ROLLSROLLER ORIGINAL CUTTING MAT

ROLLSROLLER ORIGINAL CUTTING MAT Unique design High quality Controlled surface roughness Delivered oversized (when installed, the mat should be cut to exact worktable size) A UNIQUE DESIGNED self-healing cutting mat is included in your ROLLSROLLER. Custom made original cutting can be used on any worktable and is available in any size. A worn cutting mat may affect lamination quality, don t forget to replace when worn. MODEL DIMENSION Cutting mat 280/145 2 800 x 1 450 mm /9ft. 2 in. X 4ft. 9in. 10071 Cutting mat 340/145 3 400 x 1 450 mm / 11ft 2in X 4ft. 9in. 10237 Cutting mat 340/170 3 400 x 1 700 mm / 11ft 2in X 5ft. 7in. 10301 Cutting mat 400/145 4 000 x 1 450 mm / 13ft. 2in. X 4ft 9in. 10345 Cutting mat 400/150 4 000 x 1 500 mm / 13ft. 2in. X 4ft. 1in. 10070 Cutting mat 400/170 4 000 x 1 700 mm / 13ft. 2in. X 5ft. 7in. 10220 Cutting mat 540/170 5 400 x 1 700 mm / 17ft. 9in. X 5ft. 7in. 10073 Cutting mat 540/220 5 400 x 2 200 mm / 17ft. 9in. X 7ft. 3in. 10072 Cutting mat 605/170 6 050 x 1 700 mm / 19ft. 9in. X 5ft. 7in. 10075 Cutting mat 1080/170 10 800 x 1 700 mm /35ft. 5in. X 5ft. 7in. 10076 MODEL DIMENSION Custom made cutting mat 150* Maximum width 1 500 mm / 4ft. 1in. - Custom made cutting mat 173* Maximum width 1 730 mm / 5ft. 8in. - Custom made cutting mat 220* Maximum width 2 200 mm / 7ft. 3in. - *Price is calculated based on length. Maximum lenght 22 000 mm / 72ft. 2in. HEADQUATERS: info@

ROLLSROLLER SCISSOR Durable Sharp THE ORIGINAL ROLLSROLLER scissor delivered with all the ROLLSROLLER Flatbed Applicators MODEL ROLLSROLLER Scissor 10078 HEADQUATERS: info@

LONG REACH CUTTER Safe to use - the blade is protected to prevent cutting your fingers or cut into rollers. Ergonomic Lightweight ROLLSROLLER LONG REACH CUTTER COMES two sizes 60 cm (2ft.) and 90 cm (3ft.) Ergonomic to use reach over the worktable without leaning over the table, which normally can cause strain to your back and shoulders. Equipped with practical magnets on the handle. Easy to attach to the ROLLSROLLER steel-frame. Cutting blades in Titan can be rotated up to 4 times. The titan blade cuts through many materials: banners, textile, vinyl and paper. MODEL DIMENSION Long reach cutter 60 600 mm / 1ft. 11in. 10388 Long reach cutter 90 900 mm / 2ft. 11in. 10389 Spare titan blades 10 pcs 10402 HEADQUATERS: info@

CONTACT CLEANER HAND ROLLER Ergonomic design Can be used to clean any flat surface Includes automatic cleaning station Extendable shaft as option A HAND-HELD ACCESSORY that cleans any flat surface. The contact cleaner hand roller is an ergonomic designed hand tool that picks up particles down to 1 micron (and below). The contact cleaner can be used to clean any flat surface and will pick up dry, unattached particles without damaging the surface or leaving anything behind. It will pick up dust, lint, hair, glass, metal skin and plastic particles. After rolling the part you want to clean, simply place the roller into the automatic cleaning station to refresh for next application. Contact cleaner hand roller (part no 71029) includes Hand held roller (300mm/1ft.), Cleaning station and one cleaning adhesive roll with 60 sheets of cleaning paper. A great option is the extendable shaft that makes it more convenient and more ergonomic to reach across a large panel (part no 10443). MODEL DIMENSION POWER Contact cleaner hand roller Width: 300mm / 1ft. 12 vdc 120/240 volt 71029 Cleaning adhesive 4 rolls Width: 300mm / 1ft. 10347 Cleaning adhesive 1 roll Width: 300mm / 1ft. 10346 Extendable shaft + adapter Extendable shaft 1000mm - 1600mm (3ft. 3in. - 5ft 3in.) Straight adapter for roller 300mm (1ft.) 10443 Extendable shaft + adapter HEADQUATERS: info@

SPARE PARTS CONTACT CLEANER HAND ROLLER 3rd generation CONTACT CLEANER HAND ROLLER 30 mm / 12in. 71029 3rd generation REPLACEMENT ROLLER PL54303SP 10408 3rd generation CLEANING ADHESIVE 1 ROLL 1 roll x 60 sheets Arepa0307 71411 3rd generation CLEANING ADHESIVE 4 ROLLS 4 rolls x 60 sheets 71410 3 GENERATIONS CONSUMABLES, ACCESSORIES AND SPARE PARTS THIS IS A GUIDE to help you find the correct consumables, accessories and spare parts for your Contact Cleaner Hand Roller. A HAND-HELD ACCESSORY that cleans any flat surface. The contact cleaner hand roller is an ergonomic designed hand tool that picks up particles down to 1 micron (and below). The contact cleaner can be used to clean any flat surface and will pick up dry, unattached particles without damaging the surface or leaving anything behind. It will pick up dust, lint, hair, glass, metal skin and plastic particles. After rolling the part you want to clean, simply place the roller into the automatic cleaning station to refresh for next application. 2nd generation CONTACT CLEANER HAND ROLLER Nanoclean 30 mm / 12in. - 2nd generation REPLACEMENT ROLLER Nanoclean PL52989SP 10409 2nd generation CLEANING ADHESIVE 1 ROLL 1 roll x 60 sheets Arefa0307 10346 2nd generation CLEANING ADHESIVE 4 ROLLS 4 rolls x 60 sheets 10347 Arefa0307 1st generation CONTACT CLEANER HAND ROLLER 30 mm / 12in. - 1st generation REPLACEMENT ROLLER SA 3362S 10415 1st generation CLEANING ADHESIVE 1 ROLL 1 roll x 60 sheets Fastpadroll 12b 71063 1st generation CLEANING ADHESIVE 4 ROLLS 4 rolls x 60 sheets 71062 Fastpadroll 12b CONTACT CLEANER + EXTENDABLE SHAFT Contact cleaner 300mm (1ft.), including straight adapter. Extendable shaft 1000mm - 1600mm (3ft. 3in. - 5ft. 3in.) 10444 (set) EXTENDABLE SHAFT + ADAPTER Extendable shaft 1000mm - 1600mm (3ft. 3in. - 5ft 3in.) Straight adapter for roller 300mm (1ft.) 10443 (set) Straight adapter 10429 Extendable shaft 10421 HEADQUATERS: info@

ROLLSROLLER ANTISTATIC SYSTEM Active ioniser - neutralizes static electricity in the work area Follows the glide beam and covers the entire flatbed Prevents dust in the work area Retro fit any model Three models ANTISTATIC SYSTEM is a device that neutralizes static electricity from the substrate and the material being applied. Antistatic system is an active device that removes static electricity from the actual work area it is mounted onto the glide beam to follow the glide beam and its pressure roller over the flatbed. Choose between three modes of emits for efficient elimination of static electricity: a combination of + and - charged ions, + or - charged ions. Prevents material sticking together Reduces the risk of electric shocks Three emit modes Nozzles are replaceable 60 degree spray angle MODELS WIDTH Antistatic system 130 1 300 mm / 4ft. 3in 10423 Antistatic system 160 1 600 mm/ 5ft. 3in. 10424 Antistatic system 190 1 900 mm/ 6ft. 3in. 10425 Technical information: Needs to be installed by certified technician Power supply 24 Volt ; 0,35-0,75 Amp HEADQUATERS: info@

ROLLSROLLER HEAT ROLLER Heat assisted roller (30-50 C) Reduce silvering New technology for even heat across the roller s lateral surface Heat assisted laminator and flatbed applicator combined WE INVENTED THE FLATBED APPLICATOR, now we take the technology a step further and introduces Heat roller. A new product developed to take heat assisted lamination to a whole new level. Heat roller combines the advantages of flatbed application and our new (patent pending) technology for a thermal roll with controlled consistent temperature around the roll mantle. The heated roller reduces the appearance of micro bubbles (silvering) upon application of laminate which means faster delivery to the customer without lead times. The roller temperature can easily be adjusted as needed; there are three preset power settings (30-50 C). The working temperature is shown on a display on the glide beam. - ROLLSROLLER WILL, WITH OUR NEW ACCESSORIES HEAT ROLLER, BECOME AN EVEN MORE VERSATILE TOOL. Reduce silvering Controlled heat across the roller s lateral surface Three heat modes 30, 40, 50 C ( higher temperature on request) Heat assisted laminator and flatbed applicator combined 20 C to 50 C <15 min. Power supply 7.5A (120V - 230V ) 800w consumption HEADQUATERS: info@

EXTRA GLIDE BEAM An extra Glide beam creates a second workstation. Double productivity on the same floor space. Recommended for models 4m (13ft.) and longer. Second Glide beam can be upgraded with more or new accessories like Heat roller, Antistatic system or Cleaning system. MODEL NAME ROLLSROLLER 280/145B 10022 ROLLSROLLER 340/145B 10022 ROLLSROLLER 340/170B 10395 ROLLSROLLER 400/145B 10022 ROLLSROLLER 400/170B 10395 ROLLSROLLER 400/150P 10064 ROLLSROLLER 400/170P 10065 ROLLSROLLER 540/170P 10065 ROLLSROLLER 540/220P 10066 ROLLSROLLER 605/170P 10065 ROLLSROLLER 1080/170P 10065 ROLLSROLLER 400/145T 10022 ROLLSROLLER 600/145T 10022 Technical information: Demands extra air connection. 7 bar/116 psi. ROLLSROLLER Long life XL compressor can support two Glide beams. HEADQUATERS: info@

ROLL-X LIFTER Ergonomic lifter No more heavy lifting MODEL NAME Model type Lifting speed ROLL-X LIFTER Lifter 70 mm / 0ft. 11in. per crank revolution (16 revolutions for one complete elevation) Rated load 120 kg / 264 lb at 300 mm / 0ft. 11in on weight centre of gravity 150kg / 330 lb at 210 mm / 0ft. 8in. on weight centre of gravity Hub height 1100 mm / 3ft. 7in. Main wheels Diameter 200 mm / 0ft. 7in.with ball bearing Front wheels Double castor wheels diameter 50 mm / 0ft. 1in. with cone ball bearing Back wheels Double castor wheels diameter 50 mm / 0ft. 1in. with cone ball bearing Own weight 25 kg / 55 lb Chassis, forks, grips, small parts Steel, galvanized and chromated Cover Blue powder-coated Part no. 71084 HEADQUATERS: info@

AIR BLOW GUN Blows away cut chips and dirt from the substrate. Simple installation can be retrofitted. Connects to the Glide beam s air system. No need of an extra compressor. AIR BLOW GUN Can be conected to the beam. Facilitates cleaning. Easily takes blows cuttings of metal from the surface. MODELS Air blow gun 70962 HEADQUATERS: info@

ROLLSROLLER HEIGHT ADJUSTABLE TABLE Make your workstation more ergonomic THIS FACTORY-FITTED ACCESSORY allows you to adjust the height of the work surface for optimal ergonomic comfort. Powered by an electric motor. The height is easily adjusted with buttons on the table sides. AVALIABLE ON PREMIUM MODELS MODEL DIMENSION ROLLSROLLER 400/150P height 750-1 150 mm / 2ft. 3in- 3ft. 7in 10372 ROLLSROLLER 400/170P height 750-1 150 mm / 2ft. 3in- 3ft. 7in 10375 ROLLSROLLER 540/170P height 750-1 150 mm / 2ft. 3in- 3ft. 7in 10360 ROLLSROLLER 540/220P height 750-1 150 mm / 2ft. 3in- 3ft. 7in 10304 ROLLSROLLER 605/170P height 750-1 150 mm / 2ft. 3in- 3ft. 7in 10383 HEADQUATERS: info@

ROLLSROLLER LONG LIFE COMPRESSOR High quality 10-13 years lifetime*** Virtually maintenance free, change filters 1 time per year Self-draining Warranty 3 years Low noise level (57dB) Choose Long life XL compressor if ROLLSROLLER is equipped with one or more of the following accessories: Extended roller adjustment with a total adjustment (stroke of the piston) of >110mm (4 1/3in.) Extra glide beam TECHNICAL INFORMATION ROLLSROLLER LONG LIFE COMPRESSOR 120V ROLLSROLLER LONG LIFE COMPRESSOR 230V Power Supply * 120V/60Hz * 230V/50 Hz * Engine 0,5 HP 0,5 HP Tank size 3,5 l / 0,925 gal. 3,5 l / 0,925 gal. Max pressure 7 bar / 116 psi 7 bar / 116 psi Air aspired/min / ft 3 /min. 36 l/min / 1,27 ft 3 /min. 36 l/min / 1,27 ft 3 /min. Weight 19 kg / 41 lb. 19 kg / 41 lb. Noise level 57dB(A)/1m 57 db(a)/1m Dimensions (L x W x H) 300 x 370 x 340 mm / 12in. x 3ft. 1in. x 2ft. 10in. 300 x 370 x 340 mm / 12in. x 3ft. 1in. x 2ft. 10in. Warranty 3 years 3 years Part no. 10037 10282 Replacement filters (inlet & outlet) Part no. ** 10403 10403 Outlet filter Inlet filter Technical information: * Dual voltage, read owners manual ** Secure the compressor s life by annually replacing its filters. By doing so you will guarantee a lifetime of approximately 10,000 hours. *** Service shall be made yearly. Calculated runtime 5h/day. CE and UL certified HEADQUATERS: info@

ROLLSROLLER COMPRESSOR ALL GENERATIONS Generation 5 Generation 4 Generation 3 Generation 2 Generation 2 Generation 1 ROLLSROLLER LONGLIFE COMPRESSOR 120V/60Hz 71221 230V/50Hz 71220 Replacement filter** 10403 ROLLSROLLER COMPRESSOR Oil free Airflex 120V/60hz * Airflex 230V/50hz * COMPRESSOR Flairmo S33,4 120V/60hz * Flairmo S33,4 230V/50hz * Replacement filter** 10417 COMPRESSOR Jun-air 4-4 230V/50Hz * Replacement filter** 10416 COMPRESSOR Jun-air 6-4 120V/60Hz * Replacement filter** 10416 COMPRESSOR Fini * *Replaced with ROLLROLLER Long life compressor. ** We recommened to replace the filters once a year HEADQUATERS: info@

STOP STATIC Removes static electricity from the chassis. Passive anti static solution 1m cord + magnet FIX THE MAGNET of the inside of the linear glide system as shown on the pictures. MODEL DIEMENSION Stop static Length 1000 mm / 3ft. 3in. 10099 HEADQUATERS: info@

ROLL CRADLE Set of two Designed for ROLLSROLLER Premium Support for rolls of banner and flex-face media THE ROLL CRADLE is designed to fit ROLLSROLLER Premium side trays. Use the Roll cradle for easy wind and rewind of oversized banner and flex-face media. MODELS DIEMENSION Roll Cradle 400 mm / 16 in. 10098 HEADQUATERS: info@

GUIDE SIGN JIG Gives support for bent metal plates and extruded panels like guide sign panels. Mainly for road sign production The jig s profiles are individual adjustable Several jigs can be docked together to create the width of support needed for your panels. GUIDE SIGN JIG is an flexible accessory that is used on a ROLLSROLLER with flatbed worktable (does not fit model Traffic). The Jig stays directly on the bed and creates a support when applying to bent metal plates and extruded panels like guide signs. Built up by adjustable aluminium profiles and can be orderd in any lenght up to 6 000 mm / 19ft. 8in. Several jigs can be docked together to create the width of support needed for your panels. 40mm / 1,5in. 40 L 400 18-100 18-100mm / 0,7in. - 0,3in. 400mm / 1ft. 3in. MODEL DIMENSION Guide sign jig 200/40 Length: 2 000 mm / 6ft. 6in. Width: 400 mm / 1ft. 3in. 10131 Guide sign jig 400/40 Length: 4 000 mm / 13ft. 2in. Width: 400 mm / 1ft. 3in. 10405 Custom size Made to order with maximum length: 6 000 mm / 19ft. 8in IF YOU ARE PRODUCING HIGH VOLUMES OF GUIDE SIGNS PLEASE ALSO LOOK AT THE MODEL ROLLSROLLER TRAFFIC. HEADQUATERS: info@

ROLLSROLLER RULER Easy to use PERFECT TOOL for cutting film and print materials. Stable, robust and reliable ROLLSROLLER RULER LENGTH Ruler 300 cm 3 000 mm / 9ft. 10in. 70981 Ruler 250 cm 2 500 mm/ 8ft. 2in. Ruler 200 cm 2 000 mm/ 6ft. 7in. Ruler 150 cm 1 500 mm/ 4ft. 11in. 71400 Ruler 100 cm 1 000 mm/ 3ft. 3in. HEADQUATERS: info@

CONTACT CLEANING SYSTEM Cleans the surface from dust & particles Can be retrofitted on all Premium model A PERMANENTYL FIXED ACCESSORY that cleans any flat surface. The contact cleaning system is a machine mounted device that picks up particles down to 1 micron (and below). The contact cleaning system can be used to clean any flat surface and will pick up dry, unattached particles without damaging the surface or leaving anything behind. It will pick up dust, lint, hair, glass, metal skin and plastic particles. It has a built in cleaning function that continuously refreshes the roller for next application. Can be mounted to all ROLLSROLLER Premium 170 models, with a width of 1700mm. Contact cleaning system includes one cleaning adhesive roll with 60 sheets of cleaning paper (part no 10404). MODEL DIMENSION Contact cleaning system 1 500 mm / 59 in. 70863 1 box of 4 adhesive rolls 1 500mm / 59 in. 71132 1 roll/60 sheets of cleaning paper 1 500mm / 59 in. 10404 HEADQUATERS: info@

ADDITIONAL ROLL HOLDER SHORT SIDE Standard equipment at one of the short sides. Improve with an extra media roll holder MEDIAHOLDER IS used for holding a roll of print or other roll-media. The roll holder is standard equipment to the ROLLSROLLER and it s attached to one of the short sides. An extra roll holder can be mounted to the opposite side. HEADQUATERS: info@

CUSTUMIZED JIG For traffic sign manufacturing Customized for your sign standards Made to order THE JIG has a start and stop space next to the sign to create a support for the pressurized roller. The Jig is oversized to create a support for the pressurized roller when moving on and of the sign face. HEADQUATERS: info@