Queensland distributor Urban lighting luminaire TRILOGA Registered models - Design Massimo Sacconi
TRILOGA is a product with a strong design, featuring essential geometric lines that set it apart from the rest, perfect for integration in modern urban areas. TRILOGA is offered in two different sizes from 4m to 7m applications. TRILOGA, available with street and symmetrical optics in the LED and discharge versions, creates a pleasant atmosphere in squares and pedestrian areas. TRILOGA 1 for SHP and MHL lamps up to 0W and CPO lamps up to 140W*. TRILOGA 2 for SHP and MHL lamps up to 250W and CPO lamps up to 140W*. TRILOGA LED features the LED Comfort Light Optic TM system. EXEMPT GROUP *All the maximum powers shown are for ST optics. TRILOGA TECHNICAL DATA SHEET 2
TRILOGA HID MECHANICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Support base in die cast aluminum alloy UNI EN 1706 with profiles and upper part in extruded aluminium EN AW - UNI EN 5. Top cover in moulded aluminum UNI EN 485. Black colour (code 02). EPDM seal. Insulation class: I, II. Power supply: 2V - 50Hz. Electronic or ferromagnetic power supply unit, efficiency EEI = A3. Superimposed pulse ignotor with timer upon request. Connection for cables featured by a maximum cross section of 4mmq. Integrated on-load switch for luminaries in class II. Anti burst capacitor. Ceramic lamp holder. Available dimming options: please visit the relevant section for TRILOGA in the website. High transparency closure screen in flat tempered glass (4mm thickness). Power factor: > 0.9 (at full load). Optical unit in pure anodized and polished aluminum (99.85%). Removable metal gear plate. Integrated cable clamp. Fixing system in die cast aluminium alloy UNI EN 1706. Fast unfastening system in stainless steel. IP66 protection degree. TRILOGA HID TECHNICAL DATA SHEET 3
Available versions - HID TRILOGA 1 HID TRILOGA 2 HID 625 100x100 140x140 0 850 0 TRILOGA 1 WATTAGES LAMP TYPE LAMP HOLDER OPTIC 50W SHP-T E27 ST-S 70W SHP-T E27 ST-S 100W SHP-T E40 ST-S 0W SHP-T E40 ST-S 50W MHL-E E27 ST-S 70W MHL-E E27 ST-S 100W MHL-E E27 ST-S 0W MHL-E E27 ST-S W CPO-TW* PGZ12 ST-S W CPO-TW* PGZ12 ST-S W CPO-TW* PGZ12 ST-S 140W CPO-TW* PGZ12 ST-S 50W CDO-TT E27 ST-S 70W CDO-TT E27 ST-S 100W CDO-TT E40 ST-S 0W CDO-TT E40 ST-S 35W CDM-T G12 ST-S 50W CDM-T G12 ST-S 70W CDM-T G12 ST-S 100W CDM-T G12 ST-S 0W CDM-T G12 ST-S For CDO-TT lamps, please, order SHP wiring. *Only available with electronic power supply unit. TRILOGA 2 WATTAGES LAMP TYPE LAMP HOLDER OPTIC 70W SHP-T E27 ST-S 100W SHP-T E40 ST-S 0W SHP-T E40 ST-S 250W SHP-T E40 ST-S 70W MHL-E E27 ST-S 100W MHL-E E27 ST-S 0W MHL-E E27 ST-S 250W MHL-E E40 ST-S W CPO-TW* PGZ12 ST-S W CPO-TW* PGZ12 ST-S 140W CPO-TW* PGZ12 ST-S 70W CDO-TT E27 ST-S 100W CDO-TT E40 ST-S 0W CDO-TT E40 ST-S 250W CDO-TT E40 ST-S 70W CDM-T G12 ST-S 100W CDM-T G12 ST-S 0W CDM-T G12 ST-S For CDO-TT lamps, please, order SHP wiring. *Only available with electronic power supply unit. TRILOGA HID TECHNICAL DATA SHEET 4
NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) TRILOGA HID optic AVAILABLE OPTICS ST: asymmetrical optic for street lighting. S: symmetrical optic for urban lighting. ST ST ST ST Angoli Gamma 100W SHP-T 180 120 50 50 100 0 200 250 0 Street lighting Q5-LO2 ST 250W SHP-T Please, download TRILOGA HID photometric data at www.aecilluminazione.com Angoli Gamma 0W SHP-T 180 120 80 80 1 240 320 400 Q5-LO2 ST 250W SHP-T 0 Street lighting S S S S Angoli Gamma 70W SHP-T 180 120 120 180 240 0 Q5-LO2 ST 250W SHP-T 0 Urban lighting 250W SHP-T Angoli Gamma 180 120 120 180 240 0 0 Urban lighting Q5-LO2 ST 250W SHP-T TRILOGA HID TECHNICAL DATA SHEET 5
TRILOGA LED MECHANICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Support base in die cast aluminum alloy UNI EN 1706 with profiles and upper part in extruded aluminium EN AW - UNI EN 5. Top cover in moulded aluminum UNI EN 485. Black colour (code 02). EPDM seal. High transparency closure screen in flat tempered glass (4mm thickness) on each LED module. Optical unit in high efficiency metallised polycarbonate. Insulation class: I, II. Power supply: 220-240V - 50/Hz. LED current: 525/700mA. Power factor: > 0.9 (at full load). Connection: connector for cables featured by a maximum cross section of 2.5mmq. Integrated overvoltage protection: Impulse withstand voltage: 7kV common/differential mode for CLASS I. Impulse withstand voltage: 4kV common/differential mode for CLASS II. Integrated SPD, Type II, In = 5kA, Imax = 10kA, Uoc = 10kV Optional fuse: 10A 250V gl.. Optical unit lifetime 525mA: 70.000hr B20L80 (including critical failures) 100.000hr L80, TM-21; 700mA:.000hr B20L80 (including critical failures) 100.000hr L80, TM-21. Available dimming options: DA: automatic adjustment of the light flow. DAC: customizable DA profile. PLM: power line communication light flow adjustment. Removable metal gear plate. Integrated cable clamp. Fixing system in die cast aluminium alloy UNI EN 1706. Fast unfastening system in stainless steel. IP66 protection degree. TRILOGA LED TECHNICAL DATA SHEET 6
Available versions - LED 0 TRILOGA LED TRILOGA 1 625 AVAILABLE SIZES: TRILOGA 1 18 LED 36 LED TRILOGA 2 54 LED 72 LED OPTICAL UNIT CHARACTERISTICS: Modular optical system. Led light source colour temperature: 4000K. CRI: minimum 70. AVAILABLE OPTICS: ST: asymmetrical optic for street lighting. OC: asymmetrical optic for pedestrian and cycle paths lighting. S: symmetrical optic for urban lighting. 0 100x100 ST Gamma Angles 120 180 0 TRILOGA 2 0 0 0 0 0 0 Street lighting OC Gamma Angles 120 180 200 850 200 400 0 800 0 Pedestrian and cycle path lighting 140x140 S Gamma Angles 120 180 80 80 1 240 320 400 0 Urban lighting NERO e GRIGIO per marchi piccoli (ha il filo ingrossato) Please, download TRILOGA LED photometric data at www.aecilluminazione.com TRILOGA LED TECHNICAL DATA SHEET 7
Protection against over voltage In order to improve both the performance and reliability of its products, AEC pays particular attention to the protection against overvoltage. Thanks to the research performed within its own test laboratories, AEC is now able to offer dedicated and customized solutions according to the system selected by the customer. AEC offers two different types of wiring and related protective devices: CLASS I: protection 7kV.* CLASS II: protection 4 kv. CLASS II + SPD: protection 4kV and surge arrester integrated into the unit. AEC experience concerning LED technology permits to define the limits of reliability and to propose our customers better safety solutions according to the characteristics of the system. The minimum requirements imposed by the product standards in the field of surge protection may, in some cases, be insufficient: for this reason AEC provides a variety of additional protections. For further information please visit www.aecilluminazione.com. Click LED section on the menu and discover more about reliability & safety. * For standard luminaires TRILOGA LED TECHNICAL DATA SHEET 8
TRILOGA - Poles 10 9 8 PT POLES DESCRIPTION Square cross section steel pole consisting of one single section. Cable inlet slot and terminal box slot. FINISH Hot galvanized in accordance with UNI EN ISO 1461, and subsequent brushing to ensure perfect surface finish. Polyester powder coating. COLOURS Code 01, 02, 03, 04, RAL on request. 7 6 5 4 H 3 D1 A1 Measures in metres H available luminaire heights P H2 H1 T A2 Section TRILOGA TECHNICAL DATA SHEET 9
Installation examples For more information about AEC Pole Division poles, please, consult the catalogue The Best in Pole Design. PT PT PT PT TRILOGA TECHNICAL DATA SHEET 10
The information contained in this catalogue aren t binding. In order to guarantee a continuos updating of its products, AEC reserves itself the right to modify the contents without notice. AEC Illuminazione Srl I-52010 Subbiano - Arezzo - Italy Via Righi, 4 - Zona Industriale Castelnuovo Tel. +39 05 041110 Fax +39 05 420878 aec@aecilluminazione.it www.aecilluminazione.com