LOW VOLTAGE DIRECTIVE 2006/95/EC SAFEGUARD NOTIFICATION UNDER ARTICLE 9 1 INFORMAL EXCHANGE OF INFORMATION * 1. Name of the tifying a. Member State / other SPAIN b. Full name and address, telephone and fax numbers, e-mail of the department and of the competent official supplying the information c. Notification ES-2013-37 LVD d. Date 23/12/2013 MINISTERIO DE INDUSTRIA, ENERGIA Y TURISMO Dirección General de Industria Subdirección General de Calidad y Seguridad Industrial Paseo de la Castellana 160 28071 Madrid Tf: 91 349 4149 Fax: 91 349 43 00 Sr José Rodríguez Herrerías e-mail: jerodriguez@minetur.es 2. Identification of the equipment a. Product category 2 Kitchen appliances b. Custom code Unkwn c. Product name and description en: Refrigerator sp: FRIGORÍFICO-CONGELADOR d. Brand name DOMEST e. Type KON 72A+ f. Electrical specifications (voltage, wattage, class of protection against electric shock, IP classification) 230V; 50hZ;0,65A;95W g. Bar Code h. Price in EUR (selling) 379,00 i. Name and address of the manufacturer Unkwn j. Name and address of the responsible for Conforama placing of the European market Avda Europa s/n, Parque Oseste Alcorcon, 28922 Madrid (España) k. Internet sales points Unkwn l. Made in / Country of origin Unkwn m. Exporter Unkwn n. Name and address of the first entry point into the national market, (if possible) o. Other countries in which the equipment is placed on the market BEMY TRADING S.L.U. Dalmases, 77, 08022 Barcelona (España) Unkwn 1 Please check the appropriate box [see 3a] 2 Please check the relation in the document ELECTRICAL SAFETY categories and sub-categories 1/5
3. Proof of conformity a. CE marking yes b. Other directive(s) covered by CE marking yes which one(s)?: EMC c. Other markings / Certificate Marking GS; IMQ; VDE; ÖVE; UL; ULc KEMA; KEMA-KEUR; CEBEC; ITS; ETL; ETS S; FI; N; D; SLG; TÜV Product Service; TÜV Rheinland UR; d. Declaration of conformity issued by a manufacturer or authorised representative following the application of harmonised standards other available to the market surveillance t t available to the market surveillance t requested e. Technical documentation available to the market surveillance t t available to the market surveillance t requested f. Declaration of conformity issued by a manufacturer or authorised representative on the basis of a report drawn up by a tified body available to the market surveillance t t available to the market surveillance t requested Name of tified body: Reference of certificate: Reference of technical report: 2/5
4. Details of the measures taken a. Type of measure: Removal from circulation Manufacturer Importer into the EEA Retailer, Prohibition of the placing of the equipment on the market General measures making the placing of the equipment on the market subject to specific conditions Other (please describe) b. References to measures: Date: 20/12/2013 Reference: 201207590235 Method of tification: Carta/Letter c. Brief summary: Se envió una carta al importador comunicando los incumplimientos existentes en el equipo. A letter with the n-conformity was sent to the importer d. Has the manufacturer, authorised representative or importer been informed? yes Method of tification: Carta/Letter Date: 20/12/2013 e. Has the Authority in the country of the manufacturer been informed? yes Method of tification: Date: f. Is the measure firm, or can it be the subject of an appeal? firm the possibility for an appeal exists subject of an appeal (Please describe) 5. Reasons for the measures taken a. Non-conformity with Article 2 of the low Voltage Directive resulting from a shortcoming in the applicable standard(s) b. Non-conformity with Article 2 of the Low Voltage Directive resulting from a faulty application of the applicable standard(s) c. Where standard applied, n compliance with the rules of good engineering practice as referred to in Article 2 of the Low Voltage Directive Standard(s) reference: Standard(s) reference: EN 60335-1:2002+A1:2004+A11:2004+A12:2006 +A2:2006 +A13:2008 EN 60335-2-24:2003+A11:2004+A1:2005+A2:2007 +A12:2009 3/5
6. Brief description of faults, nature of hazards and/or shortcomings in standards observed 3 MARKING AND INSTRUCTIONS. Some instructions and markings necessary for a safe use and installation of the appliance are missing. PROTECTION AGAINST ACCESS TO LIVE PARTS. The appliance is t constructed and enclosed to avoid accidental contact with live parts or parts protected only by basic insulation. Removable parts in the appliance allow the access to parts with Basic insulation only, with risk of electric shock in case of insulation failure. CONSTRUCTION. Some parts of the appliance are t adequately fixed to avoid access to live parts under the stress conditions during rmal use MARCAS E INDICACIONES Las instrucciones del aparato carecen de las indicaciones necesarias para una instalación correcta y un uso seguro. NO CUMPLE EN 60335-2-24, Apdo 7.12.1. PROTECCIÓN CONTRA EL ACCESO A LAS PARTES ACTIVAS El aparato está construido y encerrado de forma que exista una protección suficiente contra los contactos accidentales con partes activas. Pues una vez retiradas las partes amovibles, se accede a partes protegidas por un solo aislamiento y a partes cuyas líneas de fuga y distancias en el aire con partes activas son inferiores a las requeridas en el capítulo 29 (Ver 22.11). NO CUMPLE EN 60335-1, Apdos 8.1 y 8.1.2 CONSTRUCCIÓN Las partes amovibles del compresor que proporcionan el grado necesario de protección contra el acceso a partes activas están fijadas de forma segura y resisten las solicitaciones mecánicas que pueden ocurrir durante el uso rmal. NO CUMPLE EN 60335-1, Apdo 22.11 7. Additional information Circa Server Paper annexed copy of test reports photographs copy of declaration of conformity distribution chain others 3 Describe, where appropriate, the variance to the relevant standards 4/5
Date: 31/12/2013 signature 5/5