High performance fire-rated LED downlights Fire-rated LED downlights for all applications Equivalent to 50W halogen Durable metal construction Over 80% savings against halogen Tiltable & dimmable versions
Fireguard LED7 - Where technology and trust come together Fireguard LED7 has been designed to retrofit into existing downlight applications with a wide bezel that covers any possible cosmetic damage to the cut out hole on removing the old fitting. The finishes of the metal bezel include Brushed Nickel, which matches the current trend for brushed metal switch and socket plates. Fireguard LED7 is the ideal fire-rated downlight for domestic use, hotels, restaurants or retail outlets. JCC has combined eight years experience in fire-rated lighting with the latest LED technology to deliver an energy efficient, high quality, fully fire-rated LED downlight. With the use of high performance, energy efficient LEDs, a 7W Fireguard LED7 creates a light output equivalent to a traditional 50W halogen fitting. The output exceeds 60 lumens per circuit Watt, in keeping with the current England and Wales building regulations. The low 7W power consumption provides energy savings of over 80% against halogen. The loop in / loop out connections and push in terminal blocks mean that Fireguard LED7 is quick and easy to install. The added reassurance of the 75,000 hours life and 10 year warranty* makes Fireguard LED7 a fit & forget product that won t need to be replaced for many years. It is truly an LED downlight for all applications... The JCC Fireguard range can be identified by its fire-resistant, all-metal enclosed can. Note only does this create a high quality, robust design, it also ensures that flammable dust and debris doesn t build up throughout the life of the fitting; this is a requirement of the Electrical Safety Council as stipulated in their Downlighters & Fire Safety report. Tiltable version now available Exceeds 60 lumens per circuit Watt Fully fire-rated downlight Building regulations compliant 10 year warranty* Exceptionally low energy 7W LED Equivalent to 50W halogen Dimmable Available in cool and warm white White, Chrome & Brushed Nickel finishes *10 year warranty covers domestic applications. Commercial applications are covered by a 5 year warranty. Both require online registration. 360º Rotation www.fireguard-led.co.uk 20º Tilt 1
20 tiltable & 360 rotatable lens Dimmable High power integrated LED tiltable fire-rated downlight Equivalent to 50W halogen 75,000 hours life 10 year extended warranty Fully compliant with Part L Available in Brushed Nickel, Chrome and White IP20 High Quality Steel Can TiltableVersion The gap created by a tiltable lens means the seal between the unit and the ceiling can become compromised in the event of a fire. However, Fireguard LED7 s canned design and patented intumescent plug creates an additional seal that helps the ceiling s fire protection integrity to be maintained. Competitors No Can Version FLAMMABLE DUST & DEBRIS JCC Fireguard LED7 Enclosed Can INTUMESCENT MATERIAL CAN DimmableVersion Fully fire-rated downlight IP65 as standard Exceptionally low energy 7W LED Equivalent to 50W halogen Non-dimmable options available Cool & warm white available Fire tested for 30, 60 & 90 minute ceiling types To be confident about your choice of fire-rated downlight, remember that you can always ask for the test report to check that the product passes the tests for all three ceiling types. If a manufacturer claims that their product is suitable for use in 30, 60 and 90 minute ceilings this does not necessarily mean it has passed the tests for each category. Be safe, always check. Dimmer Switches Having an integrated dimmable driver on your Fireguard LED7 unit allows for even greater control over the light output of your LEDs. As standard on the Tilt and an option on the fixed model, Fireguard LED7 allows you to tailor the level of light for any situation. GAP GAP When using LEDs it is important to ensure that you are using the correct type of dimmer. Fireguard LED7 is compatible with the majority of trailing and leading edge dimmers. Always check the manufacturer s guidelines for the specification of the dimmer switch and be aware that some switches may need to be upgraded if flickering occurs. Code Description Total Wattage JC94181 Fireguard LED7 Mains IP20 7W Dimmable Tilt Downlight 38 Beam 3000K warm white 7W JC94182 Fireguard LED7 Mains IP20 7W Dimmable Tilt Downlight 38 Beam 4000K cool white 7W Code Description Total Wattage JC94172 Fireguard LED7 mains dimmable downlight warm white 7W JC94173 Fireguard LED7 mains dimmable downlight cool white 7W JC94174 Fireguard LED7 mains non-dimmable downlight warm white 7W JC94175 Fireguard LED7 mains non-dimmable downlight cool white 7W For a list of compatible dimmers please go to: /dimmers 3
Suitable as a showerlight IP ratings provide detailed information relating to the level of protection a product can provide against the ingression of dust and water. The first number relates to the protection against solid particles and the second number to its level of protection from moisture. Because Fireguard LED7 is IP65 rated as standard*, not only is it completely sealed against dust, it is also resistant against jets of water and can therefore be used as a showerlight. *This only applies to non-tiltable version IP65 Explained Stands for Ingress Protection Solid Particle Protection Protected against solid objects greater than 1mm IP 6 5 Liquid Ingress Protection Protected against water jets from any direction ConcealerRing A subtle retrofit option for the standard Fireguard LED7 unit where the ceiling cut out may have suffered cosmetic damage For use with ceiling cut outs from 80-110mm in diameter Code JC94183 Description Fireguard LED7 Concealer Ring White (5 per pack) White finish to match ceilings JC94183 ConvertorPlatete Allows the retrofit of a standard Fireguard LED7 unit where larger downlights were previously installed Suitable for use in all ceiling types for cut outs from 80-135mm in diameter Code JC94180 Description Fireguard LED7 Convertor Plate Chrome, White and Brushed Nickel finishes to match bezels EmergencyVersion Explanation of IP numbers First Short Example IP6X Numeral Description 0 Non Protected 1 Protected against solid objects greater than 50mm 2 Protected against solid objects greater than 12mm 3 Protected against solid objects greater than 2.5mm 4 Protected against solid objects greater than 1.0mm 5 Dust Protected 6 Dust Tight Second Short Example IPX5 Numeral Description 0 Non Protected 1 Protected against dripping water 2 Protected against dripping water when tilted up to 15 0 3 Protected against spraying water 4 Protected against splashing water 5 Protected against water jets 6 Protected against heavy seas 7 Protected against the effects of immersion 8 Protected against submersion Emergency lighting is required in many commercial applications when the main power supply fails It operates fully automatically to provide temporary illumination in important areas Because Fireguard LED7 Emergency is a self-contained unit, the benefits include: Easy installation at a lower cost Greater system integrity as each luminaire is run independently The system can be easily extended to accommodate more units Code Description Total Wattage JC94177 Fireguard LED7 Mains IP20 7W Mains Dimmable Emergency Downlight 3000K warm white 7W JC94178 Fireguard LED7 Mains IP20 7W Mains Dimmable Emergency Downlight 4000K cool white 7W 5
Reducing energy consumption With its low energy, high output LEDs, Fireguard LED7 will help reduce your monthly energy bills Ultra low 7W power consumption can save over 80% in energy usage when compared to halogen The increasing cost of energy is becoming a growing concern for households and businesses alike Electricity for lighting is a major expenditure for all types of property and a switch to LED can help to dramatically cut energy costs With LEDs being considered by many as an environmentally friendly light source, a move to Fireguard LED7 will also help reduce your carbon footprint without any compromise in performance Did you know? In a home with 40 50W halogen downlights, a switch to Fireguard LED7 could save you over 4,000 in energy costs over a ten year period Highly efficient lighting: Fireguard LED7 consistently produces over 60 lumens per circuit Watt across the range; this is over 7 times that of a traditional 50 Watt halogen fitting Cost saving calculator Fireguard LED7 vs 50W halogen example Example Calculator JCC 7W LED 50W Halogen JCC 7W LED 50W Halogen Wattage 7 50 7 50 kw 0.007 0.050 0.007 0.050 Operational Hours per Month* 140 140 140 140 kwh 1.0 7.0 1.0 7.0 Cost of Energy per kwh ( ) 0.14 0.14 0.14 0.14 Monthly Cost Per Fitting ( ) 0.14 1.00 0.14 1.00 Multiply the Monthly Cost ( ) by No. Fittings No. Fittings 10 10 Total Cost per Month ( ) = 1.40 10.00 Total over 10 years ( ) 140.00 1,200.00 Energy Cost Savings 1,060.00 Maintenance costs Lamp Cost N/A 1.10 No. of replacements over 10 years (based on a life expectancy of 4,000 hrs) N/A 42 Cost over 10 years ( ) N/A 46.20 Total Fireguard LED7 Saving over 10 years 1,106.20 Payback Period 2.7 years *Based on an average of 4.5 hours per day, 7 days per week Go online to use our interactive cost saving calculator Each Fireguard LED7 fitting can save as much as 9kg of CO 2 per year 7
Fire Safety Tried and tested thermo plastic intumescent plug The patented, petal design provides improved ventilation to maintain the life of the light source. For safety, it swells up to eighty times its size under extreme temperature conditions to seal the back of the fitting in the event of a fire. Traditional JCC fire-rated canned design This protects the heat sink from the build up of flammable dust and debris through the life of the fitting, inline with the Electrical Safety Council s recommendations. This also eliminates the need for a fire hood. Additional intumescent material Unlike many other fire-rated downlights, the Fireguard range includes an extra intumescent ring around the bezel to provide a robust seal around the ceiling cut out in the event of a fire. Energy Saving LED performance Fireguard LED7 at 7W achieves over 500 lumens in cool white and over 400 lumens in warm white. This provides greater than 60 lumens per circuit Watt, which exceeds the requirements of the England and Wales building regulations. Unique lens design A combination of six LED chips and a unique lens design helps Fireguard LED7 to provide a smooth, even spread of light. Glare and heat are minimised and diffused evenly across the front of the fitting. The lens design creates a 38 beam angle. Cost Savings Up to 80% energy cost savings compared to halogen. Quality Construction Loop in / loop out connection & push in terminal blocks Enables quick and easy installation. Integral driver Compact driver housing offers both nondimmable and dimmable options. Adjustable clips High strength steel clips designed to accommodate different ceiling thicknesses. Pressed steel can Central to the quality and performance of the Fireguard LED7 product. High quality silicone seal To provide an acoustic and moisture seal between the front of the fitting and the ceiling in compliance with building regulations parts E and C. Unique crimped heat sink design Offers optimal heat dissipation, which maintains the LEDs at their correct junction temperature and helps to extend the life of the fitting. Insulation overlay (See page 14) Ceiling insulation doesn t require holes to be cut for the fittings. It can be laid over the top of the can, saving valuable fitting time. Wide bezel, die cast aluminium All-metal construction for added durability. Available in White, Chrome and Brushed Nickel to match a variety of decorative finishes. The width of the bezel is ideal for retrofit applications to cover the ceiling cut out where an older fitting has been removed. Concealer Rings and Convertor Plates are also available where cosmetic damage or a larger ceiling cut out is present. (see page 5) 9
30o 100 200 300 30o Understanding Lighting Performance A lighting revolution: from Watts to lumens LED lighting technology is improving the way buildings are lit and changing our understanding of how best to illuminate these spaces to provide the safest, most comfortable and productive environment. Discussions on lighting have traditionally meant using the term Watts. However, the high-efficiency of LED lighting means that discussion of energy consumption becomes much less relevant and the term lumens is becoming the primary measure of lighting performance. Lumens measures light output, while Watts is a measure of energy consumption Lumens Fireguard LED7 efficiently produces over 500 lumens (cool white) and over 400 lumens (warm white) Its use of 6 LED chips in combination with a unique lens design means that light is delivered cleanly and evenly Watts Fireguard LED7 uses only 7 Watts of power For the equivalent light output, a traditional halogen fitting would consume over 7 times the amount of energy LOR LOR (Light Output Ratio) describes the amount of usable light energy entering a room by calculating the light lost within a fitting Fireguard LED7 has an LOR of almost 100% LEDs are incredibly efficient with the energy consumed, with very little being wasted as heat Halogen lamps typically have a lower LOR with large amounts of energy lost as heat within the fitting Lumens per circuit Watt A measure of a light s energy efficiency Lumens per circuit Watt is a measure of a light s energy efficiency this is calculated by dividing the light leaving the fitting by the circuit Wattage Fireguard LED7 has an efficiency of over 60 lumens per circuit Watt Traditional halogen lamps can have an efficiency as low as only 8 lumens per circuit Watt 50W Halogen = 8 lumens per circuit Watt JCC Fireguard LED7 = 60 lumens per circuit Watt Lux A measure of light output A measure of the energy consumed by a fitting The amount of usable light entering a room A measure of light intensity Lux is a measure of the intensity of light as seen by the human eye and is measured by luminous flux per unit area Traditional halogen at 2M = 125 Lux Fireguard LED7 at 2M = 225Lux 50W Halogen = 125 Lux JCC Fireguard LED7 = 225 Lux 50º Beam Angle 38º Beam Angle 50W halogen equivalent Fireguard LED7 is equivalent to a 50W halogen in light output but with a far lower level of energy consumption. 50W Halogen = 8 lumens per circuit Watt JCC Fireguard LED7 = 60 lumens per circuit Watt Life Expectancy Life expectancy of a light fitting is measured in hours and is dependent on the type of light source and the operating environment. Fireguard LED7 = 75,000 hours life expectancy Traditional 50W Halogen = A halogen lamp has a life expectancy of 3,000-5,000 hours. After 3,000 hours an average of 50% of lamps would have failed! Colour Temperature The colour temperature of a light source is measured in degrees Kelvin. A higher colour temperature will produce a cooler more natural light suitable for use in kitchens and bathrooms. A lower colour temperature will produce a warmer light more suited to bedrooms and living rooms. Kelvin Temperature Chart 1500ºK 2200ºK Living rooms, bedrooms 3000ºK 2700ºK Fireguard LED7 warm white 4000ºK Fireguard LED7 cool white 4200ºK Bathrooms 5500ºK Cool White Warm White Light Output 500 Lumens 450 Lumens Colour Temperature 4000 Kelvin 3000 Kelvin 8000ºK Ceiling level 90 o 90o 60 o 60o 0 o Please refer to website for photometric.ldt files 11
Insulation The canned design of Fireguard LED7 allows ceiling insulation to be laid directly over the back of a fitting* Time is saved during installation, the fitting remains protected and the performance of the insulation is not compromised. *Ceiling insulation can be laid over the top of the fitting but it is important that it is not packed around Standard ceiling & insulation Quality & assurance that you can trust 10 Year Extended Warranty The Fireguard LED7 range is covered by a 10 year warranty*. The 10 year warranty is only valid if the consumer/end-user registers this product online. Please visit the Fireguard LED website for registration details. Without a warranty registration the product has a 24 month guarantee. This doesn t affect your statutory rights. *5 years for commercial applications 1 2 3 Ceiling cut out created for fitting LED7 unit placed into ceiling Insulation remains in place Checklist for buying fire-rated LED fittings Fire Safety Features: Traditional JCC canned design Tried and tested intumescent material No need for a fire hood Tested for 30, 60, 90 minute ceilings Features: IP65* Wide die cast aluminium bezel Loop in / loop out and push in terminal blocks White, Chrome and Brushed Nickel bezel finishes Dimmable versions Tiltable Insulation protection Adjustable ceiling clips Benefits: Quality Construction Protects the heat sink from the build up of flammable dust and debris through the life of the fitting, in line with the Electrical Safety Council s recommendations Patented intumescent thermo plastic plug allows heat to escape and seals the back of the fitting in the event of a fire Saves additional costs and time on installation Meets building regulation Part B Benefits: Ideal for all types of applications, including bathrooms Strong, durable construction that is idea for fitting into both new builds and existing installations and cut outs Easy to install; no tools required Designed to match a variety of applications Suitable for a wide range of leading and trailing edge dimmer switches For wall-washes and accent lighting Quicker and easier installation Suitable for fitting into different ceiling thicknesses 10 year warranty** Gives confidence throughout the life of the fitting LED Technology Features: Benefits: 7 Watt power consumption Lower power consumption and reduced energy costs compared to 50W halogen 75,000 hours life Fit and forget Produces greater than 60 lumens per circuit Watt 6 LED chips and unique lens design Cool white and warm white versions Meets building regulations part L & L2 domestic and non-domestic Gives a smooth, even spread of light. Glare and heat are minimised and diffused evenly across the front of the fitting Fulfils the requirements for various applications and situations *IP65 only applies to non-tiltable version ** For products being used up to 8 hours a day 13
What happens if there is some damage to the cut out hole when I remove the old downlights? Q&As Will the light output of Fireguard LED7 appear the same as the halogen equivalent? Yes, the lumen output is exceptionally high and is comparable to a 50W halogen downlight. This isn t a problem as the bezel on Fireguard LED7 is designed to be wide enough to cover any damage and leave a neat, tidy finish. Concealer rings and convertor plates are also available where cosmetic damage or a larger ceiling cut out is present. (see page 5) How easy are the new Fireguard LED7 downlights to install? No tools are required once the hole is cut in the ceiling. Fireguard LED7 downlights are designed to be very quick and easy to install. Each product comes with a loop in / loop out connector and push to fit terminal blocks. Can Fireguard LED7 downlights be dimmed? Why do I need to use fire-rated downlights? Most downlights have an open back and offer no seal or protection to the ceiling in the event of a fire. This means that the cut out hole has broken the fire-rating of the ceiling so heat and flames would be able to spread into upper floors. This is not true of fire-rated downlights which are designed to maintain a ceiling s fire protection integrity. Yes, Fireguard LED7 comes in non-dimmable and dimmable options and is compatible with the majority of trailing and leading edge dimmers. What commercial applications can use Fireguard LED7? Fireguard LED7 can be used in a wide variety of applications and is not limited to residential dwellings; it is an ideal solution for commercial projects such as restaurants, bars, retail outlets and hotels. See page 5 for information on our emergency version of Fireguard LED7. How is Fireguard LED7 unique as a fire-rated downlight? The Electrical Safety Council advises that an enclosed can on the back of a downlight will provide protection from the build up of flammable dust and debris. Not only does Fireguard LED7 provide protection with its can design, it also includes intumescent material on the back of the product which swells to seal any ventilation gaps in the event of a fire. What are the colour temperatures of Fireguard LED7? Fireguard LED7 is available in warm white (3000K) and cool white (4000K). Warm white is typically best suited to bedrooms and reception areas and cool white is ideal for lighting bathrooms, kitchens and other work spaces. Does Fireguard LED7 pass part L of the England and Wales building regulations? Yes, the 2010 England and Wales building regulations stipulate that fittings must be a minimum of 400 lumens and 45 lumens per circuit Watt, this is exceeded in both the warm and cool white options. Can I use Fireguard LED7 in showers and bathrooms? Fireguard LED7 is designed for interior projects and is also rated IP65 as standard (non-tilt version). Which means it can be installed in bathrooms and shower rooms. Can I remove old halogen downlights and replace them with the new Fireguard LED7 downlights? Yes, regardless of whether the downlights were low voltage or mains voltage halogen (i.e. with or without a transformer), the new Fireguard LED7 is a direct replacement. Each product comes with an integrated LED driver so it is a like for like replacement. Our dedicated team are more than happy to answer any questions that you may have about the JCC Fireguard LED7 More Q&As available online 15
Complies With Building Regulations Contact us With its high levels of energy efficiency and quality construction, Fireguard LED7 is fully compliant with all relevant building regulations for both new builds and retrofit projects. Part L The 2010 England & Wales building regulations state the following criteria for domestic and non-domestic buildings. Fireguard LED7 passes the criteria for both domestic and non-domestic buildings. Domestic Energy performance compliance of lighting for new and existing domestic buildings Our team has specific knowledge of LED lighting and can offer qualified advice on how this exciting new development can be easily integrated into a traditional lighting design. JCC Lighting is a leader in bringing quality, high performance LED lighting products to market. We pride ourselves on developing innovative, low energy products using the latest LED technology. We offer a total LED lighting solution for a wide variety of domestic and commercial applications; from housing and offices to hospitals and hotels. JCC Lighting Lighting: Fixed internal lighting New and replacement systems: a) In the areas affected by the building work, provide low energy light fittings (fixed lights or lighting units) that number not less than three per four of all the light fittings in the main dwelling spaces of those areas (excluding infrequently accessed spaces used for storage, such as cupboards and wardrobes). b) Low energy light fittings should have lamps with a luminous efficacy greater than 45 lamp lumens per circuit Watt and a total output greater than 400 lamp lumens. Light fittings whose supplied power is less than 5 circuit Watts are excluded from the overall count of the total number of light fittings. Telephone: 01243 838999 Fax: 01243 838998 Email: sales@jcc.co.uk Website: www.jcc.co.uk New and refurbished non-domestic Energy performance compliance of lighting for new and existing buildings other than domestic buildings Lighting Type: General lighting in office, industrial and storage areas General lighting in other types of space Display lighting Minimum lighting efficacy: The average initial efficacy should be not less than 55 luminaire lumens per circuit Watt The average initial efficacy should be not less than 55 lamp lumens per circuit Watt The average initial efficacy should be not less than 22 lamp lumens per circuit Watt Parts B, C and E Fireguard LED7 also passes Part B Fire Safety, Part C Moisture Protection and Part E Acoustic Standard as you would expect from any Fireguard product. 17
Go online to get an in-depth look at the benefits of Fireguard LED7 Video case studies Interactive cost saving calculators Design & development videos The perfect solution for: Residential, Restaurants, Hotels, Retail & Bars JCC Lighting Products Ltd Innovation Centre, Beeding Close, Southern Cross Trading Est, Bognor Regis, West Sussex PO22 9TS Sales Tel: 01243 838999 Email: sales@jcc.co.uk Sales Fax: 01243 838998 Web: www.jcc.co.uk JCC Lighting Products Limited 2012 LIT0049