GETINGE 88 TURBO SUPERIOR CLEANING AND DISINFECTION IN HALF THE TIME Always with you
2 Getinge 88 Turbo SHORTENED LEAD TIMES HIGHER THROUGHPUT There is a simple reason why Getinge is the world leader in sterilization and disinfection: we know our customers everyday reality. And when we develop products, our focus is on your needs. Innovative solutions. This approach, highly appreciated by our customers, often leads us into new territory, e.g. when we developed the new Getinge 88 Turbo washer-disinfector. Here, the question How can we further reduce our customers total costs? led us to a unique concept with innovative technology and several new solutions.
Getinge 88 Turbo 3 The whole job in half the time Like all our washer-disinfectors, the Getinge 88 Turbo ensures superior cleaning, disinfection and drying. But this machine does it much faster, without affecting the wash result. For example, in a typical processing cycle the new Getinge 88 Turbo can clean, disinfect and dry 15 DIN trays in just half the time it takes for a conventional machine. The benefits are obvious. Higher throughput. Fewer machines needed. Shorter turnaround times. All these benefits will favorably impact your bottom line!
4 Getinge 88 Turbo THE FASTEST WASHER-DISINFECTOR The Getinge 88 Turbo is unique in terms of its ability to clean, disinfect and dry in shorter periods of time. But it saves more than time it also saves energy and water. Easy-to-use operating panel Superior cleaning and disinfection The absolutely first-rate cleaning and disinfection performance of the Getinge 88 Turbo has been verified in various tests and is well documented. Naturally the product conforms to all relevant norms and standards. Preventive maintenance alarm Excellent load capacity The Getinge 88 Turbo can be equipped with wash carts with up to five levels, loading 15 DIN trays. Easy to operate Our PACS 350 control system is very userfriendly. Program settings can be changed directly on the operator panel and are regulated by an access code. Cleansable spray arms Electrical Cabinet Pull-out makes it easy to access components 4
Getinge 88 Turbo 5 Four patents pending for the new innovative technical solutions Automatic glass doors for visual control-view in processes Complete process verification Obviously, the Getinge 88 Turbo monitors and records all cycle performance data. There are three ports for direct communication, e.g. with a printer, scanner or the T- DOC documentation system. A built-in barcode scanner and printer are available as options. Self-cleaning fine filter Innovative solutions A system featuring a process tank, a booster tank and a drain tank enables extremely short filling and draining times. By continuously preparing for the subsequent phase, the Getinge 88 Turbo eliminates unnecessary waiting times during the processing cycle. Easy service access The pull-out electrical cabinet makes it easy to access components. The self-diagnostics and preventive maintenance alarms also facilitate service and maintenance. 5
6 Getinge 88 Turbo What s the secret? THE MULTI-TASK GETINGE 88 TURBO! The secret is not in what you see, but in the MULTI-TASK performance behind the panels (cover plates). The washing process is the same as in other Getinge washer-disinfectors no added special chemicals, no hocus-pocus. But the Getinge 88 Turbo also features dramatic reductions in filling and draining times, in combination with the new and innovative high-efficiency drying. Here s how simple it all works. Step 1 Pre-rinse The chamber is filled with cold water from the prefilled process tank in 15 seconds via a big quick-opening membrane valve. The speed-controlled circulation pump is soft-started and runs at full speed for superior cleaning results. The water goes via the spray manifold into the two spray arms in the top and bottom and into the spray arms of the wash carts. The chamber is drained in 15 seconds via another big quick-opening membrane valve in the conical bottom. The water is then rapidly drained into a drain tank, from where it is pumped to the building s wastewater system. Step 2 Wash Cold or hot water from the prefilled process tank is dumped into the chamber at the same time as the drain tank is being emptied. The speed-controlled circulation pump is soft-started and runs at full speed for superior cleaning results. Cleaning continues until the wash solution has operated at the set temperature for the programmed time. The chamber is then drained in the same way as in Step 1.
Getinge 88 Turbo 7 Step 3: Rinsing / Final Rinsing / Disinfection For the rinse phases, hot water from the pre-filled process tank is dumped into the chamber at the same time as the drain tank is being emptied. The speed-controlled circulation pump runs at half speed thus reducing the water consumption by up to 20 %. In the disinfection phase, fresh 90 C water from the booster tank (pumped up to the process tank during the previous phase) is dumped into the chamber. The rinse/disinfection temperature and duration can be set to comply with all known norms. The chamber is drained as described before. Step 4: Drying Fresh ambient air is preheated by the exhaust air in the air-to-air heat exchanger before being electrically heated to the drying temperature. The heated air is then transported in stainless steel pipes to the water manifold pipe and then into all spray arms. This concept assures up to 40 % shorter drying times thanks to very turbulent and efficient drying conditions in the entire chamber. The system is also available with an optional drying sensor to abort the drying process when the preset outgoing air humidity has been reached. This means even shorter drying times when operating at part loads.
8 Getinge 88 Turbo Economical and environmental choice The fastest washer-disinfector ever lets you run a cycle in half the time, without harsh chemicals and with minimal media consumption! So you ll need fewer machines, you ll cut your costs and your environmental impact will be less! Reduced water consumption Since the Getinge 88 Turbo runs the circulation pump at rinse phase at half speed, the water consumption is kept to a minimum. now with automatic drying sensor! No harsh chemicals Thanks to Getinge s unique technology, fast, uncompromising cleaning and only thermal disinfection results are achieved entirely without the use of harsh chemicals another important factor in reducing environmental impact! Unique energy-saving drying unit The drying unit features a heat exchanger that enables faster drying while using less power. Drying air is dispersed evenly throughout the load via all of the spray arms and create turbulent effective drying conditions. Automatic drying sensor The optional drying sensor measures the relative humidity at the drying air and determines the time needed for goods to dry and adjust the process accordingly. This can cut the process time even more, while also lowering energy consumption.
Getinge 88 Turbo 9 AS AUTOMATED AS YOU LIKE Studies show that up to 70% of the total cost of a washer-disinfector is accounted for by staff costs. Automatic loading and unloading systems reduces these costs, and consequently also the total cost of washing and disinfection. Automatic loaders/unloaders When the disinfector is ready for loading or unloading, this is done automatically. The wash carts have sensors that start the right wash program for each cart. Automatic loading and unloading is a handy option that reduces handling time and frees the operator to perform other tasks. Getinge AGS (Air Glide System) The principle of the Getinge AGS is no waiting. Wash carts are loaded into the washer-disinfector in the order of their arrival, since the wash carts for all washerdisinfectors queue up at one single point. The system handles all loading, program selection and unloading automatically.
10 Getinge 88 Turbo ACCESSORIES FOR ANY NEED Getinge offers a wide range of loading equipment and accessories so you can customize the Getinge 88 Turbo to fit your exact needs. Whatever kind of goods you wish to process, we have a solution. To the right, you will see a selection of what is available. For the complete range, please refer to our Loading Equipment Catalogue. Loading equipment for getinge 8666/8668 WaSHer-diSinfeCtorS and getinge Cm320 index WaSHer-diSinfeCtor For more information, please refer to the separate Loading Equipment Catalogue. loading handbook for common hospital instrument sets in a washer-disinfector How to use the accessories To help you get started to work with the accessories, we have created the Getinge Loading Handbook, which shows how to work with and load the most commonly used instrument sets efficiently.
Getinge 88 Turbo 11 Wash carts Wash carts are available in a number of different versions: flexible OP carts as well as carts for MIS accessories, containers, AN goods etc. Transport trolleys and storage tables Transport trolleys or height-adjustable trolleys for manual loading/unloading are also available, as well as storage tables and return conveyors. Cart for 1/2 STU containers Capacity: 6 DIN containers with lids (600x300x150 mm) MIS-wash cart OP-cart 4 levels mounted with U-ramp and MIS-ramp AN-wash cart for integrated drying
1942 ENG 2011.09 Göteborgstryckeriet We reserve the right to make technical and construction changes. Getinge Infection Control AB P O Box 69 SE-305 05 Getinge SWEDEN Phone: +46 10 335 00 00 info@getinge.com www.getinge.com