may include production areas, warehouses, loading areas, assembly areas, corridors and office spaces. Most of the spaces are subject to the movement of people, rotating machinery, conveyor belts and small vehicles. Managing lighting in industrial environments calls for presence detection of both people moving in the spaces as well as the machinery and vehicles they operate. Other challenges in these types of environments are the high ceiling heights and that there are limited, or no natural light. Sensors must meet the required minimum lighting levels according to safety standards, and take advantage of any available natural light. An efficient lighting control system for industrial facilities must also be flexible enough to adapt to changes in the use of the facility over time. The solution The Aura ight sensor range solves all of these industrial lighting challenges. The constant light stepless dimming function (daylight linking function) in all of our sensors ensure the required lux level, considering both available natural light and artificial light from the luminaires. We offer a full range of both PIR and HF sensors for ceiling heights up to 15 meters. Both wired and wireless solutions are available depending on requirements and installation preferences. Choices & recommendations If a dimmable installation is preferred, the next step is to determine which dimming technology, DSI/DAI or 1-10V, that best suits the needs. Aura ight offers a full range of both technologies. In installations with older non-dimmable luminaires, we still recommend our dimming sensors, since this offers flexibility for dimming in the future, at a small additional cost. For presence detection of people in areas with machinery and equipment, we recommend the Aura ight s arge Range PIR sensors with remote control and mounting bracket. For warehouses, storage areas and corridors, we recommend the Aura Corridor HF sensor with remote control and mounting bracket. 10

PIR Universal Sensor Detection range 360 o / Ø 7 m at ceiling height 2.8 m Available in on/off, 1-10V, DAI or wireless A10 versions Presence detection and daylight linking Invisible mounting due to low profile (3.7 mm) Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment PIR arge Range Sensor Detection range: Ø 40 m at ceiling height 15 m and Ø 8 m at a ceiling height 3 m. Available in on/off, 1-10V, DAI or wireless A10 versions Presence detection and daylight linking Suitable for large operation range Semi- and fully automatic function Detection area separation Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment HF Corridor Sensor Detection range at 2.8 m is up to 30 X 6 m Presence detection and daylight linking Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Available versions: on/off, DAI, 1-10V and A10 Easy installation by factory setting and remote control adjustment Accessories UCDHS Art. 760136 Profi-handset For advanced programming of all functions of the Switcher, Dimmers and A10 range CD display for clear programming Settings can be saved as macros with guiding names MWS3A-DBB Art. 760133 Ceiling bracket, large Bracket only for Corridor Sensor Bracket for surface mounted installation Supplied with spacer ring with room for extra cabling when the sensor can t be flush mounted MWS3A-DBB-WBRKT Art. 760080 Wall bracket, large Bracket for Corridor Sensors DBB Art. 760132 Ceiling bracket, small Universal bracket Bracket for surface mounted installation Supplied with spacer ring with room for extra cabling when the sensor can t be flush mounted DBB-WBRKT Art. 760081 Wall bracket, small Universal bracket for all models except Corridor Sensor series Bracket for surface mounted installation 11

ighting control in warehouses The challenge Warehouse facilities are often large, and some parts of the areas are utilised more frequently than others. The main objective when planning lighting control in warehouses is to reduce the energy costs, without compromising safety. Challenges in these types of environments is the high ceiling height and that there is limited, or no natural light. Sensors must meet the minimum safety standards for lighting levels. An efficient lighting control system for warehouse facilities must also be flexible enough to adapt to changes in the use of the facility over time. It is important to consider issues regarding maintenance. Due to the relatively high level of dirt in a warehouse, a maintenance-free control system is recommended. In addition, it must be possible to turn on and adjust the sensors from a convenient distance on the warehouse floor. The solution The Aura ight sensor range solves all of these challenges. Our efficient lighting control systems ensure that aisles where people or vehicles are moving are properly lit, while reducing energy cost. The constant light stepless dimming function in all of our sensors ensures the required lux level. Both wired and wireless solutions are available depending on requirements and installation preferences. Choices & recommendations Warehouse operators often use the existing non-dimmable luminaires for as long as possible. In these installations we still recommend our dimming sensors, since this offers flexibility for dimming in the future, at a small additional cost. When a dimmable installation is preferred, the next step is to determine which dimming technology, DSI/DAI or 1-10V, that best suits the needs. Aura ight offers a full range of both technologies. All of our dimming sensors can be used to control the lighting in three steps. When presence is detected, an illuminance level of 300 lux one metre above the floor is required. When no presence is detected the lights are dimmed to a defined low level of, for example, 125 lux for a pre-set time. After this pre-set time the lighting is dimmed to a constant low level of for example 50 lux. This orientation light function is only possible with suitable luminaires. Please contact Aura ight for a list of approved luminaires. Aura ight offers a wide range of sensors for various installation heights. ISTAATIO HEIGHT DETECTIO AREA PRODUCT 8 m 16 x 6 m Corridor HF Sensor 15 m 5 x 5 m High bay PIR sensor 15 m Ø 40 m arge range PIR sensor 12

PIR arge range Sensor Detection range: Ø 40 m at ceiling height 15 m and Ø 8 m at a ceiling height 3 m Available in on/off, 1-10V, DAI or wireless A10 versions Presence detection and daylight linking Suitable for large operation range Semi- and fully automatic function Detection range separation Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment PIR High bay Sensor Detection range up to 5.1 x 5.1 m at ceiling height 15 m For high bay applications Available in on/off, 1-10V, DAI version Presence detection and daylight linking Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment HF Corridor Sensor Presence detection and daylight linking Detection range up to 30 m at mounting height 2.8 m Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning Available versions: on/off, DAI, 1-10V or A10 Factory preset for plug & play HF Wall Sensor Presence sensor for wall bracket installation Adjustable detection range up to 30 m Fully automatic function Remote controlled for professional commissioning Available versions: on/off Factory preset for plug & play Accessories UCDHS Art. 760136 Profi-Handset For advanced programming of all functions of the Switcher, Dimmers and A10 range CD display for clear programming Settings can be saved as macros with guiding names MWS3A-DBB Art. 760133 Ceiling bracket, large Bracket only for Corridor Sensor Bracket for surface mounted installation Supplied with spacer ring with room for extra cabling when the sensor can t be flush mounted MWS3A-DBB-WBRKT Art. 760080 Wall bracket, large Bracket for Corridor Sensors DBB Art. 760132 Ceiling bracket, small Universal bracket for all models except Corridor Sensor series Bracket for surface mounted installation Supplied with spacer ring with room for extra cabling when the sensor can t be flush mounted DBB-WBRKT Art. 760081 Wall bracket, small Universal bracket for all models except Corridor Sensor series Bracket for surface mounted installation 13

ighting control in cold areas The challenge Clearly the main challenge in cold areas is to deal with low temperatures. Standard sensors usually fail at -20 C due to damage to sensor components. Cold Area Sensors must therefore be able to control light in spaces where temperatures down to -30 C is the norm. Protecting the light sources is paramount in a cold area. It is important not to turn the lights on and off, since this significantly reduces the lifetime of the light sources. Another challenge in cold storage area lighting is humidity, which is created due to constant opening and closing of the storage room door. The moisture created from the mixture of warm and cold air can cause ice to form on the optical lens of the sensors. The solution The Aura ight sensor range for cold areas addresses all of these challenges. Our cold area sensors are developed and manufactured with special components designed to operate at temperatures below -20 C. To prevent humidity inside the cold storage area and subsequent icing of the sensor lenses, additional gaskets seal the sensor lens frame according to protection class IP65. The sensor lens has five separate PIR sensors to detect even small heat sources. Choices & recommendations Aura ight offers a special sensor for cold storage applications. This PIR Cold Area Sensor has been specially developed for cold areas. To provide a soft start for the light sources we recommend a dimmable solution with 1-10V or DAI controlled ballasts. This prolongs the lifetime of all types of light sources. 14

PIR Cold Area Sensor Designed for very low temperature (down to -30 C) Detection range Ø 40 m at ceiling height 15 m IP65 Outdoor application in protected installation Presence or motion detection selectable Special designed lens for reliable detection of high ceilings Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Accessories UCDHS Art. 760136 Profi-handset For advanced programming of all functions of the Switcher, Dimmers and A10 range CD display for clear programming Settings can be saved as macros with guiding names Ceiling bracket Bracket for Cold Area Sensors T30-IP65 Art. 760070 15

ighting control in parking areas The challenge ighting is a significant operating expense for parking areas. arge areas are lit up, often 24 hours per day, even in times of no motion. The main objective when planning lighting control in parking areas is to reduce energy costs, without compromising the sense of security. Sensors must meet the minimum lighting levels required according to safety standards, and take advantage of any available natural light. Managing lighting in parking areas calls for motion detection of both people moving as well as the vehicles they operate. Modern cars are very well insulated and when cold started they do not emit any heat which makes it impossible for a PIR sensor to sense the movement. Sensor placement is also a challenge in parking areas, where it is important to consider all possible flows of people and vehicles. The relatively high level of dirt and dust in a parking areas can result in costly maintenance if the wrong type of sensors are selected. Choices & recommendations Because many people feel a high level of insecurity in parking areas, it is important that no areas are completely dark, but rather left at a low lighting level when no presence is detected. We recommend dimmable luminaires and sensors in parking areas. All of our dimming sensors can be used to control the lighting in two or three steps. When presence is detected, an illuminance level of for example 100 lux is required. When no presence is detected, the lights are dimmed to a defined low level of, for example, 50 lux (depending on luminary system). HF sensors are virtually insensitive to dirt, thereby offering a distinct advantage over PIR sensors, which can be impaired in dusty or dirty environments due to accumulation of airborne particles on the optical lens. We therefore recommend HF sensors that are not sensitive to dust in these types of areas. The solution Aura HF sensors address all of these challenges for both visible and concealed sensor installations. The use of concealed installations is advantageous because the sensor is protected from accidental contact or damage. 16

HF Corridor Sensor Detection range up to 30 m at mounting height 2.8 m Presence detection and daylight linking Daylight linking function Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning Available in on/off, DAI, 1-10V, KX and wireless A10 version Factory preset for plug & play PIR arge range Sensor Detection range: Ø 40 m at ceiling height 15 m and Ø 8 m at a ceiling height 3 m Available in on/off, 1-10V, DAI, KX and wireless A10 versions Presence detection and daylight linking Suitable for large operation range Semi- and fully automatic function Detection range separation Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment Universal PIR sensor, Surface Mounted Detection range 360 o /Ø 7 m at ceiling height 2.8 m Available in on/off, 1-10V, DAI Presence detection and daylight linking Perfect solution for hard ceilings or limited built-in options Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment Accessories UCDHS Art. 760136 MWS3A-DBB Art. 760133 Profi-Handset For advanced programming of all functions of the Switcher, Dimmers and A10 range CD display for clear programming Settings can be saved as macros with guiding names Ceiling bracket, large Bracket only for Corridor Sensor Bracket for surface mounted installation Supplied with spacer ring with room for extra cabling when the sensor can t be flush mounted MWS3A-DBB-WBRKT Art. 760080 Wall bracket, large Bracket for Corridor Sensors DBB Art. 760132 Ceiling bracket, small Universal bracket for all models except Corridor Sensor series Bracket for surface mounted installation Supplied with spacer ring with room for extra cabling when the sensor can t be flush mounted DBB-WBRKT Art. 760081 Wall bracket, small Universal bracket for all models except Corridor Sensor series Bracket for surface mounted installation 17

ighting control in public restrooms The challenge Public restrooms pose unique lighting challenges due to variations in space and traffic. Standard toilet partitions generally comprise most of the space, subdividing the space into small zones. In many restrooms there are also no-detection zones, that have to be considered both when selecting sensor technology and placement. In addition, public restroom ceilings are made of hard drywall or plaster, which makes it difficult to install most sensors. The solution Aura HF sensors address all of these challenges and are available for both ceiling and wall installation. HF sensors are an excellent choice for public restrooms, because they detect the smallest of movements, even through partition walls and doors. The adjustable time delay feature of Aura ight s HF sensors provide maximum flexibility and helps you save energy. A shorter time delay provides greater energy savings, but may turn off the lights prematurely. A longer time delay ensures that the light will not turn off when people are still present. Choices & Recommendations Aura ight HF sensors are ideal for use in public restrooms as they detect even very small movements. We recommend the Universal HF Sensor. The IP44-rated Universal HF Sensor is available in three different versions: On/off, 1-10V DAI and A10. This sensor can be operated in fully automatic or semiautomatic mode. In fully automatic mode, the sensors automatically turn lighting on and off according to demand, whether the physical presence of people or the availability of natural light. In semi-automatic mode, lighting must be turned on manually but the sensors turns off the lighting automatically. 18

HF Wall Sensor Adjustable detection range up to 30 m Presence and motion sensor in one Fully automatic function Remote controlled for professional commissioning Available versions: on/off Factory Preset for plug & play HF Universal Sensor, Surface Mounted Detection range up to 16 m at mounting height 2.8 m ow convex profile, for nearly invisible installation Presence and motion sensor in one Daylight linking function Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning Available versions: on/off, DAI, 1-10V or A10 Factory Preset for plug & play PIR Wall Sensor, E-3003/4/5 Presence and motion sensor in one Detection range up to 5 m Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning for the dim version Available versions: on/off and conventional dimming Supplied with white front panel, bronze and brusched steel available as accessories Accessories Profi-Handset Bracket for surface mounted installation UCDHS Art. 760136 For advanced programming of all functions of the Switcher, Dimmers and A10 range CD display for clear programming Settings can be saved as macros with guiding names GIPB/RD Art. 760156 Bracket for wall sensors DBB Art. 760132 Ceiling bracket, small Universal bracket for all models except Corridor Sensor series Bracket for surface mounted installation Supplied with spacer ring with room for extra cabling when the sensor can t be flush mounted DBB-WBRKT Art. 760081 Wall bracket, small Universal bracket for all models except Corridor Sensor series Bracket for surface mounted installation 19

Getting lighting control right To ensure high quality lighting, be sure to adapt lighting to meet the needs of the actual space and the people using it. Whether lighting an open office landscape, warehouse, cold area, parking area or a combination of these spaces, Aura ight has the sensors for your needs. detection 360 Y Detection range 360 o. X is the range and Y is the ceiling height Class II means double insulation. o earth connection required X X:7m Y:2,8m CASS II detection range Detection range. X is the length and Y is width ow flammability materials X Y X:22m Y:6m ABS + PC/ABS The size of the cut out hole Max load regardless of light source is 10A 64mm 10A 230VAC +/ 10% 50Hz Power system CE All necessary certification for Europe existing +350C 100C Minimum and maximum ambient temperature 5.8GHz microwave frequency The microwave frequency where the product operate (only for HF sensors) 5-95% Humidity range AT system 868MHz radio frequency The radio frequency that the sensors operates (only for wireless A10 ) IP40 Degree of Ingress Protection. The first number indi cates the measure of protection against solids. The second number indicates the measure of protection against liquids KX Minus 300C KX - a bus system that connects the facility s technical components Sensor works in temperatures down to -30 o C Bright idea: Maximize energy efficiency by using a modern luminaire with a ED light source and a sensor. 20

PIR: UIVERSA SESOR, RECESSED PIR: Universal Sensor, Recessed early invisible sensor with large detection range for most applications This nearly invisible Universal PIR recessed sensor fulfills many type of lighting control needs in buildings with soft ceilings. The very flat lens design allows a big detection range of 40 m 2 which covers small offices, floors, locker & store rooms for example. This model is the universal answer for perfect lighting control in offices, hotels and public buildings. Detection range 360 o /Ø 7 m at ceiling height 2.8 m Available in on/off, 1-10V, DAI or wireless A10 versions Presence detection and daylight linking Invisible mounting due to low profile (3.7 mm) Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment detection 360 +350C Y X X:7m Y:2,8m 64mm 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A CE 21

PIR: UIVERSA SESOR, RECESSED DETECTIO RAGE 76 2.8 m 7 m 4 65 PRODUCT EBDSPIR EBDSPIR-PRM EBDSPIR-DD EBDSPIR-AD Article no. 760180 760139 760138 760140 EECTRICA DATA Sensor type PIR PIR PIR PIR Sensor model - On/off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 6 A 10 A 10 A 10 A Max. no. of ballasts 6 20 20 if only channel 10 2 is used. (Otherwise 10) IP class IP 40 IP 40 IP 40 IP 40 Power consumption 0,5 W 0,87 W 0,6 W 0,3 W passive Power consumption 0,6 W 0,89 W 0,8 W 0,7 W active Operation temperature -10 C- +35 C -10 C- +35 C -10 C- +35 C -10 C- +35 C FEATURES Detection range Ø: 7 m / h: 2,8 m height Ø: 7 m / h: 2,8 m height Ø: 7 m / h: 2,8 m height Ø: 7 m / h: 2,8 m height on/off, (non-floating contact) Channel 2 dim - - DAI/DSI 1-10V Push button input - Motion detection by default Presence detection by - setting Semi-automatic mode - Adjustable sensitivity - ux switching on & off Separate sensitivity for active & passive mode - Detection indication - Setting indication - Delay time, stepless 10 sec - 30 min 10 sec - 99 min 10 sec - 99 min separate/channel 10 sec - 99 min seperate/channel Dimmer memory (last manual setting) - - Corridor function - - Auto burn-in of - - fluorescent tubes SETTIG Control knob sensor - - - Remote control - UCDHS UCDHS UCDHS Remote control, user - UHS5 UHS5 UHS5 GEERA DATA Dimensions (Diameter/ depth mm) 76/65 76/65 76/65 76/65 Product weight (kg) 0,13 0,13 0,15 0,15 Colour White RA 9003 White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket DBB DBB DBB DBB Wall mounting bracket DBB-WBRKT DBB-WBRKT DBB-WBRKT DBB-WBRKT ACCESSORIES ` + - Channel 2 CEIIG BRACKET, SMA DBB ART. 760132 PRM VERSIO- AUTOMATIC MODE 1 2 PRM VERSIO- SEMI AUTOMATIC MODE DOW UP 1 2 Electronic Ballast DIM DIM VERSIO WITH MAUA DIMMIG OPTIO T1 WA BRACKET, SMA DBB-WBRKT ART. 760081 Electronic Ballast T2 22

PIR: UIVERSA SESOR, SURFACE MOUTED PIR: Universal Sensor, Surface Mounted A surface mounted sensor for hard ceilings This Universal PIR surface mounted sensor fulfills many type of lighting control needs in buildings with hard ceilings. The very flat lens design allows a big detection range of 40 m 2 which covers for example small offices, floors, locker & store rooms. This model is the universal answer for perfect lighting control in offices, hotels and public buildings. Detection range 360 o /Ø 7 m at ceiling height 2.8 m Available in on/off, 1-10V, DAI Presence detection and daylight linking Perfect solution for hard ceilings or limited built-in options Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment detection 360 +350C Y X X:7m Y:2,8m 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A CE 23

PIR: UIVERSA SESOR, SURFACE MOUTED DETECTIO RAGE 96.5 2.8 m 7 m 50 PRODUCT EBDSM-PRM EBDSM-DD EBDSM-AD Article no. 760067 760066 760065 EECTRICA DATA Sensor type PIR PIR PIR Sensor model On/off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A Max. no. of ballasts 20 20 if only 10 channel 2 is used. (otherwise 10) IP class IP 40 IP 40 IP 40 Power consumption passive 0.82 W 0.3 W 0.5 W Power consumption active 0.84 W 0.9 W 1.1 W Operation temperature -10 C- +35 C -10 C- +35 C -10 C- +35 C FEATURES Detection range Ø 7 m / 2.8 m height Ø 7 m / 2.8 m height Ø 7 m / 2.8 m height on/off, (non-floating contact) Channel 2 dim - DAI /DSI 1-10V Push button input Motion detection by default Presence detection by setting Semi-automatic mode Presence detection by setting Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last manual level) - Corridor function - SW PRM VERSIO- AUTOMATIC MODE SW PRM VERSIO- SEMI AUTOMATIC MODE Electronic Ballast Auto burn-in of fluorescent tubes - Electronic SETTIG DIM Ballast Control knob sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS 5 UHS 5 UHS 5 ` + - Channel 2 DOW UP T1 T2 GEERA DATA Dimensions (Diameter/depth mm) 96.5/50 96.5/50 96.5/50 Product weight (kg) 0.15 0.15 0.15 DIM VERSIO WITH MAUA DIMMIG OPTIO Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket - - - Wall mounting bracket - - - 24

PIR: ARGE RAGE SESOR PIR: arge Range Sensor The perfect sensor for high ceilings and large detection areas PIR sensor for installation heights of up to 15 m, with a corresponding detection range of 40 m. The covered detection range can be adjusted to individual detection ranges like 360/270/180/90 o to match the specific needs. It is the perfect product solution for all types of buildings with high ceilings like warehouses, production halls, sport centers, hotels and office buildings entries. It is easy to control with the programmable handset. The dim versions include corridor function and automatic burn-in of fluorescent lamps in connection with new installations and replacements. Detection range 360 o /Ø 40 m at ceiling height 15 m Available in on/off, 1-10V, DAI or wireless A10 versions Presence or motion detection selectable Special designed lens for reliable detection of high ceilings Semi- and fully automatic function Detection range separation (90 /180 /270 360 ) ight level control for daylight linking up to 5 m mounting height Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment detection 360 +350C Y X X:40m Y:15m 64mm 230VAC +/ 10% 50Hz 100C 5-95% IP44 CASS II ABS + PC/ABS 10A CE 25

PIR: ARGE RAGE SESOR DETECTIO RAGE 88 mm 15 m 49 mm 63 mm 40 m PRODUCT EBDHS-PRM EBDHS-DD EBDHS-AD Article no. 760109 760089 760111 EECTRICA DATA Sensor type PIR PIR PIR Sensor model On/Off DAI/DSI 1-10V Article no. 760109 760089 760111 Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A Max. no. of ballasts 20 20 if only channel 2 is 10 used. (otherwise 10) IP class IP 44 IP 44 IP 44 Power consumption passive 0.83 W 0.3 W 0.3 W Power consumption active 0.85 W 0.8 W 0.8 W FEATURES Detection range Ø 40 m / 15 height Ø 40 m / 15 height Ø 40 m / 15 height on/off, (non-floating contact) Channel 2 dim - DAI /DSI 1-10V Push button input Motion detection by default Presence detection by setting Semi-automatic mode Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last manual level) - Corridor function - Auto burn-in of fluorescent tubes - Selectable detection range 360 /270 /180 /90 SETTIG Control knob sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS 5 / UHS 6 UHS 5 / UHS 6 UHS 5 / UHS 6 GEERA DATA Dimensions (Diameter/depth 88/65 88/65 88/65 mm) Product weight (kg) 0.15 0.20 0.20 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket DBB DBB DBB Wall mounting bracket DBB-WBRKT DBB-WBRKT DBB-WBRKT ACCESSORIES ` CEIIG BRACKET, SMA DBB ART. 760132 + - Channel 2 1 2 PRM VERSIO- AUTOMATIC MODE 1 2 PRM VERSIO- SEMI AUTOMATIC MODE DOW UP DIM Electronic Ballast DIM VERSIO WITH MAUA DIMMIG OPTIO T1 WA BRACKET, SMA DBB-WBRKT ART.760081 Electronic Ballast T2 26

PIR: COD AREA SESOR Cold Area Sensor The perfect sensor for cold envinronments Photo: Vegafoto The Cold Area Sensor is a unique sensor developed for low temperature areas such as cold storage. This sensor works at a temperature of below -30 C. Standard sensors usually stops working after -20 C. This sensor has protected components which makes it durable for cold environments. The Cold Area Sensor is developed for installation heights of up to 15 m, with a corresponding detection range of 40 m. The covered detection range can be adjusted to individual detection ranges like 360/270/180/90 o by using a mechanical lens mask to match the specific needs. With the professional handset the setting can be adjusted upon an height of 10 m. The dim versions include corridor function and automatic burn-in of fluorescent lamps in connection with new installations and replacements. Detection range 360 o /Ø 40 m at ceiling height 15 m Developed especially for cold environments Available in on/off, 1-10V or DAI IP65 Outdoor application in protected installation Presence or motion detection selectable Special designed lens for reliable detection of high ceilings Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Selectable detection range Easy installation by factory setting and remote control adjustment detection 360 Y X X:40m Y:15m 64mm 230VAC +/ 10% 50Hz Minus 300C 5-95% IP65 CASS II ABS + PC/ABS 10A CE 27

PIR: COD AREA SESOR DETECTIO RAGE 88 mm 15 m 49 mm 63 mm 40 m PRODUCT EBDHS-PRM-T30 EBDHS-DD-T30 EBDHS-AD-T30 Article no. 760064 760063 760062 EECTRICA DATA Sensor type PIR PIR PIR Sensor model On/Off DAI/DSI 1-10V Article no. 760064 760063 760062 Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A Max. no. of ballasts 20 20 if only channel 10 2 is used. (otherwise 10) IP class IP 65 IP 65 IP 65 Power consumption passive 0.83 W 0.3W 0.3 W Power consumption active 0.85 W 0.8 W 0.8 W Operation temperature -30 C - +35 C -30 C - +35 C -30 C - +35 C FEATURES Detection range Ø 40 m / 15 height Ø 40 m / 15 Ø 40 m / 15 height height on/off, (non-floating contact) Channel 2 dim - DAI /DSI 1-10V Push button input Motion detection by default Presence detection by setting Semi-automatic mode Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode Adjustable sensitivity - presence Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last manual level) - Corridor function - Auto burn-in of fluorescent tubes - Selectable detection range 360 /270 /180 /90 SETTIG Control knob sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS 5 / UHS 6 UHS 5 / UHS 6 UHS 5 / UHS 6 GEERA DATA Dimensions (Diameter/depth mm) 88/65 88/65 88/65 Product weight (kg) 0.15 0.20 0.20 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket DBB DBB DBB Wall mounting bracket DBB-WBRKT DBB-WBRKT DBB-WBRKT ACCESSORIES BRACKET FOR COD AREA SESOR ART. 760070 ` + - Channel 2 1 2 PRM VERSIO- AUTOMATIC MODE 1 2 Electronic Ballast PRM VERSIO- SEMI AUTOMATIC MODE DOW UP DIM Electronic Ballast DIM VERSIO WITH MAUA DIMMIG OPTIO T1 T2 28

PIR: HIGH BAY SESOR PIR: High bay Sensor The perfect sensor for areas with high ceilings The High bay PIR sensor is designed for installation heights of up to 15 m. It has a special lens technology with focused detection range of 5.1 m x 5.1 m for shelf areas in warehouse and logistics applications. The sensor is easy to control from the ground with the programmable handset. Suitable for advanced detection, e.g. warehouse walkways. The dim versions include corridor function and automatic burn-in of fluorescent lamps in connection with new installations and lamp replacements. Detection range up to 5.1 x 5.1 m at ceiling height 15 m For high bay applications Available in on/off, 1-10V, DAI version Presence detection and daylight linking* Semi- and fully automatic function Stepless dimming level, delay time and detection Easy installation by factory setting and remote control adjustment * up to 5 meters only detection 360 +350C Y X X:5,1m Y:15m 64mm 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A CE 29

PIR: HIGH BAY SESOR DETECTIO RAGE Height Detection range 15 m 5.1 m x 5.1 m 12 m 4.0 m x 4.0 m 10 m 3.4 m x 3.4 m 8 m 2.7 m x 2.7 m 6 m 2.0 m x 2.0 m 15 m 5.1 m 2.0 m 5.1 m 2.0 m 6 m PRODUCT EBDSPIR-HB-PRM EBDSPIR-HB-DD EBDSPIR-HB-AD Article no. 760128 760126 760127 EECTRICA DATA Sensor type PIR PIR PIR Sensor model On/Off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A Max. no. of ballasts 20 20 if only channel 2 10 is used. (otherwise 10) IP class IP40 IP40 IP40 Power consumption passive 0.87 W 0.6 W 0.3 W Power consumption active 0.89 W 0.8 W 0.7 W Operation temperature 0 C - 35 C 0 C - 35 C 0 C - 35 C FEATURES Detection range 5 m* 5 m / 15 m height 5 m* 5 m / 15 m height 5 m* 5 m / 15 m height on/off (non-floating contact) Channel 2 dim - DAI /DSI 1-10V Push button input Motion detection by default Presence detection by setting Semi-automatic mode Adjustable sensivity ux switching on & off Separate sensitivity for active & passive mode Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last manual level) - Corridor function - Auto burn-in of fluorescent tubes - SETTIG Conrtrol knob on sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS5 UHS5 UHS5 GEERA DATA Dimension (Diameter/depth mm) 76/65 76/65 76/65 Product weight (kg) 0.15 0.20 0.20 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket DBB DBB DBB Wall mounting bracket DBB-WBRKT DBB-WBRKT DBB-WBRKT ACCESSORIES CEIIG BRACKET, SMA DBB ART. 760132 ` + - Channel 2 WA BRACKET, SMA DBB-WBRKT ART. 760081 PRM VERSIO- AUTOMATIC MODE 1 2 Electronic Ballast PRM VERSIO- SEMI AUTOMATIC MODE DOW UP DIM Electronic Ballast T1 1 2 DIM VERSIO WITH MAUA DIMMIG OPTIO T2 30

PIR: MII SESOR PIR: Mini Sensor Discreet mini sensor for nearly invisible installations The Mini PIR sensor is an ideal solution for small, separated detection zones. The small design allows it to be integrated into ceilings, shelves and furnitures without being seen. With a detection area of 360 o / Ø 5 m this sensor can be used in small offices, storage rooms, copy rooms or restrooms. The nearly invisible design can easily be integrated in modern ceiling arrangements. Detection range 360 o /Ø 5 m at ceiling height 2.8 m Discreet design Available in on/off, 1-10V or DAI Presence detection and daylight linking Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation by factory setting and remote control adjustment detection 360 +350C Y X X:5m Y:2.8m 32mm 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A CE 31

PIR: MII SESOR DETECTIO RAGE 22 20 3 3 2.8 m 27 28 RJ10A 0,5 19 22 1,5 5 m 142 110 40 22 4 PRODUCT EBMPIR-PRM-SA-C EBMPIR-DD-SA-C EBMPIR-AD-SA-C Article no. 760115 760116 760117 EECTRICA DATA Sensor type PIR PIR PIR Sensor model On/Off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 6 A 6 A 6 A Max. no. of ballasts 20 20 if only channel 2 10 is used. (otherwise 10) IP class IP 40 IP 40 IP 40 PRM VERSIO- AUTOMATIC MODE Power consumption passive 0.82 W 0.3 W 0.5 W Power consumption active 0.84 W 0.9 W 1.1 W Operation temperature -10 C- +35 C -10 C- +35 C -10 C- +35 C FEATURES Detection range Ø 5 m / 2.8 m height Ø 5 m / 2.8 m height Ø 5 m / 2.8 m height Electronic Ballast DIM on/off, (non-floating contact) Channel 2 dim - DAI /DSI 1-10V Push button input + - Channel 2 COM UP DOW T2 T1 Motion detection by default Presence detection by setting PRM VERSIO- SEMI AUTOMATIC MODE Semi-automatic mode Adjustable sensitivity ux switching on & off Presence detection by setting Adjustable sensitivity - presence Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last manual level) - Corridor function - Auto burn-in of fluorescent tubes - SETTIG Control knob sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS 5/6/7 UHS 5/6/7 UHS 5/6/7 GEERA DATA Dimensions (Diameter/depth mm) 28/22 (sensor head) 28/22 (sensor head) 28/22 (sensor head) Product weight (kg) 0.10 0.10 0.10 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket - - - Wall mounting bracket - - - 32

PIR: WA SESOR PIR PRESECE SESORS PIR: Wall Sensor Automatic switch for more comfort and safety This automatic wall sensor ensure safety and increase comfort in all types of rooms. The sensor can be used in both fully automatic or semi-automatic mode, depending on the application and is available in both an on/off version and as a dimmer. These sensors are the perfect solution for renovations, since they fit in a standard wall frame and need no further programming. Detection range up to 5 m Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning for the dim version Available versions: on/off and conventional dimming Supplied with white front panel, bronze and brusched steel available as accessories Perfect solution for renovation without new cabling Build-in battery avoids re-cabling ifetime of battery approx. 5 years detection range +350C X Y X:5m Y:1.5m 51mm 230VAC +/ 10% 50Hz 100C 5-95% IP20 CASS II ABS + PC/ABS 10A CE 33

PIR: WA SESOR DETECTIO RAGE 25 mm 5 m 86 mm 4.5 m 86 mm PRODUCT E-3005 E-3003 E-3004 Article no. 760152 760150 760151 Sensor type PIR 130 PIR 130 PIR 130 Sensor model On&off Dimmer Double dimmer Detection range 5 m detection diameter at distance of 4.5 m 5 m detection diameter at distance of 4.5 m 5 m detection diameter at distance of 4.5 m Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Incandescent light load mini/max 10A 40 W/400 W 40 W/250 W per channel IP Class IP20 IP20 IP20 ow-voltage/transformer load mini/max 10A 60 W/400 W 60 W/250 W per channel oad, other light sources 10A ot compatible ot compatible Battery 3 V DC CR2477 - - Remote control - (E3007) (E3007) Fully automated on/off Semi-automated mode on/auto off Holiday mode Adjustable lux Adjustable delay time 1-30 min 1-30 min 1-30 min Dim level memory - Preset scenarios - Constant low level/ night light - IP class IP 20 IP 20 IP 20 Recessed and surface mounted instr. GIPB/RD-IQ GIPB/RD-IQ GIPB/RD-IQ Colour White White White Product dimensions (Diameter/depth 85 X 85 85 X 85 85 X 85 mm) Product weight (kg) 0.106 0.148 0.148 Guarantee 5 years 5 years 5 years ACCESSORY Protective frame brushed steel E-3008 E-3008 E-3008 Protective frame brushed bronze finish E-3009 E-3009 E-3009 Remote control E-3007 E-3007 E-3007 Bracket for surface mounted installation GIPB/RD GIPB/RD GIPB/RD ACCESSORIES S PRM VERSIO- DIM & PRM S Channel 2 PRM VERSIO- DIM 2 CHAE PROTECTIVE FRAME BRUSHED STEE FIISH E-3008 ART. 760153 PROTECTIVE FRAME BRUSHED BROZE FIISH, E-3009 ART. 760154 REMOTE COTRO E-3007 ART.760155 BRACKET FOR SURFACE MOUTED ISTAATIO GIPB/RD ART. 760156 34

HF: UIVERSA SESOR HF: Universal Sensor The sensor that detects even the smallest movement Compact HF all-in-one sensor which detects even very small movements. This is the ideal sensor in areas where people are sitting still, such as offices, meeting rooms and class rooms. The very low profile makes it almost invisible when recessed in soft ceilings. The sensor is delivered with a modular quick connector for easy installation with spring clamps. Detection range up to 360 o /16 m at mounting height 2.8 m ow convex profile, for nearly invisible installation Presence and motion sensor in one Daylight linking function Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning Available versions: on/off, DAI, 1-10V and A10 Factory Preset for plug & play 5.8GHz detection 360 +350C microwave frequency Y X X:16m Y:2,8m 64mm 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A CE 35

HF: UIVERSA SESOR DETECTIO RAGE 76 8 65 2.8 m 12-16 m 76 3,88 65 PRODUCT MWS6-PRM MWS6-PRM/2K MWS6-DD MWS6-AD Article no. 760123 760185 760122 760143 TECHICA DATA Sensor type HF 5.8 GHz HF 5.8 GHz HF 5.8 GHz HF 5.8 GHz Sensor model On/Off On/Off DAI/DSI 1-10V Article no. 760123 760185 760122 760143 Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A 10 A Max no. of ballasts 20 if only channel 20 20 2 is used 10 (otherwise 10) IP class IP 40 IP 40 IP 40 IP 40 Power consumption passive 0,7 W 0,7 W 0,7 W 0,7 W Power consumption active 1,1 W 1,6 W 1,1 W 1,1 W Operation temperature -10 C - + 35 C -10 C - + 35 C -10 C - + 35 C -10 C - + 35 C Features Detection range Ø: 16 m / h: 2,8 m Ø: 16 m / h: 2,8 m Ø: 16 m / h: 2,8 m Ø: 16 m / h: 2,8 m On/Off (non floating contact) & Channel 2 PRM VERSIO- AUTOMATIC MODE 1 Electronic Ballast 2 Channel 2 dim - - Dali/DSI 1-10V Push button input Motion detection by default Presence detection by setting Semi-automatic mode Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last manual level) - - Corridor function - - Auto burn-in of fluorescent tubes - - SETTIG Control knob on sensor - - - - Remote control UCDHS UCDHS UCDHS UCDHS Remote control, user UHS5 / UHS6 UHS5 / UHS6 UHS5 / UHS6 UHS5 / UHS6 GEERA DATA Dimensions (diameter/ depth mm) 76/65 76/65 76/65 76/65 Product weight 0,16 0,17 0,20 0,20 Colour White RA 9003 White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket DBB DBB DBB DBB Wall mounting bracket DBB-WBRKT DBB-WBRKT DBB-WBRKT DBB-WBRKT ACCESSORIES ` + - Channel 2 CEIIG BRACKET, SMA DBB ART. 760132 1 2 PRM VERSIO- SEMI AUTOMATIC MODE DOW UP Electronic Ballast DIM DIM VERSIO WITH MAUA DIMMIG OPTIO T1 WA BRACKET, SMA DBB-WBRKT ART. 760081 T2 36

HF: UIVERSA SESOR, SURFACE MOUTED HF: Universal Sensor, Surface Mounted A sensor for hard ceilings and small movements Compact HF all-in-one sensor that detects even very small movements. This is the ideal sensor in areas with small movements and for all type of buildings with concrete ceilings like car parks, basements or restrooms. There s no reason to feel insecure in a dark car park any longer. This sensor will light up immediately when detecting even the smallest movement. Due to the compact design, it is nearly invisible when installed. The HF-technology makes it perfect to detect both humans and all type of vehicles. Detection range up to 360 o /16 m at mounting height 2.8 m ow convex profile, for nearly invisible installation Presence and motion sensor in one Daylight linking function Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning Available versions: on/off, DAI and 1-10V Factory Preset for plug & play 5.8GHz detection 360 +350C microwave frequency Y X X:16m Y:2,8m 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A ASI IEEEC95. 1-1999 CE 37

HF: UIVERSA SESOR, SURFACE MOUTED DETECTIO RAGE 95 2.8 m 52 12-16 m PRODUCT MWS6SM-PRM MWS6SM-DD MWS6SM-AD Article no. 760373 760374 760375 TECHICA DATA Sensor type HF 5.8 GHz HF 5.8 GHz HF 5.8 GHz Sensor model On/off DAI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A Max no. of ballasts 20 20 if only channel 2 is used (otherwise 10) IP class IP 40 IP 40 IP 40 Power consumption passive 0,87 W 0,7 W 0,7 W Power consumption active 0,9 W 0,83 W 0,83 W Operation temperature -10 C - + 35 C -10 C - + 35 C -10 C - + 35 C Features Detection range Ø: 16 m / h: 2,8 m Ø: 16 m / h: 2,8 m Ø: 16 m / h: 2,8 m On/Off (non floating contact) Channel 2 dim - DAI/DSI 1-10V Push button input Automatic mode Semi-automatic mode Adjustable sensitivity Adjustable lux - switching on Adjustable sensitivity - presence 10 SW PRM VERSIO- AUTOMATIC MODE SW PRM VERSIO- SEMI AUTOMATIC MODE Electronic Ballast Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last man. level) - Corridor function - Auto burn-in of fluorescent tubes - SETTIG Control knob on sensor - - - Electronic Ballast DIM Remote control UCDHS UCDHS UCDHS Remote control, user UHS5 /UHS7 UHS5 /UHS7 UHS5 /UHS7 GEERA DATA Dimensions (diameter/depth mm) 95/52 95/52 95/52 Product weight (kg) 0,15 0,20 0,20 ` + - Channel 2 DOW UP DIM VERSIO WITH MAUA DIMMIG OPTIO T1 T2 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years 38

HF: CORRIDOR SESOR PIR PRESECE SESORS HF: Corridor Sensor A high-quality sensor with moveable antenna Aura ight s HF Corridor Sensor is an allin-one sensor with moveable antenna for adjustable distances up to 30 m. The antenna fulfulls a range of detection demands and allows flexible mounting options. Whether used with clappedin antenna for invisible installation in office areas, or with full clapped-out antenna in car parks, the detection range covers up to 22 m x 6 m at a 2.6 ceiling height. This unique corridor sensor is the perfect solution in areas where humans and vehicles should be detected. The movable antenna is very flexible in terms of detection zone adjustment. Detection range up to 30 m at mounting height 2.8 m Presence and motion sensor in one Daylight linking function Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning Available versions: on/off, DAI, 1-10V and A10 Factory Preset for plug & play 10.525GHz detection range +350C microwave frequency X Y X:22m Y:6m 74mm 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A CE 39

HF: CORRIDOR SESOR DETECTIO RAGE 0 90 2.8 m 6 m 30 m 85 92 0 90 2.8 m 6 m 85 92 PRODUCT MWS3A-PRM MWS3A-DD MWS3A-AD Article no. Depends on region Depends on region Depends on region TECHICA DATA Sensor type HF HF HF Sensor model On/Off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A Max no. of ballasts 20 20 if only channel 2 is 10 used (otherwise 10) IP class IP 40 IP 40 IP 40 Power consumption passive 0,9 W 1 W 1 W Power consumption active 1,5 W 1,5 W 1,5 W Operation temperature -10 C - + 50 C -10 C - + 50 C -10 C-.+ 50 C Features Detection range depending of antenna position Ø: 22 m x 6 / h: 2, 8 m Ø: 22 m x 6 / h: 2,8 m Ø: 22 m x 6 / h: 2,8 m On/Off (non floating contact) Channel 2 dim - Dali/DSI 1-10V Push button input Automatic mode Semi-automatic mode Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last manual setting) - Corridor function - Auto burn-in of fluorescent tubes - SETTIG Control knob on sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS5 / UHS6 UHS5 / UHS6 UHS5 / UHS6 GEERA DATA Dimensions (diameter/depth mm) 85/92 85/92 85/92 Product weight 0,20 0,20 0,20 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket MWS3A-DBB MWS3A-DBB MWS3A-DBB Region Region Code/ Suffix Frequency MW- S3A-PRM MW- S3A-DD MW- S3A-AD UK, China, India, Middle East, Malaysia, Hong Kong, Singapore R0 10.687 GHz 760183 760184 760186 Australia and all of Europe except: R2 10.525 GHz 760125 760142 760124 UK, France, Portugal, Germany, Switzerland, Austria, Slovak Republic, Republic of Ireland France, Portugal, Switzerland R3 9.900 GHz 760086 760144 760146 Germany, Austria, Slovak Republic R4 9.350 GHz 760087 760145 760147 ACCESSORIES ` + - Channel 2 PRM VERSIO- AUTOMATIC MODE 1 2 Electronic Ballast PRM VERSIO- SEMI AUTOMATIC MODE DOW UP Electronic Ballast DIM DIM VERSIO WITH MAUA DIMMIG OPTIO T1 1 2 T2 Wall mounting bracket MWS3A-DBB-WBRKT MWS3A-DBB-WBRKT MWS3A-DBB-WBRKT CEIIG BRACKET, ARGE MWS3A-DBB ART. 760133 WA BRACKET, ARGE MWS3A-DBB-WBRKT ART. 760080 40

HF: WA SESOR PIR PRESECE SESORS HF: Wall Sensor A wall mounted sensor for corridors HF sensor for easy installation in a wallmounted box. Adjustable range of up to 30 m. The sensor is perfect for corridors and large areas. Adjustable detection range up to 30 m Fully automatic function Remote controlled for professional commissioning Available versions: on & off Factory preset for plug & play 10.525GHz detection range +350C 100C microwave frequency X Y X:30m Y:6m 60mm 230VAC +/ 10% 50Hz IP40 CASS II 5-95% ABS + PC/ABS 10A CE 41

HF: WA SESOR DETECTIO RAGE 22 mm 23.5 mm 30 m 6 m 86 mm 88 mm PRODUCT MWS1A-PRM Article no. Depends on region TECHICA DATA Sensor type HF Sensor model On/Off Voltage 230 V AC 50 Hz Max. load 10A Max no. of ballasts 6 IP class IP 40 Power consumption passive 0,7 W Power consumption active 1 W Operation temperature -10 C - + 35 C Features Detection range 30*6 m / 2.8 m height On/Off (non floating contact) Channel 2 dim - Push button input - Automatic mode Semi-automatic mode - Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode Detection indication Setting indication Time delay, stepless 10 sec - 99 min Dimmer memory - (last manual setting) Corridor function - Auto burn-in of fluorescent tubes - SETTIG Control knob on sensor - Remote control UCDHS Remote control, user UHS5 GEERA DATA Dimensions (diameter/depth mm) 86/86 Product weight 0.11 Colour White RA 9003 Guarantee 5 years ACCESSORY Wall mounting box GIPB/RD Region UK, China, India, Middle East, Malaysia, Hong Kong, Singapore Region Code/ Suffix Frequency MWS1A-PRM R0 10.687 GHz 760189 Australia and all of Europe except: R2 10.525 GHz 760134 UK, France, Portugal, Germany, Switzerland, Austria, Slovak Republic, Republic of Ireland France, Portugal, Switzerland R3 9.900 GHz 760084 Germany, Austria, Slovak Republic R4 9.350 GHz 760085 ACCESSORY WA BOX GIPB/RD ART. 760156 WIRE DIAGRAM O/OFF (PRM VERSIO) 42

HF: MII SESOR PIR PRESECE SESORS HF: Mini Sensor A mini sensor with discrete design The Mini HF sensor is delivered complete with driver unit and installation brackets for recessed or surface-mounted installation in suspended ceiling or luminaire. The sensor can also be concealed in a luminaire or in suspended ceiling, e.g. maintaining the IP class of the luminaire. The sensor head is supplied with a 30 cm modular cable RJ 10A. Suitable for detecting small work groups. Detection range up to 8 m at mounting height 2.4 m Presence and motion sensor in one Daylight linking function Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning Available versions: on/off, DAI or 1-10V Factory Preset for plug & play 5.8GHz detection range +350C microwave frequency X Y X:12m Y:5m 32mm 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A CE 43

HF: MII SESOR DETECTIO RAGE RJ10A 2.4 m 18 mm 1 mm 1 mm Ø 37 mm 1 mm Ø 39 mm 8 m 142 mm 110 mm 12 m 5 m 40 mm 4 22 mm PRODUCT MWS5-PRM-SA-C MWS5-DD-SA-C MWS5-AD-SA-C Article no. 760104 760106 760107 TECHICA DATA Sensor type HF 5.8 GHz HF 5.8 GHz HF 5.8 GHz Sensor model On/Off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 6 A 6 A 6 A Max no. of ballasts 10 10 10 IP class IP 40 IP 40 IP 40 Power consumption passive 1,5 W 0,9 W 0,8 W 1 COM Power consumption active 1,1 W 1,8 W 1,1 W Operation temperature -10 C - + 35 C -10 C - + 35 C -10 C - + 35 C Features PRM VERSIO- AUTOMATIC MODE Detection range Ø: 8 / h: 2,8 m Ø: 8 / h: 2,8 m Ø: 8 / h: 2,8 m On/Off (non floating contact) Channel 2 dim - Dali/DSI 1-10V Push button input Automatic mode Semi-automatic mode DIM Electronic Ballast Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode + - Channel 2 COM UP DOW T2 T1 Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last manual setting) - Corridor function - PRM VERSIO- SEMI AUTOMATIC MODE Auto burn-in of fluorescent tubes - SETTIG Control knob on sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS5 UHS5 UHS5 GEERA DATA Dimensions (diameter/depth mm) 39 /18 (sensor head) 39 /18 (sensor head) 39 /18 (sensor head) Product weight 0,10 0,10 0,10 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket - - - Wall mounting bracket - - - 44

WIREESS A10 : UIVERSA PIR SESOR PIR PRESECE SESORS Wireless A10 : Universal PIR Sensor A wireless, flexible and nearly invisible PIR sensor The Wireless Universal PIR sensor is a discreet, minimalistic sensor which makes it perfect for almost any type of building. The wireless broadcast system reduces installation costs and reduces cable installation. It also allows a more future-proof and flexible installation. The detection range of 7 m will cover up to 40 m 2, which is perfect for offices, floors, meeting rooms, entries and social rooms. Detection range 360 o /Ø 7 m at ceiling height 2.8 m Available in on/off, 1-10V, DAI or wireless A10 versions Presence detection and daylight linking Invisible mounting due to low profile (3,7 mm) Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation Wireless transmission on 868 MHz Unique mesh network for reliable functionality Transceiver system with 4-step security coding Individual light scene options like corridor function light Factory preset for easy installation One light scene command- unlimited receivers reacts* *depends on buildings physics AT system detection 360 AT system +350C 868MHz radio frequency Y X X:2.8m Y:7m 64mm 230VAC +/ 10% 50Hz 868MHz radio frequency 100C IP40 5-95% CASS II ABS + PC/ABS 10A CE 45

WIREESS A10 : UIVERSA PIR SESOR DETECTIO RAGE 76 4 65 2.8 m 7 m An-10 76 4 65 PRODUCT EBDSPIR-AT-PRM EBDSPIR-AT-DD EBDSPIR-AT-AD Article no. 760160 760161 760162 EECTRICA DATA Sensor type PIR PIR PIR Sensor model On/Off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A Max. no. of ballasts 20 20 if only channel 2 is 10 used. (otherwise 10) IP class IP 40 IP 40 IP 40 Power consumption passive 0.6 W 0.6 W 0.6 W Power consumption active 0.8 W 0.8 W 0.8 W Operation range (indoor) > 30 m > 30 m > 30 m Operation temperature 0 C - 35 C 0 C - 35 C 0 C - 35 C FEATURES Detection range Ø 7 m / 2.8 m height Ø 7 m / 2.8 m height Ø 7 m / 2.8 m height on/off Channel 2 dim - DAI /DSI 1-10V Channel 3 wireless 868MHz/ 3 CH 868MHz/ 3 CH 868MHz/ 3 CH Push button input via AT-BB-I via AT-BB-I via AT-BB-I Semi-automatic mode Adjustable sensitivity Adjustable lux - switching on Adjustable sensitivity - presence Detection indication Setting indication Time delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Corridor function - Auto burn-in of fluorescent tubes - SETTIG Control knob for sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS4 UHS4 UHS4 GEERA DATA DIMESIOS (Diameter/depth mm) 76/65 76/65 76/65 Product weight (kg) 0.13 0.15 0.15 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket DBB DBB DBB Wall mounting bracket DBB-WBRKT DBB-WBRKT DBB-WBRKT Relay module AT-S-R / AT-S-DDR / AT-S- ADR AT-S-R / AT-S-DDR / AT-S- ADR AT-S-R / AT-S- DDR / AT-S- ADR Switch module AT-BB-I AT-BB-I AT-BB-I 1 230V /AC 1 ACCESSORIES CEIIG BRACKET, SMA DBB ART. 760132 SWITCH MODUE AT-BB-I ART. 760167 Sensor (Transmitter) + - Channel 22 Sensor (Transmitter) Ballast Electronic Ballast DIM WIRE DIAGRAM A10 SYSTEM WA BRACKET, SMA DBB-WBRKT ART.760081 REAY MODUE AT-S-R/-DDR/-ADR ART. 760168/760170/760172 A10 DIM & SWITCH COTRO ART. 760207 46

WIREESS A10 : ARGE RAGE PIR SESOR PIR PRESECE SESORS Wireless A10 : arge Range PIR Sensor A wireless sensor for applications with a large detection area Wireless A10 large range PIR sensor is designed for installation heights of up to 15 m, with a corresponding detection range of 40 m. The covered detection area can be adjusted to individual detection ranges like 360/270/180/90 o to match the specific needs. The Wireless A10 technology recudes costs and maintenance in buildings with high ceilings and big areas, like warehouse, logistic centers, industry halls or sport halls. The wireless connectivity gives the flexibility for complex installations. Especially in combination with the large range detector, this technology makes life easier for installation in large buildings. Detection range 360 o /Ø40 m at ceiling height 15 m Available in on/off, 1-10V, DAI or wireless A10 versions Presence detection and daylight linking Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Easy installation Wireless transmission on 868 MHz Up to 30 m transmission range Unique mesh network for reliable functionality Transceiver system with 4-step security coding One light scene command- unlimited receives reacts* *depends on buildings physics AT system detection 360 +350C 868MHz radio frequency Y X X:40m Y:15m 64mm 230VAC +/ 10% 50Hz 100C 5-95% IP44 CASS II ABS + PC/ABS 10A CE 47

WIREESS A10 : ARGE RAGE PIR SESOR DETECTIO RAGE 15 m 40 m An-10 PRODUCT EBDHS-AT-PRM EBDHS-AT-DD EBDHS-AT-AD Article no. 760073 760074 760075 EECTRICA DATA 1 Ballast Sensor type PIR PIR PIR Sensor model On/Off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10 A 10 A 10 A Max. no. of ballasts 20 20 if only channel 2 10 is used (otherwise 10) IP Class IP 44 IP 44 IP 44 Sensor (Transmitter) Power consumption passive 0.6 W 0.6 W 0.7 W Power consumption active 1.1 W 1.1 W 1.2 W Operation temperature 0 C - 35 C 0 C - 35 C 0 C - 35 C FEATURES Detection range Ø 40 m / 15 m height Ø 40 m / 15 m height Ø 40 m / 15 m height on/off, (non-floating contact) 1 Electronic Ballast DIM Channel 2 dim - DAI /DSI 1-10V Channel 3 wireless 863MHz/ 3 CH 863MHz/ 3 CH 863MHz/ 3 CH Operation range (indoor) > 30 m > 30 m > 30 m Push button input via AT-BB-I via AT-BB-I via AT-BB-I Automatic mode Semi-aut0matic mode Adjustable sensitivity Adjustable lux - switching on Adjustable sensitivity presence Detection indication Setting indication Time, Delay, Stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Dimmer memory (last man. level) - Corridor function - Auto burn-in of fluorescent tubes - Selectable detection range 360 /270 /180 /90 SETTIG Control knob on sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS4 UHS4 UHS4 GEERA DATA Dimensions (Diameter/depth mm) 88/65 88/65 88/65 Product weight (kg) 0.15 0.20 0.20 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket DBB DBB DBB Wall mounting bracket DBB-WBRKT DBB-WBRKT DBB-WBRKT Relay module AT-S-R / AT-S-DDR / AT-S- ADR AT-S-R / AT-S-DDR / AT-S- ADR Switch module AT-BB-I AT-BB-I AT-BB-I AT-S-R / AT-S-DDR / AT-S- ADR ACCESSORIES CEIIG BRACKET, SMA DBB ART. 760132 SWITCH MODUE AT-BB-I ART. 760167 + - Channel 22 Sensor (Transmitter) WIRE DIAGRAM A10 SYSTEM WA BRACKET, SMA DBB-WBRKT ART.760081 REAY MODUE AT-S-R/-DDR/-ADR ART. 760168/760170/760172 A10 DIM & SWITCH COTRO ART. 760207 48

WIREESS A10 : CORRIDOR HF SESOR PIR PRESECE SESORS Wireless A10 : Corridor HF Sensor A high-quality sensor for long operation inductances Wireless HF corridor sensor with a detection range of up to 30 m. Corridors often need long cables to connect to a ight Management System. The Wireless A10 control system only needs power. The switching or dimming command is wireless and transmitted by air. This broadcast system reduces maintenance costs and reduces cable installation. It also allows a more future-proof and flexible installation. This wireless corridor sensor is perfect for all type of buildings where there are long corridors like offices, hotels, car parks, warehouses and supermarkets. Presence and motion sensor in one Detection range 30 x 6 m at mounting height 2.8 m Daylight linking function Semi- and fully automatic function Stepless dimming level, delay time and detection sensitivity Remote controlled for professional commissioning Available versions: on&off/dali/ 1-10V/ An10 Factory Preset for plug & play ow convex profile Wireless transmission on 868 MHz Up to 30 m transmission range Unique mesh network for reliable functionality Transceiver system with 4-step security coding One light scene command- unlimited receives reacts* *depends on buildings physics AT system 10.525GHz detection range +350C 868MHz radio frequency microwave frequency X Y X:30m Y:6m 74mm 230VAC +/ 10% 50Hz 100C IP40 5-95% CASS II ABS + PC/ABS 10A CE 49

WIREESS A10 : CORRIDOR HF SESOR DETECTIO RAGE 0 90 2.8 m 6 m 30 m 85 92 0 90 2.8 m 85 92 An-10 6 m PRODUCT MWS3A-AT-PRM MWS3A-AT-D MWS3A-AT-AD Article no. Depends on region Depends on region Depends on region EECTRICA DATA Sensor type HF HF HF Sensor model On/Off DAI/DSI 1-10V Voltage 230 V AC 50 Hz 230 V AC 50 Hz 230 V AC 50 Hz Max. load 10A 10A 10A Max. no. of ballast 20 20 if only channel 2 20 is used. (otherwise 10) IP Class IP40 IP40 IP40 Power consumption passive 1.3 W 1.3 W 1.3 W Power consumption active 2.1 W 2.1 W 2.1 W Operation temperature 0 C - 35 C 0 C - 35 C 0 C - 35 C FEATURES Detection range 22*6 m / 2.8 m height 22*6 m / 2.8 m height 22*6 m / 2.8 m height depends on antenna position on/off, (non-floating contact) Code Suffix R0 R2 Region Frequency MWS3A- AT-PRM UK, China, India, Middle East, Malaysia, Hong Kong, Singapore Australia and all of Europe except: UK, France, Portugal, Germany, Switzerland, Austria, Slovak Republic, Republic of Ireland 10.687 GHz 10.525 GHz MW- S3A-AT- DD MW- S3A-AT- AD 760148 760158 760178 760163 760164 760165 R3 France, Portugal, Switzerland 9.900 GHz 760149 760159 760179 R4 Germany, Austria, Slovak 9.350 GHz 760157 760177 760182 Republic 1 Ballast Channel 2 dim - DAI/DSI 1-10V Channel 3 868MHz 868MHz 868MHz Operation range (outdoor) > 30 m > 30 m > 30 m Push button input via AT-BB-I via AT-BB-I via AT-BB-I Automatic mode Semi-automatic mode Adjustable sensitivity Adjustable lux - switching on 1 Sensor (Transmitter) Adjustable sensitivity - presence Detection indication Setting indication Time, delay, stepless 10 sec-99 min 10 sec-99 min 10 sec-99 min Corridor function - Auto burn-in of fluorescent - tubes SETTIG Control knob on sensor - - - Remote control UCDHS UCDHS UCDHS Remote control, user UHS4 UHS4 UHS4 GEERA DATA Dimensions (diameter/ 85/92 85/92 85/92 depth/mm) Product weight (kg) 0.20 0.20 0.20 Colour White RA 9003 White RA 9003 White RA 9003 Guarantee 5 years 5 years 5 years ACCESSORY Ceiling mounting bracket MWS3A-DBB MWS3A-DBB MWS3A-DBB Wall mounting bracket MWS3A-DBB-WBRKT MWS3A-DBB-WBRKT MWS3A-DBB-WBRKT Relay module AT-S-R / AT-S-DDR / AT-S- ADR AT-S-R / AT-S-DDR / AT-S- ADR Switch module AT-BB-I AT-BB-I AT-BB-I AT-S-R / AT-S-DDR / AT-S- ADR ACCESSORIES CEIIG BRACKET, ARGE MWS3A-DBB ART. 760133 SWITCH MODUE AT-BB-I ART. 760167 + - Channel 22 Sensor (Transmitter) Electronic Ballast DIM WA BRACKET, ARGE MWS3A-DBB-WBRKT ART. 760080 WIRE DIAGRAM A10 SYSTEM REAY MODUE AT-S-R/-DDR/-ADR ART. 760168/760170/760172 A10 DIM & SWITCH COTRO ART. 760207 50

51

KX: UIVERSA PIR SESOR PIR PRESECE SESORS KX: Universal PIR Sensor A high-quality sensor designed to be a part of a KX system The Universal PIR Sensor is a high-quality sensor that works for most applications and is designed to be a part of a KX system. The sensor is a PIR (passive infrared) presence detector that provides automatic control of lighting with optional manual control. This sensor is designed to be a part of a KX system with two manual inputs. Integrated logic and timer function options makes it easier to create light scenes, without additional external components. Whether you want to control the lighting, heating or ventilation, this sensor have the KX functionalities to do just that. Presence and motion sensor in one Detection range up to 16 m at mounting height 2.8 m Daylight linking function Semi- and fully automatic function Stepless dimming level, hold time and detection sensitivity Remote controlled for professional commissioning Available versions: KX Factory Preset for plug & play ow convex profile Two manual switch inputs Remote controlled light scenes detection 360 +350C Y X X:7m Y:2,8m 64mm 230VAC +/ 10% 50Hz 100C 5-95% IP40 CASS II ABS + PC/ABS 10A CE KX 52

KX: UIVERSA PIR SESOR DETECTIO RAGE 76 2.8 m 7 m 4 65 PRODUCT EBDSPIR-KX Article no. 760102 EECTRICA DATA Sensor type PIR Sensor model KX Voltage 30V/DC Max. load - Max. no. of ballasts - IP class IP 40 Power consumption passive 23,2 ma + - 30 V DC Power consumption active 23,2 ma T2 T1 Operation temperature -10 C- +35 C FEATURES Detection range Ø: 7 m / h: 2,8 m height on/off, (non-floating contact) - + - 1 1 2 COM COM WIRE DIAGRAM KX SYSTEM Channel 2 dim - Push button input Motion detection by default Presence detection by setting Semi-automatic mode Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive - mode Detection indication Setting indication Delay time, stepless 10 sec - 30 min Dimmer memory (last manual setting) - Corridor function - Auto burn-in of - fluorescent tubes SETTIG Control knob sensor Remote control UCDHS Remote control, user UHS5/UHS7 GEERA DATA Dimensions (Diameter/depth mm) 76/65 ACCESSORIES Product weight (kg) 0,16 kg Colour White RA 9003 Guarantee 5 years ACCESSORY Ceiling mounting bracket DBB Wall mounting bracket DBB-WBRKT CEIIG BRACKET, SMA DBB ART. 760132 WA BRACKET, SMA DBB-WBRKT ART. 760081 53

KX: ARGE RAGE PIR SESOR PIR PRESECE SESORS KX: arge Range PIR Sensor Perfect choice for the detection of all types of buildings with high ceilings The KX arge Range PIR Sensor is a passive infrared presence sensoe that is suitable for applications with very high ceilings. The unique lens allows an operation height of up to 15 m with and corresponding detection range of 40 m. The detection range can be adjusted to an individual detection range (e.g. 360/270/180/90) by using the software. This makes it very easy and flexible to adjust the detection after each situation. It is the perfect solution for all type of buildings with high ceilings like warehouses, production halls, sport halls, hotels and office building entries. Detection range 360 O /Ø 40 m at a ceiling height 2.8 m ETS software can be downloaded from auralight.com KX activation programmed through the button on the sensor or by remote control Detection range Ø 7 m at ceiling height 2.8 m Available in on/off, 1-10V, Dali/DSI/wireless A10 or KX versions. Presence detection and daylight linking Invisible mounting due to low profile (5mm) Semi- and fully automatic function Stepless dimming level, hold time and detection sensitivity Easy installation Two manual switch inputs Remote controlled light scenes Designed to be a part of a KX system detection 360 +35 C Y 10 C X X:40m Y:15m 64 mm 5-95 % ABS + PC/ABS CE IP40 KX 54

KX: ARGE RAGE PIR SESOR DETECTIO RAGE 15 m 40 m CUT OUT DIMESIO 64 MM PRODUCT EBDHS-KX Article no. 760194 EECTRICA DATA Sensor type PIR Sensor model KX Voltage 30V DC Max. load - Max no. of ballasts - IP class IP40/ IP65 m packaging Power consumption passive 23,2MA Power consumption active 23,2MA Operating temperature -10 C +35 C Features Detection range Ø: 40 m/h: 15 m on/off, (non-floating contact) - Channel 2 dim - Push button input Motion detection by default Presence detection by setting Semi-automatic mode Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode - Detection indication Setting indication Delay time, stepless 10 sec - 30 min Dimmer memory (last manual setting) - Corridor function - Auto burn-in of - fluorescent tubes SETTIG Control knob sensor Remote control UCDHS Remote control, user UHS5/UHS7 GEERA Dimensions (Diameter/depth mm) 76/65 Product weight (kg) 0,16 kg Colour White RA 9003 Guarantee 5 years ACCESSORIES Ceiling mounting bracket DBB Wall mounting bracket DBB-WBRKT + - ACCESSORIES + - 1 1 2 CEIIG BRACKET, SMA DBB ART. 760132 COM COM T2 T1 WIRE DIAGRAM KX SYSTEM WA BRACKET, SMA DBB-WBRKT ART. 760081 30 V DC 55

KX: UIVERSA HF SESOR PIR PRESECE SESORS KX: Universal HF Sensor A high quality sensor developed for KX system Aura ight s KX Universal HF Sensor is the perfect solution for any office installation. Even the smallest movements can be detected by the nearly invisible sensor. The lighting, heating or ventilation can be controlled by this sensor if it is a part of a KX Bus system. The sensor is suitable for meeting rooms, offices, restrooms and warehouses. The KX Corridor HF Sensor has manual input switches which makes it easy to manually control the sensor if needed. Detection range up to 360 O /16 m at a mounting height 2.8 m ow convex profile, for nearly invisible installation Semi- and fully automatic function ETS software can be downloaded from auralight.com KX activation programmed through the button on the sensor or by remote control Stepless dimming level, hold time and detection sensitivity Remote controlled for professional commissioning Available versions: on&off/dali/dsi/ 1-10V/ An10 /KX Factory Preset for plug & play Two manual switch inputs Remote controlled light scenes User-configurable logic functions and timers 5.8GHz microwave frequency detection 360 Y X X:16m Y:2,8m 64 mm +35 C 10 C IP40 CE KX 5-95 % ABS + PC/ABS 56

KX: UIVERSA HF SESOR DETECTIO AREA 76 8 65 2.8 m CUT OUT DIMESIO 64 mm 12-16 m 76 8 65 PRODUCT Article no. 760196 TECHICA DATA Sensor type HF 5,8 GHz Sensor model KX Voltage 30V/DC Max. load - Max no. of ballasts - IP class IP40 Power concumption passive 23,2mA Power concumption active 23,2mA Operation temperature -10 C +35 C Features Detection range Ø: 16 m/h: 2,8 m on/off, (non-floating contact) - Channel 2 dim - Push button input Motion detection by default Presence detection by setting Semi-automatic mode Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode - Detection indication Setting indication Delay time, stepless 10 sec - 30 min Dimmer memory (last manual setting) - Corridor function - Auto burn-in of - fluorescent tubes SETTIG Control knob sensor Remote control UCDHS Remote control, user UHS5/UHS7 GEERA Dimensions (diameter/depth mm) 76/65 Product weight 0,16 kg Colour White RA 9003 Guarantee 5 years ACCESSORIES Ceiling mounting bracket DBB Wall mounting bracket DBB-WBRKT MWS6-KX + - + - 1 1 2 ACCESSORIES COM CEIIG BRACKET, SMA DBB ART. 760132 COM T2 T1 WIRE DIAGRAM KX SYSTEM WA BRACKET, SMA DBB-WBRKT ART. 760081 30 V DC 57

KX: CORRIDOR HF SESORS PIR PRESECE SESORS KX: Corridor HF Sensor Sensor with a long and narrow detection developed for KX system Aura ight s KX Corridor HF Sensor is the perfect solution for long detection areas like corridors. Even the smallest movements can be detected by the nearly invisible sensor when the antenna is clapped-in. The movable antenna makes the sensor flexible for a variety of mounting places. The lighting, heating or ventilation can be controlled by this sensor if it is a part of a KX Bus. It is a suitable sensor for meeting rooms, offices, restrooms, warehouses or car parks. Detection range up to 30 x 6 m at mounting height 2.8 m ETS software can be downloaded from auralight.com KX activation programmed through the button on the sensor or by remote control Daylight linking function Semi- and fully automatic function Stepless dimming level, hold time and detection sensitivity Remote controlled for professional commissioning Available versions: on&off/dai/dsi/ 1-10V/ A10 /KX Factory Preset for plug & play ow convex profile Two manual switch inputs Remote controlled light scenes Designed to be a part of a KX system 10.525GHz detection range +35 C 10 C microwave frequency X Y X:30m X:22m Y: Y:6m 74 mm 5-95 % IP40 CE KX ABS + PC/ABS 58

KX: CORRIDOR HF SESOR DETECTIO RAGE 2.8 m 6 m 30 m 85 2.8 m 0-90 O CUT OUT DIMESIO 74 mm 6 m 92 PRODUCT MWS3-KX Code Suffix Region MWS3-KX Article no. Depends on region TECHICA DATA Sensor type 10,525 GHz Sensor model KX Article no. 760195 Voltage 30V/DC Max. load - Max. no. of ballasts - IP class IP40 Power consumption passive 23,2 ma Power consumption active 23,2 ma Operating temperature -10 C +35 C Features Detection range 30x6 m / h 2,8 m on/off, (non-floating contact) - Channel 2 dim - Push button input Motion detection by default Presence detection by setting Semi-automatic mode Adjustable sensitivity ux switching on & off Separate sensitivity for active & passive mode - Detection indication Setting indication Delay time, stepless 10 sec - 30 min Dimmer memory (last manual setting) - Corridor function - Auto burn-in of - fluorescent tubes SETTIG Control knob sensor Remote control UCDHS Remote control, user UHS5/UHS7 GEERA DATA Dimensions (diameter/depth mm) 76/65 + - R2 Australia and all of Europe 760203 except: UK, France, Portugal, Germany, Switzerland, Austria, Slovak Republic, Republic of Ireland R3 France, Portugal, Switzerland 760204 R4 Germany, Austria, Slovak Republic 760205 + - 1 1 2 COM COM T2 T1 WIRE DIAGRAM KX SYSTEM 30 V DC Product weight 0,16 kg Colour White RA 9003 Guarantee 5 years ACCESSORIES Ceiling mounting bracket MWS3A-DBB Wall mounting bracket MWS3A-DBB-WBRKT ACCESSORIES CEIIG BRACKET, ARGE MWS3A-DBB ART. 760133 WA BRACKET, ARGE MWS3A-DBB-WBRKT ART. 760080 59

DAI SWITCH & DIM COTRO DAI Switch & Dim Control Easy control by manual dimming or recalling of light scenes This unique control is more than a simple DAI based dimmer. By using a simple dim-up and dim-down function this control recalls programmed light scenes via push buttons 1 to 4. The default setting of light scenes like 100% /75% /50% / 25% can be easily be adjusted to your needs. By press and hold programing no further tool is needed to program the wished light level. The on/off center button memorizes the last used scene which will be indicated by the integrated green EDs to switch on the lights. This DAI control is perfect for light control in small offices and meetings rooms with up to 20 DAI or DSI controlled luminaries. The remote control UHS7 can be used to control the DAI dim-switch. DAI and DSI broadcast protocol selectable Possibility to control up to 20 DAI /DSI ballasts Default setting for plug & play Pre-set light scenes of 100% /75%/50%/ 25% Easy Push & Hold programming with ED indication Remote control function (UHS 7) Recessed and flush mounted options +350C DAI/DSI 230VAC +/ 10% 50Hz 100C 5-95% CE CASS II ABS + PC/ABS 60

DAI SWITCH-DIM COTRO XXXXX XXXXXX XXX 86 mm 86 mm 13 mm 23.5 mm PRODUCT Article no. 760060 EECTRICA DATA Control standard DAI SWITCH-DIM COTRO DAI/DSI Control protocol Broadcast Voltage 230VAC +/- 10% Max. no. of ballasts 20 IP class IP20 Power consumption passive 0,51 W Power consumption active 0,53 W Operation temperature -10ºC to 35ºC FEATURES Adjustable light scene Preset light scenes umber of set scenes 4 Stepless dim up /down ED indication Dimmer memory (last man. level) o Auto burn-in of fluorescent tubes o SETTIG Control knob Remote control UHS 5 /UHS 7 GEERA DATA Dimensions (Diameter/depth mm) 86/86 Product weight (kg) 0.1 Colour White RA 9003 Guarantee 5 years ACCESSORY Wall mounting box GIPB/RD 230V /AC + - DAI ACCESSORY WA BOX GIPB/RD ART. 760156 Electronic Ballast DIM Electronic Ballast DIM Electronic Ballast DIM DAI SWICH-DIM COTRO 61

General accessories Profi-handset For advanced programming of all functions of our Standlone, wireless and KX Sensors as well as the wireless A10 range. CD display for clear programming including Read back of current settings. Programs, macros, can be created, named and saved. Can be updated via USB port. UCDHS Art. 760136 Compact programmable handset For wireless programming of the most common functions. After initial setup, the remote control can be locked so that only user functions are accessible. UHS5 Art. 760190 A10 Compact programmable handset For wireless programming of the most common functions in the A10 range. After initial setup, the remote control can be locked so that only user functions are accessible. UHS4 Art. 760166 Building Manager handset Simple tool to adjust programmed settings like delay time, dim level and light scenes and to recall these functions. UHS6 Art. 760118 User handset For recall of light scenes, on/off dim up & down function. UHS7 Art. 760137 User handset for PIR Wall Sensor For recall of light scenes, on/off dim up & down function. E-3007 Art. 760155 62

Bracket for surface-mounted installation Add these bracketes for surface mounted installation of all sensors in the range. Enables ceiling or wall installation. Both small and large ceiling bracket is supplied with spacer ring with room for extra cabling. Ceiling bracket, Small DBB (Art. 760132) Compatible with: Universal PIR sensor, recessed arge range PIR sensor Cold Area Sensors High Bay PIR sensor Universal HF sensor Bracket for Cold Area Sensor Combatible with: EBD-ECIP1 Cold Area PIR Sensor (Art. 760070) Wall bracket, Small DBB-WBRKT (Art.760081) Ceiling bracket, arge MWS3A-DBB (Art.760133) Compatible with: Universal HF sensor arge range PIR sensor Cold Area Sensors High Bay PIR sensor Universal HF sensor Compatible with: Corridor HF sensor Wall bracket, arge MWS3A-DBB- WBRKT (Art. 760080) Compatible with: Corridor HF sensor Wall bracket GIPB/RD (Art. 760156) Compatible with: Wall HF sensor Wall PIR sensor Protective frame brushed steel E-3008 (Art. 760153) Compatible with: Wall PIR sensor Protective frame brushed bronze E-3009 (Art. 760154) Compatible with: Wall PIR sensor 63

A10 Wireless Sensor components A10 SWITCH & DIM COTRO 86 mm 86 mm 12V/DC -+ + - 13 mm 23.5 mm PRODUCT AR-SG-SB ACCESSORIES Article no. 760207 EECTRICA DATA Voltage 12 VDC / 3V Battery IP Class IP40 power consumption active 0,05 W Power consumption passive 0,00 W Broadband 868 MHZ Operation range (outdoor) > 30 m Operation temperature -10-35 C FEATURES Push button input 5 Setting indication SETTIG Control knob on sensor - Remote control UCDHS Remote control, user UHS4 GEERA DATA Dimensions (Diameter/depth mm) 86/86/36.5 Product weight (kg) 0.10 Colour White Guarantee 5 years ACCESSSORY Sensors MWS3A-AT / EBDSPIR-AT/EBDHS-AT Relay module AT-S-R / AT-S-DDR / AT-S- ADR UIVERSA PIR SESOR ART. 760180 ART. 760139 ART. 760138 ART. 760140 CORRIDOR HF SESOR ART. DEPEDS O REGIO, SEE SEPARATE PRODUCT SHEET ARGE RAGE PIR SESOR ART. 760109 ART. 760089 ART. 760111 WA BOX GIPB/RD ART. 760156 64

XXXXX XXXXXX XXX DIMESIOS A10 WIREESS SWITCH MODUE A 10 WIREESS TRASMITTER 50.1 19.2 22 46 An-10 PRODUCT AT-BB-I EECTRICA DATA Article no. 760167 Voltage 12 VDC / 3V Battery IP Class IP 20 power consumption active 0,05 W Power consumption passive 0,00 W Broadband 868 MHZ Operation range (outdoor) > 30 m Operation temperature 0-35C FEATURES Push button input 7 Setting indication SETTIG Control knob on sensor - Remote control UCDHS Remote control, user UHS4 GEERA DATA Dimensions (Diameter/depth mm) 95/55/22 Product weight (kg) 0.10 Colour Green Guarantee 5 years ACCESSSORY Sensors MWS3A-AT / EBDSPIR-AT/EBDHS-AT Relay module AT-S-R / AT-S-DDR / AT-S- ADR A10 WIREESS SWITCH MODUE A10 switch module. This module is used to connect switches to the A10 system. The modules transmits signals to any A10 sensor or relay in the system. The module has inputs for up to 7 push buttons. AT-BB-I Placed in mounting bracket behind the switch. Inputs for up to 7 push buttons* Can be used with a push button and/or shutter switch Integrated battery that lasts up to 7 years of normal use. Alternative to integrated battery is 12 V DC power supply. *Create a simple panel with separate push buttons for preset scenarios. E.g. Button 1: Field of play 100% Button 2: Field of play 75% Button 3: Stands 100% Button 4: Stands 25% - Etc. up to 7 per module. Each button can be assigned a unique function or scenario. 65

DIMESIOS ITEGRATED RECEIVER 133 WIRE DIAGRAM ITEGRATED AD EXTERA REAY AD & DD VERSIO 146 4 22. 5 2 230V /AC 20. 5 Electronic Ballast DIM + - Channel 2 DIMESIOS EXTERA RECEIVER Receiver 20. 5 22. 5 An-10 184 PRODUCT AT-S-R AT-S-DDR AT-S-ADR AT-S-R-SA AT-S-DDR- R-SA AT-S-ADR- AD-SA Article no. 760168 760170 760172 760169 760171 760173 EECTRICA DATA Type On/Off DAI 1-10V On/Off DAI 1-10V Voltage 230V AC 50 Hz 230V AC 50 Hz 230V AC 50 Hz 230V AC 50 Hz 230V AC 50 Hz 230V AC 50 Hz Max. load 2 A 2 A 2 A 2 A 2 A 2 A Max. no. of ballasts 20 20 if only channel 2 is used. (otherwise 10) 10 20 20 if only channel 2 is used. (otherwise 10) 10 IP class IP20 IP20 IP20 IP 20 IP 20 IP 20 Power consumption passive 0,51 W 0,51 W 0,51 W 0,51 W 0,51 W 0,51 W Power consumption active 0,53 W 0,53 W 0,53 W 0,53 W 0,53 W 0,53 W Broadband 868 MHz 868 MHz 868 MHz 868 MHz 868 MHz 868 MHz Operation range (indoor) > 30 m > 30 m > 30 m > 30 m > 30 m > 30 m Operation temperature 0 C - 35 C 0 C - 35 C 0 C - 35 C 0 C - 35 C 0 C - 35 C 0 C - 35 C FEATURES on/off Channel 2 dim - - Push button input Via AT-BB-I Via AT-BB-I Via AT-BB-I Via AT-BB-I Via AT-BB-I Via AT-BB-I Setting indication Auto burn-in of fluorescent - - tubes SETTIG Control knob on sensor - - - Remote control UCDHS UCDHS UCDHS UCDHS UCDHS UCDHS Remote control, user UHS4 UHS4 UHS4 UHS4 UHS4 UHS4 GEERA DATA Dimensions (Diameter/ 133/22/20.5 133/22/20.5 133/22/20.5 184/22.5/20.5 184/22.5/20.5 184/22.5/20.5 depth mm) Product weight (kg) 0.10 0.10 0.10 0.12 0.12 0.12 Colour Green Green Green Green Green Green Guarantee 5 years 5 years 5 years 5 years 5 years 5 years ACCESSSORY Sensors MWS3A-AT / EBDSPIR-AT/ EBDHS-AT MWS3A-AT / EBDSPIR-AT/ EBDHS-AT MWS3A-AT / EBDSPIR-AT/ EBDHS-AT MWS3A-AT / EBDSPIR-AT/ EBDHS-AT MWS3A-AT / EBDSPIR-AT/ EBDHS-AT MWS3A-AT / EBDSPIR-AT/ EBDHS-AT A10 WIREESS RECEIVER Wireless lighting receiver is installed in the luminaire and receives a wireless signal from one or more A10 sensors. It has a two-way communication with other A10 units in the system, providing a high level of reliability. One benefit is that the lighting control system can combine on/off, DAI, DSI and 1-10 V products. Suitable for installation in all kinds of luminaires. AT-S-R/AT-S-RA-SA Wireless communication with all other A10 units Fully automated auto on/off Semi-automated manual on/auto off (absence control) Control 2 A load Programmable via programming handset Stepless time delay AT-S-DDR / AT-S-ADR/AT-S-DDR-SA/ AT-S-ADR-SA Features in addition to the above For external installations like in recessed ceilings Switch module AT-BB-I AT-BB-I AT-BB-I AT-BB-I AT-BB-I AT-BB-I 66

Settings/Commissioning for wired systems Our PRM, DD / AD sensors are programmed with factory settings that will suit most applications. This enables a more easy and efficient installation. Just connect the load and voltage to the sensor and the installation is complete. There is a possibility to pre-install because the connection terminals are removable. The factory settings for both on / off and dim sensors are: Fully automatic ights up regardless the light level (lux on 9) Delay time 20 minutes Sensitivity/range Max, (Sensitivity 9) The dim sensors have additional settings: Daylight linking level 600 Set for DAI The most common change is to change the presence detection to semi-automatic/absence detection, thus lighting up manually and either switch it off manually or let the sensor turn of the lighting after the delay time. How to change to semi-automatic: 1. Without programming tools: press and release the button 5 times within 1 minute after power is turned on. The sensor confirms the setting which you can easily see when the diode steadily lights up for 30 seconds. 2. With UHS5: Press shift and ABS (absence) button 3. With UCDHS: go to the menue to for the right product and go to Detection mode chose Absence. Do you want to change the delay time? 1. With UHS5: press time out mins and choose how many minutes you want 2. With UCDHS: go to the menue for the right product press Time Out and choose 1-99 min. Do you want to change so that the sensor do not turn on if there is enough light in the room? 1. With UHS5: Press ux on level 1-9. At 9 the sensor lights up regardless of the light level. 2. With UCDHS: go to the menue for the right product and to ux On level, choose 1-9 minutes. Do you want the sensor to turn off if there is enough natural light in the room? 1. With UHS5: press ux Off level 1-9. At 9 it does not turn off, regardless the light level. 2. With UCDHS: go to the menue for the right product and to ux On level, choose 1-9. Do you want to creade a corridor step with your corridor sensor, so that the sensor dims down to a predetermined lowe level after the set time delay?: 1. With UCDHS: go to the menue for the right product and choose Fade Value, choose 1-99. These numbers referes to the dim level % of the light source. Then go to Fade mins 0-99, choose how many minutes it will be on. If you select 0 the light level will be permanent and will not dim dowm. 67

O/OFF PRM DEFAUT PROGRAMMIG EXAMPE 100 % 230V /AC 1 2 0 % 20 min DIM DEFAUT PROGRAMMIG EXAMPE 100 % 230V /AC DIM Electronic Ballast ` + - DOW UP Channel 2 0 % 20 min + 10s DIM DEFAUT PROGRAMMIG EXAMPE 100 % DIM DIM Electronic Ballast ` + - DOW UP T1 T2 Channel 2 0 % 20 min + 10s 68

MASTER- SAVE FUCTIO FOR DIM SESORS Master Outout : on off > 700 UX < 400 UX > 550 UX > 650 UX < 550 UX < 400 UX + 100 % Slave 500 UX 0 % 20 min 230V /AC Electronic Ballast DIM + - DOW UP + - DOW UP Channel 2 Channel 2 Master Slave MASTER- SAVE FUCTIO WITH CORRIDOR FUCTIO (1 &2 STEP) Master Outout : on off 100 % t <1s Slave 0 % t Electronic Ballast DIM + - DOW UP + - DOW UP Channel 2 Channel 2 Master 1 Slave Master : PRM or AD/DD used CH1 umber of Master not limited (all have to use same phase!) + - DOW UP Slave : DD/AD sensors or AC- Sensor Master 2 n Channel 2 The relay switches by triggering of Masters. Switched delay time (t) of <1s forces a re-start of slave (ight 100%) 69