Refrigeration pumps FOR THE RETAIL INDUSTRY UK MANUFACTURED CONDENSATE REMOVAL PUMPS FOR USE WITH REFRIGERATION DISPLAY UNITS HIGHLY ADVANTAGEOUS FROM A HYGIENE ASPECT QUICK AND EASY TO INSTALL EXCEPTIONALLY RELIABLE For further information: T: + () 888 F: + () 8886 sales@aspenpumps.com www.aspenpumps.com Made in Great Britain
A simple yet very effective solution for the removal of water from supermarket retail refrigeration units... The Aspen Retail Refrigeration Pumps allow easy installation directly underneath supermarket refrigeration units, where direct drainage is not available and the water needs to be pumped up above the ceiling and away to a suitable drain. Water is drained directly from the refrigerator during the speed defrost cycle, which is pumped away quickly and quietly, through a filter to catch any debris. Cleaning and maintenance of the pumps is simple, as they can be removed easily from underneath any unit. The units are suitable for both the OEM market and for direct installers. ECONOMY RETAIL REFRIGERATION PUMP () TOP INLET PT. NO. FP8 SIDE INLET PT. NO. FP Ideal for several refrigeration units to drain into Height: mm / Footprint: 59 x 5mm L Tank capacity / 5 L/hr max. flow rate / 5m max. head FLOW IN LITRES/MIN & SRRP TYPICAL PERFORMANCE stainless steel tank and covers Tank capacity: litres MAX Water flow rate: 5 litres per hr MAX Recommended head: 5 metres Thermally protected V motor High level safety switch FILTER to catch debris 5mm inlet hole to lid mm outlet hose connection STANDARD RETAIL REFRIGERATION PUMP (SRRP) TOP INLET PT. NO. FP9 SIDE INLET PT. NO. FP Plastic tank and cover Lightweight Push-in plug Handles to enable easy carrying Water temp: C to C Single float hall effect switch Stainless steel Hard-wired SRRP Water temp: C to 75 C floats & relay
plastic tank and cover making unit lightweight and easy to clean LOW PROFILE TOP INLET PT. NO. FP597 SIDE INLET PT. NO. FP85 push in plug easy carry handles Introducing the NEW Low Profile... (Economy Retail Refrigeration Pump) Standing at a height of only 75mm, it is a simple but very effective solution for the removal of water from directly underneath supermarket refrigeration units during the auto defrost cycle. Ideal for individual refrigeration units with limited space, it is suitable for both the OEM market and for direct installers. LOW PROFILE Tank capacity:.5 litres MAX Water flow rate: 9 litres per hr MAX Recommended head: metres Thermally protected V motor High level safety switch FILTER to catch debris 5mm inlet hole to lid mm outlet hose connection Plastic tank and cover Lightweight Ideal for individual refrigeration units Height: 75mm / Footprint: 5 x mm.5l Tank capacity / 9 L/hr max. flow rate / m max. head Push-in plug Handles to enable easy carrying Water temp: C to C Single float hall effect switch Product Height Width Depth Weight LOW PROFILE SRRP mm 59mm 5mm.9kg 75mm 5mm mm.kg mm 585mm mm 7.8kg FLOW IN LITRES/MIN LOW PROFILE TYPICAL PERFORMANCE MAX RECOMMEND m HEAD
The Macerator pump is unique and comes in two different tank sizes: litre and the litre... The Aspen Macerator pump has an internal filter blade to stop the pump from clogging with food debris between maintenance visits and will discharge the water to a head of 8.5 metres. The internal pre-wired safety float is a low current switch to stop the drain down cycle in the event of pump failure. The pump is operated via two internal float switches. Collect condensation and defrost water from refrigeration cabinets Internal filter blade for food debris L: Plastic tank / L: Stainless steel MACERATOR PERFORMANCE 8 6 6 8 FLOW IN LITRES/HOUR LITRE PT. NO. FP5 LITRE PT. NO. FP7 Product Height Width Depth Weight MACERATOR LITRE MACERATOR LITRE mm 5mm 5mm.8kg mm 5mm mm 6.8kg Tank capacity: litre or litres Self-priming 8.5 metres discharge head max Water flow rate: 78 litres per hr Pump rating:.8a V AC Connecting cable: metres Pre-wired safety switch.a max inlet positions in deck: mm ø & 55mm ø Outlet size: mm Macerator litre Additional / inlet connector in tank
The Heavy Duty tank pumps have a greater water flow rate for more heavy duty applications... The Aspen Heavy Duty pumps are designed for the rapid removal of condensate. They are particularly useful in situations where multiple refrigeration units are installed, or where large refrigeration systems deposit considerable quantities of condensate at one time. The pump unit is robustly constructed and designed to give reliable performance. This is particularly important in environments where efficient cleanliness is of uptmost importance. Two floats provide the operational control, one to operate the pump, and the other a safety float to be wired into the refrigeration unit control circuit. 6 METRE PT. NO. FP7 METRE PT. NO. FP66 Ideal where multiple refrigeration units are installed Robustly constructed and designed to give reliable performance L Tank capacity / 9 & 5 L/hr max. flow rate FLOW IN LITRES/HOUR HEAVY DUTY PERFORMANCE HD METRE 8 6 HD 6 METRE 6 8 Product Height Width Depth Weight HEAVY DUTY 6 METRE HEAVY DUTY METRE mm mm 5mm.5kg 65mm mm 5mm.kg Tank capacity: litres 6 & metre discharge head No siphoning back Non-return valve amps pre-wired safety switch Plastic tank and pump unit fire retardant plastics inlet positions: mm ø Outlet size: mm heavy duty 6 metre Power supply: V.5A Alternative voltages available Water flow rate: 9 litres per hr heavy duty metre Power supply: V.9A Alternative voltages available Water flow rate: 5 litres per hr
OEM Centrifugal Pumps if just the pump is required... 6/9 & / models Available with or without a macerator, the OEM Centrifugal Pumps can be installed into any refrigeration unit, where just the pump is required. The pump is available in two models; the 6/9, with a flow rate of 9 litres per hour and the /, with a flow rate of litres per hour. Product 6/9 / Height above The Mini Column Pump for small chiller and recirculation duties... Height below 6/9 6 metre discharge head v. a 8w WATER FLOW RATE 9 LITRES PER HOUR / metre discharge head v.7 a 5w WATER FLOW RATE 5 LITRES PER HOUR Fixing plate Weight 95mm mm 5mm x 5mm.kg mm mm 5mm x 5mm.5kg This pump offers high performance and quality at low cost. The pump is typically used in vending machines but can be adapted to suit many different markets. HEAD PSI MINI COLUMN PUMP PERFORMANCE 5 6 8 FLOW (LITRES PER MINUTE) Product MINI COLUMN PUMP Height above Temperature: - C to +9 C Motor options: V-Ph-5Hz thermally protected V-Ph-6Hz Shaft: 6 Stainless steel Sealed upper and lower bearings Supplied with agitator water flow rate litres per hr Height below Fixing plate Weight 6.5mm 76mm 6mm x 9mm.kg Distributor Apex Way Hailsham East Sussex BN7 WA T: + () 888 F: + () 8886 sales@aspenpumps.com www.aspenpumps.com ASPEN-/7