DECLARATION OF PERFORMANCE No. 0085 EN 1. Unique identification code of the product-type: fischer Highbond-Anchor FHB 2. Intended use/es: Product Bonded anchor for use in concrete Intended use/es Anchorages for which requirements for mechanical resistance and stability and safety in use shall be fulfilled. They are for fixing and/or supporting structural elements (which contribute to the stability of the works) or heavy units, see appendix, especially Annexes B 1 to B 4 3. Manufacturer: fischerwerke GmbH & Co. KG, Klaus-Fischer-Straße 1, 72178 Waldachtal, Germany 4. Authorised representative: -- 5. System/s of AVCP: 1 6a. Harmonised standard: --- Notified body/ies: --- 6b. European Assessment Document: ETAG 001; 2013-04 European Technical Assessment: ETA-06/0171; 2016-04-20 Technical Assessment Body: DIBt Notified body/ies: 1343 MPA Darmstadt 7. Declared performance/s: Mechanical resistance and stability (BWR 1) Essential characteristic Performance Characteristic resistance See appendix, especially Annexes C 1 to C 3 Displacements under tension an shear loads See appendix, especially Annex C 3 Safety in case of fire (BWR 2) Essential characteristic Performance Reaction to fire Anchorages satisfy requirements for Class A 1 Resistance to fire NPD 8. Appropriate Technical Documentation and/or Specific Technical Documentation: --- The performance of the product identified above is in conformity with the set of declared performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole responsibility of the manufacturer identified above. Signed for and on behalf of the manufacturer by: Andreas Bucher, Dipl.-Ing. Wolfgang Hengesbach, Dipl.-Ing., Dipl.-Wirtsch.-Ing. Tumlingen, 2016-04-29 - This DoP has been prepared in different languages. In case there is a dispute on the interpretation the english version shall always prevail. - The Appendix includes voluntary and complementary information in English language exceeding the (language-neutrally specified) legal requirements.
Appendix 1 / 11 Specific Part 1 Technical description of the product The fischer Highbond-anchor FHB is a torque controlled bonded anchor consisting of a mortar cartridge with FIS HB and an anchor rod with hexagon nut and washer. The anchor rod (including nut and washer) is made of galvanised steel. The load transfer is realised by mechanical interlock of several cones in the bonding mortar and then via a combination of bonding and friction forces in the anchorage ground (concrete). The product description is given in Annex A. 2 Specification of the intended use in accordance with the applicable European Assessment Document The performances given in Section 3 are only valid if the anchor is used in compliance with the specifications and conditions given in Annex B. The verifications and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the anchor of at least 50 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works. 3 Performance of the product and references to the methods used for its assessment 3.1 Mechanical resistance and stability (BWR 1) Essential characteristic Performance Characteristic resistance See Annex C 1 to C 3 Displacements under tension and shear loads See Annex C 3 3.2 Safety in case of fire (BWR 2) Essential characteristic Reaction to fire Resistance to fire Performance Anchorages satisfy requirements for Class A1 No performance assessed 3.3 Hygiene, health and the environment (BWR 3) Regarding dangerous substances there may be requirements (e.g. transposed European legislation and national laws, regulations and administrative provisions) applicable to the products falling within the scope of this European Technical Assessment. In order to meet the provisions of Regulation (EU) No 305/2011, these requirements need also to be complied with, when and where they apply. 3.4 Safety in use (BWR 4) The essential characteristics regarding Safety in use are included under the Basic Works Requirement Mechanical resistance and stability. Fraunhofer IRB, ID: Fischerwerke
Appendix 2 / 11 4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base In accordance with guideline for European technical approval ETAG 001, April 2013, used as European Assessment Document (EAD) according to Article 66 Paragraph 3 of Regulation (EU) No 305/2011, the applicable European legal act is: [96/582/EC]. The system to be applied is: 1 Fraunhofer IRB, ID: Fischerwerke
Appendix 3 / 11
Appendix 4 / 11
Appendix 5 / 11
Appendix 6 / 11
Appendix 7 / 11
Appendix 8 / 11
Appendix 9 / 11
Appendix 10 / 11
Appendix 11 / 11