Via Gorizia, 9 20813 Bovisio Masciago (MI), Italy Tel +39 0362 593584 Fax +39 0362 591611 kobra@elcoman.it TS SERIES UNI EN ISO 9001:2000 Cert. No. 9105.EL 16 Technical Data as of 01/2011 Specifications in this publication are subject to change without notice AD. ALESSANDRO FARINA PH. GIANNI FRIGERIO CT-153/12/09.06.2011 Authorized Dealer MADE IN ITALY
TS - TECHNOLOGY The new range of KOBRA TS shredders with Touch Screen Technology is the most technologically advanced on the market today. KOBRA TS shredders come with an EPC Electronic Power Control system. By means of a series of illuminated optical indicators, the operator can control the shredding load, avoid jams and optimize shredding. Illuminated optical indicators on the Touch Screen panel show the current status of the machine or Energy Smart lights up when the machine is into power saving stand-by mode. Functions are activated by simply touching the required command on the Touch Screen. There is also a light to warn the operator when the cutting knives need to be oiled. In shredders with an automatic oiler, a light comes on when the oil container is empty. EPC- Electronic Power Control Shows the shredding load required to optimise shredding without jams (2, 270, 310, 410TS series) Illuminated optical indicators Clearly show the current status of the machine Touch Screen Technology All controls are activated by simply touching the panel. Keep your finger on the Forward control for 5 seconds and the machine will operate for 30 seconds when transparent material needs to be shredded. A warning light comes on when the cutting knives need oiling. 2
Two separate sets of cutting knives Two entry openings and two sets of cutting knives for the separate insertion and shredding of paper, Cds, DVDs, and credit cards and separation of shredded material into two bins TS - TECHNOLOGY To understand how advanced the technology in the KOBRA TS series actually is, just take a look at the innovative systems they come equipped with: Energy Smart is the most advanced energy saving system around. When the machine has not been used for just eight seconds, the shredder goes into automatic power saving stand-by mode and can be restarted by simply inserting material into the machine to be shredded. When the machine has not been used for four hours, it automatically disconnects from the mains power supply and even switches off the Energy Smart light so the machine is not left on when nobody is in the office. Automatic Reverse System comes on when too much material is inserted into the shredder and puts the machine into automatic reverse. Continuous duty shredding 24 hours a day. Special motors can operate 24 hours a day non-stop without overheating, allowing for continuous shredding and maximum daily shredding load. Two sets of cutting knives for separate shredding of paper, CDs, DVDs and credit cards, and separating the shredded material into two bins. (2, 270, 310, 410 TS series) Automatic Feeder to shred single sheets of paper up to A3 size Just insert the documents to shred into the automatic feeder and the KOBRA 310 TS-AF will shred automatically each document and turn into its stand-by position when shredding is completed Automatic disconnection from the mains. No longer any need to switch off the shredder before leaving the office. Maximum power saving. 4
TS - TECHNOLOGY The shredders in the KOBRA TS series come with a sturdy steel gears and metal chain drive system which offers superior reliability and resistance to wear in comparison with cheaper plastic chain drive systems. The development of new blade edges for the carbon hardened cutting knives in the KOBRA TS series which are unaffected by staples and metal clips, makes it possible to achieve high shred loads with low power consumption. KOBRA TS cross-cut and HS shredders can be fitted with a built-in automatic oiling system which eliminates the need for manual oiling of cutting knives. Shredders can also be fitted with the SHRED GUARD - Metal Detection System which warns when metal objects of any size are accidentally inserted into the entry opening and stops the machine before they reach the cutting knives. An illuminated optical indicator warns the operator to remove these objects in order to protect the knives. 6
TS - TECHNOLOGY Kobra 410 TS Kobra 310 TS Kobra 2 TS Kobra 270 TS Kobra 310 TS-AF Kobra 245 TS
Keep your finger on the Forward control for 5 seconds and transparent material needs to be shredded Kobra 245 TS Kobra 2 TS Touch Screen Office shredder Touch Screen Office shredder Available in 6 different versions with straight or cross cut or high security mechanism Available in 6 different versions with straight or cross cut or high security mechanism Shreds up to 29 sheets of paper (A4 70 gr.) at a time Shreds up to 30 sheets of paper (A4 70 gr.) at a time Touch Screen panel with LED indicators Touch Screen Panel ENERGY SMART power saving system: machine goes into power saving stand-by mode after just EPC - Electronic Power Control System: shows the shredding load required to optimise shredding without jams 8 seconds and switches off automatically after 4 hours of non-operation ENERGY SMART power saving system: machine goes into power saving stand-by mode after just AUTOMATIC REVERSE System in case of jamming 8 seconds and switches off automatically after 4 hours of non-operation 24 hour continuous duty motors: no duty cycle or timed cool down periods AUTOMATIC REVERSE System in case of jamming Heavy duty chain drive with steel gears SUPER POTENTIAL POWER UNIT 24 hour continuous duty motors: no duty cycle or timed cool down periods by staples and metal clips. Heavy duty chain drive with steel gears New high precision design of cutting knives allows high shred loads with low power consumption SUPER POTENTIAL POWER UNIT by staples and metal clips. New high precision design of cutting knives allows high shred loads with low power consumption 2 separate sets of cutting blades: one for Keep your finger on the Forward control for 5 seconds and the machine functions continuously for 30 seconds when transparent material needs to be shredded. paper and one for CDs, DVDs and credit cards 2 distinct integrated removable bins for separating shredded paper from plastic shreds AUTOMATIC OILING SYSTEM : automatically lubricates cutting knives () SHRED GUARD Metal Detection System: detects any type of metal which can be introduced into the shredder and stops immediately the machine preventing any possible damage to the cutting system; an illuminated optical indicator warns the operator of the presence of the metal () AUTOMATIC DISCONNECTION FROM THE MAINS No longer any need to switch off the shredder before leaving the office. Maximum power saving CUTTING KNIVES New design of carbon hardened cutting knives allows 40% more efficiency in shredding capacity with low power consumption ERGONOMIC HANDLE An easy grip sturdy handle S4 S5 C2 C4 HS HS-6 Throat width (mm) 245 245 245 245 245 245 Shred size (mm) 3,8 5,8 1,9 x15 3,9 x 40 0,8x9,5 0,8x5 Security Level DIN 32757 2 2 4 3 5 6 Sheet capacity* 25/27 20/22 27/29 22/24 11/13 9/11 21/23 16/18 6/8 5/6 4/5 3/4 CD-ROM/DVD/CREDIT CARD capacity Speed** (m/sec.) 0,05 0,07 0,07 0,07 0,08 0,08 Noise Level (dba) Waste bin volume (l) 40 40 40 40 40 40 Voltage (V/Hz) 230/50-230/50-230/50-230/50-230/50-230/50- Power (Watt) 4 4 4 4 4 4 ENERGY SMART Management System AUTOMATIC REVERSE System 24 hour continuous duty motor Automatic Start/Stop through electronic eyes Open door stop with light signal Bag full stop with light signal Motor thermal protection Dimensions (WxDxH) (cm) 40x36x 61 40x36x61 40x 36x61 40x36x 61 40x36x61 40x 36x61 26 26 27 27 28 28 ENERGY SMART Power saving system: the machine goes into automatic power saving stand-by after it has not been used for just 8 seconds and after four hours of not being used is switched off at the mains Weight (Kg) Weight (Kg) S4 S5 C2 C4 HS HS-6 Throat width (mm) 2 2 2 2 2 2 Shred size (mm) 3,8 5,8 1,9 x15 3,9 x 40 0,8x9,5 0,8x5 Security Level DIN 32757 2 2 4 3 5 6 Sheet capacity* 26/28 21/23 28/30 23/25 12/14 10/12 22/24 17/19 6/8 5/6 4/5 3/4 CD-ROM/DVD/CREDIT CARD capacity Speed** (m/sec.) 0,05 0,07 0,07 0,07 0,08 0,08 Noise Level (dba) Waste bin volume (l) Voltage (V/Hz) 230/50-230/50-230/50-230/50-230/50-230/50- Power (Watt) 4 4 4 4 4 4 ENERGY SMART Management System AUTOMATIC REVERSE System 24 hour continuous duty motor AUTOMATIC OILER SHRED GUARD Metal detection system Automatic Start/Stop through electronic eyes Open door stop with light signal Bag full stop with light signal Motor thermal protection Dimensions (WxDxH) (cm) 40x 36x80 40x36x 80 40x36x80 40x 36x80 40x36x 80 40x36x80 30 30 31 31 32 32 * Capacity may differ in Hz machines **Speed calculated at Hz as knife outside diameter x rpm * Capacity may differ in Hz machines **Speed calculated at Hz as knife outside diameter x rpm * Capacity rated with lubricated cutting knives * Capacity rated with lubricated cutting knives TWO SEPARATE SETS OF CUTTING KNIVES Two entry openings and two sets of cutting knives for the separate insertion and shredding of paper, Cds, DVDs, and credit cards and separation of shredded material into two bins UNI EN ISO 9001:2000 Cert. No. 9105.EL 16 UNI EN ISO 9001:2000 Cert. No. 9105.EL 16 10 11
Keep your finger on the Forward control for 5 seconds and transparent material needs to be shredded. Kobra 270 TS Kobra 310 TS Touch Screen Office shredder Touch Screen Office shredder Available in 6 different versions with straight or cross cut or high security mechanism Available in 6 different versions with straight or cross cut or high security mechanism Shreds up to 32 sheets of paper (A4 70 gr.) at a time Shreds up to 47 sheets of paper (A4 70 gr.) at a time Touch Screen Panel Touch Screen Panel EPC - Electronic Power Control System: shows the shredding load required to optimise shredding without jams ENERGY SMART power saving system: machine goes into power saving stand-by mode after just 8 seconds and switches off automatically after 4 hours of non-operation EPC - Electronic Power Control System: shows the shredding load required to optimise shredding without jams ENERGY SMART power saving system: machine goes into power saving stand-by mode after just 8 seconds and switches off automatically after 4 hours of non-operation AUTOMATIC REVERSE System in case of jamming AUTOMATIC REVERSE System in case of jamming 24 hour continuous duty motors: no duty cycle or timed cool down periods 24 hour continuous duty motors: no duty cycle Heavy duty chain drive with steel gears or timed cool down periods SUPER POTENTIAL POWER UNIT Heavy duty chain drive with steel gears SUPER POTENTIAL POWER UNIT by staples and metal clips. New high precision design of cutting knives allows by staples and metal clips. New high precision high shred loads with low power consumption design of cutting knives allows high shred loads 2 separate sets of cutting blades: with low power consumption one for paper and one for CDs, DVDs and credit cards 2 separate sets of cutting blades: one for paper Keep your finger on the Forward control for 5 seconds and 2 distinct integrated removable bins for and one for CDs, DVDs and credit cards separating shredded paper from plastic shreds 2 distinct integrated removable bins for transparent material needs to be shredded. AUTOMATIC OILING SYSTEM : separating shredded paper from plastic shreds automatically lubricates cutting knives () AUTOMATIC OILING SYSTEM : SHRED GUARD Metal Detection System: automatically lubricates cutting knives detects any type of metal which can be introduced (included on Kobra 310 HS / HS-6, into the shredder and stops immediately on other models) the machine preventing any possible damage SHRED GUARD Metal Detection System: to the cutting system; an illuminated optical detects any type of metal which can be introduced indicator warns the operator of the presence into the shredder and stops immediately of the metal () the machine preventing any possible damage to the cutting system; an illuminated optical indicator warns the operator of the presence of the metal () EASY TO REMOVE BAG Slide out tracks make it easy to empty the two waste collection bags TWO SEPARATE SETS OF CUTTING KNIVES Two entry openings and two sets of cutting knives for the separate insertion and shredding of paper, Cds, DVDs, and credit cards and separation of shredded material into two bins ERGONOMIC HANDLE An easy grip sturdy handle S4 S5 C2 C4 HS HS-6 Throat width (mm) 270 270 270 270 270 270 Shred size (mm) 3,8 5,8 1,9 x15 3,9 x 40 0,8x9,5 0,8x5 Security Level DIN 32757 2 2 4 3 5 6 Sheet capacity* 27/29 30/32 12/14 23/25 8/10 4/5 22/24 24/26 10/12 18/20 7/8 3/4 CD-ROM/DVD/CREDIT CARD capacity Speed** (m/sec.) 0,06 0,07 0,06 0,07 0,07 0,08 Noise Level (dba) Waste bin volume (l) 110 110 110 110 110 110 Voltage (V/HZ) 230/50-230/50-230/50-230/50-230/50-230/50- Power (Watt) 4 4 4 4 4 4 ENERGY SMART Management System AUTOMATIC REVERSE System 24 hour continuous duty motor AUTOMATIC OILER SHRED GUARD Metal detection system Automatic Start/Stop through electronic eyes Open door stop with light signal Bag full stop with light signal Motor thermal protection Dimensions (WxDxH) (cm) 53x43x 88 53x43x88 53x 43x88 53x43x 88 53x43x88 53x 43x88 Weight (Kg) 45 45 46 46 47 47 EASY TO REMOVE BAG Slide out tracks make it easy to empty the two waste collection bags TWO SEPARATE SETS OF CUTTING KNIVES Two entry openings and two sets of cutting knives for the separate insertion and shredding of paper, Cds, DVDs, and credit cards and separation of shredded material into two bins SS4 SS5 CC2 CC4 HS HS-6 Throat width (mm) 310 310 310 310 310 310 Shred size (mm) 3,8 5,8 1,9 x15 3,9 x 40 0,8x9,5 0,8x5 Security Level DIN 32757 2 2 4 3 5 6 Sheet capacity* 37/39 45/47 17/19 29/31 11/13 5/6 31/33 37/39 14/16 25/27 10/11 4/5 CD-ROM/DVD/CREDIT CARD capacity Speed** (m/sec.) 0,08 0,08 0,07 0,07 0,08 0,08 Noise Level (dba) 58 58 58 58 58 58 Waste bin volume (l) 135 135 135 135 135 135 Voltage (V/HZ) 230/50-230/50-230/50-230/50-230/50-230/50- Power (Watt) 920 (2x4) 920 (2x4) 920 (2x4) 920 (2x4) 920 (2x4) 920 (2x4) ENERGY SMART Management System AUTOMATIC REVERSE System 24 hour continuous duty motor AUTOMATIC OILER SHRED GUARD Metal detection system Automatic Start/Stop through electronic eyes Open door stop with light signal Bag full stop with light signal Motor thermal protection Dimensions (WxDxH) (cm) 53x 43x96 53x43x 96 53x43x96 53x 43x96 53x43x 96 53x43x96 Weight (Kg) 53 53 57 57 * Capacity may differ in Hz machines **Speed calculated at Hz as knife outside diameter x rpm * Capacity may differ in Hz machines **Speed calculated at Hz as knife outside diameter x rpm * Capacity rated with lubricated cutting knives * Capacity rated with lubricated cutting knives AUTOMATIC REVERSE System Warns when too much material is inserted into the shredder and automatically puts the machine into reverse UNI EN ISO 9001:2000 Cert. No. 9105.EL 16 UNI EN ISO 9001:2000 Cert. No. 9105.EL 16 12 13
Keep your finger on the Forward control for 5 seconds and transparent material needs to be shredded. AUTOMATIC FEEDER Automatically shreds single sheets of paper up to the A3 size. Just insert the documents to shred into the automatic feeder and the KOBRA 310 TS-AF will shred automatically each document and turn into its stand-by position when shredding is completed THREE SHREDDING FUNCTIONS 1. Shreds up to 31 sheets at a time into the dedicated 310 mm throat. 2. Shreds up to 170 sheets through the Automatic Feeder. 3. Shreds CDs/DVDs and Credit Cards through its dedicated second set of cutting knives EASY TO REMOVE BAG Slide out tracks make it easy to empty the two waste collection bags Kobra 310 TS-AF Kobra 410 TS Automatic Feeder- Touch Screen Office shredder Touch Screen Heavy Duty Office shredder Available in 4 different versions with cross cut or high security cut Available in 5 different versions with straight or cross cut or high security mechanism Shreds up to 31 sheets of paper (A4 70 gr.) at a time into its 310 mm throat Shreds CD/DVD and Credit Cards in cross cut or in High security cut 1,5 x 2,5 mm Automatically shreds up to 170 sheets through Powerful 2.0 Watt motor the special Automatic Feeder without any jam EPC - Electronic Power Control System: shows the shredding Touch Screen panel load required to optimise shredding without jams ENERGY SMART power saving system: Touch Screen Panel machine goes into power saving stand-by mode ENERGY SMART power saving system: after just 8 seconds and switches off machine goes into power saving stand-by mode automatically after 4 hours of non-operation after just 8 seconds and switches off AUTOMATIC REVERSE System in case of jamming automatically after 4 hours of non-operation 24 hour continuous duty motors: no duty cycle AUTOMATIC REVERSE System in case of jamming or timed cool down periods 24 hour continuous duty motors: no duty cycle Heavy duty chain drive with steel gears or timed cool down periods SUPER POTENTIAL POWER UNIT Heavy duty chain drive with steel gears SUPER POTENTIAL POWER UNIT by staples and metal clips. New high precision Keep your finger on the Forward control for 5 seconds and design of cutting knives allows high shred loads by staples and metal clips. New high precision transparent material needs to be shredded. with low power consumption design of cutting knives allows high shred loads 2 separate sets of cutting blades: one for paper with low power consumption and one for CDs, DVDs and credit cards 2 separate sets of cutting blades: one for paper 2 distinct integrated removable bins for and one for CDs, DVDs and credit cards separating shredded paper from plastic shreds 2 distinct integrated removable bins for AUTOMATIC OILING SYSTEM : separating shredded paper from plastic shreds automatically lubricates cutting knives AUTOMATIC OILING SYSTEM : (included on Kobra 310 AF HS / AF HS-6, automatically lubricates cutting knives on other models) SHRED GUARD Metal Detection System: detects any type of metal which can be introduced into the shredder and stops immediately the machine preventing any possible damage to the cutting system; an illuminated optical indicator warns the operator of the presence of the metal () AF C2 AF C4 AF HS AF HS-6 Throat width (mm) 310 310 310 310 Shred size (mm) 1,9 x15 3,9 x 40 0,8 x 9,5 0,8 x 5 Security Level DIN 32757 4 3 5 6 Sheet capacity* 17/19 14/16 29/31 25/27 11/13 10/11 5/6 4/5 Automatic Feeder capacity 170 150 CD-ROM/DVD/CREDIT CARD capacity Speed** (m/sec.) 0,07 0,07 0,08 0,08 Noise Level (dba) 58 58 58 58 Waste bin volume (l) 135 135 135 135 Voltage (V/HZ) 230/50-230/50-230/50-230/50- Power (Watt) 920 (2x4) 920 (2x4) 920 (2x4) 920 (2x4) ENERGY SMART Management System AUTOMATIC REVERSE System 24 hour continuous duty motor AUTOMATIC OILER Automatic Start/Stop through electronic eyes Open door stop with light signal Bag full stop with light signal Motor thermal protection Dimensions (WxDxH) (cm) 53 x 43 x 103 53 x 43 x103 53 x 43 x103 53 x 43 x 103 Weight (Kg) 57 57 59 59 170 150 170 150 170 150 205 LITER STEEL CABINET Sturdy and large volume steel cabinet equipped with a dedicated oil container holder TWO SEPARATE CUTTING KNIVES Two entry openings and two sets of cutting knives for the separate insertion and shredding of paper, Cds,DVDs and credit cards and separation of shredded material (Cross Cut for models S5,C2 and C4, High Security cut of 1,5 X 2,5 mm for models HS and HS-6) S5 C2 C4 HS HS-6 Throat width (mm) 410 410 410 410 410 Shred size (mm) 5,8 1,9 x15 3,9 x 40 0,8x 9,5 1x5 Security Level DIN 32757 2 4 3 5 6 Sheet capacity* 68/72 /64 30/32 27/29 54/56 48/50 20/22 18/20 12 10 CD-ROM/DVD/CREDIT CARD capacity cross-cut cross-cut cross-cut HS 1,5 x 2,5 mm HS 1,5 x 2,5 mm Speed** (m/sec.) 0,1 0,1 0,1 0,1 0,1 Noise Level (dba) 63 63 63 63 63 Waste bin volume (l) 205 205 205 205 205 Voltage (V/HZ) 230/50-230/50-230/50-230/50-230/50- Power (Watt) 20 20 20 20 20 ENERGY SMART Management System AUTOMATIC REVERSE System 24 hour continuous duty motor AUTOMATIC OILER SHRED GUARD Metal detection system Automatic Start/Stop through electronic eyes Open door stop with light signal Bag full stop with light signal Motor thermal protection Dimensions (WxDxH) (cm) x 48 x 100 x 48 x 100 x 48 x 100 x 48 x 100 x 48 x 100 Weight (Kg) 98 113 113 116 116 * Capacity may differ in Hz machines **Speed calculated at Hz as knife outside diameter x rpm * Capacity may differ in Hz machines **Speed calculated at Hz as knife outside diameter x rpm * Capacity rated with lubricated cutting knives * Capacity rated with lubricated cutting knives AUTOMATIC DISCONNECTION FROM THE MAINS. No longer any need to switch off the shredder before leaving the office. Maximum power saving UNI EN ISO 9001:2000 Cert. No. 9105.EL 16 UNI EN ISO 9001:2000 Cert. No. 9105.EL 16 14 15