LRS-STOR SRIS Indirect Water Heaters
LRS-STOR SRIS Indirect Water Heaters Laars Heating Systems offers high volume single-wall and double-wall indirect water heaters. ll model types feature a super-efficient heat exchanger a carbon steel, glass-lined coil for the Laars-Stor Single Wall and a stainless steel coil for the Laars-Stor SS. The Laars-Stor2 was recently introduced to the series and features a new double-wall heat exchanger. The new design is super-efficient and is the perfect mate for your boiler, heat pump or solar heating system. Laars Heating Systems single-wall and double-wall indirect models are dependable and durable water heaters that supply an unprecedented volume of hot water. They are built to last, problem-free, efficient and offer high deliverability for years. That s why all residential Laars-Stor and Laars-Stor2 Series indirect water heaters offer a Limited Lifetime Tank and Heat xchanger Warranty. When homes already have an existing boiler system, Laars single-wall and doublewall indirect water heaters are the perfect complement.
IMPORTNT RSONS TO ONSIR LRS-STOR SRIS INIRT WTR HTR SV MONY N NRY Indirect water heaters use the home s boiler or furnace as the heat source. They are usually the least expensive way to provide hot water. HIH PRORMN Laars-Stor models feature a super efficient heat exchanger made of a glass-lined carbon steel tubing giving an exceptional first hour delivery and high volumes of hot water. LOW PRSSUR ROP Laars-Stor Series indirect water heaters were designed to minimize pressure drop so that customers get the hot water they want at the pressure they have come to expect. IINY Since hot water is stored in the water heaters insulated storage tank, the boiler or furnace does not have to turn on and off as frequently, improving its fuel economy. INSTLLTION S These water heaters require no fuel or venting materials. They connect directly to an existing boiler. LIMIT LITIM WRRNTY Laars-Stor models were designed and built for problem free and reliable service. We offer this warranty because of our confidence in the dependability and durability of the product.
LRS-STOR RSINTIL NRY SVR SINL-WLL INIRT WTR HTR The ingenious Laars-Stor single wall was engineered to provide the lowest pressure drop, the highest hot water output and the highest amount of effective actual heat transfer area of any indirect fired water heater in the industry. Heat xchangersingle wall 1 1 2" glass coated steel. actory Installed Sediment Reduction Systemold water inlet sediment reducing device. Helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up at top of tank. Three Protective node Rods Provides added protection against corrosion for long trouble-free service. lass Lined TankLaars Heating Systems water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. ully utomatic ontrolsimmersed Honeywell aquastat. actory Installed Nipplesor longer water heater life, easier installation. 2" Non- oam Insulation overs the sides and top of tank to save energy by retarding loss of heat. Supply and Return onnections The 1" NPT female connections are located on the front for both the boiler supply and boiler return. Stand-by Heat LossLess than 1 2 per hour. rass rain Valve. T&P Relief Valve Includedll models feature opening on side of tank. Limited Lifetime Warranty on Steel Tank and Heat xchangerheavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining. Six Year Limited Warranty on Parts. NO ROS (TYPIL) POTL ONNTIONS (TYPIL) Residential Laars-Stor apacity Shipping Weight LS-SW-2--L LS-SW-2-40-L LS-SW-2-50-L LS-SW-2-65-L LS-SW-2-80-L LS-SW-2-120-L Imp. 25 32 40 50 62 97 48 75 116 Liters 1 3 182 7 284 439 Jacket iameter 24 28 1 /4 61 72 Height loor to Heater Top 33 5 /8 41 1 /8 46 1 /4 59 1 /4 59 62 1 /2 85 104 112 150 150 159 Height loor to T&P onn. 28 1 /4 34 3 /8 40 1 /8 53 1 /8 52 7 /8 55 3 /4 72 87 102 135 135 2 Height loor to Water onn. 34 3 /8 41 7 /8 47 59 3 /4 63 1 /4 87 106 119 161 Height loor to xchanger Outlet 6 3 /8 16 Height loor to Height loor xchanger Inlet to quastat 28 1 /2 72 pprox. lbs. 0 172 180 196 4 355 kg. 64 77 82 89 102 161 Meets or exceeds the insulating standards established under SHR Standard 90.1b (current edition). eneral: ll units are certified at 0 PSI (2068 kpa) test pressure and 150 PSI working pressure (1034 kpa). ll potable water connections are 3 4" (19mm) NPT on 8" (203mm) centers. imensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. LS-SW-2--L LS-SW-2-40-L LS-SW-2-50-L LS-SW-2-65-L LS-SW-2-80-L LS-SW-2-120-L 1st Hr. US als. Rating @ 0 279 288 7 6 321 357 1st Hr. Liters Rating @ 10 1090 1124 1158 1215 1351 1st Hr. US als. Rating @ 115 4 4 447 4 4 507 1st Hr. Liters Rating @ 46 1624 1658 1692 1726 1779 1919 Note: ll ratings are based on 200 boiler water temperature, 50 potable water inlet temperature and an approximate boiler output of 0,000 TU/H
LRS-STOR OMMRIL NRY SVR SINL-WLL INIRT WTR HTR Laars-Stor single wall commercial models incorporate a super-efficient heat exchanger. Made of 1.5" diameter carbon steel tubing and coated with a glass-lining, it has a total heat surface area of 27.2 square feet. The result is an exceptional first hour delivery and vast hot water reserves. Heat xchangersingle wall 1 1 2" glass coated steel. actory Installed Sediment Reduction Systemold water inlet sediment reducing device. Helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up at top of tank. Three Protective node Rods Provides added protection against corrosion for long trouble-free service. lass Lined TankLaars Heating Systems water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. ully utomatic ontrolsimmersed Honeywell aquastat. actory Installed Nipplesor longer water heater life, easier installation. 2" Non- foam insulation overs the sides and top of tank to save energy by retarding loss of heat. Supply and Return onnections The 1" NPT female connections are located on the front for both the boiler supply and boiler return. Stand-by Heat LossLess than 1 2 per hour. rass rain Valve. T&P Relief Valve Installedll models feature opening on side of tank. ive Year Limited Warranty on Steel Tank and Heat xchangerheavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining. One Year Limited Warranty on Parts. POTL ONNTIONS (TYPIL) NO ROS (TYPIL) ommercial Laars-Stor apacity H Shipping Weight LS-SW-65-5 LS-SW-80-5 LS-SW-120-5 Imp. 48 61 95 58 73 1 Liters 0 276 431 Jacket iameter 24 28 1 /4 61 72 Height loor to Heater Top 59 1 /4 59 62 1 /2 150 150 159 Height loor to T&P onn. 53 1 /8 135 52 7 /8 134 55 3 /4 2 Height loor to Water onn. 59 161 Height loor to xchanger Outlet 6 3 /8 16 Height loor to Height loor xchanger Inlet to quastat 47 3 /4 47 3 /4 48 3 /4 121 121 124 pprox. lbs. 265 3 415 kg. 120 133 188 Meets or exceeds the insulating standards established under SHR Standard 90.1b (current edition). eneral: ll units are certified at 0 PSI (2068 kpa) test pressure and 150 PSI working pressure (1034 kpa). ll potable water connections are 3 4" (19mm) NPT on 8" (203mm) centers. imensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. LS-SW-65-5 LS-SW-80-5 LS-SW-120-5 1st Hr. US als. Rating @ 0 534 546 583 1st Hr. Liters Rating @ 2021 2067 07 1st Hr. US als. Rating @ 115 820 834 871 1st Hr. Liters Rating @ 46 3104 3157 37 Note: ll ratings are based on 200 boiler water temperature, 50 potable water inlet temperature and an approximate boiler output of 420,000 TU/H
LRS-STOR2 RSINTIL NRY SVR OUL-WLL INIRT WTR HTR The Laars-Stor2 features a patented double-wall carbon steel heat exchanger coil coated with a glass-lining for corrosion resistance and long life. The Laars-Stor2 supplies a first hour rating of 120 to 158 gallons per hour. Heat xchangerouble wall 1 1 2" O.. glass coated steel coil. ecause the double wall coil has a positive leak path, the hydronic fluid will stay separate from the potable water. Low Heat xchanger Head LossUp to 10 PM flow, with less than 5 ft. of head loss. reatly reduces the required pump size for heat exchange. actory Installed Sediment Reduction Systemold water inlet sediment reducing device. Helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up at top of tank. lass Lined TankLaars Heating Systems water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. ully utomatic ontrols ast acting surface mount thermostat for automatic temperature control. POTL WTR ITTINS - 3/4" NPT NOS Water onnections 3 4" NPT factory installed true dielectric fittings. xtends water heater life and eases installation. 2" Non- oam Insulationovers the sides and top of tank to save energy by retarding loss of heat. lso increases jacket rigidity. Two Protective luminum RodsProvides added protection against corrosion for long trouble-free service. Supply and Return onnectionsthe 3 4" NPT female connections are located on the front for both the boiler supply and boiler return. Stand-by Heat LossLess than 1 2 per hour (SHR 90.1b current standard). OL WTR INLT HOT WTR INLT TMPRTUR N PRSSUR RLI VLV ROM OILR SUPPLY 3/4" NPT SUR MOUNT THRMOSTT TO OILR RTURN 3/4" NPT rass rain Valve. T&P Relief Valve Included ll models feature opening on side of tank. Steel TankHeavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining. I--R ertified. Residential Laars-Stor2 RIN OUPLIN - 3/4" NPT apacity Shipping Weight LS-W-2-40-L LS-W-2-50-L LS-W-2-65-L LS-W-2-80-L Imp. 32 40 54 63 48 64 75 Liters 4 182 242 284 loor to Heater Top 41 104 46 1 /4 117 59 150 59 150 Jacket iameter 24 61 loor to T&P onn. 34 3 /8 40 1 /8 53 1 /8 52 7 /8 87 102 135 134 loor to Water onn. 41 7 /8 47 1 /4 59 3 /4 108 120 153 loor to oiler Outlet loor to oiler Inlet loor to Thermostat pprox. lbs. 1 180 196 4 kg. 76 89 89 102 I--R LS-W-2-40-L LS-W-2-50-L LS-W-2-65-L LS-W-2-80-L irst Hour Rating @ 135 (al/hr.) 123 133 8 158 Water Heater Ratings ontinuous raw Rating @ 135 (al/hr.) 98 98 98 98 Standby Heat Loss Rating ( /Hr.) 1.1 0.7 0.6 Minimum Heat Req. Rate (TU/Hr.) 65,000 65,000 65,000 65,000 Minimum Heat Source low Rate (al/min.) 8.0 8.0 8.0 8.0 Notes: These certified ratings were obtained with a heat Notes: ased on 200 boiler water temperature and source output rate and flow rate as specified and a 180 50 potable water inlet temperature. boiler water supply temperature. Other results will be obtained under different conditions. Meets or exceeds the insulating standards established under SHR Standard 90.1b (current edition). O LS-W-2-40-L LS-W-2-50-L LS-W-2-65-L LS-W-2-80-L Maximum irst Hour Rating (al/hr.) @ 0 115 80 87 96 106 Water Heater Performance Meets N Requirements eneral: ll units are certified at 0 PSI test pressure (2068 kpa) and 150 PSI working pressure (1034 kpa). ll potable water and heat exchanger connections are 3 4" NPT (19mm) on 8" (203mm) centers. imensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. Suitable for Water (Potable) Heating and Space Heating Toxic chemicals, such as those used for boiler treatment, shall NVR be introduced into the potable water side. The potable side of this unit may NVR be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance. The heat exchanger side of the unit may be used in space heating applications. 1 1 1 8 ontinuous raw Rating (al/min.) @ 0 115 1.6 1.6 1.6 1.6 pproximate oiler Output Needed or Ratings (TU/Hr.) 55,000 55,000 55,000 55,000 PM 2 t. of Hd. Loss trace Heat xchanger Head Loss 5 0.4 8 2.3 10 4.6 12 6.9
LRS-STOR SS NRY SVR STINLSS STL INIRT WTR HTR The Laars-Stor SS utilizes a superior grade of stainless steel for the tank and the heat transfer coil. This construction is lightweight and also resists pitting while minimizing inter-granular and stress corrosion. The Laars-Stor SS models provide superior thermal conductivity for higher efficiency. Laars-Stor SS Stainless Steel Tank and Heat xchangermade from chromium molybdenum - titanium ferritic 444 stainless steel alloy. Supply and Return onnections The 3 4" NPT female connections are located on the front for both the boiler supply and boiler return (1 NPT on LS-RTV-119). ree Polystyrene Insulation orm fitted and molded, this system contributes to greater heat retention, improved overall efficiency and reduced standby heat loss. Jacketorrosion and dent resistant plastic casing. Stand-by Heat LossLess than 1 2 per hour. rass rain/return Valve. T&P Relief Valve Opening ll models have special tapping on top of tank. WarrantyResidential models have a limited lifetime warranty on the tank and heat exchanger. The LS- RTV-119 is a commercial model and is furnished with a 5 year warranty on the tank and heat exchanger. or more details please refer to the complete copy of the warranty included with the heater. Six Year Limited Warranty on Parts. Hot Water Outlet T&P Valve Opening apacity Return Supply Shipping Weight LS-RTV-40-L LS-RTV-52-L LS-RTV-75-L LS-RTV-75-L LS-RTV-119-L Imp. 39.6 51.3 74.5 74.5 118.9 Height 47 3 /4 65 1 /2 65 1 /2 62 96 121 166 166 157 iameter 79 old Supply 7 1 /4 7 1 /4 7 1 /4 7 1 /4 10 1 /4 18 18 18 18 26 oiler Return 16 3 /4 42 oiler Supply 27 1 /4 27 3 /4 28 44 3 /8 69 71 113 Height to Hot Water Outlet 1 /2 48 1 /4 66 66 62 1 /2 10 123 168 168 159 in. cm. 96 in. 54 cm. 137 pprox. lbs. 83 93 117 1 315 kg. 42 53 59 2 apacity Performance @180 Supply @200 Supply LS-RTV-40-L LS-RTV-52-L LS-RTV-75-L LS-RTV-75-L LS-RTV-119-L 1.17 1. 1. 2.34 4. Liters 4.43 5.91 5.91 8.86 17.4 Heat Surface rea (ft 2 ) 7.64 10.01 10.01 15.28 21.31 oiler low PM 11 11 11 15 ross oiler Output TU/Hr 136,000 173,000 190,000 265,000 252,000 Pressure rop (t. W..) 5.3 8.7 8.7 10.6 3.1 irst Hour @ 0 151 192 216 5 8 PH Rec. @ 90 Rise 111 1 136 215 178 irst Hour @ 0 182 231 253 355 337 PH Rec. @ 90 Rise 1 180 173 275 217 Notes: 1) Inlet water temperature based on 50. 2) LS-RTV-75-L has 2 coils. 3) LS-RTV-119 supplied with 3 extra plugged tappings (see manual). 4) LS-RTV-119 equipped with steel casing. 5) 3 4" supply/return piping is recommended on heat source side. Meets or exceeds the insulating standards established under SHR Standard 90.1b (current edition). eneral: ll units are certified at 0 PSI (2068 kpa) test pressure and 150 PSI working pressure (1034 kpa). ll potable water connections are 3 4" (19mm) NPT (1 1 4" (32mm) NPT on LS-RTV-119). imensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Litho in. 800276 ax 800.559.1583 (ustomer Service, Service dvisors) 20 Industrial Way, Rochester, NH 067 3.335.60 ax 3.335.3355 (pplications ngineering) 1869 Sismet Road, Mississauga, Ontario, anada L4W 1W8 905.2.0100 ax 905.366.01 www.laars.com Laars Heating Systems o. 0908 ocument 11027