INTRODUCTION The Graduate is the latest addition to our range of recessed LED luminaires and has been designed for ultimate flexibility and performance. The range can be installed into the vast majority of ceiling systems and can be supplied in multiple sizes and a variety of lumen outputs to suit any application. In addition to this the fully adjustable central optic can be lowered to a semi recessed position to further enhance the in-direct distribution onto walls and ceilings. Incorporating the very latest LED chip technology this versatile new range is the ideal choice for the modern retails environment. Now available with white tunable. APPLICATION Hotel/Leisure Retail SPECIFICATION Construction Robust steel housing powder painted BS OOE55 60% gloss white. T: 01747 858100 E: sales@dexretail.co.uk Page 1 of 8
Precoat while aluminium gullwing reflectors. High transmission extruded prismatic diffuser. Injection moulded polycarbonate end caps with adjustable bracket for flush or semi recessed mounting. Performance Available in a wide range of lumen outputs. Available in 600 600 and 1200x600mm variants. 4000K colour temperature as standard, 3000K available on request. Philips Lumileds LM80 verified: 90% LED lumen maintenance at 60,000 operating hours. Philips Lumileds LM80 verified: B10 10% of LED s will exceed 10% lumen depreciation at 60,000 operating hours. Standard Deviation Colour Match 3 Step Macadam s Ellipse. LOR up to 76% L2 compliant* ECA Compliant* *specific variants only Control H High frequency analogue dimming 1-10v S Switch dimming D Digital dimming A Digital addressable lighting interface WT White Tunable, Lumen outputs vary, please contact our sales department for details. Emergency Integral three hour standard maintained, self-test or auto-test. Installation Fully assembled and ready to install with no requirement for on site assembly. Back flap offers simplified access to the terminal block for hard wiring. Can be supplied with optional Wieland panel mount and plug and play accessories. Can be supplied with pre-wired leads of your choice to minimise installation times. Variations Pull up versions for plasterboard and concealed fix ceilings available on request. IMAGES Product Images T: 01747 858100 E: sales@dexretail.co.uk Page 2 of 8
Project Images T: 01747 858100 E: sales@dexretail.co.uk Page 3 of 8
TECHNICAL GRDR 600x600 GRDR 1200x600 T: 01747 858100 E: sales@dexretail.co.uk Page 4 of 8
GRDP 600x600 GRDP 1200x600 WARRANTY All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time. Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and credit given against defective product returned. The course of action taken will be at our discretion and dependent on the nature of the defect. The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5 years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components only for the final 2 years. PROTEC LED FR 8W GU10 luminaires and all Emergency LED ranges such as LED 3, EXI, HBE, OAT, OEZ, AME, OEH and TWS * are exempt from the 5 year warranty and are supplied with 1 year warranty only. PROTEC LED COB luminaires are supplied with a two year warranty for replacement luminaires only. All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or unsuitable environmental conditions. It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not be issued against returned products. No consequential losses incurred resulting from any defect with our product will be reimbursed. Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are supplied with a twelve month warranty only. 5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where T: 01747 858100 E: sales@dexretail.co.uk Page 5 of 8
failures exceed the component manufacturers expected failure rate and lumen depreciation. If you require any assistance with regards to our products please do not hesitate to contact our Customer Services department on 01747 858100. *The LED4 Emergency LED range is supplied with a three year battery warranty and 5 year luminaire warranty. ORDER CODES Luminaire s Circuit Wattage Llm/w GRDR L19 OPTPA C84 Graduate LED, Lay In, 600x600mm, 1432 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 13.6w 105 GRDR L24 OPTPA C84 Graduate LED, Lay In, 600x600mm, 1789 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 16.5w 108 GRDR L38 OPTPA C84* Graduate Led, Lay In, 600x600mm, 2798 Lumen, Opal TPA Diffuser, Colour 84 25w 111.5 GRDR L48 OPTPA C84 Graduate Led, Lay In, 600x600mm, 3546 Lumen Opal TPA Diffuser, Colour 84 32.2w 110 GRDR L57 OPTPA C84 Graduate Led, Lay In, 600x600mm, 4198 Lumen, Opal TPA Diffuser, Colour 84 35.4w 118.5 GRDR L76 OPTPA C84 Graduate Led, Lay In, 600x600mm, 5619 Lumen, Opal TPA Diffuser, Colour 84 45.3w 124 GRDR 126 L38 OPTPA C84 Graduate Led, Lay In, 1200x600mm, 2876 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 22.1w 130 GRDR 126 L48 OPTPA C84 Graduate Led, Lay In, 1200x600mm, 3642 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 29.1w 125 GRDR 126 L76 OPTPA C84* Graduate Led, Lay In, 1200x600mm, 5735 Lumen, Opal TPA Diffuser, Colour 84 46.2w 124 GRDR 126 L96 OPTPA C84 Graduate Led, Lay In, 1200x600mm, 7001 Lumen, Opal TPA Diffuser, Colour 84 55.3w 127 GRDP L19 OPTPA C84 Graduate LED, Pull Up, 600x600mm, 1432 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 13.6w 105 GRDP L24 OPTPA C84 Graduate LED, Pull Up, 600x600mm, 1789 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 16.5w 108 GRDP L38 OPTPA C84* Graduate Led, Pull Up, 600x600mm, 2798 Lumen, Opal TPA Diffuser, Colour 84 25w 111.5 GRDP L48 OPTPA C84 Graduate Led, Pull Up, 600x600mm, 3546 Lumen, Opal TPA Diffuser, Colour 84 32.2w 110 GRDP L57 OPTPA C84 Graduate Led, Pull Up, 600x600mm, 4198 Lumen, Opal TPA Diffuser, Colour 84 35.4w 118.5 GRDP L76 OPTPA C84 Graduate Led, Pull Up, 600x600mm, 5619 Lumen, Opal TPA Diffuser, Colour 84 45.3w 124 GRDP 126 L38 OPTPA C84 Graduate Led, Pull Up, 1200x600mm, 2876 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 22.1w 130 GRDP 126 L48 OPTPA C84 Graduate Led, Pull Up, 1200x600mm, 3642 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 29.1w 125 GRDP 126 L76 OPTPA C84* Graduate Led, Pull Up, 1200x600mm, 5735 Lumen, Opal TPA Diffuser, Colour 84 46.2w 124 GRDP 126 L96 OPTPA C84 Graduate Led, Pull Up, 1200x600mm, 7001 Lumen, Opal TPA Diffuser, Colour 84 55.3w 127 Lay In Pull Up *Compliant with BSEN 12464 3000 candela limit. Dimming Options H High Frequency Dimming (Analogue 1-10v) S Switch Dimming A Digital Addressable Lighting Interface (DALI) D Digital Dimming (DSI) WT White Tunable, Lumen outputs vary, please contact our sales department for details Please click here for full details on our white tunable offer Lighting Control RLI Dextra Reacta-Link System RLS Reacta-Link daylight and presence detection sensor T: 01747 858100 E: sales@dexretail.co.uk Page 6 of 8
STR Reacta Link Emergency Please click here for full details on our wireless controls. Emergency E3 3 Hour Integral Emergency ST3 Self Test AT3 Autotest Emergency STR Emergency Reacta-Link Miscellaneous AH25 Air handling 25 litres per second C34998 & C3793 1M 6 Pole Blue / Black Lead and Besa Connection Plate C34997 & C3792 1M 4 Pole Lead and Besa Connection Plate C34996 & C3791 1M 3 Pole Lead and Besa Connection Plate
Graduate LED (Pull-up and Lay-in) Installation 230-240V / 50-60Hz IP20 IK00 1 5.0 Installation for Pull-up version WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 : specification for general requirements and tests. It should be installed by a suitably qualified person in accordance with IEE. CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed. NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE WARRANTY. 2 Pre-install the pull-up bracket/ lumafix (x4) as shown. Reflector Remove both reflectors. Lumafix bracket 3 4 Adjuster the diffuser to the position (higher or lower) as required. Typical celling grid Higher position Place the luminare in the celling, adjust the Lumafix positions as needed. Lower position 5 6 Wire the mains cable to the Terminal Block. Replace the reflectors. Installation complete. DIL490005_B Installation for Layin version Do steps 1 and 3. Place the luminaire in the celling grid. Then do step 5. 04/01/16