Visao HIGH-SPEED OTOLOGIC DRILL CATALOG
Visao High-Speed Otologic Drill with the Integrated Power Console (IPC ) System High speed and torque 80,000 rpm max speed provides rapid, yet precise bone removal Cool running Water-cooled motor keeps the handpiece from overheating during long procedures 1
Created for neurotology 20 degree curved burs are specifically designed for working in tight, deep anatomic spaces Ergonomic Well-balanced and lightweight titanium body is easy to maneuver 33-3435 Extended Bur Guard with Irrigation 33-3425 Extended Bur Guard without Irrigation Easy assembly Snap fit reusable bur guards and quick locking burs make the Visao ideal for busy teaching institutions 2
Visao Curved Burs Use at speeds up to 80,000 rpm 4.0mm 3.0mm 2.0mm 90 mm 31154090E 31153090E 31152090E Fluted 115 mm 311740115E 311730115E 311720115E Flutes 8 10 90 mm 31184090E 31183090E 31182090E Diamond 115 mm 311940115E 311930115E 311920115E Diamond Grit 120/140 140/170 Coarse 90 mm 31204090E 31203090E 31202090E Diamond 115 mm 312140115E 312130115E 312120115E Diamond Grit 40/0 0/80 80/100 Visao Cochleostomy Burs Use at speeds up to 80,000 rpm 2.0mm Fluted 98 mm Flutes Diamond 98 mm Diamond Grit 98 mm Curved Bur 3
1.5mm 1.0mm 311715115E 311710115E 311910115E 90 mm Curved Bur 1.5mm 1.0mm 31151598E 31151098E 31181598E 115 mm Curved Bur 0.mm 0.5mm 31181098E 3118098E 31180598E 325/400 325/400 4
Visao Straight Burs Use at speeds up to 80,000 rpm Medium Working Length Long Working Length 23 mm X-Long Working Length 7 mm mm 5 mm 4 mm Medium 31317057U 3131058U 31315059U 3131405U Fluted Long 313150U 3131408U X-Long 31314075UE Flutes 12 10 8 8 Medium Working Length Long Working Length 23 mm 23 mm X-Long Working Length mm 5 mm 4 mm Medium 3113058 31135059 3113405 Diamond Long 311305 311350 3113408 X-Long 312158 3121584 Diamond Grit 120/140 120/140 120/140 Medium Working Length Long Working Length 23 mm X-Long Working Length mm 5 mm 4 mm Medium 3111058 31115059 3111405 Coarse Long 311105 311150 3111408 Diamond X-Long 31114075 Diamond Grit 40/0 40/0 40/0 5
3.5 mm 3 mm 2.5 mm 2 mm 1.5 mm 1 mm 3131355UE 3131305UE 3131255UE 3131205 3131155 313110 3131358U 3131309U 3131259 31312070 31311570 31311071 31313575UE 31313075UE 31312575 31312075 31311575 31311075 8 10 8 3.5 mm 3 mm 2.5 mm 2 mm 1.5 mm 1 mm 0.5 mm 3113355 3113305 3113255 3113205 3113155 311310 311305 3113358 3113309 3113259 31132070 31131570 31131071 31130571 31103075 31102575 31102075 31101575 31101075 31100575 140/170 325/400 140/170 3.5 mm 3 mm 2.5 mm 2 mm 1.5 mm 1 mm 3111355 3111305 3111255 3111205 3111155 311110 3111358 3111309 3111259 31112070 31111570 31111071 31113075 31112575 31112075 31111575 31111075 0/80 0/80 80/100 100/120 140/170 0/80
Other Shape Burs Other Shape Burs 1 per box Use at speeds up to 52,000 rpm Acorn Fluted Oval Fluted Pear Fluted Pear Coarse Diamond.9 mm.0 mm 5.0 mm 5.5 mm.0 mm.0 mm Medium 3132954 3132055 3132505 31255558 3123058 Long 312555 312304 312404 Flutes 8 8 8 14 14 Grit 100/120 7
8
Ordering Ordering Information Information 1898001 Integrated Power Console 1898430 Integrated Power Console Multifunction Footpedal 3334800 Visao High-Speed Otologic Drill 333425 Visao High-Speed Otologic Drill Extended Bur Guard Without irrigation 333435 Visao High-Speed Otologic Drill Extended Bur Guard With irrigation 3334895 Visao High-Speed Otologic Drill Sterilization Tray 1897821 US Power Cord, meter 1897510 Pole Basket for Footswitch 3318503 Irrigation Tubing Set, Sterile, 4/box 331850 Hi-Speed Drill Coolant Tubing Set, 2/bx 9
Visao High-Speed Otologic Drill Cleaning and Sterilization Instructions These products must be available for proper cleaning of the Visao drill: 311200, Medtronic ENT Cleaning Solution, 1 each 3112500, Chuck Brush Cleaner, 0/pack Complete these steps. 1. Prior to sterilization, wipe the drill and cable with a clean cloth soaked in enzymatic detergent solution. (Medtronic ENT Cleaning Solution 311200 and distilled water are recommended for best results.) 2. A chuck brush cleaner (3112500) or appropriately sized bristle brush may be inserted into the distal end of the Visao drill, irrigation sleeves and bur guards. 3. Rinse out the distal end of the drill. DO NOT IMMERSE! Shake out excess water. Rinse the irrigation nozzles and motor housing after use (distilled water is recommended for best results). 4. Clean and dry the instrument tray. 5. Dry the drill, cable, irrigation sleeve and bur guards thoroughly. Place them in their respective slots in the instrument tray. Automated Cleaning validation consists of a minimum 44 minute total time; including pre-wash; main wash and rinse; and thermal rinse. Thermal rinse shall be at least 10 minutes long at a minimum temperature of 0º. Warnings 1. Do not immerse! 2. Do not use an ultrasonic cleaner! 3. Do not use organic solvents, such as isopropyl alcohol or acetone, to clean drill! 4. Heating above 149 C (300 F) may damage the handpiece and will void the warranty. Sterilization Exposure Times Steam Autoclave/Gravity 121 C minimum (250 F) 40 minute cycle, minimum 8 minutes dry time (or until visibly dry) Steam Autoclave/Pre-Vacuum 132 C minimum (270 F) 4 minute cycle, minimum 8 minutes dry time (or until visibly dry) Sterrad Sterilization (Sterrad 100S compatible) Only the drill is compatible Irrigation sleeves and bur guards are not compatible Ethylene Oxide Concentration: 00+/-25mg/L Sterilization: 54 C to 55 C (129 F to 131 F) Relative Humidity: 0+/-5% Aeration: 48 C to 52 C (118 F to 12 F) for 8 hours Exposure Time: (full cycle) 120 minutes Wrap: A standard, sterilization wrap may be used. In the US, an FDA approved surgical wrap must be used. Wrap tray using appropriate method. Ensure that the pack is large enough to contain the instrument without stressing the seals. Instruments may be loaded into dedicated instrument trays or general purpose sterilization trays. Ensure that cutting edges are protected. 10
For more information, contact your Medtronic NT sales representative or refer to www.medtronic.com. Medtronic Powered Surgical Solutions 420 North Beach Street Fort Worth, TX 7137 USA Internet: www.medtronic.com Telephone: 817-788-400 Toll-free: 800-43-2773 Fax: 817-788-401 AUTHORIZED REPRESENTATIVE IN EU: Medtronic B.V. Earl Bakkenstraat 10, 422 PJ Heerlen The Netherlands Caution: Federal (USA) law restricts this device to sale by or on the order of a physician. Refer to product package insert for instructions, warnings, precautions and complications. LIT250021EN.RNew 2008, Medtronic, Inc. Registered mark of Medtronic, Inc.