Product catalogue. Solutions for the Poultry segment

p o u lt ry Product catalogue Solutions for the Poultry segment

INDEX Poultry farms p. 3 Features p. 6 Air extraction p. 8 Air circulation p. 14 Light filter & Fan insulation p. 16 Air heating p. 19 Air inlet p. 26 Cooling p. 33 Environmental p. 38 Controllers p. 41 2 Munters AB, 2018

POULTRY FARMS Munters AB, 2018 3

POULTRY FARMS - YOU NEED IT WE HAVE IT AIR EXTRACTION CONTROLLERS AIR CIRCULATION AIR CLEANING Layer House Broiler House LIGHT FILTER & FAN INSULATION COOLING Breeder House AIR HEATING AIR INLET 4 Munters AB, 2018 5

6 Munters AB, 2018 FEATURES

HIGH EFFICIENCY In the high end of Munters Agriculture products there is more and more interest for high efficiency products: the European community has introduced a regulation which determines the minimum acceptable efficiency rate for exhaust fans, moreover customers are more sensitive to running cost of the fans and to the quantity of energy necessary for moving a certain amount of air. Munters response to this demand of high efficiency products is represented by the new line of EDHE fans, designed for being fully compliant with European Ecodesign directives, by the cone fans EC50 and EC52, offering an improvement in the range of 10-15% of the performances thank s to introduction of discharge cone. Recently Munters has designed and patented a unique EC motor, designed for working in conjunction with cone fan, able to offer an unbelievable level of efficiency and airflow. MUNTERS PROTECT In agriculture, corrosion is usually caused by a combination of many factors such as ph, high humidity levels, frequent contact with water, aggressive chemicals as found in manure or disinfectants, bacterial growth; and the list goes on. The industry is also continuously evolving and that might have surprising side effects: new agricultural chemicals or feed additives might do wonders for animal or plant health, but also enhance corrosion on metal products. For offering a consistent remedy to corrosion troubles Munters switched to a new material, called Munters Protect, which offers extremely high protection against corrosion. It consists of a coating made of Zinc, Aluminum and Magnesium and it delivers the best corrosion resistance performance, up to 10 times better than galvanised steel. MOTORS Munters is able to offer a wide range of motor power, depending on the application and the fan size. The smallest fan Munters produces, the 18 air recirculator EDC18 is equipped by a 0.33 Hp motor. The minimum ventilation fans and air recirculators can be equipped by a 0.5 or 0.75 Hp motor. The exhaust fan used for tunnel ventilation can be equipped by 1.0 or 1.5 Hp motor. For the recent production of big diameter fans, like EM52 and EC52, Munters has fitted them with a powerful 2.0 Hp motor. Most of the models of fans allows speed control obtained either by inverter (VFD) or autotransformer. This huge flexibility in the offering has been developed for being able to cover any demand in terms of airflow which might rise from our customers. MUNTERS DRIVE Ventilation inefficiencies are mainly related to 3 major causes: the types of motors used as the design of AC motor has physical limitations; the belt drive systems as the friction on the transmission components energy causes an energy loss and a high level of maintenance; the fixed single revolution speed and consequent fixed capacity, which prevents energy savings when ventilation demand is low. Munters Drive avoids these limitations through 3 innovations: a new motor architecture which shows a more efficient performance; the direct drive which makes the motor turning at the same revolution speed as the optimum propeller speed, eliminating friction losses and the need of maintenance; and the variable speed which reduces the motor speed and fan capacity when ventilation demand is low, generating significant energy savings. By combining the energy efficiency benefits that a Munters Drive offers over a conventional fan, users have been able to reduce annual ventilation costs by up to 40% and additionally saved a similar amount in maintenance cost reduction. LOADING VOLUMES Munters has developed an optimized loading displacement for combined loads on 20ft, 40ft and 40ft high cube containers and standard trailers*, which allows to balance volume and weight for delivery of complete system of fans, pad, accessories and heaters. Fans can be delivered assembled, in partially assembled form and fully disassembled depending on the number of products involved. The cooling pad and other accessories can be stored as well inside the container/trailer in order to completely fill the empty space fore and optimize the transport costs. Therefore, all the loading volumes shown in the catalogue are just a few of the many loading options available. Assembly manuals are provided for easy mounting of the received products. * 13.60x2.40x2.60m Munters AB, 2018 7

8 Munters AB, 2018 AIR EXTRACTION

EUROEMME EC52 WITH MUNTERS DRIVE WALL FAN Patented EC motor for excellent energy reduction over standard AC motors Maintenance free: no belts to tension or replace Soft start for eliminating energy spikes Variable speed for providing a wide range of air flow with excellent efficiency values Strong and efficient steel propeller, discharge cone for best achievements in performances and strength Shutter operated by gear motor: opening not linked to air flow or propeller spin Ideal fan for minimum ventilation applications PERFORMANCES Motor 260 rpm 370 rpm 495 rpm Airflow at 0 Pa m 3 /h [cfm] 28,500 [16,800] 40,700 [24,000] 53,200 [31,300] Airflow at 12 Pa m 3 /h [cfm] 24,300 [14,300] 37,700 [22,200] 51,400 [30,200] Airflow at 25 Pa m 3 /h [cfm] 15,200 [8,900] 34,600 [20,400] 49,400 [29,100] Specific performance at 12 Pa m 3 /h/w [cfm/w] 81.2 [47.8] 49.9 [29.4] 30.6 [18.0] Specific performance at 25 Pa m 3 /h/w [cfm/w] 48.0 [28.3] 43.8 [25.8] 28.4 [16.7] * All values refer to 3 phases 50Hz single speed motors. Note: airfl ow data are measured at standard conditions (20 C, 1,013hPa) LOADING VOLUMES Container 20 ft pcs. 11 Container 40 ft pcs. 23 Container 40 ft HC pcs. 23 Trailer 13.60x2.40x2.60 m pcs. 26 EUROEMME EC52 WALL FAN Family member of the time proven Euroemme fan range High airflow and high efficiency Compact transportation (discharge cone made of 4 cone sectors) Special cone design for optimal use of installation space Patent pending shutter opening device Four blade propeller for reduced vibrations Optional belt tensioner Optional 4 shaped cone sectors PERFORMANCES Motor 1.0Hp 2.0Hp Airflow at 0 Pa m 3 /h [cfm] 42,200 [24,900] 49,500 [29,100] Airflow at 25 Pa m 3 /h [cfm] 35,100 [20,700] 44,700 [26,300] Airflow at 50 Pa m 3 /h [cfm] 26,200 [15,400] 36,400 [21,400] Specific performance at 0 Pa m 3 /h/w [cfm/w] 43.7 [25.7] 32.7 [19.2] * All values refer to 3 phases 50Hz single speed motors. Note: airfl ow data are measured at standard conditions (20 C, 1,013hPa) LOADING VOLUMES ASSEMBLED DISASSEMBLED Container 20 ft pcs. 14 100 Container 40 ft pcs. 30 220 Container 40 ft HC pcs. 30 220 Trailer 13.60x2.40x2.60 m pcs. 36 250 Munters AB, 2018 9

EUROEMME EM52 WALL FAN Family member of the time proven Euroemme fan range Fan built with outstanding strength for assuring high airflow at static pressure of up to 100 Pa Fan housing and Venturi made of strong Munters Protect coated sheet-steel Redesigned 52 propeller suited for high static pressure environments Shutters are made of pressed Munters Protect coated steel in order to ensure highest strength Patented centrifugal system permits an energy efficient solution PERFORMANCES Motor 2Hp Airflow at 0 Pa m 3 /h [cfm] 43,000 [25,300] Airflow at 50 Pa m 3 /h [cfm] 33,900 [19,900] Airflow at 75 Pa m 3 /h [cfm] 27,600 [16,200] Airflow at 100 Pa m 3 /h [cfm] 19,200 [11,300] Specific performance at 0 Pa m 3 /h/w [cfm/w] 26.4 [15.5] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) LOADING VOLUMES ASSEMBLED DISASSEMBLED Container 20 ft pcs. 29 120 Container 40 ft pcs. 58 250 Container 40 ft HC pcs. 58 250 Trailer 13.60x2.40x2.60 m pcs. 65 280 EUROEMME EM50 WALL FAN Family member of the time proven Euroemme fan range Propeller is statically and dynamically balanced Patented centrifugal system permits an energy efficient solution Powerful springs keep shutters firmly closed when fan is not operating Every fan is individually checked for quality Fan housing and Venturi made of strong Munters Protect coated sheet-steel Shutters are made of pressed Munters Protect coated steel in order to ensure highest strength Central hub and v-belt pulley are made from die-cast aluminium, with reinforced ribs for prolonged lifetime PERFORMANCES Motor 1.0/1.2Hp 1.5Hp Airflow at 0 Pa m 3 /h [cfm] 37,000 [21,800] 42,400 [25,000] Airflow at 25 Pa m 3 /h [cfm] 32,500 [19,200] 38,400 [22,600] Airflow at 50 Pa m 3 /h [cfm] 26,200 [15,400] 33,800 [19,900] Specific performance at 0 Pa m 3 /h/w [cfm/w] 33.9 [20.0] 27.0 [15.9] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) LOADING VOLUMES ASSEMBLED DISASSEMBLED Container 20 ft pcs. 29 170 Container 40 ft pcs. 58 250 Container 40 ft HC pcs. 58 250 Trailer 13.60x2.40x2.60 m pcs. 65 300 10 Munters AB, 2018

EUROEMME EM36 WALL FAN Fans EM 36 do not respond to minimum efficiency parameters required by Regulation No 327/2011 (ErP Regulation). The respect of minimum efficiency parameters is a requirement of CE documentation, therefore fans which do not respect these parameters cannot any longer have the CE label and the CE certification. These fans cannot be sold into countries where Regulation No 327/2011 is applied ( i.e European Community). Patented centrifugal system permits an energy efficient solution Every fan is individually checked for quality Fan housing and Venturi made of strong Munters Protect coated sheet-steel Shutters are made of pressed Munters Protect coated steel in order to ensure highest strength Central hub and v-belt pulley are made from die-cast aluminium, with reinforced ribs for prolonged lifetime PERFORMANCES Motor 0.5Hp 0.75Hp 1.0Hp Airflow at 0 Pa m 3 /h [cfm] 18,800 [11,070] 20,500 [12,080] 23,400 [13,760] Airflow at 25 Pa m 3 /h [cfm] 16,000 [9,420] 18,100 [10,630] 21,400 [12,610] Specific performance at 0 Pa m 3 /h/w [cfm/w] 32.6 [19.2] 27.2 [16.0] 22.6 [13.3] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) LOADING VOLUMES ASSEMBLED DISASSEMBLED Container 20 ft pcs. 54 170 Container 40 ft pcs. 108 300 Container 40 ft HC pcs. 108 300 Trailer 13.60x2.40x2.60 m pcs. 120 360 EUROEMME EM30 WALL FAN Fans EM 36 do not respond to minimum efficiency parameters required by Regulation No 327/2011 (ErP Regulation). The respect of minimum efficiency parameters is a requirement of CE documentation, therefore fans which do not respect these parameters cannot any longer have the CE label and the CE certification. These fans cannot be sold into countries where Regulation No 327/2011 is applied (i.e European Community). Patented centrifugal system permits an energy efficient solution Every fan is individually checked for quality Fan housing and Venturi made of strong Munters Protect coated sheet-steel Shutters are made of pressed Munters Protect coated steel in order to ensure highest strength Central hub and v-belt pulley are made from die-cast aluminium, with reinforced ribs for prolonged lifetime PERFORMANCES Motor 0.5Hp 0.75Hp Airflow at 0 Pa m 3 /h [cfm] 14,100 [8,300] 15,300 [9,020] Airflow at 25 Pa m 3 /h [cfm] 12,100 [7,120] 13,600 [8,030] Specific performance at 0 Pa m 3 /h/w [cfm/w] 24.4 [14.4] 22.1 [13.0] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) LOADING VOLUMES ASSEMBLED DISASSEMBLED Container 20 ft pcs. 72 200 Container 40 ft pcs. 144 400 Container 40 ft HC pcs. 144 400 Trailer 13.60x2.40x2.60 m pcs. 168 400 Munters AB, 2018 11

EUROEMME ED24HE - ED30HE - ED36HE WALL FAN Fans belonging to ED HE serie are fully compliant with minimum efficiency parameters required by Regulation No 327/2011 (ErP Regulation). The respect of minimum efficiency parameters is a requirement of CE documentation, therefore these fans are fully CE compliant and suitable for installation into any European Country. Family members of the time proven Euroemme fan range High airflow capacity with excellent energy efficiency Low power consumption Direct drive system Patented shutter-opening device PERFORMANCES Model ED24HE ED30HE ED36HE Motor 0.5Hp 0.5Hp 0.75Hp Airflow at 0 Pa m 3 /h [cfm] 9,100 [5,360] 14,400 [8,460] 19,100 [11,300] Airflow at 12 Pa m 3 /h [cfm] 8,800 [5,180] 13,700 [8,080] 18,200 [10,700] Airflow at 25 Pa m 3 /h [cfm] 8,400 [4,960] 12,900 [7,620] 17,200 [10,100] Specific performance at 0 Pa m 3 /h/w [cfm/w] 17.3 [10.2] 22.1 [13.0] 30.3 [17.8] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) LOADING VOLUMES ASSEMBLED DISASSEMBLED Model ED30HE ED36HE ED30HE ED36HE Container 20 ft pcs. 72 54 180 160 Container 40 ft pcs. 144 108 400 320 Container 40 ft HC pcs. 144 108 400 320 Trailer 13.60x2.40x2.60 m pcs. 168 120 400 360 WM54F WALL FAN Rigid and durable fiberglass housing Insulated and sealed damper door to reduce condensation, light and air leaks Polymer Engineered UV protected cone and damper door Inlet guard mounts flush with inside of building framing, without needing an additional housing Automotive grade sealed drive bearing and 3x sealed tensioner pulley bearing Model 1.5Hp 2.0Hp Number of blades 3 Propeller diameter mm [inch] 1,377 [54] Weight of fully equipped fan1 [kg] 132 135 Airflow at 0 Pa2 m 3 /h [cfm] 50,700 [29,800] 55,500 [32,600] Airflow at 25 Pa2 m 3 /h [cfm] 44,200 [26,000] 50,000 [29,400] Airflow at 50 Pa2 m 3 /h [cfm] 35,600 [21,000] 42,700 [25,200] Specific performance at 0 Pa2 m 3 /h /W [cfm /W] 46.4 [27.3] 36.3 [21.4] Max. operating temperature C [ F] 40 [104] Nominal propeller speed [rpm] 515 570 IEC protective class of electric motor Electric motor winding insulation grade IP55 F 1 INCLUDES SAFETY KIT FOR INSTALLATION BELOW 2.7M ABOVE THE FLOOR. 2 ALL DECLARED VALUES ARE MEASURED AND CERTIFIED BY BESS LAB (TEST #15631 AND #15632). AIRFLOW DATA ARE MEASURED AT STANDARD CONDITIONS (20 C, 1,013 HPA). 12 Munters AB, 2018

TU600 - TU800 CHIMNEY FAN Bell mouth inlet and cone outlet ensure very high energy efficiency Designed to withstand climatic extremes and solar radiation All components made of highly corrosion resistant materials Insulated butterfly damper for tight seal when fan is not in use Aerodynamic design ensures a low noise level Patented click system allows for compact transport volumes and quick on-site assembly High efficiency Munters Drive motor version available on request PERFORMANCES Model TU600 TU800 Motor type STD MUNTERS DRIVE STD MUNTERS DRIVE Motor size [W] 250 660 370 430 550 660 Airflow at 0 Pa Airflow at 20 Pa Airflow at 40 Pa m 3 /h [cfm] m 3 /h [cfm] m 3 /h [cfm] 11,720 [6,898] 10,740 [6,321] 9,560 [5,627] 12,729 [7,492] 12,090 [7,116] 11,414 [6,718] 6,152 [3,621] 4,553 [2,680] - 18,650 [10,977] 17,230 [10,141] 15,460 [9,099] 19,820 [11,666] 18,290 [10,765] 16,730 [9,847] 19,875 [11,698] 18,329 [10,788] 16,728 [9,846] 20,653 [12,156] 19,364 [11,397] 18,244 [10,738] 11,042 [6,499] 8,741 [5,145] 3,881 [2,284] Specific performance at 0 Pa m 3 /h/w [cfm/w] 27.5 [16.2] 28.4 [16.7] 91.4 [53.8] 31.7 [18.6] 33.0 [19.4] 25.0 [14.7] 34.0 [20.0] 116.0 [68.3] Specific performance at 20 Pa m 3 /h/w [cfm/w] 24.0 [14.1] 24.9 [14.7] 57.2 [33.7] 27.0 [15.9] 27.0 [15.9] 22.0 [12.9] 27.8 [16.4] 66.5 [39.1] Specific performance at 40 Pa m 3 /h/w [cfm/w] 20.1 [11.8] 22.0 [13.0] - 23.0 [13.5] 22.4 [13.2] 19.1 [11.3] 24.0 [14.1] 27.8 [16.4] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) High light reduction factor. ACCESSORIES: LIGHT FILTER FOR TU EXHAUST AIR SYSTEM AGROFLEX CHIMNEY FAN Large selection of duct diameters from 370 (14,5) to 1,270 mm (50 inch) Air capacity from 5,000 (2,900) up to 52,000 m3/h (30,600 cfm) Sound reduction with the REVENTA duct silencer up to 12 db(a) Perfect insulation of 0.022W/mK to avoid condensation Covering layers made from reinforced polyester, chemical resistant and easy to clean Extensive components programme PERFORMANCES ø / mm (interior) ø / mm (outer) Air flow (m3/h) - Pressure (Pa) 400V 230V 520 580 9,100 8,300 7,600 8,700 7,900 7,300 580 640 10,000 8,800 7,600 9,900 8,600 7,200 650 710 14,200 12,500 10,600 13,900 12,400 10,500 730 790 19,500 17,600 16,000 18,500 16,600 14,800 820 880 26,000 23,900 22,000 25,600 22,900 20,600 920 980 26,100 23,100 20,700 25,300 22,000 18,600 1,270 1,330 52,300 46,200 42,500»AGROFLEX«duct (3 m) with pur intake nozzle, diffuser and shutter. air flows of other fans are mentioned in the chapter entitled electrics. Munters AB, 2018 13

14 Munters AB, 2018 AIR CIRCULATION

EUROEMME EDC18HE - EDC24HE CIRCULATION FAN EDC HE serie has been designed for moving a large quantity of air with high efficiency and low noise emission. Recommended whenever the energy efficient operation and the noise level into the house are a requirement. Family member of the time proven Euroemme fan range High airflow and high efficiency Low power consumption, results in lower energy cost Direct drive system Improves indoor air quality by preventing air stratification and condensation Fast and easy installation PERFORMANCES Model EDC18HE EDC18HE EDC24HE Motor 4 poles - 0.33Hp 6 poles - 0.15Hp 4 poles - 0.5Hp Airflow at 0 Pa m 3 /h [cfm] 5,046 [2,970] 3,483 [2,050] 10,087 [5,937] Specific performance at 0 Pa m 3 /h/w [cfm/w] 15.6 [9.2] 17.2 [10.1] 17.7 [10.4] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) EUROEMME EDC18 - EDC24 CIRCULATION FAN Family member of the time proven Euroemme fan range Air circulation reduces heating costs Condensation inside structures can be reduced by using air blowers Livestock comfort and growth rate can be improved by using air blowers Air blower housing is made of corrosion resistant, pre-coated, Munters Protect coated sheet-steel Each motor is individually tested for 100% quality control Propeller is statically and dynamically balanced PERFORMANCES Model EDC18 EDC18 EDC24 Motor 4 poles - 0.33Hp 6 poles - 0.15Hp 6 poles - 0.5Hp Airflow at 0 Pa m 3 /h [cfm] 3,950 [2,325] 2,600 [1,530] 7,400 [4,350] Specific performance at 0 Pa m 3 /h/w [cfm/w] 9.2 [5.4] 16.1 [9.5] 11.2 [6.6] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) EUROEMME EDS24HE - EDS30HE - EDS36HE - EDT30HE CIRCULATION FAN Family members of the time proven Euroemme fan range High airflow capacity with excellent energy efficiency Low power consumption Direct drive system Special threaded bushes on fan s side panels permit the fan to be easily hung PERFORMANCES Model EDS24HE EDS30HE - EDT30HE EDS36HE Motor 0.5Hp 0.5Hp 0.75Hp Airflow at 0 Pa m 3 /h [cfm] 9,100 [5,360] 14,400 [8,460] 19,100 [11,300] Specific performance at 0 Pa m 3 /h/w [cfm/w] 17.3 [10.2] 22.1 [13.0] 30.3 [17.8] * All values refer to 3 phases 50Hz single speed motors. Note: airflow data are measured at standard conditions (20 C, 1,013hPa) Munters AB, 2018 15

LIGHT FILTER & FAN INSULATION 16 Munters AB, 2018

LFD24 - LFD30 - LFD36 - LFD50 - LFD52 LIGHT FILTER High light reduction factor Low resistance to airflow Suitable for mounting onto fans Suitable for mounting onto air inlets Suitable for mounting onto pad openings Easily washable Compact transport dimensions Quick and easy assembly Housing in Munters Protect DIMENSIONS Model LFD24 LFD30 LFD36 LFD50 LFD52 Length [mm] 750 950 1,100 1,380 1,430 Height [mm] 750 950 1,100 1,380 1,430 Width [mm] 230 230 230 230 230 WALL MOUNTING LIGHT FILTER Can be directly connected to conventional box fans Easy to remove for cleaning purposes Also available non-assembled for reduced transport costs Light filter for box fans with single shaft, which prevents the penetration of light by > 99.999% Other brands and special dimensions are available on inquiry Material: Frame from galvanised steel, lamella from PP DIMENSIONS Model Height [mm] Width [mm] Depth [mm]»zew«1500 381 670 183»ZEW«2500 750 950 1,100»ZEW«Professional 1300 230 230 230»ZEW«5000 427 1,190 183»ZEW«Professional 2100 519 760 183»safe-let«600 542 710 183»safe-let«800 542 920 183»safe-let«1000 542 1,120 183»safe-let«1200 542 1,420 183»ZEW«Professional 2900 611 830 183»AIRSTEP«/2 772 1,190 183»AIRSTEP«/3 1,140 1,190 183»safe-let«1200/2 1,071 1,420 183»AIRSTEP«/4 1,501 1,190 183»safe-let«1200/3 1,501 1,420 183»AIRSTEP«/5 1,818 1,190 183 Munters AB, 2018 17

FI36 - FI50 - FI52 INSULATION PANEL Reduced heat loss through fans during winter by up to 7 times Cost saving by reducing heating cost Quick and easy to install and mount Fits all Euroemme extraction fans snugly Can be installed on air inlet or exhaust sides of fans Installation kits include all accessories required for installation Can be fitted onto other brands of exhaust fans with similar dimensions DIMENSIONS Model FI36 FI50 FI52 Length [mm] 1,092 1,382 1,430 Height [mm] 1,092 1,382 1,430 Width [mm] 35 35 40 ISOPANEL FOR WALL FANS INSULATION PANEL PUR part seals completely tight with circumferential seal Good cleaning properties due to smooth surface Ease of handling due to practical carry handle Can be used in conjunction with a light filter High insulation value due to low thermal conductivity 0.00762 W/ft. F DIMENSIONS SUITABLE FOR 1,380 x 1,380 x 40 50 -box fans 18 Munters AB, 2018

AIR HEATING Munters AB, 2018 19

GAS HIGH PRESSURE (Bar) / Direct fired GA30 AIR HEATER Direct fired - open combustion chamber Lean technology, versatile and easy to use Efficiency 100%, no losses in the system Functions on LPG at medium pressure (Bar) Fan heater entirely made of stainless steel Room thermostat or On/Off dry contact through an ILME plug socket (3P+G) Error proof design e.g. safety thermostat, ionization probe, double solenoid valves CE marked GA95T AIR HEATER Direct fired - open combustion chamber Lean technology, versatile and easy to use Efficiency 100%, no losses in the system Functions on LPG at medium pressure (Bar) Fan heater entirely made of stainless steel Room thermostat or On/Off dry contact through an ILME plug socket (3P+G) Error proof design e.g. air pressure switch, safety thermostat, ionization probe, double solenoid valves CE marked PERFORMANCES & DATA Model GA30 GA95T Heating power kw [kcal/h] 25.0 to 36.0 [21,500 to 30,960] 97.0 [83,400] Gas consumption propane gas* [kg/h] 1.75 to 2.51 6.90 IP class** IP54 IP54 Electrical line * Density values refer to the standard ambient conditions. ** Electric box IP grade. 230V; 4.5A; 700W LOADING VOLUMES Model GA30 GA95T Container 20 ft pcs. 66 38 Container 40 ft pcs. 138 80 Container 40 ft HC pcs. 138 119 Trailer 13.60x2.40x2.60 m pcs. 156 150 20 Munters AB, 2018

GAS LOW PRESSURE (millibar) / Indirect fired GPmp100 - GPmp130 - GPmp160 AIR HEATER Indirect fired - closed combustion chamber Well proven robust and reliable design technology Riello oil burner already installed and preset Cylindrical combustion chamber and heat exchanger Thermal efficiency exceeding 90% Direct drive motor, axial or centrifugal options available Very powerful centrifugal fan for connection of air duct (up to 60m) Munters Protect housing with extended warranty Single or double air outlet options Room thermostat or On/Off dry contact through an ILME plug socket (3P+G) Fan blower controlled by a Fan-thermostat to avoid cold air drafts (set temperature 30 ) Error proof design with limit-thermostat (set temp.90 C) and safety thermostat (set temp. 100 ) CE marked PERFORMANCES & DATA Model GPmp100 GPmp130 GPmp160 Maximum heating power kw [kcal/h] 102.4 [88,043] 129 [110,871] 157 [134,780] Working heating power kw [kcal/h] 93 [79,943] 116.5 [100,120] 141 [121,030] Gas consumption natural gas [m 3 /h] 9.53 12.39 15.25 Gas consumption propane gas* [kg/h] 7.15 9.29 11.43 Rated Current (axial) A 3.0 5.0 5.9 Rated Current (centrifugal) A 5.5 8.0 8.1 Rated Power (axial) W 1400 2200 2600 Rated Power (centrifugal) W 2200 3700 3750 Delta P available at air outlet (axial) Pa 20 40 30 Delta P available at air outlet (centrifugal) Pa 150 220 160 IP class** IP54 IP54 IP54 * Nominal consumption at 15 C and 1,013.25mbar. ** Electric box IP grade. LOADING VOLUMES Model GPmp100 GPmp130 GPmp160 Container 20 ft pcs. 12 12 10 Container 40 ft pcs. 24 24 11 Container 40 ft HC pcs. 24 24 22 Trailer 13.60x2.40x2.60 m pcs. 28 28 24 Note: Shipping volumes include chimney kit, air outlet and air suction kit. Munters AB, 2018 21

OIL (DIESEL) / Indirect fired GFn85 AIR HEATER Lean technology, versatile and easy to use Munters diesel burner (Danfoss diesel pump) Very ergonomic for optimized container shipping (96pcs. per 40ft container) Cylindrical combustion chamber and heat exchanger Thermal efficiency exceeding 80% Munters Protect housing with extended warranty or stainless steel AISI 430 housing Room thermostat or On/Off dry contact through an ILME plug socket (3P+G) Error proof design, photocell and overheating thermostat CE marked PERFORMANCES & DATA Maximum heating power kw [kcal/h] 80.6 [69.303] Working heating power kw [kcal/h] 69.3 [59,587] Diesel oil consumption l/h [gal/h] 7.5 [1.98] IP class** IP55 Electrical line 230V; 5.5A; 750W ** Electric box IP grade. LOADING VOLUMES Container 20 ft pcs. 48 Container 40 ft pcs. 108 Container 40 ft HC pcs. 108 Trailer 13.60x2.40x2.60 m pcs. 120 22 Munters AB, 2018

GAS LOW PRESSURE (millibar) / Direct fired HEAT-X TYPE DG AIR HEATER Direct fired - open combustion chamber Efficiency 100%, no losses in the system Very high air flow and air throw up to 45m Fan heater entirely made of stainless steel Proven robust and reliable gas technology Easy to service due to precise error indications (code) Remote alarm or status connection through interface board Due to big opening the heat exchanger can be easily cleaned or serviced Hourly self-check to avoid dangerous CO2 accumulation Error proof design e.g. wind vane, safety thermostat, ionization probe, gas switch Connection of separate air blower to work in synchrony CE marked PERFORMANCES & DATA Model»Heat-X«Type 4DG»Heat-X«Type 5DG»Heat-X«Type 6DG Heating output kw 75 100 120 Air flow volume (heating) m3/h 6000 6000 7000 Throwing range m3/h 40 40 45 Gas consumption G20 (natural gas) m3/h 7,9 10,5 12,6 Gas consumption G31 (propane) kg/h 5,9 7,9 9,5 Electrical line 230 V; 2,8 A; 550 W 230 V; 2,8 A; 550 W 230 V; 3,8A; 800W GAS LOW PRESSURE (millibar) / Indirect fired HEAT-X TYPE G AIR HEATER Direct fired - closed combustion chamber Proven robust and reliable gas technology Very high air flow and air throw Tube design combustion chamber, welding-free Efficiency exceeding 90% Double chimney for fresh air intake and outtake, flexible type ( snorkel ) Easy installation, no exhaust gas analysis needed Easy to service due to precise error indications Remote alarm or 0-10V connection through interface board Connection of separate air blower to work in synchrony Due to big openings the heat exchanger can be easily cleaned CE marked PERFORMANCES & DATA Model»Heat-X«Type 3G»Heat-X«Type 4G»Heat-X«Type 5G Heating output* kw 39-60 48-76 66-99 Air flow volume (heating) m3/h 6000 8000 10000 Throwing range m3/h 40 45 50 Gas consumption G20 (natural gas) m3/h 6,9 8,8 11,4 Gas consumption G31 (propane) kg/h 5,2 6,6 8,6 Electrical line 230V; 3.5A; 800W 230V; 3.9A; 900W 230V; 6,1A; 1.400W * Modulating with interface unit Munters AB, 2018 23

»HEAT-X«TYPE H HEAT EXCHANGER Large lamella spacing - easy to clean High-pressure cleaner-resistant fins Stainless steel tube and frame Glass-fibre reinforced plastic housing Universal applicability: Horizontal and vertical air guidance Fan Durable and efficient PERFORMANCES & DATA Type H Type 2 H Type 3 H Type 4 H Fan performance 3,000 m3/h 5,000 m3/h 7,500 m3/h Fan connected load 400V; 0.75A; 350W 400V; 1.1A; 530W 400V; 1.25A; 630W Heating medium supply / return temperature 80/60 C 80/60 C 80/60 C Duct thread connection 3/4 3/4 1 Total weight incl. water ca. 56 kg ca. 74 kg ca. 118 kg Integrated fan type / ø E450-ST-D4 / 450 E500-ST-D4 / 500 E630-FN-D6 / 630 Throwing ranges* ca. 30 m ca. 45 m ca. 55 m Air intake / capacity 30 C / 25 kw 30 C / 40 kw 30 C / 75 kw Dimensions H x B x T (mm) 700 x 760 x 766 800 x 964 x 996 1,025** x 1,197 x 1,095 Water pressure drop 0.24 bar 0.34 bar 0.25 bar Water flow 1.10 m3/h 1.76 m3/h 3.36 m3/h * Throwing ranges are approximate figures and do not take the structure into account.»heat-x«type V HEAT EXCHANGER Large lamella spacing - easy to clean High-pressure cleaner-resistant fins Stainless steel tube and frame Glass-fibre reinforced plastic housing Universal applicability: Horizontal and vertical air guidance Fan Durable and efficient PERFORMANCES & DATA Type V Type 3 V Type 4 A V Type 4 V Fan performance 5,000 m 3 /h 7,500 m 3 /h 7,500 m 3 /h Fan connected load 400V; 1.45A; 840W 400V; 2.2A; 1005W 400V; 2.2A; 1005W Heating medium supply / return temperature 80/60 C 80/60 C 80/60 C Dimensions H x B x T in mm 909 x 984 x 984 935 x 1,052 x 1,182 935 x 1,052 x 1,197 Duct thread connection 3/4" 3/4" 1" Total weight incl. water ca. 84 kg ca. 119 kg ca. 128 kg Integrated fan type / ø E500-FN-D4 / 500 E560-FN-D4 / 560 E560-FN-D4 / 560 Throwing ranges* ca. 20 m ca. 25 m ca. 25 m Air intake / capacity 30 C / 40 kw 30 C / 60 kw 30 C / 75 kw Water pressure drop 0.34 bar 0.31 bar 0.25 bar Water flow 1.76 m 3 /h 2.63 m 3 /h 3.36 m 3 /h * Throwing ranges are approximate figures and do not take the structure into account. 24 Munters AB, 2018

»REV-AL«FINNED TUBES HEAT EXCHANGER up to 30% performance increase up to 85% weight reduction (when comparing steel with aluminium) 100% easy installation by means of connection clamps High radiated power due to epoxy-coated surface Energy-saving, made of aluminium with high heat conduction Optimised surface more watts per running metre (Btu per feet) Higher resistance against ammonia Heat emission of finned tubes Heat emission in watts per running meter 700 W/m 600 W/m 500 W/m 400 W/m 300 W/m 200 W/m 100 W/m Sample galvanised steel»rev-al«light aluminium, epoxy resin-coated»rev-al«aluminium, epoxy resin-coated 0 W/m 0 K 10 K 20 K 30 K 40 K 50 K 60 K 70 K Temperature difference = Average water temperature of flow and return to room temperature. Temperature difference* The heat emission of the finned tubes has been measured in accordance with EN 442.»HEAT-X«ROTATE HEAT RECOVERY SYSTEM No dust filtration required Low pressure loss in comparison to other air-air heat exchangers in the poultry sector Fully automatic rotor cleaning Compact container construction, suitable for common lorry transports Almost no freezing issues With 70% efficiency a very high heat recovery performance Storage mass with plastic coating to satisfy the highest corrosion protection requirements Adjustable recovery performance by modification of the speed EUROVENT-certified output DIN EN 13053 PERFORMANCES Type 10,000 20,000 Dimension Exchanger package Air flow mm (inch) m3/h (cfm) 1,900 x 1,900 x 360 (74,8 x 74,8 x 14,2) 10,000 5,900 2,500 x 2,500 x 390 (98,4 x 98,4 x 15,4) 20,000 11,800 Efficiency % 65-85 % 65-85% Munters AB, 2018 25

26 Munters AB, 2018 AIR INLET

SMT24 - SMT30 - SMT36 - SMT50 INLET SHUTTER Compact design and easy installation Actuators for individual control or controlling in groups Self cleaning shutter blade profile prevents the build-up of dust Tight sealing and durable shutter blades Optional guard mesh to prevent entry of wild animals or birds Munters Protect coated steel frame and shutter blades Maintenance free and UV resistant bearings for shutter blades PERFORMANCES Model SMT24 SMT30 SMT36 SMT50 Airflow at 0 Pa m 3 /h 0 0 0 0 Airflow at 20 Pa m 3 /h 6,754 11,642 14,331 27,090 Airflow at 40 Pa m 3 /h 9,396 16,210 20,110 38,261 Airflow at 60 Pa m 3 /h 11,463 19,656 244,91 46,346 Note: airfl ow data are measured at standard conditions (20 C, 1,013hPa) LOADING VOLUMES ASSEMBLED DISASSEMBLED Model SMT30 SMT36 SMT50 SMT30 SMT36 SMT50 Container 20 ft pcs. 264 200 116 900 750 600 Container 40 ft pcs. 528 400 232 1,400 1,400 1,000 Container 40 ft HC pcs. 528 400 232 1,400 1,400 1,000 Trailer 13.60x2.40x2.60 m pcs. 616 480 277 1,800 1,650 1,150 IW CANOPY WIND HOOD Creates brown-out effect inside building Prevents heavy rain from entering building Protects inlets against environmental elements UV resistant polymer Units nest for compact transport Fits over Munters IW and similar sized inlets Suitable for inlets with dimensions up to 0.3 x 0.7 m LOADING VOLUMES Inlet quantity per Box Pallet 20' ctr. 40' HC ctr. MWI 4413 6 108 900 2160 MWI 4408 6 108 900 2376 MWI 4113 6 108 900 2160 MWI 4108 6 108 900 2376 MWI 3413 6 108 900 2160 MWI 3408 6 108 900 2376 LFD - MWI LIGHT FILTER Designed for model MWI 4413 Maximum light reduction factor Minimum resistance to airflow (2600m3/h @20Pa) Compact transport dimensions, disassembled 2pcs/box Vertical blades for easy cleaning Quick and easy assembly Includes brackets for installation on thinner walls (protruding MWI) Munters AB, 2018 27

MWI WALL AIR INLET Optimal flow of fresh air in the house, avoiding drafts and cold air drop on livestock Modular design featuring a perfect match between the size of inlet, house design and farmer needs Recessed curved door in the wall, properly channels the air jet along the ceiling and avoids air escape out the sides Packaging - unassembled 6pcs. per box, optimizes shipping volume and lowers freight cost Quick user-friendly assembly due to distinctive design, without added parts Hygienic-friendly due to the smart design and smooth surface finish Top quality durable PVC and PP materials, UV stabilized Air sealing gaskets at the top and sides to avoid air leakage in closed position Suitable for quick high pressure washing PERFORMANCES Model Inlet size* (cm) Airflow at static pressure** (m 3 /h) Wx H 10Pa 20Pa 30Pa MWI 4413 W 112 x 33 3597 5026 6155 MWI 4408 W 112 x 21 2277 3158 3867 MWI 4113 W 104 x 33 3316 4716 5721 MWI 4108 W 104 x 21 2175 3084 3724 MWI 3413 W 86 x 33 2742 3830 4671 MWI 3408 W 86 x 21 1770 2491 3082 Note: * Flange depth is 4inch or 10cm Note: ** Door fully open, without mesh LOADING VOLUMES Inlet quantity per Box Pallet 20' ctr. 40' HC ctr. MWI 4413 6 108 900 2160 MWI 4408 6 108 900 2376 MWI 4113 6 108 900 2160 MWI 4108 6 108 900 2376 MWI 3413 6 108 900 2160 MWI 3408 6 108 900 2376 IW150 - IW250 WALL AIR INLET Easy installation Manufactured in durable white UV stabilized polystyrene Main door moulded in two pieces preventing deformation Main door has an insulated core, preventing condensation on inside Integrated aluminium profiles in main door preventing warping Adjustable flap allowing fine adjustment of air flow patterns Rainstop preventing rain from entering the structure Integrated mesh in corrosion resistant polystyrene preventing wild animal entry Withstands cleaning with a high pressure cleaner and integrated pulley for support of cabling PERFORMANCES Airflow at static pressure** (m3/h) Model Airflow at -10 Pa Airflow at -20 Pa IW150 1,320 1,870 IW250 1,440 2,015 Note: airfl ow data are measured at standard conditions (20 C, 1,013hPa) Note:** DOOR FULLY OPEN, WITHOUT MESH 28 Munters AB, 2018

ZEW PROFESSIONAL WALL AIR INLET Significantly reduces the formation of ice even at extreme external temperatures Reduces energy costs massively by forgoing forced ventilation Spreads the temperature uniformly inside the stable, as the minimum air rate can be geared solely to the requirements of the animals The air conduction sheet can be adjusted in every position due to a special latching guide Transport and installation safeguard for the shutters integrated into the air conduction sheet Winter and summer position easy to set due to corresponding symbols on the inlet To avoid condensation/icing, two sealing lips are mounted on the shutter base PERFORMANCES Model ZEW Prof. 1300 ZEW Prof. 2100 ZEW Prof. 2900 Airflow at 10 Pa (m 3 /h) 1,300 2,100 2,800 Airflow at 20 Pa (m 3 /h) 1,900 3,000 4,000 Airflow at 30 Pa (m 3 /h) 2,400 3,800 5,000 Traction (N) Stroke way (mm) a.o 35 35 25 a.c 55 55 60 a.o 390 535 635 a.c 460 480 480 Note: a.o automatic opening a.c automatically closing AIRSTEP 5000 MULTI WALL AIR INLET Optimal solution for tunnel ventilation High insulation value due to integrated insulation Optimum closing and good sealing Prevention of thermal losses Optional inflow of large air flows Reduction of condensation Robust, easy to clean design PERFORMANCES Air flow (m³/h) Type 10Pa 20Pa 30Pa Pulling forces Stroke way (mm) AIRSTEP 5000/2 a.o. 6,800 9,100 11,200 80 N 400 AIRSTEP 5000/3 a.o. 10,100 13,900 17,100 120 N 400 AIRSTEP 5000/4 a.o. 13,400 18,800 23,000 160 N 400 AIRSTEP 5000/5 a.o. 17,000 23,800 29,000 200 N 400 AIRSTEP 5000/2 a.c. 6,800 9,100 11,200 60 N 400 AIRSTEP 5000/3 a.c. 10,100 13,900 17,100 90 N 400 AIRSTEP 5000/4 a.c. 13,400 18,800 23,000 120 N 400 AIRSTEP 5000/5 a.c. 17,000 23,800 29,000 150 N 400 Note: airflow data are measured at standard conditions (20 C, 1,013hPa) Munters AB, 2018 29

SAFE-LET WALL AIR INLET 15% greater volumetric flow due to integrated intake nozzle All round sealing for optimum closure Minimal thermal losses and avoidance of condensate due to integrated flap Suitable frame extension for every wall thickness (125, 250, 375, 500 mm / 4.9, 9.8, 14.7, 19.7 inch) Optimum height for the double layer thickness of agrarian bricks PERFORMANCES Air flow (m³/h) Type 10Pa 20Pa 30Pa Pulling forces Stroke way (mm)»safe-let«600 a.o. 2,900 4,200 5,200 35 N 630»safe-let«800 a.o. 3,800 5,500 6,800 40 N 630»safe-let«1000* a.o. 4,700 6,700 8,300 45 N 630»safe-let«1200* a.o. 5,500 7,900 9,700 50 N 630»safe-let«600 a.c. 2,900 4,200 5,200 85 N 280»safe-let«800 a.c. 3,800 5,500 6,800 80 N 280»safe-let«1000 a.c. 4,700 6,700 8,300 75 N 280»safe-let«1200 a.c. 5,500 7,900 9,700 70 N 280 Note: airflow data are measured at standard conditions (20 C, 1,013hPa) The inlet is suitable for electric motors: V5, V7 a.o. = automatic opening; a.c. automatic closing ; N = pulling force (already includes a deflector) SAFE-LET COMPACT WALL AIR INLET Up to 15 % more air flow due to integrated intake nozzle Adjustable air conduction sheets depending on prefered air guidance Decoupling of air guidance and air flow All round sealing for perfect closure Insulated PUR flap preventing heat losses Reduction of condensation Compact design PERFORMANCES Air flow (m³/h) Type 10Pa 20Pa 30Pa Pulling forces Stroke way (mm)»safe-let«compact 600 2,900 4,200 5,200 50 N 485»safe-let«compact 800 3,800 5,500 6,800 70 N 485»safe-let«compact 1000 4,700 6,700 8,300 90 N 485 Note: airflow data are measured at standard conditions (20 C, 1,013hPa) Height: 480 mm, Depth: 152 mm The inlet is suitable for electric motors: V5, V7 a.o. = automatic opening; a.c. automatic closing ; N = pulling force (already includes a deflector) 30 Munters AB, 2018

ZLV NEO CEILING/ROOF AIR INLET Flexible system for every type of stable and livestock quantities in diameters of Ø 650, 730, 820, 920 mm Ultra-fine fresh air distribution over a large distribution radius, also with minimal air flow rates Optimisation of the horizontal dispersion behaviour (greater throwing ranges) Danger of icing at outside temperatures down to -20 C considerably reduced All components made from thermally-insulated polyurethane PERFORMANCES Internal diameter Ø (mm) 650 730 820 920 Airflow at 10Pa (m 3 /h) 4,900 6,100 7,500 9,200 Airflow at 20Pa (m 3 /h) 6,900 8,800 10,900 13,500 Airflow at 30Pa (m 3 /h) 8,500 10,900 13,500 16,900 Airflow at 40Pa (m 3 /h) 10,000 12,700 15,600 19,500 Traction (N) 240 260 270 300 Stroke way (mm) 400 400 400 400 Air flow Equal pressure ventilation (m³/h) 10,500 15,300 20,300 20,800 ZLV VARIO CEILING/ROOF AIR INLET Flexible system for every type of stable and number of animals in diameters of Ø 650, 730, 820, 920 mm Ultra-fine fresh air distribution across a large distribution radius, also with minimal air flow rates Danger of icing also at extreme outside temperatures down to -50 C considerably reduced Winter, transitional and summer operation switch automatically (can be set centralised or decentralised) Complete closing of the recirculation gap, thereby increasing maximum fresh air capacity All components made from thermally-insulated polyurethane PERFORMANCES Internal diameter Ø (mm) 650 730 820 920 Traction (N) (N) 300 360 410 460 Stroke way (mm) (mm) 350 350 350 350 Air flow Equal pressure ventilation (m³/h) 10,500 15,300 20,300 20,800 Munters AB, 2018 31

IS600 - IS800 CEILING/ROOF AIR INLET Reduced shipping volumes and easy installation Different models for adaptation to most buildings. Multiflex roof flashing for fitting to any slope between 12 and 25 degrees. Two available diameters, 600mm and 800mm and option for use without the top section to draw air from the loft space Integral wire mesh preventing wild animal entry Solid top cover and slots at the bottom of the cone ensure rainwater protection Patented Star diffuser system ensures correct quantity and direction of incoming air Air circulator to be placed under the diffuser available as accessory Manufactured in durable white or black smooth and anti-soiling polyethylene Withstands cleaning with high pressure cleaner PERFORMANCES Model IS600 IS800 IS600 IS800 WITH CAP WITHOUT CAP Airflow at -10 Pa m 3 /h 3,357 5,843 3,647 6,946 Airflow at -20 Pa m 3 /h 4,720 8,414 5,142 9,789 Airflow at -30 Pa m 3 /h 5,770 10,285 6,500 12,150 Note: airflow data are measured at standard conditions (20 C, 1,013hPa) ACCESSORIES: LIGHT FILTERS FOR IS No light and less than 5% ventilation reduction for IS Air Inlet. 32 Munters AB, 2018

COOLING Munters AB, 2018 33

CELdek 7090-15 COOLING PAD Since 1950s, the original cooling pad Environmentally friendly with consistent high quality worldwide Ideal for short to medium length installations. Due to low pressure drop the air goes through the pad without significant resistance and operating costs (CELdek 7090-100mm at 1.5m/s and 20Pa Press.Drop) Ideal for applications located in low humidity areas Excellent cooling efficiency due to the unique design, manufacturing methods and materials used (CELdek 7090-100mm at 1.5m/s and 73% sat.eff.) High face velocity allows the air to travel through the pad without water droplet carryover Self-cleaning design due to steeper angle of unequal flute design, flushing dirt and debris from the surface of the pad Easy maintenance as it can be performed while system is still operating STANDARD DIMENSIONS Width mm 600 Height mm 1,000 1,200 1,500 1,800 2,000 Depth mm 100/150/200 DISTRIBUTION PAD CELdek 70120 Width mm 600 Height mm 30 Depth mm 100/150/200 CELdek and CELdek with MI-T-edg - Minumum order quantity CELdek Dimensions PIECES PER BOX CELdek Dimensions PIECES PER BOX 1000X600X100 mm 22 1000X600X150 mm 14 1200X600X100 mm 11 1200X600X150 mm 7 1500X600X100 mm 11 1500X600X150 mm 7 1800X600X100 mm 11 1800X600X150 mm 7 2000X600X100 mm 11 2000X600X150 mm 7 LOADING CAPACITY PIECES BOXES PALLETS PAD SIZE PALLET SIZE 20 Container 40 Container 40HC Container standard truck m 13,60x2,40x2,60h 20 Container 40 Container 40HC Container standard truck 20 Container 40 Container 40HC Container standard truck 1000x600x100 2000x1050x70 330 726 968 1144 15 33 44 52 5 11 11 13 1000x600x150 2000x1050x70 210 462 616 728 15 33 44 52 5 11 11 13 1200x600x100 1800x1050x70 264 528 792 924 24 48 72 84 6 12 12 14 1200x600x150 1800x1050x70 168 336 504 588 24 48 72 84 6 12 12 14 1500x600x100 1500x1050x70 231 495 660 748 21 45 60 68 7 15 15 17 1500x600x150 1500x1050x70 147 315 420 476 21 45 60 68 7 15 15 17 1800x600x100 1800x1050x70 198 396 528 638 18 36 48 58 6 12 12 14 1800x600x150 1800x1050x70 126 252 336 406 18 36 48 58 6 12 12 14 2000x600x100 2000x1050x70 165 363 484 572 15 33 44 52 5 11 11 13 2000x600x150 2000x1050x70 105 231 308 364 15 33 44 52 5 11 11 13 34 Munters AB, 2018

CELdek 7060-15 COOLING PAD Since 1950s, the original cooling pad Environmentally friendly with consistent high quality worldwide Ideal for long installations. Due to low pressure drop that allows high air speed across the pad without significant resistance and operating costs (CELdek 7060-150mm at 2m/s and 23Pa Press.Drop) Ideal for applications located in high humidity areas Ideal for applications with low pressure drops Excellent cooling efficiency due to the unique design, manufacturing methods and materials used (CELdek 7060-150mm at 2m/s and 73% sat.eff.) High face velocity allows the air to travel through the pad without water droplet carryover Self-cleaning design due to steeper angle of unequal flute design, flushing dirt from the surface of the pad Easy maintenance as it can be performed while system is still operating STANDARD DIMENSIONS Width mm 600 Height mm 1,000 1,200 1,500 1,800 2,000 Depth mm 100/150/200 DISTRIBUTION PAD CELdek 70120 Width mm 600 Height mm 30 Depth mm 100/150/200 CELdek WITH MI-T-edg COATING COOLING PAD Excellent cooling efficiency due to the unique design, manufacturing methods and materials used High face velocity allows the air to travel through the pad without water droplet carryover Low pressure drop allows the high velocity air to travel through the pad without significant resistance Self-cleaning design due to steeper angle of unequal flute design, flushing dirt and debris from the surface of the pad Simple to maintain due to the fact that in most cases, routine maintenance can be performed while systems still are operating STANDARD DIMENSIONS Width mm 600 Height mm 1,000 1,200 1,500 1,800 2,000 Depth mm 100/150/200 DISTRIBUTION PAD CELdek 70120 Width mm 600 Height mm 30 Depth mm 100/150/200 RCP 150 COOLING PAD Type RCP 150 CoolPads RCP consist of polypropylene and are therefore easy to clean and highly robust. Available in standard dimensions 1,500 / 1,800/ 2,000 x 600 mm, can replace standard paper pads without any problem. No rusting. All components of the frame system consist of UVresistant PVC, clips and screws produced from stainless steel No external water tank necessary Long service life Length is fl exible (up to 24 m/1 pump). Height max. 2 m. Quick and easy assembly High cooling performance COOLPAD SYSTEMS RCP 100 / 150 Dimensions (mm) 1,500 x 600 x 150 1,800 x 600 x 150 2,000 x 600 x 150 Munters AB, 2018 35

Quick and easy installation Easy maintenance and cleaning Flexible positioning of the water supply and discharge Resistant to corrosion (stainless steel 304, epoxy pre-coated galvanised steel) Designed to ensure an even wetting of the entire pad wall Stabilisation of the pad wall Fits any size of pad in height and width Available as complete system with all fitting parts Water filtration available upon request STANDARD DIMENSIONS Width mm multiple of 600 Height mm 1,205 1,705 2,005 2,205 Depth mm 100/150 * Dimensions higher than to 2.205 will be supplied with double - T profile system in order to overlap 2 Pads WDP WATER DISTRIBUTION SYSTEM PLASTIC GUTTER COOLING SYSTEM CoolPads RCP consist of polypropylene and are therefore easy to clean and highly robust. Available in standard dimensions 1,500 / 1,800/ 2,000 x 600 mm No rusting. All components of the frame system consist of UVresistant PVC, clips and screws produced from stainless steel No external water tank necessary Long service life Length is fl exible (up to 24 m/1 pump). Height max. 2 m. Quick and easy assembly STANDARD DIMENSIONS Length Pad depth (mm) Pump (W) 3 150 350 6 150 660 9 150 660 12 150 660 15 150 660 18 150 660 36 Munters AB, 2018

WDP MIST FOGGING SYSTEM Alternative to evaporative pad cooling in cold continental and moderate climates, typically characterized by very brief periods of hot weather Minimizes heat stress which improves feed conversion for increase production Optimal relative humidity in-farm throughout the year Environmental benefits by effectively suppressing dust particles from the airstream Fast cleaning operation through preparatory soaking of various in-farm equipment Corrosion resistant components, made in stainless steel Quick and easy installation Fits on any size of housing system PERFORMANCES Maximum working pressure Bar [PSI] 70 [1015] Water flow l/min [gal/h] 12.0 [190.2] 21.0 [332.9] Nozzle tip diameter mm 0.2 0.3 0.2 0.3 Maximum nozzles/pump pcs 180 110 314 193 Nozzle water flow at 70Bar l/h [gal/h] 4.0 [1.06] 6.5 [1.72] 4.0 [1.06] 6.5 [1.72] DCP30 - DCP30 TOP4 COOLING UNIT Plug & play system Pre-coated galvanised steel housing Tank manufactured in thermoplastic material Electrical motor with IP55 protection grade CELdek 7090-15 evaporative cooling pads Circulation water unit is CE approved Complete plumbing kit incorporated Electrical enclosure with safety and control switchgear Single-phase as option Additional ducting system (up to 60m length) STANDARD DIMENSIONS Model DCP30 TOP4 Length mm 1,640 1,360 Height mm 1,000 1,000 Width mm 1,520 2,500 PERFORMANCES Airflow at 0 Pa m 3 /h [cfm] 16,000 [9,415] Motor power * kw [hp] 1.1 [1.5] Cooling efficiency % 83-85 Cooling effect @ 50% RH C [ F] OUTSIDE TEMPERATURE * Three-phase electric motor as standard, single phase as options. Notes: the DCP is intended to be installed outside the building. The cooling effect mentioned above are estimates and can vary based on local conditions. DCP30 - TOP4 INSIDE TEMPERATURE 34 [93] 27 [81] 30 [86] 23 [73] 26 [79] 20 [68] Munters AB, 2018 37

38 Munters AB, 2018 ENVIRONMENTAL

MAC AIR CLEANER Ammonia reduced by 89% on average Maximum ammonia reduction from start-up Dust reduction Non-clogging filters Efficient droplet separators Droplet separators can be drawn out and washed from the outside Easy maintenance User friendly Easy to install Corrosion resistant material PERFORMANCE & DATA Ammonia reduction VERA test - Average during a year 89% Airflow Maximum 25,000 m 3 /hour at 40 Pa Maximum including fan, circulation pump, dosing pump and 4.2 kw bilge Power Electricity Weight Average Voltage Frequency Current IP Class Air cleaner without liquid Air cleaner with liquid Depends on house and management. In a layer house with 13,000 animals and one air cleaner is measured 3.4 kw on average. This also includes electricity to ventilate the first 25,000 m 3 /hour. 3x400 Volt 50 Hz 16 A IP 55 825 kg 2,325 kg Water Average water supply 300 liter/day Waste water Drainage volume Depends on installation and type of house and management. In a layer house was drained maximum 150 litrer/dag Acid consumption Sulphuric acid 96% 3 kg sulphuric acid per kg removed ammonia. In practice it has been less, as the water itself captures part of the ammonia. Munters AB, 2018 39

LAVAMATIC DRUM WASHER Uniquely rotating drum washer that cleans itself fully automatically, no pump technology needed Effective odor reduction thanks to the bio filter Operationally reliable No raw gas in the clean gas Savings of > 7,000 Euro/year (40,000 FP) in comparison to other washers in poultry farming Energy savings of up to 90 %. Low blow-down rates due to conductance at 200 ms/cm Available in 25.000 and 50.000 m 3 /h LAVAMATIC drum module The LAVAMATIC drum washer facilitates the exhaust air treatment of poultry and pig stables for example, and is supplied as a complete, prefabricated module. The LAVAMATIC system can simply be placed on the gable wall or long side of the stable. The drum washer with an air flow of 25,000 or 50,000 m³/h consists of a unique patent-registered drum washer without the use of cost-intensive circulation pumps. Furthermore, an optional biological stage is available for odour reduction. The drum washer is characterised by its very low electricity consumption due to its ability to operate without pump equipment. Ammonia drum washer for ammonia reduction The exhaust air is now guided over the unique, patent-registered drum washer. The continual rotation of the washer drum takes the wash water, which is acidified to ph3, out of the water basin and the filling material in the wash drum is moistened. Additionally, the filling material is constantly cleansed when the wash drum is immersed in the water basin. Image shows practical application in Dubai with 2 LAVAMATIC drum washers installed A wiper mounted at the top of the wash drum ensures that the coarser particles are removed from the drum s exterior. Simultaneously, the wiper is used for sealing the drum. The LAVAMATIC does not require separate washing water treatment, and this constitutes a further advantage of the technology. Elutriation takes place directly from the water basin into a separate elutriation tank. 40 Munters AB, 2018

CONTROLLERS Munters AB, 2018 41

PLATINUM PRO CONTROLLER Benefits Modular architecture enables a high level of flexibility in system design lmproved software capabilities support an unlimited number of devices and scales Simple software upgrade reduces maintenance time Programing accessories from the Platinum Pro simplifies accessory configuration Rotem s Platinum Pro Controllers is a modular farm management and control system enables farmers to administer large operations from a single controller. The Platinum Pro manages all aspects of a poultry, swine, or dairy farm (climate control, lighting, feed and water, weighing, and ventilation). Platinum Pro s unique hardware capabilities combined with the HUB greatly extends this control in a low cost manner. Features Access via the Web or Cloud Real time alarms via smartphone or Web Supports a large number of input/outputs both and analog digital A single controller supports up to 200 2HP heavy duty relays (including Expansion units) Smart On/Off/Auto override switches 16 independent heat zones Precision fogger and evaporative cooling system Failsafe emergency relay SD card and ARM CPU Multilanguage support Supports Munters Drive PLATINUM TOUCH 30 CONTROLLER Benefits User friendly large screen is easy to use & simplifies configuration, control, & monitoring your farm Modular architecture enables a high level of flexibility in system design lmproved software capabilities support an unlimited number of devices and scales Programing accessories from the Platinum Touch simplifies accessory configuration The Platinum Touch, Rotem s most advanced climate control unit, provides poultry (broiler, layer, & breeder) and livestock farmers with vastly expanded capabilities. Featuring all the functionality of the Platinum Pro Controllers, the controller s new screen provides an intuitive, easy-to-use interface that brings all the advantages of touch screens to your farm. Features All functions are fully accessible from the touch screen Access via the Web or Cloud Real time alarms via smartphone or Web Supports a large number of devices via analog inputs and outputs, and digital inputs A single controller supports up to 200 2HP heavy duty relays (including Expansion units) Smart On/Off/Auto override switches 16 independent heat zones Precision fogger and evaporative cooling system Failsafe emergency relay SD card and ARM CPU Multilanguage support Supports Munters Drive 42 Munters AB, 2018

AC 2000 3G CONTROLLER Benefits LCD graphic display enables simplified navigation between menu items Fuel saving features reduce operating costs Precision Ventilation maintains optimal environmental conditions All-in-one controller maximizes profits by managing and coordinating all devices and functions Real-time alarms inform the grower if anything goes wrong Remote control enables long distance management Extensive memory and SD card enable storing huge volumes of detailed data and log histories and simple controller upgrades AC-2000 3G, Rotem s latest addition to its lines of industry leading environmental controllers, provides a feature-rich yet cost-eff ect control solution for poultry farmers. Featuring an advanced hardware and software package, the AC-2000 3G en Features Graphic display Convenient user controls High performance measurement and control processes SD card enabling simplified software updates and profiles Support for: - CO2 control - various ventilation modes - multiple exhaust, tunnel, stir, and other fans - multiple heating methods - various types of curtains/inlets/dampers - extended lighting, feeding and watering functionalities - scale functions - extended cooling and fogging functionalities - flexible sensor assignment - 20 relays (28 when used in conjunction with an REB-8) - extended data collection capabilities - multiple languages Benefits SMART SERIES CONTROLLER Cost effective technology provides high ROI Automatic shift from minimum ventilation to tunnel ventilation ensures high air quality at any temperature User friendly software and flexible settings enable adjusting the SMART to specific local conditions Supported by Rotem PC communication software, enabling remote access and ability to supervise 24/7 SMART models vary in their number of relays and options, enabling you to find the model that meets your specific requirements Rotem s SMART Controllers provide the poultry industries with a cost-eff ective climate control solution that is easy to install, simple to program, and built to work in the rigorous conditions found in poultry houses. Features Automatic control of ventilation, cooling, and heating Support for: - Temperature and humidity sensors - Water and feed meters - Potentiometer feedback - Wind speed and direction sensor for natural ventilation - Digital inputs - Analog 0-10 VDC outputs - TRIAC for variable speed fans - History data on PC - Data plug for easy transfer of settings - Multiple language packages Munters AB, 2018 43

ROTEMNET WEB COMMUNICATION SOFTWARE COMMUNICATION SOFTWARE Complete control over your farm via a mobile phone, tablet, or PC Consistent look & feel with other Munters applications, including the PC & Tablet View & Platinum Touch Single user can control multiple farms Overview of your farms activities User customized dashboard Easy comparison of the houses main performance parameters COMMUNICATOR 2.0 Enables complete web access to controllers from any device with access to the Cloud Multiple communication pathways: Built-in internet and telephone connectivity, optional cellular connectivity Programmable alarms Alarm Messages via SMS, line & internet push notification Battery backup COMM-BOX Enables complete web access to controllers from any device with access to the Cloud Multiple communication pathways: Built-in internet and telephone connectivity, optional cellular connectivity Can be installed as an add-on to the Communicator COMMUNICATOR An alarm and communication center used by famers to monitor and control their Munters controllers and accessories Alarms and data in real time enable optimal management of your controllers, 24/7 Remote controller configuration enables centralized management of all farms from one computer Text messages ringtones ensure that you don t miss an alarm Status reports provide critical information on house functions and animal statistics Battery backup RLINK ONE WIRELESS COMMUNICATION WIRELESS COMMUNICATION Provides wireless communication between a controller network and a communication system Supports loopback signal transmission, enabling you to test antennas and locations before installing controllers or other communication units Adjustable power levels minimize signal interference from adjoining networks Improved user interface and multiple LEDs simplify troubleshooting in every aspect of signal transmission Multiple communication pathways: Built-in internet and telephone connectivity along with optional cellular connectivity Provides an effective alternative for situations a communication cable infrastructure is not feasible Multiple new features ensure RF signal quality, enable long distance transmission, and greatly simplify installation and setup 44 Munters AB, 2018

RSC-2 SE BIRD WEIGHING SYSTEM BIRD SCALE CENTER Rotem s RSC-2SE (RSC2), the advanced & friendly automa tic standalone live bird scale center, makes crucial weighing procedures easier, faster and more accurate than ever. Benefits Weighs any bird: breeders, broilers, pullets & turkeys A friendly automatic standalone system Outstanding accuracy and exceptional weighing speed Collects and calculates exact data on: - Average bird weight - Number of birds weighed - Daily weight gain - Standard deviation Features Can handle 1 or 2 bird scales 5-digit display Up to 500 days data collection 3-key programming Weight displayed in Kg. or Lb. Water & dust resistant Advanced lightning protection Power surge protection USB connection for PC communication Stainless steel hanging or floor platform High quality cables - CV - Uniformity RSW-2 FEED WEIGHING SYSTEM SILO WEIGHING SYSTEM A silo weighing control system that enables farmers to accurately control feed deliveries and feed inventory Programs for breeders, broilers, pullets, and pigs Automatic activation of delivery augers, feeders, lights, and alarms reduces your work load Automatic registration of feed deliveries, including quantity, date, and time Up to 10 feeding cycles and 10 lighting cycles per day Separate programs for male and female breeders and skip-a-day function Control of up to 2 feeding augers, 16 feeding lines, 12 load cells, and measurement of feed and water consumption LCD display, multiple operating modes and PC communication for Windows RFS-6 FEED WEIGHING SYSTEM FEED SCALE SYSTEM Precision feed control system enabling poultry growers to monitor feed flow into the chicken house accurately and continuously Specifically targeted versions for broilers, breeders and pullets are available Breeders: Manages restricted feeding procedures, distinguishes males from females, and allocates accurate quantities of feed to each feeding line at preset times Program for broilers: Feed Scale controls up to 10 light & feeding cycles per day, monitors feed consumption, and mixes 3 types of feed - adapting the mix to specific growth days Up to 10 feeding times per day Saves feed & water consumption history Alarms LCD display, multiple operating modes and PC communication for Windows SILO LOAD CELLS FEED WEIGHING ACCESSORIES Used to weigh silo cells Used in conjunction with the Farm Silo Weight or Farm Premium Controllers Complete and accurate data regarding feed contained within the silo Farm Silo Load Cells high quality ensures that it provides accurate data even under rigorous field conditions, such as high heat or humidity Rust-proof, even in wet enivronments Munters AB, 2018 45

BIRD SCALES ACCESSORIES Easy to install 3 component poles, easily adjusted to the required height Maintains its high standards: operates in the rigorous conditions found in poultry houses. Aluminum-based, the RBS-H SE is rust-free and lighter. RBS H SE along with its accessories comes in a smaller, better packed container, resulting in lower shipping costs Supported by Platinum and AC-2000 Poultry controllers Optional hanging or floor layout CO2 SENSORS ACCESSORIES The CO2 Sensor measures CO2 in a bird or animal house, prompting ventilation when the specs fall outside of the user-defined specifications. The CO2 Sensor has a range of 0-5000 PPM and is accurate to +/- 3%. HUMIDITY The RHS+ Humidity Sensor measures relative humidity from 0-100%, with up to 98% accuracy. When the humidity is too high, controllers initiate ventilation. In the case of malfunction, only the sensor tip needs to be replaced TEMPERATURE Temperature Sensors provide data used in a variety of controller functions. They operate from -60 to + 160 C, are accurate to 0.3%, and have an extremely long lifespan. AMMONIA Ammonia Sensor detects ammonia gases in livestock and poultry barns. When used in conjunction with the controllers, the sensors enable ventilation programs that maintain the air quality. The sensor can detect ammonia from 0 to 100 ppm NH3. EGG COUNTER ACCESSORIES Provides essential data for Breeders and Layers poultry operations. Accurately counts eggs as they are transported on conveyers or egg belts Mounting brackets enable a simple installation on the conveyer Comes in various sizes, making it suitable for any operation. Comes in the following sizes, making it suitable for any operation: 100 cm, 75 cm, 50 cm, 30 cm, 20 cm 46 Munters AB, 2018

RDT-5 DIGITAL THERMOSTAT A cost effective backup controller that operates during a primary controller failure or during extreme temperatures Ensures animal survival in cases of extreme temperatures or power disruptions. No software required to run the Farm Back Up, ensuring service even in the event of a controller failure Monitors and controls important data while operating heaters or fans in the event of a failure DIGITAL THERMOSTAT RBU-27 SE BACK UP SYSTEM US Market Only The RBU-27 has 27 heavy duty relays, up to five thermostats, and four delay times. The RBU-27 is a five stage backup consisting of two heating stages and three cooling stages. Each stage is powered from its own circuit breaker. LED indicators on the front panel indicate which stages are currently active. The RBU-27 can be expanded to include up to eight heaters and 16 fans. The unique design provides a greater control in choosing the ventilation method, testing equipment, and emergency climate control (Latch On/Off function). BACK UP SYSTEM RLED 2.0 LIGHT DIMMER LIGHT DIMMER Two independent channels Manual brightness control Compatible with any LED bulb type Programmable brightness control by analog signal 0-10 VDC or by communication line in case of Farm Premium controller Automatic settings recovery after power failure Automatic settings save for each mode Minimum and maximum light intensity settings Automatic shut down timer Slave device option Optional interface with most Munters controllers RPS-5 STATIC PRESSURE SYSTEM STATIC PRESSURE SYSTEM Microprocessor based controller State of the art pressure sensor Static pressure measured in inch/column water, Pascal or mbar Outside temperature and Winter/Summer pressure setting Manual over-rides High &low static pressure alarm Inerasable memory Time delay to avoid over reaction on windy days Adjustable inlets opening / closing step times Easy installation and operation Interlock for fans and curtains Munters AB, 2018 47

NOTES

NOTES

DEALER PORTAL www.aghorttools.com Munters Dealer Portal is the exlusive resource of information and documentation dedicated to our Dealers. On this new spot you will find product information, manuals and other technical documents, case studies, marketing material, training presentations and soon a calculation tool and price catalogues. For more information: info.aghort@munters.com Munters AB, 2018