Evoke.7 Square Downlight Downlight Features The Evoke.7 Downlight features the fit, finish and attention to detail of the existing Evoke line that you ve loved since its introduction in. With the current advancements in lighting technology Evoke.7 delivers the performance, energy savings and color you expect from a spec-grade LED downlight. Impressive performance, high lumen delivery and consistent color for sustainable lighting designs. Product Overview Fixture Type: Recessed Downlight Wattage:,,, 9 Color Temp: K, 7K, K, K, K CRI: 8 typ. (7K, K, K, K) + typ. (K, 7K, K, K) Crisp LED Available K Class A LED Available : ELV & TRIAC (V/77V) Lutron Hi-lume H Series/EcoSystem - % dim with soft on, fade to black, V/77V -V (V/77V) - % Dim DALI dimming Fixture Type Round/Square New Construction Trim Trimless Yes Yes Yes Yes See separate spec sheet for Round trim Trimless Performance Chart Watts Delivered Lumens LPW CBCP Color Temp 98 7.9 7, K-8,7 7. 8,8 K-8, 7.,8 K-8 9, 7., K-8 Data is based on K-8 IES files available on website Data is base on Spot optics See pages - for other performance data Title Compliant Electrical Data W W W* 9W* System Watts Amps System Watts Amps System Watts Amps System Watts Amps v...8 9. 77v...8 9. Electronic constant current LED driver *Includes thermal protector, w power consumption LIT-99 //8 Page of 8
Housing/Frame Ordering Information Model For New Construction E.7S-NC-A7 (New Construction) E.7S-CP-A7 (Chicago Plenum W, W, & W only) E.7S-IC-A7 (Insulated Ceiling/air tight W, W, & W only) Style T - trimmed TL - trimless (not available for use with Grid ceiling) Wattage 9 (not available for use with CP or IC housing) Voltage 77 /77 (for use with IC housing only) (for non-dimming, select LE/TE option) LE/TE - TRIAC/ELV dimming HILUME-H-ECO - Lutron Hi-lume H Series, EcoSystem, % dim with soft on, fade to black -V - -V dimming; % dim DALI - DALI dimming; % dim Options EM - emergency battery pack with remote test switch (not available for use with CP or IC options) Trim Ordering Information E.7SD-A7 Model E.7SD-A7 Style T - trimmed TL - trimless (not available for use with Grid ceiling) Finish For Trimmed Fixture MWW - matte white, white flange MBW - matte black, white flange SLVW - matte silver, white flange MBB - matte black, black flange For Trimless Fixture MW - matte white MB - matte black SLV - matte silver Beam Spreads SP - spot, FL - flood, WF - wide flood, VWF - very wide flood, 7 Color Temp 8 CRI + CRI 7-7K-8 9 - K-+ CRISP - Crisp - K-8 79-7K-+ CLA - K Class A - K-8 9 - K-+ - K-8 9 - K-+ Options/Accessories WET - wet location (for trimmed fixture only) SOL - solite lens The "A" refers to the sequential revision in a year and "XX" refers to the year of update. Updates coincide with improved performance while not changing the overall fixture aesthetic and are reflected in the published performance data. Please contact your Amerlux representative for explanations of changes. LIT-99 //8 Page of 8
Specifications Application Commercial and hospitality ambient lighting Housing Construction ga. galvanized steel frame Formed aperture plate with /8 lip Integral adjustable locking mounting bars Thermally protected (W & 9W) Die-cast lamp housing and heatsink Reflector Construction Die-cast aluminum seamless self-flanged trim Steel mounting ring with spring clips Optical Beam Spreads: Spot, ; Flood, ; Wide Flood, ; Very Wide Flood, 7 Optional Solite aperture lens LED Color Temp Options: K, 7K, K, K, K CRI: 8 typ. (7K, K, K, K) 9 typ. (K, 7K, K, K) Crisp* LED available Class A** K (high CRI, high gamut) R9 Values: (8 CRI), (9 CRI) Binning: MacAdam (SDCM) *Crisp: Crisp Technology delivers the warmth of colors expected from a high CRI solution but also creates the natural crisp white color that is pleasing to the eye. It creates the most impactful lighting ever available, by revealing the richest whites and vibrant colors that pop. ** Class A LED: Class A LED s have a CRI > 8 and a GAI > 8. CRI defines color Naturalness and GAI defines color Saturation. Both being high delivers rich colors and pure whites. Electrical Wattage:,,, 9 Electronic constant current LED driver, V/77V input This product complies with IEEE C. for surge endurance up to.kv. Amerlux recommends using additional surge protection with this unit (supplied by others), surge damage is not covered under warranty. s LE/TE - Leading Edge, TRIAC, forward phase/trailing Edge, ELV, reverse phase -V, Lutron and DALI systems also available See pages 8-9 for more dimming information Finish Powder coat paint Consult factory for custom finishes Mounting Hanger bars included Consult factory for hanger bars greater than Trimmed Fixture: For use in grid or sheetrock ceilings, max ceiling thickness Trimless Fixture: For use in sheetrock ceilings, max ceiling thickness /8 Certifications CSA approved to UL standards as tested by CSA Damp location Chicago Plenum (CCEA) option (W, W & W only) IC/AT rated option (W, W & W only) Wet location option (adds clear lens and trim gasket) Title compliant (W & W only) Warranty year limited warranty LIT-99 //8 Page of 8
Evoke Square Downlight: / / / / / / min - max Trimmed Trimless Optional CP or IC/AT housing Optional CP or IC/AT housing / /8 / / / /8 / Optional Solite / lens location / / / 8 / 8 Optional Solite lens location Ceiling cut out: / 8 dia. Ceiling cut out: / 8 dia. Plaster Frame Installation Detail (for trimless fixture only). Reflector Trim. Aperture plate. Ceiling. Cast Aluminum Plaster Frame. Plaster Skim Coat (by others). - Type F Thread Cutting Screw LIT-99 //8 Page of 8
Evoke Square Downlight: FIXTURE DATA: (Complete photometric data (.ies format) available upon request) MULTIPLYING FACTORS: (Multiplying Factor is based on K-8 V IES file on website) Wattage: W W W 9W *For 9W data see page Factor:.8.. * CCT: 7K-8 K-8 K-8 K-8 Factor:.9... CCT: K-+ 7K-+ K-+ K-+ CRISP CLA Factor:.7.8.8.87..7 W LED, K-8 Spot (SP) Distribution, º LTL #8 Lumens:,7; 7. Lm/W Flood (FL) Distribution, º LTL#8 Lumens:,87; 7. Lm/W Wide Flood (WF) Distribution, º LTL # 8 Lumens:,8; 7. Lm/W 7 7 7 7 88 7 9 88 7 9 8 9 7 7 8 9 Application Data: Wide Flood Flood Spot o Aiming Angle Horizontal Footcandles. 9.. 7. 8.9.9. 9.9.9. 9... 9.. 7. 8...... 9... 8.7.8 7..7.7. 9 7.7 7.7. 9. 9.7 W D L FC Notes and Definitions: Beam spread is to % center beam candlepower (CBCP). D=Distance to floor or wall. FC=Footcandles on floor or wall at center beam aiming location. L=Effective Visual Beam length in feet (% of maximum footcandle level). W=Effective Visual Beam width in feet (% of maximum footcandle level). CB=Distance across or down to center beam location. LIT-99 //8 Page of 8
Evoke Round Downlight: FIXTURE DATA: (Complete photometric data (.ies format) available upon request) MULTIPLYING FACTORS: (Multiplying Factor is based on K-8 V IES file on website) Wattage: W W W 9W *For W data see page Factor:. *.7. CCT: 7K-8 K-8 K-8 K-8 Factor:.9... CCT: K-+ 7K-+ K-+ K-+ CRISP CLA Factor:.7.8.8.87. 9W LED, K-8 Spot (SP) Distribution, º LTL #89 Lumens:,; 7. Lm/W Flood (FL) Distribution, º LTL#88 Lumens:,9; 77. Lm/W Wide Flood (WF) Distribution, º LTL # 87 Lumens:,; 77. Lm/W 7 7 7 7 8 7 99 89 8 7 8 7 Application Data: Wide Flood Flood Spot o Aiming Angle Horizontal Footcandles... 7. 8....9.9. 98... 7.. 7. 9... 88...... 8.7.7 7. 9... 8 7. 7.. 9. 9. W D L FC Notes and Definitions: Beam spread is to % center beam candlepower (CBCP). D=Distance to floor or wall. FC=Footcandles on floor or wall at center beam aiming location. L=Effective Visual Beam length in feet (% of maximum footcandle level). W=Effective Visual Beam width in feet (% of maximum footcandle level). CB=Distance across or down to center beam location. LIT-99 //8 Page of 8
DIMMING COMPATIBILITY: Amerlux Evoke fixtures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlux recommends testing your unique dimming configuration as the exact full configuration (Dimmer, Fixture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BELOW IS FOR WIRED DIMMERS ONLY. FOR WIRELESS DIMMERS, CONSULT FACTORY --- TRIAC (Forward Phase) DIMMING (Standard) Utilizes Standard incandescent dimmers that are in wide use in installations across the US. Best for retrofit applications where TRIAC dimmers are installed. V or 77V* Dims down to less than % light output (most cases) Consult manufacturer for installation instructions - DO NOT SHARE NEUTRALS! Must meet dimmer Minimum Load Requirements per dimming manufacturer Wall Box (Incandescent Style, Wattage as required) Lutron Diva Lutron Vareo Lutron Nova-T Lutron Skylark Lutron Maestro TRIAC Wiring Diagram TRIAC Control Green Lutron GP Panel Lutron Grafik Eye QS ELV - Electronic Low Voltage (Reverse Phase) DIMMING (Standard) Utilizes specialized ELV dimmers. Best for New Construction applications ELV Wiring Diagram V or 77V* Dims down to less than % light output (most cases) ELV Consult manufacturer for installation Control instructions - DO NOT SHARE NEUTRALS! Must meet dimmer Minimum Load Requirements Wall Box (ELV Style) Lutron Diva Lutron Nova-T Lutron Maestro Leviton Surslide Lutron Vareo Lutron Skylark Leviton Vizio Green Lutron GP Panel with PHPM-PA Interface Lutron Grafik Eye QS with PHPM-PA Interface -V - DIMMING (--V Option) Integrates into a variety of building management and daylighting controls -V Wiring Diagram V or 77V* Dims down to % light output Requires interface to turn off power to driver Consult manufacturer for installation instructions - DO NOT SHARE NEUTRALS! -V Control Gray Purple Green -V (-) -V (+) Switched Hot Wall Box Lutron Diva - DVTV with PP- H Interface Leviton Renoir II -v Lutron Grafik Eye with GRX-TVI Interface * is 77V dimmable with appropriate dimmer (by others). All provided wiring diagrams show V wiring colors and method. Please refer to 77V dimming installation instructions for 77V wiring diagrams. LIT-99 //8 Page 7 of 8
DIMMING COMPATIBILITY: Amerlux Evoke fixtures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlux recommends testing your unique dimming configuration as the exact full configuration (Dimmer, Fixture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BELOW IS FOR WIRED DIMMERS ONLY. FOR WIRELESS DIMMERS, CONSULT FACTORY --- LUTRON H-SERIES / ECOSYSTEM (-HILUME-H-ECO Option) Integrates into Lutron EcoSystem building management EcoSystem Digital Control Wiring Diagram V or 77V* Dims down to less than % light output EcoSystem Control Consult manufacturer for installation instructions - DO NOT SHARE NEUTRALS! Wall Box DIVA Maestro Nova T Vareo E E EcoSystem Control (Cap off Orange wire) Purple Stripe Purple Orange Green ECOSYS Bus E E Dimmed Hot Switched Hot Lutron EcoSystem compatible controls DALI DIMMING (-DALI OPTION) Digital control protocol allows individual fixture control DALI Wiring Diagram V - 77V* Dims down to % light output in most cases Wall Box (-Wire Fluorescent) Leviton CD Controller DALI Control DALI Bus Purple Purple/WT Green Dynalite Fifth Light EMERGENCY DIMMING (-EM OPTION) Wiring Diagram Unswitched Hot Common LED Load AC LED LED LED Output Output Blue Wall Switch Thermal Protector WT/ WT/BLK Blue Yellow/BLK Yellow E L F M E F le ER D le x D G x RI A EN B V C ER Y Violet Brown Violet Brown W-ITS Converter Connector Test Switch * is 77V dimmable with appropriate dimmer (by others). All provided wiring diagrams show V wiring colors and method. Please refer to 77V dimming installation instructions for 77V wiring diagrams. LIT-99 //8 Page 8 of 8