WINS001 Plastics : fittings valves Dimensions : Wall thickness, diameter, angle, length EN ISO 3126 NBN T42-402 (1978) WINS002 Plastics Longitudinal reversion NBN EN ISO 2505 NBN EN 743 (1994) NBN T42-603 -2 NBN EN 13244-2 (2002) NBN EN ISO 15875 DVGW W320 DVGW GW335-B2/ NBN T42-104 (1989) NBN T42-105 (1992) NBN T42-106 (1986) NBN T42-110 (1980) NBN T42-601 (1976) NBN EN ISO 15875 DIN 8075 / 8078 / 8080 DIN 16833 DIN 16892 DIN 16968 DVGW W320 NBN T42-104 (1989) NBN T42-105 (1992) NBN T42-106 (1986) NBN T42-111 (1989) M:\accreditatie\FORMS\scope-v13-EN-2016.docx p. 1/8
WINS003 Plastics : fittings valves Resistance to internal pressure NBN EN ISO 1167-1/2/3/4, NBN EN 917, DIN 8075, NBN EN ISO 13846, NBN EN 921 (1995) ASTM D 1598 Resistance to slow crack NBN ISO EN 13479 (SCG) growth of a notched pipe (notch test) Resistance to gas constituents WINS004 Plastics Resistance to external blows by the round-the-clock method and by the staircase method WINS005 Plastics Density (immersion method) WINS006 Plastics Vicat softening temperature (VST) (Annex A) EN 1555-1 NBN EN 744, ISO 3127 NBN EN 1411 NBN EN ISO 1183-1 NBN T42-406 (1980) NBN EN ISO 306, NBN EN 727, ASTM D 1525 ISO 2507-1/-2/-3 NBN T 42-603 ISO 10838-1/2/3 (2000) NBN T 42-603 NBN EN 13341 NBN T 42-603 NBN EN ISO 15875 DVGW W320 /-B2/- B2-B1 NBN T 42-104 (1989) NBN T 42-105 (1992) NBN T 42-106 (1986) NBN T 42-110 (1980) NBN T 42-110 (1980) NBN EN ISO 14632 NBN T 42-110 (1980) NBN T 42-601 (1976) NBN T 42-110 (1980) NBN T 42-601 (1976) M:\accreditatie\FORMS\scope-v13-EN-2016.docx p. 2/8
WINS011 Plastics fittings, Visual assessment of the NBN EN ISO 580 structured-wall effect of heating ISO 12091 (oven test) WINS013 Plastics Melt mass-flow rate (MFR) WINS016 PE Resistance to rapid crack propagation (S4 test) WINS021 Plastics Tensile properties : yield strength, tensile strength, strain at break NBN EN 763 (1994) NBN EN ISO 1133-1, ASTM D 1238, DIN 53735 (1988) ISO 4440 (1994) NBN T 42-603 NBN EN 1455 NBN EN 13341 NBN EN ISO 14632 EN ISO 13477 NBN EN 13244 NBN EN ISO 527-1/2/3/4/5, NBN EN ISO 6259-1/2/3 ASTM D 638 or comparable NBN T42-401 (1986), NBN EN 638 (1994), DIN 53455 (1981) NBN EN 13341 NBN EN 1565 NBN T 42-601 (1976) DVGW W320 /-B2/ NBN T 42-104 (1989) NBN T 42-105 (1992) NBN T 42-106 (1986) /-B2/ NBN EN ISO 14632 ASTM D4894 10.7 ASTM D4895 NBN T 42-104 (1989) NBN T 42-105 (1992) NBN T 42-106 (1986) M:\accreditatie\FORMS\scope-v13-EN-2016.docx p. 3/8
WINS022 Tensile test on assemblies (pipe/pipe or pipe/fitting) Polyolefin assemblies with electrofusion joints, butt fusion joints or mechanical fittings ISO 13951 ISO 17885 NBN EN 712 ISO 10838-1/2/3-8.3.1-9.3.1 (2000) WINS023 WINS024 WINS025 PE electrofusion or heated tool saddles PE electrofusion or heated tool saddles PE electrofusion sockets Tear test for saddle assemblies ISO 13956 DVGW GW335-B2/ Crush test ISO 13955 NBN T42-010 Peel decohesion test for electrofusion assemblies WINS026 PE Determination of the tensile strength of test pieces from a butt-fused joint WINS027 WINS034 Thermoplastics, thermosetting or fibre reinforced materials Assemblies in PEX, PP, PB, PVC-C or multilayer Determination of flexural properties (3 point load): flexural stress, displacement, module Slow speed tensile test ISO 13954 NBN T42-010 ISO 13953 NBN T42-010 NBN EN ISO 178 NBN EN ISO 14125 BUtgb approval guideline for thermoplastics pressure piping systems, version of 18/10/2007 NBN T42-010 NBN T42-011 NF 136 NF 136 DVGW GW335-B2/ NBN T42-011 DVGW GW335-B2/ NBN T42-011 DVGW GW335-B2/ M:\accreditatie\FORMS\scope-v13-EN-2016.docx p. 4/8
WINS035 WINS038 WINS040 PE, Oxidation induction time NBN EN 728, fittings, (OIT) NBN EN ISO 11357-6 valves PE, PVC or PP, Structured-wall Fused membranes of PE, PVC or reinforced Determination of the ring stiffness Peel test on fused membranes plastics WINS041 PE valves Pressure testing leak tightness WINS042 PE valves Operating torque, stop resistance and actuation mechanism resistance WINS043 PE valves Resistance to bending between supports WINS044 PE valves Leaktightness and ease of operation after tensile loading WINS045 PE valves Resistance to thermal cycling ISO/TR 10837 (1991) EN ISO 9969 NBN EN 12814-4 ISO 5208-4 Annex A -4 Annex A NBN EN 28233 ISO 8233 NBN T 42-105 NBN T 42-106 -4-4 -4-4 NBN EN 12100-4 -4 ISO 10933-4 -4 NBN EN 1704, NBN EN 12119-4 NF 136 /-B2/ -4-4 -4 M:\accreditatie\FORMS\scope-v13-EN-2016.docx p. 5/8
WINS046 PE valves Integrity after an external NBN EN 1705-4 -4 blow -4 WINS047 PE valves Leaktightness under and after bending applied to the operating mechanism WINS049 Plastics and structuredwall Test methods for leaktightness of elastomeric sealing ring type joints NBN EN 1680-4 -4 NBN EN 1277 NBN EN 1455 WINS050 Metallic wire Tensile test on metallic wire NBN EN ISO 6892-1 NBN EN 10002-1 (2002) WINS051 Structured-wall Determination of dimensions of perforations prnbn T42-113 prnbn T42-115 WINS052 WINS057 Thermoplastics fittings PE with mechanical joints Determination of impact resistance Resistance to thermal cycling (mechanical joints) WINS060 PE valves Leaktightness angular range NF T 54-972 NBN EN 12061 ISO 17885 ISO 3458, ISO 3503 ISO 10838-1/2/3-8.2, 9.2 (2000) -4 NBN EN 1565 WINS061 Plastics for drinking water and gas Homogenity M:\accreditatie\FORMS\scope-v13-EN-2016.docx p. 6/8
WINS062 WINS063 Plastics : Pipes, Fittings, valves WINS066 WINS067 WINS070 WINS071 PE, Pigment dispersion or ISO 18553 PE fittings, carbon black dispersion PE valves /B2 PVC profiles for windows and doors PVC profiles for windows and doors PVC profiles for windows and doors Structured-wall Appearance No test standard, see product standards Heat reversion NBN EN 479 NBN EN 12608 Resistance to impact by external blows Appearance after exposure at 150 C Ring flexibility NBN EN ISO 13968 EN 1446 (1996) NBN EN 477 NBN EN 12608 NBN EN 478 NBN EN 12608 M:\accreditatie\FORMS\scope-v13-EN-2016.docx p. 7/8 DIN CERTCO, ZP 14.3.1 NBN EN 1565 DIN 8075 DIN 8078 DIN 8080 NBN EN ISO 15875 DVGW GW335-B2/ DIN CERTCO, ZP 14.3.1 DIN 16833 DIN 16892 DIN 16968
WINS072 Porous paving Vertical load test : PTV 828 3.3.1/3.3.2 PTV 828 compressive strength and deflection WINS073 Porous paving Tensile strength of PTV 828 3.3.4 PTV 828 connection WINS074 PE electrofusion fittings Safety time of the fusion cycle NF T 54-969 NF 136 Eandis specification G003 WINS076 Mechanical resistance of NBN T 42-605 4.4 mechanical plastics saddles Plastics ancillary fittings for concrete piping systems for non-pressure underground drainage and sewerage Plastics ancillary fittings for plastics piping systems for non-pressure underground drainage and sewerage WINS079 PE Preparation for electrofusion welding WINS081 Plastics Regression curves, calculation of the long-term hydrostatic strength + classification NBN EN 13598-1 Annex B.3.1, followed by NBN EN 1277 Condition A at 1,0 bar water pressure ISO 11413 EN 1555-5/-7 NF 136 NBN EN ISO 9080 NBN EN ISO 12162 DVGW GW355-B2/ M:\accreditatie\FORMS\scope-v13-EN-2016.docx p. 8/8