UMWELTSIMULATION TEMPERATUR VARIO Walk-in chambers in modular design for multifunctional applications in different industrial fields
UMWELTSIMULATION TEMPERATUR UMWELTSIMULATION TEMPERATUR With the Vario series, an optimised, cost-effective modular construction with reduced delivery times is ensured, without jeopardising high quality and reliability standards. In modular construction, prefabricated sandwich elements are geometrically defined, joined together to form a sturdy and thermally insulated test chamber housing and efficiently adapted to suit the respective requirements by other functional modules. Vario is based of the following four basic constructional and functional elements: 4. USER INTERFACE placed near the door in ergonomic height It includes: - Emergency STOP push button - Colour-Touch-panel programmer/controller - interface RS 232/422 (software optional) - Ethernet interface 1. CHAMBER CONSTRUCTION 2. AIR HANDLING SYSTEM ADVANTAGES OF THE MODULAR DESIGN 1. Reduction in the delivery time for chamber production 2. Improved cost-effectiveness of the equipment 3. Possibility to use the same combination of plant unit and air handling system in walk-in chambers, which have: - different geometry - different temperature rates - different minimum and maximum temperature limits - different thermal load 4. Easy to assemble on site 5. Easy to disassemble, relocate and rebuild the equipment, if necessary 6. Possibility to upgrade or refurbish existing facilities by using the plant unit / air handling system / user interface without requiring major reconstruction work vapour tight prefabricated panels interior stainless-steel 1.4301 exterior galvanized steel panels, plastic coated Insulation thickness: 120 mm PUR-foam, CFC-free suitable for disassembling and rebuild on another place, if necessary 3. PLANT UNIT includes the switch cabinet, cooling unit and humidification system well arranged and easy to maintain placed in a robust casing, made by robust aluminium frame and galvanized steel panels placed on the ceiling, near the back wall of the test space equipped with powerful fans, heaters, heat exchanger, humidification- and dehumidification system, Pt-100 temperature sensors, capacitive humidity sensor STANDARD CONFIGURATION Colour Touch Screen Panel Under-temperature / over-temperature limiter Interface RS 232/422 Ethernet Port 1 auxiliary contact (specimen) Interior (test space / floor) stainless steel (mat.-no. 1.4301) Water-cooled condenser Germ-free vapour humidification system for germ-free humidification *) OPTIONS Double-Wing Door (2000 x 2000 mm) Observation window in the door (450 x 450 mm) Porthole (Ø 80 mm / Ø 150 mm) Air-cooled condenser Auxiliary contacts Capacitive humidity sensor *) lnternal light *) climatic chambers Noise insulation Software Winkratos The chambers are modifiable with a lot of other options. 2 2 3
UMWELTSIMULATION TEMPERATUR UMWELTSIMULATION TEMPERATUR CLIMATIC WORKING RANGE TEMPERATURE WORKING RANGE Type description (for example): 10/95 % R.F. -70/+80 TCZ 4010 A1 range of performance (defined temperature range) 100 90 80 Tmax +80 Test space volume (in m³) 70 Minimum temperature (-40 C) Climatic Chamber (C), Temperature Chamber (T) Test room capacity Internal dimensions (W x D x H) 10 m 3 2120 x 1820 x 2560 mm 16 m 3 2120 x 3000 x 2560 mm 30 m 3 3300 x 3640 x 2560 mm Temperature ( C) 60 50 40 30 20 10 0 10 20 30 40 50 60 70 rel. humidity (%) 80 90 100 Tmin -70 Time 40 m 3 3300 x 4820 x 2560 mm Cooling units / power element ( W x D x H) (installed on the external back wall) Air handling system (W x D x H) (installed on the ceiling, near by the back wall of the test space) A1 / A2 1150 x 1000 x 2180 mm 1650 x 700 x 560 mm B1 / B2 2000 x 1200 x 2180 mm 2050 x 700 x 560 mm C1 / C2 2000 x 1200 x 2180 mm 2750 x 700 x 560 mm Temperature range / Temperature variation rate (according to IEC 60068-3-5) 1) Power level cooling unit Test space Test space capacity 10 m 3 16 m 3 30 m 3 40 m 3 A1 2,7 1,1 2,0 0,8 1,2 0,5 1,0 0,4 B1 5,2 1,9 3,8 1,4 2,5 0,9 2,1 0,8 C1 5,5 2,0 5,5 2,0 3,7 1,4 3,0 1,2 A2 2,7 1,5 2,0 1,1 1,2 0,7 1,0 0,5 B2 5,2 2,6 3,8 1,9 2,5 1,3 2,1 1,0 C2 5,5 2,8 5,5 2,8 3,7 1,9 3,0 1,6 1) Temperature variation rate (K/min) in the temperature range -30 C / +80 C, Climatic working range: 10-98 % r.h., humidity control system: capacitive probe or optionally psychrometric probe Temperature range +80 C/-30 C Temperature range +80 C/-40 C Temperature range +80 C/-65 C Temperature range +80 C/-70 C Heating up Cooling down CONTROL SYSTEM USER INTERFACE DOCUMENTATION Key-Kratos Plus colour-touch screen panel PID control through PLC Updated hardware and software working together to give much faster control Software User friendly data input via touch screen panel Memory capacity to 1000 cycles with 350 segments (on compact flash) Real time recording of temperature and humidity versus time (LOG on compact flash) USB interface for stick or printer Ethernet Port Recordings in CSV format for easy export to Excel, program files are easily convertible into graphic format A trend chart for recorded variables available with a scale from -100/+200 Four traces: temperature set point, actual temperature, humidity set point, and actual humidity User friendly data input during editing, check and administration of cycle The system is available in 6 languages: English, German, Italian, Spanish, French, Dutch Hardware STN technology 3 types of memory support for storing cycles, recordings and alarms Compact Flash, Pendrive (USB key style), Internal memory Touchpanel Key-Kratos Plus trend chart (Temperature synopsis) 4 4 5
UMWELTSIMULATION TEMPERATUR CONTROL SYSTEM CUSTOMISED SOLITIONS UMWELTSIMULATION TEMPERATUR CUSTOMISED SOLUTIONS PC-Software Winkratos Ability to add notes on the graphs Delayed start of the tests Optimized view of synoptic graphs Two editing modes: entry-level and advanced Teleservice My Angel optional Software Winkratos notes on the graphs Climatic chamber for testing automotive Climatic drive-in-chamber with sunlight-simulation. system-components. Temperature chamber for testing electronic systems Complete test centre with soak-rooms and in different temperature zones. performance test bench. Climatic chamber for testing large items. Rolling dynometer for brake testing. THE UTK PRODUCT SPECTRUM INCLUDES FURTHERMORE Temperature- and climatic test chambers Vacuum test chambers Walk-in and drive-in temperature- and climatic test chambers High-vacuum test chambers / Space simulators Vibration test chambers Temperature- and Climatic units Test chambers with sunlight simulation Chambers (internal and external) for tempering / Sand- and dust test chambers Rain test chambers conditioning of existing rooms Customised special solutions Dry corrosion test chambers Temperature-shock test chambers (air-air / liquid-liquid) 6 7
15-77-022/6,500,300-135-58/0715 KreatiFabrik.de ATT Umweltsimulation GmbH Hafnerstrasse 59 72131 Ofterdingen, Germany ph. +49 (0) 7473-95870-0 fax +49 (0) 7473-95870-111 info@att-uws.de www.utk-umweltsimulation.de